Portal and management console Mirage 4.4.2 upgrading and file do not work
Hey there
Don't know what I did. Upgraded to 4.4.2 and now the file Portal is therefore more accessible. Get this page cannot be displayed.
Worked before I upgraded. Any help appreciated.
With 4.4.2 presents us the SSL only for the Web management console and file. Therefore, activate the SSL in IIS that see the link below.
Documentation Centre for the Mirage 4.4 horizon
Tags: VMware
Similar Questions
-
Right click mouse to drag and drop or rename folders and files does not work
For a few weeks now, I had problems with the right click function to drag - move files and folders, or rename files and folders. This happens when I use windows Explorer or access to the computer and click thruogh for a feature. He can't go to all the folders and files, but many. I can't right click on these folders or files to change the sharing because explore closes and restarts on the desktop with a right-click. Manifest error "appcrash" reason. I have Norton Security suite installed and neither Norton or your fix program detects a problem.
Please notify.
awehnert
Have you installed or removed/uninstalled all hardware or software or drivers since just before the start of this problem (if so, exactly what - name, version, device, whatever)? Norton take any infection, although it is said that he cleaned their since just before the problem started? If so, you know the names of these infections?
Do you know when this problem started? Try a system restore to a point in time BEFORE the problem started. Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. Don't forget to check the box to show more than 5 days of restore points. If the first attempt fails, then try an earlier point or two. NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates. It's been a while so I'm not sure that you have a fairly old restore point but it is possible - hopefully.
Are these files and folders in your user profile? If Yes, your user profile may become corrupted (in fact, if can still be corrupted if the folders are not there). To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile. If that is the only available Administrator Profile (you need to be an administrator to fix this), enable the Hidden Administrator Account (HAA) using http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windows.vista.administration_accounts_passwords&p=1&tid=d20f9db4-7b2c-48be-a087-7835dc2a9055&mid=d20f9db4-7b2c-48be-a087-7835dc2a9055. If you don't remember the password, try nothing because that's probably what you (or seller) did during the installation. Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account). Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.
We will check some of your system files and hard drive for ccorruption that may be the cause:
Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.
Type sfc/scannow, go and let it run. It will scan and try to correct some of your system files. If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228. Try to put all the corrupt files here so that we can see if they can be repaired with good copies of the installation disc (unless there are too many).
While in the command prompt, type chkdsk /f /r and enter and let it run. She might want to plan itself to start at the next startup. Okay, then restart so that the program can run. It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.
Please checkwith the manufacturer to find out if there is a mouse driver updated (software or firmware) available for your make and model of mouse and your version of Vista. Download and install to update the driver to the most recent available and see if that solves the drag and drop problem (even though I know that this will not affect the question of the name change). Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.
If it doesn't (or if SFC detects corruption it cannot repair), we you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone). Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html. Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. You can have a lot of updates to re - install (including all you need to remove service packs). If the version of the system came with SP1 or SP2 preinstalled and the disc is an earlier version, then you will need to make a record of slipstream as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Search programs and files do not work!
When I go to START, and search programs and files, that nothing happens if I use the "Microsoft" fourletter Word very often ;-)
Try the profile for diagnosis of integrated research. http://support.Microsoft.com/mats/windows_search/en-us
-
When I try to look for things in windows 7 slot search files and program it does not display anything
Help
Hi girls NMS.
Try to run the next Fixit:
-
Migrated from DPM2010 to DPM2012 and reporting does not work
Original title: due tapes dpm powershell online
Hello
Can someone please? I migrated from DPM2010 to DPM2012 and reporting does not work. The mmc console crashes.
I intend to remove DPM and re - install, but in the meantime, I was wondering if anyone knows how to use Powershell to know which bands are due online and also the most Due strips to go?
I searched through Google on all day, but found nothing so thought I would ask here.
Thank you very much
Willie
Hello
It would be better if you reposted the question to the Forum 2012 DPM. Professionals will help you resolve the problem you are experiencing.
-
Startup and display does not work well.
When I start Windows XP it takes about 4 minutes to the icons appears. They appear of normal size and the screen turns white and the size of the icons and programs and the internet are extra-large. I go into display properties and reconfigure and find his game on 8-bit! After configuration back to normal display and restart or turn on again the same thing happens!
Also, I tried to do a system restore and it does not work either. Please advise me on what to do. Thank you!
Hi RhondaHeaven,
I suspect that your display card drivers are corrupted. You have your cd/dvd drivers? If this is not the case, download your display drivers (you will get the model and make from Device Manager - click on start-> settings-> Control Panel-> system-> hardware-> device-> display adapter Manager).
Click Start-> settings-> Control Panel-> system-> hardware-> Device Manager-> right click on your display-> Uninstall adapter.
Uninstall display drivers Intel of add/remove programs.
Restart your computer. Reinstall the drivers from the cd or downloaded driver.
I hope this helps.
-
Clink Manager. script/util/common js by default Java files are not included
Clink Manager. script/util/common js by default Java files are not included. I got this when I tried to send pictures to Walgreens.
What it means
Hello
1. what browser you use to upload photos?
2. If you use Internet Explorer (IE), then what version?
3. What is the format of the files you are trying to download?If you use Internet Explorer, then try to reset IE and check if it helps.
Refer to this article for help:
http://support.Microsoft.com/kb/923737Note: the Internet Explorer the reset parameter would delete all browsing history, saved passwords and forms on your computer.
Please provide us with some information so that we can help you solve the problem.
Kind regards
Afzal Taher - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Computer is very slow and IE does not work all the time.
I bought a computer from my old employeer. He is doing all sorts of things, or should I say not to do all sorts of things. It is very slow and IE does not work all the time. They have questions arise and ask if the administrator oks things and other things like that. It came with any disks. I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it. Can someone please?
Hello
Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
the former employer to do it for you if necessary.Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
role in this issue. And even the TCP/IP stack might need to be refreshed.What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).If no joy there's something blocking perhaps.
Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?
IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK
IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK
Close and restart IE or IE with no addons
not better?
IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
"(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
are bad, but some can cause your question (toolbars are BHO).
http://securityxploded.com/bhoremover.phpStartup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAlso get Malwarebytes - free - use as scanner only.
--------------------------------
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html--------------------
Departure - in the search box, type-> order
at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN
Type the following commands (or copy and paste one at a time), each followed by pressing on enter.
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
RESET
That resets your TCP/IP stack
--------------------------------
Maybe need of these:
For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
Lenovo 3000 N 500 sound card and Modem do not work in Windows XP
Hello
I buy Lenove 3000 N500 a few days back from local sellers in PAKISTAN. It has built in Windows Vista.
I change its Windows XP operating system, now my sound card and modem does not work, there is only PCI device in device manage with yellow sign, but in the Control Panel, there is no modem or sound card.
I gave the two conextant Audio and Modem drivers against the PCI device but system says that there is no such device for these drivers.
and when I run Setup conextant Audio and software of the Modem, it is said that there no such device FRO these drivers
Please advice what to do to make it functional.
Thank you
Sani
If you use the version pre - SP3 of XP, you must install KB888111. It's the UAA bus driver. After you install this hotfix, install the audio driver and modem driver.
Enjoy.
-
got photoshop elements 12 of qvc and its does not work (says it's a pirated software)
got photoshop elements 12 of qvc and its does not work (says it's a pirated software)
If not installed, install Adobe Application Manager and then try to install again.
http://download.adobe.com/pub/Adobe/creativesuite/CC/Win/ApplicationManager9.0_all.exe
Always the same?
Try to install using the download configuration file:
https://helpx.Adobe.com/Photoshop-elements/KB/Photoshop-elements-downloads.html
Reference:
Warning: "Adobe software real failure of Validation...". » | Windows
-
Click and drag does not work.
It kills me.
I can't click and drag anything. No selection tools. No net.
I tried the magic keys to reset the settings of the interface, and it does not work. I'm good at Googling, and I couldn't find anything. Any ideas?
Thank you
g.
Nope! I have homework due, so I went on a crazy uninstall spree. I uninstalled Gmote, Spotify, Macrokey Manager (whatever the hell that is) and a Ubuntu Wubi installation. The latter was probably unnecessary - my money is the Gmote or MacroKey Manager.
Whatever it is, it works now. Didn't even have to restart Photoshop.
g.
-
Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?
The SIM card is not support indicates that the iPhone is locked to the American carrier that it has been activated with. In order to obtain the released lock it is necessary that you talk to the carrier to find out what their requirements are to release the lock. They are the only ones who unlock it so that it can be used with another carrier.
-
If I pay for an application and it does not work I would get my money back guarantee, please, thank you
This is a user to user forum. You don't talk to Apple.
You can report a problem with applications to http://reportaproblem.apple.com and request a refund as well.
-
I bought the iTouch two at a time, one for my wife and one for me. In the application 'Notes' my wife shows the symbol "+" to the formatting and mine does not work. Any suggestion.
Could you please include screenshots of the so-called issue?
-
I just recently upgraded to OS El Capitan. Now, none of my movies to quicktime does not work. I have the old version of Quick time 7 and it does not work either. They do not convert. Help?
VLC will play them?
Maybe you are looking for
-
In the labview example, it have only a type siganl acquire vi. I don't know how to acquire signals of type used in a single task. I'll use the same rate of sampleing. The attachment can not acquire two signals at the same time. I just use a "Table
-
Words clump together even when you use the space bar
It's happened suddenly, so I guess that I hit a key or changed something in a menu somewhere I got updates recently, but they don't usually cause something like this. From time to time it may work, but I usually hit the space bar a couple of times. O
-
My Acer V3-4729-32RJ kind of resets?
I need help. I turned on my laptop today and this message appeared near the clock. I don't know why it appeared. I always shut down my computer the right way (go to the start menu and click close). Now all my files are still there, but my Start menu
-
When I send a print job to my laptop with Windows 7 for my printer Lexmark 2600 connected to my PC Windows XP spool of printer appears on the screen accepts the print job, and then deletes it without printing. The printer works fine when plugged dire
-
I have the genuine certificate of authenticity with the product key for windows xp home edition, but I don't have an operating system installation disk. y at - there I way I can get from microsoft? or a download? My manufacturer could not provide one