Missing built-in Ethernet

Similar Questions

• Portege R100 - missing some drivers Ethernet Controller Win XP

  The hard drive failed on my Portege R100, so I replaced and installed Windows XP.
  The only problem is that I'm missing some drivers, so I can't get into the Internet - significantly Device Manager indicates problems with the Ethernet controller.

  Is there a place to get these missing drivers? I don't even know what to look for to resolve part Ethernet controller.

  Any help would be greatly appreciated.

  Thank you-

  George

  Hello

  Ethernet controller can be a LAN or WLan card.
  Have you installed the network card driver?

  All the drivers are located on the European driver Toshiba page:
  http://EU.computers.Toshiba-Europe.com

  Protected R100 is an older model mobile phone, so you will need to check the Archive.
  In product type to download the form, choose Archive instead of the laptop.

  See you soon

• HP Compaq nc6120: Missing jan 2016 Ethernet controller

  
  

  Hello:

  Welcome to the Forum from HP Support.  It's nice to meet you too!

  HP is having problems major with pages support business for notebooks and desktop computers (the ones made around 2010 or earlier).  A lot of drivers is missing.  HP is aware of the problem, but there is no time limit for a fix.

  That's why you can't find the driver for the controller ethernet Broadcom on the support page.

  Try this one and see if it works...

  Name of the file:

• Satellite Pro A-60: built in ethernet?

  Can someone tell me if my A - 60 Satellite Pro with a Ethernet card. I'm trying to connect to a router, but the laptop does not connect to it.

  Hello

  Did you mean a Wireless LAN or Ethernet LAN card?
  As far as I know this device has an Ethernet lan port and the standard Wi - Fi: 802. 11 b / g is optional.
  In this case, you can move the laptop with WiFi card.

  Good bye

• Unplugged - Ethernet cable disconnected

  Hello

  I have the new Mac Mini (end of 2014) running OS X El Capitan 10.11.3 version.

  I was able to connect to the internet properly using the wired connection. However, after the last reboot I did, I can connect is more and where to open system-> network preferences I see Ethernet connected not-> cable disconnected.

  The problem is that the cable is connected, and the network is working properly for other devices. I tried to use another network cable and switch to another port in the router, but does not (the same ports and same cables work well for other devices).

  The WiFi worked very well.

  Any thoughts on how to fix this annoying problem?

  Thanks in advance

  Missing built-in Ethernet

• Ethernet interface disappeared

  As I rebooted my laptop this morning, I didn't more wired Ethernet network. I have not installed updates yesterday, but yesterday it worked correctly. It is not a problem with the router or the cable, because it works correctly with the other laptop. The router detects when I connect the cable (the port lights) but the router has no ARP entry for the connection (only for wifi that I need to write this question). In addition, it still works the WiFi.

  Restarting the laptop does not help. I opened 'Network Preferences' and I removed the Ethernet network in order to recreate, but surprisingly, the 'Ethernet' interface does not appear in the list more (it is available WiFi, Firewire, Thunderbolt 1, Thunderbolt and Bluetooth PAN bridge). With the Network Diagnostics didn't help either. I also tried to test the equipment with the Apple Diagnostics (by pressing D when starting the laptop), but I did not need to start the diagnostics.

  It seems that the ethernet driver has been uninstalled or misconfigured.

  I have a Mac Book Pro (2011) with OSX El Capitan.

  Any advice on what to do?

  Thanks in advance

  You can take a look at the thread below.  Mac model is different, but could be the same cause as your punishment.

  Missing built-in Ethernet

• Satellite P100 - missing controller Ethernet

  I was wondering if someone can help me. My laptop Satellite P100 (PSPA3C SD300E) is missing from its ethernet controller and I have problems installing. I downloaded the Chip Set Utility and running, but when I run Intel's LAN on Toshiba support that he ask me if I want to delete the drivers all Intel Pro network connections wired. There is only a single .exe file which is PROUnstl.exe.

  According to me, Miss me something here. Sorry this may be very simple to solve.

  I hope someone is able to help.

  Thank you

  If the network adapter is not installed properly it will be displayed in the device as unknown device manager. Please download driver LAN from the Toshiba download page and extract it to a new folder on the desktop.

  In Device Manager enter the properties of this unknown device and select the option to install the driver. Follow the on-screen menu and navigate to this folder.
  The driver will be installed correctly. Just follow the menu on the screen.

  Good bye

• Ethernet connection not found

  I have an iMac (retina 5K, 27 inches, end of 2014).

  After the start, today, I had no Internet connection. Network preferences showed not connected Ethernet port (it was). I also have the same cable to my MacBook and it worked perfectly.

  Network Diagnostics didn't help: it simply says that the computer does not seem to be connected to Ethernet, etc., and ND couldn't do anything.

  I have reset the SMC and the PRAM, nothing.

  I removed the network Ethernet interface in the network preferences... and he couldn't add. The option is not simply there:

  

  According to this post is not enough spot - we , I deleted

  /Library/preferences/SystemConfiguration/NetworkInterfaces.plist

  and

  (/ Library/Preferences/SystemConfiguration/preferences.plist)

  and restarted. Nothing.

  I tried ifconfig in a Terminal and got this:

  ifconfig

  lo0: flags = 8049 < LOOPBACK, RUNNING, UP, MULTICAST > mtu 16384

  options = 3 < RXCSUM, TXCSUM >

  inet6: 1 prefixlen 128

  INET 127.0.0.1 netmask 0xff000000

  inet6 fe80::1% lo0 prefixlen 64 scopeid 0x1

  ND6 options = 1 < PERFORMNUD >

  gif0: flags = 8010 < POINTOPOINT, MULTICAST > mtu 1280

  stf0: flags = 0 <>mtu 1280

  EN1: flags = 8863 < UP, BROADCAST, SMART, RUNNING, SIMPLEX, MULTICAST > mtu 1500

  ether b8:09:8 has: ba:a4: ff

  inet6 fe80::ba09:8aff:feba:a4ff % en1 prefixlen 64 scopeid 0x4

  INET 192.168.1.15 netmask 0xffffff00 broadcast 192.168.1.255

  ND6 options = 1 < PERFORMNUD >

  Media: AutoSelect

  status: Active

  EN2: flags = 963 < UP, BROADCAST, SMART, RUNNING, PROMISC, SIMPLEX > mtu 1500

  options = 60 < TSO4, TSO6 >

  ether 0: 00:00:75: ff: 50

  Media: AutoSelect < full duplex >

  status: inactive

  EN3: flags = 963 < UP, BROADCAST, SMART, RUNNING, PROMISC, SIMPLEX > mtu 1500

  options = 60 < TSO4, TSO6 >

  ether 0: 00:00:75: ff: 51

  Media: AutoSelect < full duplex >

  status: inactive

  fw0: flags = 8863 < UP, BROADCAST, SMART, RUNNING, SIMPLEX, MULTICAST > mtu 4078

  LLADDR 00:0 a: 27:02:00:61:b8:1 d

  ND6 options = 1 < PERFORMNUD >

  Media: AutoSelect < full duplex >

  status: inactive

  P2P0: flags = 8843 < SQUARE, RELEASE, running, SIMPLEX, MULTICAST > mtu 2304

  ether 0: 09:8's: ba:a4: ff

  Media: AutoSelect

  status: inactive

  awdl0: flags = 8943 < UP BROADCAST RUNNING PROMISC, SIMPLEX >, MULTICAST mtu 1484

  ether da: cc:a3:a3:90:8 d

  inet6 fe80::d8cc:a3ff:fea3:908 %d awdl0 prefixlen 64 scopeid 0x9

  ND6 options = 1 < PERFORMNUD >

  Media: AutoSelect

  status: Active

  bridge0: flags = 8863 < UP, BROADCAST, SMART, RUNNING, SIMPLEX, MULTICAST > mtu 1500

  options = 63 < TXCSUM, TSO4, RXCSUM, TSO6 >

  ether ba: 09: 8A: ab:b5:00

  Configuration:

  0:0:0:0:0:0 priority 0 0 fwddelay hellotime ID 0

  maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200

  port root id 0:0:0:0:0:0 priority 0 ifcost 0 0

  IPFilter disabled flags 0 x 2

  Member: en2 flags = 3 < LEARNING, DISCOVER >

  path of priority 0 ifmaxaddr 0 5 0 cost port

  Member: en3 flags = 3 < LEARNING, DISCOVER >

  ifmaxaddr 6 priority path cost 0 0 0 port

  ND6 options = 1 < PERFORMNUD >

  Media: < type unknown >

  status: inactive

  Any thoughts?

  If you use 10.11.x:

  Try this:

  Start the computer in Safe Mode, and then restart normally. It will be slower than a normal startup.

  MacIntel: Reset of the controller (SMC) system management

  Reset the PRAM and NVRAM on your Mac.

  Repair the hard drive and permissions - El Capitan

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Now, download and reinstall OS X El Capitan 10.11.3 Combo Update.

  If the problem persists then discovered this: Re-built-in ethernet disappeared.

• Mac Pro does not recognize the Ethernet ports

  After a reboot for my end of 2013 Mac Pro OS x 10.11.3, the two Ethernet ports are most recognized. Suffice to say not 'connected' is one of them.

  I have:

  • rebooted a couple of times
  • Reset the PRAM
  • the power disconnected for several minutes left
  • tried two different terminals
  • tried two different Ethernet cables
  • tried the two Ethernet ports

  The light of the end device will blink.

  WiFi works fine.

  What should I do before I decide that there is a hardware problem?

  Bob

  There was a recent post about the same problem and found a solution. Give it a try: Re-built-in ethernet disappeared.

• ThinkPad 13 - OSD - no boot pxe with ethernet dongle?

  We have just received a new kind of model in our catalog and I know it is not built-in ethernet port, so we use a usb dongle ethernet. On the machine, it has 3 x USB 3.0 ports. I put the Intel USB 3.0 driver 10.0.10.255 (eXtensible Host controller) and boot on the usb startup key. After WinPE is run the dongle (usb) ethernet must receive an ip address which it won't.

  The BIOS setting boot only passes of UEFI/Legacy to "legacy".

  My dongle ethernet (4X90E51405) is installed as-> "Thinkpad USB 3.0 adapter Ethernet" (RTL8153.ndi, USB\VID_17EF & PID_7205 & REV_3000)

  I removed the usb 3.0 extensible... driver starting the system of image because it doesn't do anything. It is only the driver for the ethernet dongle that solved my case-> https://support.lenovo.com/be/en/documents/pd029741

  Change the boot method 'only legacy' wasn't the answer either so I changed all the default values.

• PCI device and SM Bus, MISSING controller and impossible to INSTALL - HP Pavilion g4 1264ca

  I had recently done a clean install on my laptop and when I rebooted, it was missing the drivers for the PCI device and SM BUS controller. When I go to Device Manager and try to reinstall or search the hardware changes, my computer is unable to install. Also, I was missing my network Ethernet and wireless drivers, but I installed the appropriate via the HP website drivers. However, still miss me these two pilots. I tried to install on my laptop, but just AMD chipset, which creates more problems because once the program asks me to restart the computer it remains stuck to the Windows loading screen (rotation around the Windows logo colors). If someone could find the right drivers for me download or ways to diagnosis this problem, any help will be greatly appreciated.

  Laptop model: HP Pavilion g4 1264ca

  Hello:

  You should definitely the amd chipset drivers to install the smbus controller.

  Here's what I've done for you...

  I have zipped and attached just the driver files raw you must install manually only under attachments below smbus controller.  As you saw that the chipset driver file contains a lot of other things as well.

  Unzip the files in a folder.

  Go to Device Manager and click the controller smbus needing drivers.  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software method and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.   Then restart.

  The PCI device is the card reader that needs a driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103100-1&cc=us&DLC=en&LC=en&OS=4063&product=5186397&sw_lang=

• Missing my Internet license

  Hi I have a problem with my hp Pavilion. I used recently reinstalled vista inside but now miss me my ethernet controller and sm bus controller and I'm having a problem find these drivers. Another problem I can not use the hp update because I don't have internet on the computer. I can also use the hp Recovery Manager because my computer is not in it, my computer model is a6603w.

  Here is your card motherboard page:

  http://support.HP.com/us-en/document/c01357119

  Install Nvidia Chipset (included ethernet) from the Nvidia site.

  NVIDIA 630i for Vista 32 bit:

  http://www.nvidia.com/object/nforce_vista_win7_32bit_15.49.html

  Realtek HD Audio_Choose High Definition Audio Codecs, contract, then download the file "Executable":

  http://www.Realtek.com.tw/downloads/

• LaserJet M3035: Missing home LJ M3035 tab

  I need to switch to admin mode to enter the new IP address for the new direct jet but Home tab does not appear on the display. Can someone tell me how to access this screen? I think it's in a certain type of security mode? I tried a cold reboot, but it did not work.

  This machine has a built in ethernet port also but it looked bad so I installed a Jetdirect. I have to disable the original ethernet port? Or printer will recognize where the network cable is plugged?

  Thanks in advance for the help

  Thanks SHThomson

  Great idea! I didn't know that the Jetdirect would hold the network settings, if it is removed from a machine.  If I understand you correctly, I can set up a Jetdirect on a LJ4250 then put the jetdirect M3035 customers?  I guess that this will allow me to get on the web interface page and change the settings of the screen to display the menu tab, etc.

  Thanks again

• Missing drivers after recovery

  Dear HP,

  I just had the unfortunate experience of having to re - install Windows 7, but not through the recovery option, because it did not work.

  It seems my PC works with the exception of some drivers, including ethernet drivers. Without internet, it is very difficult to get the updates and other drivers. I am currently working for my wife's PC in the hope of resolving the problem quickly.

  Data sheet:

  HP Pavilion - Windows 7

  Missing drivers

  Ethernet controller
  Hardware ID
  PCI\VEN_10EC & DEV_8168 & SUBSYS_2ABF103C & REV_06
  PCI\VEN_10EC & DEV_8168 & SUBSYS_2ABF103C
  PCI\VEN_10EC & DEV_8168 & CC_020000
  PCI\VEN_10EC & DEV_8168 & CC_0200

  PCI Simple Communications controller
  Hardware ID
  PCI\VEN_8086 & DEV_1C3A & SUBSYS_2ABF103C & REV_04
  PCI\VEN_8086 & DEV_1C3A & SUBSYS_2ABF103C
  PCI\VEN_8086 & DEV_1C3A & CC_078000
  PCI\VEN_8086 & DEV_1C3A & CC_0780

  SMBus Controller
  Hardware ID
  PCI\VEN_8086 & DEV_1C22 & SUBSYS_2ABF103C & REV_05
  PCI\VEN_8086 & DEV_1C22 & SUBSYS_2ABF103C
  PCI\VEN_8086 & DEV_1C22 & CC_0C0500
  PCI\VEN_8086 & DEV_1C22 & CC_0C05

  Many thanks in advance,

  Rob

  You can find your driver page using the link at the top of this page entitled "Support and drivers". Enter your PC model number to find the correct page.

• Missing Driver Pavilion dv2-1007ax

  Hello

  I have downgrade my pavilion dv2-1007ax from vista to XP. But there are some missing driver:

  -Ethernet controller

  -HP Integrated Module

  -SM Bus controller

  -BCM5701 Gigabit Ethernet

  How can I update the driver? Please help me.

  Thank you.

  Message edited by rubenmnk on 06/15/2009 19:29

  dv2-1007ax support page can be found here

  Assuming you have managed to install XP, here are the required drivers.

  1.Realtek RTL8102E Family PCI - E Fast Ethernet NIC, here

  2 HP Integrated Module (Bluetooth), here

  3 controller Bus SM Chipset AMD, download South Bridge Driver individually, here

  4 BCM5701 Gigabit Ethernet--> do not know, are sure about this?

  try the Broadcom Wireless, here

  Good luck