Mirage 5.0 - Web Manager - initialization.

Similar Questions

• To access the Mirage Web Manager

  I just installed version 4.2 and the new Web Manager.

  Access to the queue of the portal via http:// Servername/Explorer or http:// Servername/AdminExplorer works very well.

  But http://Servername/HorizonMirage to access the Web Manager does not work.

  This is the error: (from the Server Web Manager, Mirage Admin account)

  HTTP 403.14 - forbidden error

  The Web server is configured to not list the contents of this directory.

  
  

  Server:

  Server 2008 R2 SP1

  4.2 Mirage

  IIS7

  NetFramework 4

  Any ideas?

  It s not the same problem tjb627 a.-> http://communities.vmware.com/message/2254496

  It can access the Web Manager, but can not connect.

  Try this workaround:

  http://www.viewgeek.com/blog/?p=8

  Linjo

• Isass.EXE - Security Accounts Manager initialization failed OXC0000001 to start Windows XP

  Original title: Isass. EXE-SYSTEM ERROR MESSAGE IS ON AN ANOTHER COMPUTER & WON "T START.

  This is the error message when I turn on computer ISASS. EXE-system error Security Accounts Manager... Intialzation failed due to the following error: a device attached to the system is not fuctioning - OXC0000001 error status

  Jacqui T Hi,.

  (1) since when are you facing this problem?

  (2) remember to make changes to the computer before this problem?

  This problem may occur if the file Security Accounts Manager (SAM) is damaged or missing.

  Step 1: You can follow the steps mentioned in the article below

  Error message "Security Accounts Manager initialization failed" when you start Windows XP

  http://support.Microsoft.com/kb/316751

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• PowerConnect 2824: Can't access web management using VLAN TAG 1?

  Let's say I have port 20, which is a member with LABEL of VLAN 1, 10 and 20.

  If I try to access web management to help interface VLAN 1 TAG, it is not accessible.  However, if I remove the tag VLAN (and the default PVID value of 1), then it works fine.

  Is this a known limit?

  In addition, change the management VLAN on my 2824?  (what I read, it is not possible)

  You're right about the two statements.  The Web GUI is accessible only through the untagged VLAN 1 and it is not possible to change the management VLAN on the 2800 Series switches.  On the other upper level switches, you can use the ip address command vlan xx to move the management VLAN in the VLAN specified in the statement.

  I hope this helps.

• Cannot install After Effects CS6 for Mac running Yosemite 10.10.3. Tried to run the update, does not. Tried the update of the application Manager initialization failed. Referred to as Support Advisor, abandoned.

  Cannot install After Effects CS6 for Mac running Yosemite 10.10.3. Tried to run the update, does not. Tried the update of the application Manager initialization failed. Referred to as Support Advisor, abandoned.

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• Type 'Oracle.Web.Management.OracleWebEventProvider' cannot be instantiated

  
  I am using Microsoft Patterns and practices Enterpriese library with SharePoint and Oracle databases. In my SharePoint web.config file, if is set to WSS_Medium trust, I get the following error shows:
  
  Configuration error
  Description: An error occurred during the processing of a configuration file required to service this request. Check the specific error below information and modify your configuration file of appropriately.
  
  Parser error message: Type 'Oracle.Web.Management.OracleWebEventProvider' cannot be instantiated with a partially trusted security policy (AllowPartiallyTrustedCallersAttribute is not present on the target assembly).
  
  Source error:
  
  [No relevant source lines | http://forums.oracle.com/forums/]
  
  Source file: machine.config line file: 175
  
  But, if I change it to full, everything works. I "ve been trying and trying to get this to work, but no matter what I do in the config files, I can't get rid of this error." Any help is greatly appreciated.
  
  Thank you
  
  

  Currently the ASP.NET providers do not support partially trusted callers it is why you are not able to use them in another trust to full trust levels. Next ODAC version go that they support partially trusted callers. You can still post your questions related to ASP.NET providers in Oracle providers for ASP.NET .

  In addition, ODP.NET supports partial trust callers.

• Re: Satellite L870-124 web camera initialization failed

  When we arrived first of all our laptop, we have managed to find the web camera. We used it, but now I'd like to try Skype. The web camera is not found.
  On the start menu, it appears under "all programs" Toshiba"'media and entertainment'"web camera application. When you try to use it, we get a message saying that he was unable to initialize.

  I tried to download the drivers to go [here | http://www.toshiba.co.uk/innovation/download_driver_details.jsp?service=UK&selCategory = 2 & selFamily = 3 & selSeries = 180 & selProduct = 7478 & selSh ortMod = 3399 & language = 13 & selOS = 30 & selType = 315 & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = 8 & selectedLanguage = 13 & type = 315 & page = 1 & ID = 81921 & DISO = 30 & driverLanguage = 42] still but I got the same message.

  I tried to read forum entries that seem to be similar problems, but I do not understand some of the answers. Can someone advise me in plain English, please. ?

  Hello

  What webcam status appears in the Device Manager?
  The webcam feature is marked with a yellow exclamation point or it does not appear in Device Manager?

  As far as I know, the webcam can be enabled and disabled in the BIOS.
  So would recommend checking the status of the webcam in the BIOS too.
  Press F2 to enter the BIOS (when starting) go to advanced-> Control Panel settings
  You should see the webcam enable / disable option

• Satellite L870-124 web camera initialization failed.

  When we arrived first of all our laptop, we have managed to find the web camera. We used it, but now I'd like to try Skype. The web camera is not found. On the start menu, it appears under "all programs" Toshiba"'media and entertainment'"web camera application. When you try to use it, we get a message saying that he was unable to initialize.

  I tried to download the drivers from here but always got the same message.

  My husband has managed to find the webcam in the BIOS by pressing F2 when the computer has just been turned on. It has been shown as active, so it isn't that.

  I looked at how to find the Device Manager and have now found in the control panel under system and security. There is nothing here that looks like a web camera, not even by pressing the view and looking in hidden devices

  I tried to read forum entries that seem to be similar problems, but I do not understand some of the answers.

  I tried pressing FN and F9, Mine isn't a small sign of the camera. That didn't seem to do anything.

  Can someone advise me in plain English, please. ?

  Hi Joanmiller,

  Thanks for posting your query in Microsoft Community.

  From your problem description, I understand that you cannot open the web camera, a message saying: could not initialize.

  I imagine the inconvenience that you are experiencing. I would like to see what more I can do to help our end.

  Follow these methods and see if that fixes the problem.

  Check if the webcam is listed under imaging devices.

  Method 1: run the hardware and devices troubleshooter. Refer to this link:

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Try to use Windows Live Messenger and check if you can access the webcam.

  Refer to this link: using a webcam

  http://Windows.Microsoft.com/en-in/Windows7/using-webcam

  Method 3: Refer to the suggestions from this link:

  How can I fix my webcam?

  http://forums.Toshiba.com/T5/video-display-Knowledge-Base/How-can-I-fix-my-webcam/Ta-p/281393

  System Restore Warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this helps. If the problem persists, or if you have questions related to Windows please get back to us. We are happy to help you.

• HP LaserJet 1300n web manage password

  I have a LaserJet 1300n that I manage the Web. However, a password was set on it and the previous system administrator never documented it. Is there a way I can clear the password by removing a jumper PIN or something like that? If so, where that PIN is located? I took the panels the printer off the power but can't see anything on the circuit that looks like a jumper PIN. Any help is appreciated.

  You can't do it with just about any rider, but you can do a reboot cold on the printer and will hopefully all empty.

  I do not have access to the manual right this moment, but I found the following online:

  These smaller models have either have a
  module network connected via a USB cable or
  It is directly connected to the rear. In both cases
  you will see a small black button on the device. If
  It is connected with a USB cable, there is a
  plugged AC adapter. Unplug it
  power adapter hold down the black button and
  reconnect the power, press and hold the button for
  10 seconds, the lights on the device
  Flash and then stay on. Once they are on
  You can press the black button quickly and you will have
  get a configuration page.
  If the module is directly in the printer using the
  same procedure but turn the printer off and then
  turn it back on by holding the small black button located in.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• Web management interface of LAN N3000

  sHello,

  We have replaced our old 62xx powerconnect with a new stack of switches N3000.  With the earlier material, there is no remote management interface. Thus, we were able to manage the passage of our LAN subnet.

  If I put interface OOB in our LAN subnet so I can't send IP to the VLAN. ... .

  How to be able to administer our N3000 switch via web gui of our LAN subnet.

  I tried to address ip configuration for vlan1 in the hope that I would be able to gui for managing web... .but not...

  Console >Activate

  Console #Configure

  Console (config) #interface vlan 1

  Console #ip 192.168.0.250 address 255.255.255.0

   

  Can you please help?
  

  Thank you for reading my post.

  Gmiga.

  recently had this problem,

  you don't need the OOB port so just set his IP and the gateway to something, that you'll ever need (or just leave no configured completely make sure you it is disconnected/disabled)

  what you were doing with the VLAN is correct, simply set the gateway:

  Console > activate

  Console #configurer

  Console (config) #interface vlan 1

  Console (Config-if) #ip address 192.168.0.250 255.255.255.0

  output console #.

  Console (config) #ip - default gateway 192.168.0.1

  by setting the default gateway, you should now be able to administer your switch to other subnets

  You may have already worked to this point, but it is good to leave it here for others.

• Web Manager SG300 - 28 p and SG300-52 - fans

  Hello.

  2 questions:

  (1) I have a Cisco SG300 - 28 P. I intend to add a SG300-52. Is it not possible to manage the new switch through the web browser SG300 - 28 p?

  (2) there are 2 fans in the model of POE SG300 - P. 28, Fans of how they are in the no POE switch SG300-52?

  Thank you

  There is a tray application tools called Cisco FindIT, which automatically detects all small business products (and other) in a network and their aa shows a tab in the browser. By clicking on one of the discovered elements, it runs directly in the user interface of this product. Details are provided here:

  https://supportforums.Cisco.com/community/NetPro/small-business/FindIT?view=overview

  The number of fans in the different models is indicated on the data sheet:

  http://www.Cisco.com/en/us/prod/collateral/switches/ps5718/ps10898/data_sheet_c78-610061.html

  Ivor

• Adobe Lightroom and Adobe Application Manager initializer freezes in Windows 10 with the error code 43

  as in above question I can't download Lightroom because of the failure of initializer to progress beyond 10% approximately. Same problem when you try to download and install the new copy of Adobe Application Manager.

  The machine is HP laptop Pavilion Entertainer. Last week is managed on the basis of download Photoshop CC without any problem.

  Moving to the cloud creative download & install

  Hello

  Please visit CC errors FAQ: How can I fix the Code 43 error when installing Adobe Creative Cloud?

  Hope that helps!

  Kind regards

  Sheena

• Get error "the mirage server is inaccessible...". ' When configure Gateway of mirage of the web console server

  Hi all

  I tried to deploy mirage in my demo environment gateway server, when I console configure gateway server web form mirage, I get the error mirage server is inaccessible, but I can ping and telnet miage 8000 server port, we can advice?

  You can use the default port, but you must enable SSL to use the gateway of the edge.

  Check that VMware Mirage 5.1 Documentation Center

• Portal and management console Mirage 4.4.2 upgrading and file do not work

  Hey there

  Don't know what I did. Upgraded to 4.4.2 and now the file Portal is therefore more accessible. Get this page cannot be displayed.

  Worked before I upgraded. Any help appreciated.

  With 4.4.2 presents us the SSL only for the Web management console and file. Therefore, activate the SSL in IIS that see the link below.

  Documentation Centre for the Mirage 4.4 horizon

• Satellite L650 - camera initialization failed Web

  Hello

  I have a Satellite L650. I got it for a little less than 6 months and the other day, I turned on the computer to find the webcam pop up message saying "Web camera initialization failed etc... "I have also noticed that the microphone in too no longer works.

  I uninstalled it and re installed the driver, and it still does not.

  I was wondering if there is anyone who can help or has had the same problem?

  See you soon,.
  Dylan.

  Hi Dylan,.

  You can use the internal webcam with other applications like Skype?
  Have you installed the correct Satellite L650 webcam driver?
  What operating system you are using?

  If you have already reinstalled the driver for the webcam I advise to use CCleaner tool. It is a very nice freeware tool that can check your registry for the old registry keys and delete. If this cleaning software nice s to improve performance a bit and solve problems. Just use Google to find this program.

  Check this box!