missing in xp aspi layers

Similar Questions

• AFC.sys missing (Arcsoft (R) ASPI Shell (program CD/DVD)

  Hello!

  So basically, I managed to delete afc.sys on my computer. After that, I couldn't run any CD/DVD on my computer. Of course, I heard the CD turns but it has never launched a program.
  After that, I've also disabled and uninstalled my everything device CD/DVD. Then I restarted my computer, not found CD/DVD drivers but could not download them.

  Any solution to find out how can I find a download for an afc.sys or a driver for (Arcsoft (R) ASPI Shell (CD/DVD program)?

  Thank you!

  Kind regards
  Gustav

  I consider that the good news such as the removal of the entry of the Afc should solve the problem with the CD/DVD device.

  To remove the Afc entry double-click LowerFilters and, under value data, delete Afc > OK

  Create a system restore point beforehand and restart the computer after.

  I don't know why you deleted the afc.sys but the value of the Afc in the registry trying to load the afc.sys driver that no longer exists and therefore the error with the CD/DVD device.

  Delete the value of the Afc in the registry should solve the problem.

• Missing icons in the layers of PS Panel (lower-right)

  Can someone help? I scoured the FAQ and on the internet, but pulled to a white. I lost my new layer and other icons at the bottom right of the screen - see screen capture below. I can get them back by resetting the screen display, but then I lose the 'open files that are' at the top of the screen - ideas? Thank you, Derek

  

  Have you tried to maximize the window of Photoshop?

  Green light on Mac

  

  The middle button on Windows

  

• Missing layers on iPad with CV

  Hi all

  I am new to the DPS and the really right out functions with InDesign CC of test to get a better understanding of its capabilities.

  I created 4 super simple documents - nothing else than a few vector shapes, text elements and buttons to navigate between the pages.

  Everything seems beautiful and logical and test it in my office preview looks like 100% - but what is strange, is that preview that I receive on my iPad via the content viewer is missing a number of layers of shapes, buttons and text elements - still some elements of the interface layer bottome still appear.

  I see that by saving a little update on a page, it download to the cloud and the CV saves a new version to download the device, but each time content does not appear in the preview of the iPad.

  I hope I'm just something simple here - may be missing that I didn't update my iPad to iOS7-I don't know.

  Would appreciate any assistance, this looks like a great publishing tool but if she can make a couple of circles and text fields, then I don't really get the point.

  Thank you

  OK, so it seems I can have just thought of it...

  It turns out that the automatic download occurs only when you first add the item to your folio and not every time that you save the document - you must always select and select update in the Folio Builder contect menu.

  I thought that everything was constantly updated to the cloud so he picked up other changes each time.

• Stamp/Merge Visible missed a few layers?

  Hi, I use Photoshop CS5.

  When I patch/merge visible, it does not seem to happen which was the last time the my screen. It seems he missed a few adjustment layers, which I'm not sure that one. Are there other ways to deal with this problem?

  Thank you.

  Chances are that you see a difference between the speed optimized integer-estimated preview of your layer to a reduced resolution styles and the reality of their appearance at 100%.

  I bet that if you were to be looking at the image at 100% zoom and make the patch / merge visible layers, you won't see a difference.

  -Christmas

• Illustrator keep the sizes of layers

  Illustartor 2014.1.1 version, version 18.1.1 (64-bit)

  After the liberation of 2014.2 effects, version 13.2.0.49

  I created an illustrator work 18.0 with 18 layers, and imported into the new model AE as Composition - keep the sizes of layer.

  My first problem was imported for only 15 layers, but I realized that somehow the file would come back a couple of stops of the same file name. With the import of layers 15, my layers appeared in their correct position when placed in the layout, but missed me the 3 layers.

  After I guessed by saving the file in Illustrator on a new file name and import it, I could get all 18 layers - but all my anchor of layers to the center of the model and do not align their correct position.

  How can I get all the 18 layers to align their proper positions as they appear in Illustrator in my AE Comp?

  The answer I found that create a similar thread in After Effects. That's after Effects were originally, I had to post this thread, but with my subject be Illustrator, my son went through during the community selection to post and another mistake on my part.

  The answer is that my project took 7 work plans. Why? I was working on a work plan, I had a work plan of thinking, thinking that I was changing the size of the artboard, but actually make new work plans.

  I deleted the work plans are not used 6 and finished with the plank a chart where I got my Illustrator layers, imported into After Effects and everything works as supposed.

  The path that I was creating to try to solve my error is confusing, but the answer is simple.

  Answer given above and also even in this thread of After Effects Illustrator visible layers only an image

• Panels of layers is absent

  I just upgraded to PSE 12 of 10 and I noticed that there is a missing space where the layers of panels are supposed to reside. According to other layouts I saw on YouTube the layers panel under the words to create and share. As far as I can tell nothing else is irrelevant. My question is this, is there something I need to say PES 12 inorder to get the layers panels on the workspace?

  Mudhog3776

  You are in Expert Mode? It is the equivalent of the old Edit complete.

• I update my 2014 Photoshop Photoshop 2015 CC CC and not all scripts are

  I'm updating Photoshop 2015 CC and not all default scripts are loading missing scripts, I use layers in all my projects and it doesn't download (and more).
  I use the Browse button congratulate to run the script, but it is very uncomfortable to do whenever I need. The funny thing is that load my custom Web scripts.

  
  Someone has an idea how solve it?

  I know it's the new update, but there are a lot of bugs that I read and the bugs I staff meeting.
  I hope that Adobe will soon release an update to the fixed a bug because Photoshop 2014 cc worked for me as if by magic.

  Eli.

  Have you looked under file > export in photoshop cc 2015?

  

• Reconnect a renamed PSD

  I imported a PSD layered like a model. The related DSP has been renamed. After effects said he finds not all layers.

  If the PSD was the same, but moved to a different directory, AE would be auto-trouvez all others missing layers once I re-paired a layer successfully.

  However, if I change the name of the PSD, AE gets all mute. I reconnect a layer, but it is not smart enough to update the rest of the missing layers. (Though even the structure of the PSD has not changed a bit). I have to connect each layer flippin '.

  Is there a better way around this - in which case I can rename a PSD without having to recreate a link to each layer? (which can be hundreds!)

  Just double-click the file in the project Panel, and AE will be

  asking you to locate the missing file. All layers must reconnect

  automatically. New PSD layers that were not imported to the original will be

  not be imported, however, you must only manually.

• Disabling error messages?

  I use photoshop CS5 Extended version 12.1 x 64 to work designing banners. The process involves me using pre-existing photoshop templates that are used over and over again. These models have been created God knows when and as such there are diapers with missing fonts, but they are hidden and unimportant for my task. Everytime I open the models that I get an error message missing fonts, which reads:

  "Some text layers contain missing fonts. These layers must have replaced missing fonts before they can be used for vector output. »

  

  I am aware of that, and I'd rather not be reminded everytime I open a model, having to confirm that I understand the question, especially when I open 10-20 models at the same time. So my question is, is it possible to set parameters so that this error message stops appearing. I will note thate e also use a customer of universal Type for fonts, which replaces the need for photoshop fonts.

  If I can find a way to disable this error message, it would certainly speed up the process of opening files.

  Thank you!

  Dim

  There is no way to delete a specific error message if there is no [] do not show checkbox, so the best is maybe to get copies of missing fonts...

  -Christmas

• Missing elements only on certain layers, only on certain pages, Ghost - CS6 INDD

  Items on certain layers, only on certain pages, disappeared while I was working on other pages in the document.

  • The layers Panel expands to show that there are several elements on the page, but elements (text boxes and a chart area) does not visibly show up on the page. Yes, I have reviewed the "layer options" - this isn't the problem
  • I'm not able to choose them, even when the file is a visible layers. Yes, shows the symbol of the eye. These issues all come while each layer is 'on' - so it's not the problem.
  • Only 2 of the 14 layers are made... and just over 10 pages (about 308), although not all the elements on these 2 layers disappeared on these 10 pages, there are a few anomalies that has not disappeared
    
  • If I stick a new element in another layer, while the box is checked I can move in my "layer of problem" and the form will visibly disappear (although always register as something existing in the layers panel). As long as I do not deselect, I can move it to another layer using the layers panel, and he re - appears. If I deselect the, I can not select the question again using the selection tool or layers panel again, but it still shows that the element exists in the layers panel. I have not found a way to deal with these elements 'Phantom' again. S.O.S.!

  I've never seen this problem before. At 3 other designers see it to confirm that I wasn't crazy. They never saw coming forward either.

  Working on a project to design complex book... I mean here on 2200K + links images, 308 pages, 40 + master pages and 14 active layers.

  Would love to no explanation for this software error.

  I wish l could explain it's "human error" but I have not worked on these affected pages today. I noticed missing items when I went to review the chapter. I worked in the file all day today... and it is very disturbing: I printed these performed 10 pages late yesterday afternoon. I went to retrieve this file in time Machiene, but my backup file also had the same problem of 'ghost elements' (even if it backed up once I have printed, and the impressions were very good). I had to go all the way back to file on Monday, which was pre-re-design of these pages.

  I use InDesign for 8 years and have never encountered a problem like this before. I hope that someone out there!

  -Bree

  Is there any other object in front of him, maybe - a large empty frame filled with perhaps paper? If this isn't the case, I would say that there is probably some kind of file corruption and I save a copy in the current state as backup, and then export to .idml to see if you can clean it. See remove minor corruption by exporting

  You should probably also do a Select All on the page and see if you see single-point stray objects or other objects that you do not (at the time on the screen of the page or in the layers panel). I saw maybe three cases in 8 or 9 years of single point objects with a fill assigned which caused all sorts of behavior strnge. I never managed to create on these intentionally, however.

• CS6 partially missing layered images

  Hello world

  How to restore the partially missing images?

  Detail: I have a photoshop file containing 15 layers with completely different pictures on each. Then, all the pictures partially disappeared except for the background image. The long vertical piece of the image on the right side is part of a layer that is not background image.

  I unchecked 'use graphic Prosessor' (Preferences > General > Performance) to see if it's graphics card problem but it does not solve the problem.

  Help, please!

  

  You have selected more than one layer?

  Edit: The layer is locked?

• InDesign CC - square window missing layer "indicates selected items" (drag to move between the layers)

  Any body knows how to get the square in layers of window Panel to drag and drop items between layers?

  In indesign CS6 it works always, CC he disappeared suddenly...
  

  See screenshot of what I'm talking...

  If it works in one account, but not another, delete two preferences of the account files which ha a problem and copy them from the account that works. If it fails again in no time you have a software conflict with another program that you run in this account.

• InDesign CC 2015 - missing indicator layers

  Hello

  I have just opened an Indesign file in the latest version of Adobe InDesign and for some reason, on my layers panel have lost the indicator bit layer square on the right (see below)

  It's really frustrating me, I don't know it's just a setting somewhere, but I can't find it.

  Any help will be greatly appreciated, so thanks in advance.

  Kind regards

  Adam

  

  Need to restore your InDesign preferences.

  Garbage, replace, reset or restore the application's preferences

• Parts of layers fragmented, abandoned or missing... help!

  Hi-

  Please take a look at the attached screenshot - my buttons are all out of whack in the corners and are cut. The layers are in the right order, nothing is blocking these elements. The file was beautiful from the last, then today is how he opened... When I select the corners of the right key, I can edit, but the white pieces stay (as if the blue is to skip this section on stairs).

  Does anyone have an idea what is the cause?

  H * E * L * P

  

  ok... it is a problem of mask... got a pickaxe panicked for a minute...