Similar Questions

• MrtRate non Plug - and - Play driver displays the error message "this device is not working properly, or does not have all its drivers installed (Code 24)."

  Convenience store recommended remove and reinstall to resolve problems.  Cannot locate the driver using the Add Hardware Wizard to reinstall by troubleshooting tips.

  Do I need this driver for my Dell PC under Windows XP Home Edition SP 3 or if I can't ignore the deletion?

  If I need to reinstall the driver of mrtRate, where I can get it?

  Ganeles Hello death,

  Thank you for your message.  After studying this problem, it seems that it is caused by the Quicken software.  Click HERE and run through the troubleshooting process.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How can I reinstall the non-plug-and-play drivers that I have uninstalled mistakeningly?

  I have a Dell Inspiron and recently started having random blue screens, close down and the inability to get out of hibernation with her. I ran Microsoft Security databases, and he is found to have viruses Alureon.A, whom he said he eliminated, but when running - it again, it was in Quarentine. Tried to get into SafeMode w / networking to remove and it quarentined again. Return to normal and it works, it shows up again!
  I did some research on Google and found another way to remove it by devmgmt.msc and could not find the file that it supposed to delete. A next post had a list of non-plug-and-play drivers, and I misread this post and uninstalled the files he had. Reading - it a second time, they were not the drivers to uninstall! So now I uninstalled the drivers, that I should not have, and I'm afraid to turn it back on. What should I do? Is there anyway I can get these drivers or is it easier to reinstall Windows Vista all together and fix the drivers and get rid of the virus?

  I was also unable to update Windows with this virus, with MSE.

  Accidentally uninstalled files were:
  A sound signal
  HTTP
  NDIS system driver
  NDProxy
  Null value
  RDPCDD
  Remote Access Auto Connection Driver
  VgaSave

  First of all, I recommend you download and run the program below.  It's the only one I found that systematically identifies and removes infections Alureon.

  How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)?

  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  So, I see two possibilities. Sfc/scannow in an elevated command prompt might reapair missing files and is worth a try.

  If this fails, try the system restore.  It is a risk and could fail and possibly further damaging the system.  If If is running it will probably restore the infection as well.  In this case, restart TDSSKiller and other malware analysis.

  Although I always discover a wipe and reinstallaton ultimately, it may turn out to be necessary in your case.

• Problem with non-plug-and-play drivers.

  I need assistance with drivers Non-Plug and Play, Null, for a Windows 7 Professional 32-bit SP1, I find the Question, no answer to the problem. In the Device Manager, on the driver tab: status is stopped and does not start. And on the general tab: device status is: this device is not present... Bonneau, Bonneau, bla (Code 24). someone Pleazzzzzzee help me, lolol

  Hello Thomas,.

  Welcome to the Microsoft Community Forum.

  1. Which device you are trying to connect to the computer?
  2. You did no particular change in the computer?
  3. A device that has a code 24 in Device Manager?

  Code 24 indicates that the device is not present or is not working properly, or does not all its drivers installed.

  If the error code reappears, check that the device is properly connected to your computer. For example, remember that all the cables are correctly installed, or that the cards are properly housed in their locations.

  See the article: error codes in the Device Manager in Windows

  http://support.Microsoft.com/kb/310123/en-us

  Also try to update the drivers for the device.

  See the article: automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Please respond to this answer, we will be happy to help you.

  Thank you.

• Plug-and-play driver needed

  Hello

  have some problems with the plug-and-play driver - can not update, as it "works fine and any updates do not need" according to windows. But is that the plug-and-play driver problem is the reason for sound, webcam and some other functions do not work properly. Also can not find the plug & play driver among the drivers in the other. Can anyone help with this issue?

  Hello

  Sorry, but I don t know what you mean with the plug-and-play driver. What part of the hardware, you need another driver?

  In addition, it would help if you post your model correct portable operating system.

• A plug-and-play driver convert error

  Hello, I ' m trying to convert the plug-and-play driver that will be used in LabView. In one of the previous where the drivers were the same, is successful, but I have an error.

  http://forums.NI.com/T5/LabVIEW/is-there-a-similar-labVIEW-driver-to-the-one-on-NI-website-for/m-p/8...

  VXIPlug & play Driver for 4395 has: http://www.home.agilent.com/agilent/software.jspx?ckey=2249830&lc=eng&cc=LV&nid=-11143.0.00&id=22498...

  installed in accordance with the recommendations of Agilent.

  Convert by: LabVIEW 8.2 and generator of jamming of LabVIEW for LabWindows/CVI 1.1 instrument Drivers

  Error: During the conversion, everything is going well, but in the end apers Conversion report that no screws cannot be created.

  

  Is the problem in my old version of LabView or somevere else?

  Follow the link... install Agilient IO libraries

  ARRRRGH!

• Problems with the Realtek and Plug-and-Play driver

  Until recently, I noticed a red circle with an X in it by the sound on the taskbar icon. When I switch on it it says no audio device installed and when I go into the Device Manager there is a yellow triangle on my Realtek High Def Audio Driver. When I click on it I get this error:

  "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) »

  The Plug-and-Play driver also seems to give me the same exact error (Code 52) and has the yellow triangle next to him as well.

  Hi Eric,.

  This problem occurred if the driver can be signed or corrupted.

  I suggest you go to the Web to Realtek site, download and install the drivers by selecting the right device.

  Error codes in the Device Manager in Windows
  http://support.Microsoft.com/kb/310123

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Disable NDPROXY.sys in "Non-Plug and Play drivers" will be harmful to my Windows 2008 and 2003 servers?

  Since December 2010 my business about known Windows 2008 and Windows 2003 servers takeing 50 minutes or more to complete the boot process.  In general, they are sitting at the screen from Windows startup to full time.  Well, a month ago I activated the boot record and found that the NDPROXY.sys file was not loading the start-up newspaper.

  ...

  Loaded driver \SystemRoot\system32\DRIVERS\rdpbus.sys
  Loaded driver \SystemRoot\system32\drivers\swenum.sys
  Loaded driver \SystemRoot\system32\drivers\umbus.sys
  Loaded driver \SystemRoot\system32\DRIVERS\flpydisk.sys
  Loaded driver \SystemRoot\System32\Drivers\NDProxy.SYS
  Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
  Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
  Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
  Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
  Loaded driver \SystemRoot\system32\drivers\luafv.sys
  Loaded driver \SystemRoot\system32\DRIVERS\lltdio.sys
  Loaded driver \SystemRoot\system32\DRIVERS\rspndr.sys
  Did not load driver \SystemRoot\system32\DRIVERS\MpFilter.sys
  Loaded driver \SystemRoot\system32\DRIVERS\bowser.sys

  ...

  So I studied this and found that there is a patch, http://technet.microsoft.com/en-us/security/bulletin/MS10-099, systems of 2003 was published in December 2010 that touched this file.  Coincidentally, it was at the time we started long reboot problems. Windows 2008 systems were not affected by this patch, but they always NDPROXY.sys running.

  I would like to know if this file is causing this anomaly on my systems, and if so, can it be turned off?

  Hello

  Your question of Windows 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en/winserverNAP/threads

• non-Plug-and-Play monitor generic when win2012 imported from the FVO

  Hello

  I created a virtual win2012 with VMware tools instolled machine. I-ve it exported as part of a vapp, but when I import the vapp, ha win2012 a generic no/pnp monitor that I have to uninstall the OS otherwise start over completely.

  Any idea on how to prevent this issue_

  Hi friend

  Run the command "sysprep" before exporting the machine to the FVO.

  BR

• Agilent 4156 new driver plug-and-play (pulse-installation problem)

  Hello, I am new to Labview and just started using the Agilent 4156 new plug-and-play driver published on 02/12/2008. I try first to set up conditions of STRESS using this project. While I am able to configure most of the things that I need, I can't set the peak pulse value using the program "Set Pulse.vi". The Readme for the driver mentioned that this program has not been tested. The error message is the following:

  Reports of the instrument:
  + 181, "illegal installation. Invalid command. »
  -113, "undefined header."
  + 0, "no error".

  Can someone help me with this problem?

  Thank you.

  Thanks for your reply.

  I think I solved the problem. There are syntax errors in the "set up" Pulse.vi (PUL has been used instead of PULS in two places). He is now able to set the basic and advanced.

  In addition, the way is designed the vi, it will always give an error because he tries to put in tension (possible only when a VIEW is of type V) 'Source' and 'Base' / 'Peak' tensions (only possible when the PGU is a type VPULSE). I removed the parts that I didn't need.

  FYI, I use an Agilent 4156 C. In the configuration screen, the revision of the CPU is 1 and the revision of the software (03.06 HOSTC, CUMS 04.07, ADC 01.00).

• Staging Drivers for Plug-and-Play with HP RemovePNPDrivers utility

  This video describes how to download and extract the software, delete the printer driver HP staging of files using the HP RemovePNPDrivers, package and stage a driver using the HP Driver Utility (DDU) Deployment, perform a Plug-and-Play driver installation and verify that appropriate driver is installed.

  For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support.

  This video was produced by HP.

  I hope you find this information useful.

• Windows 7 does not recognize my Dell 2407WFP monitor - only as monitor not Plug-and-Play credits.

  This monitor is able to execute the resolution 1920 x 1200 and it worked well on the same laptop Dell Latitude D820 under XP Pro SP3. However, Windows 7 does not recognize the Dell Monitor (shows as non-Plug-and-Play monitor credits) and will go no higher than 1600 x 1200. The monitor on the laptop will run in 1920 x 1200 and also 1920 x 1200 poster XP running inside a virtual machine, so the problem is with Windows 7 not properly recognizing the Dell 2407WFP monitor in VGA mode. All other operating systems work very well to support the material properly.

  The laptop is running a NVidia Quadro NVS 120 M map. I tried several versions of Vista Dell drivers (do not have for Windows 7 - therefore Dell is not to follow). NVidia has no drivers for this card because it specially designed for Dell and all pilots must come from Dell (new Dell doesn't help here - I know that Windows 7 was just recently released but there are important suppliers for some time. Thought Dell was big by taking charge Microsoft with their business line of products but I think that even they cannot follow.

  It seems that the problem is also Windows 7 is not correctly identify the Dell monitor and many other monitors as well. Unfortunately, I doubt that this issue will never be resolved by Microsoft. I have yet to see that all the issues MS resolved long. I begin to see the truth in the last pub in Apple vs MS on television. Well the time to upgrade the new hardware.

  If anyone has a suggestion or a solution to solve this - I'm all ears!

  Don

  wait until that Dell publishes drivers for win 7 or you can contact them for the same thing.

• HARD drive external, Toshiba PX1395E, not plug and play in Windows XP

  Hi all

  Thanks for reading this.

  Just bought a number of HDD 2.0 USB 750 GB external PX1395E.
  I want to use to back up files from my old computer to my new computer.
  In fact, my old pc recognizes the HARD drive (plug-and-play) and I already copied the required data.

  BUT: my new computer, with Windows XP Professional, Service pack 3. Does NOT recognize the HARD drive.
  I used several (versions 1.1 and 2.0) USB ports and everything is connected to the way that it should.
  Windows tells me that I have plugged 'something', but is unable to recognize what it is and I can't use the material.

  I think I need a driver to make this work. Site Web de Toshiba does not provide this particular driver (I checked, but it cannot find).

  Is there anyone with a solution?

  Thanks in advance.

  Do you see the HARD drive in the disk management?
  Control Panel-administrative tools-online-online disk management computer management online

  Another way is that reinstall you the chipset driver. Look at the Toshiba site to download and choose the right one.

  Look for yellow exclamation marks Device Manager.

  Let me know, what you're doing.

• Why do I get a message "software you are installing has not passed Windows Logo test, such as Legacy Driver, Activity Monitor and driver plug-and-play

  WY the message about not to test the Windows Logo on these drivers as follows: Legacy Driver, Activity Monitor and no plug-and-play drivers

  Hi John,.

  Thanks for posting this question in the Microsoft Community.

  I'll certainly try and help you get the problem solved. Please provide us with some answers before proceeding.

  1. when exactly you get the error message?

  2. are you aware of any changes made to the computer before the show?

  This type of error message arises usually when the driver that you are trying to install has not passed the Windows logo test or is not approved by Microsoft.

  Here is a link with a few steps of good to help solve problems like yours. Go through the steps from 1 to 10 and check if that helps.

  Hope this helps and provide us more information if you need more assistance. We will be happy to help.

• Blue screen: Plug and Play detected an error, probably due to a bad driver?

  Get a Blue Screen of Death: Plug and Play detected an error, probably due to a bad driver?

  I'm running on Windows Vista Home Basic. I don't know what happened, but this morning when I turned on my laptop Dell Inspiron 1420, the blue screen of death appeared saying that "Plug-and-Play detected an error, probably due to a faulty driver. She also asked me to 'Disable the BIOS memory options such as caching or shadowing the' but I don't know how to do this, because it does not appear on my BIOS settings. In addition, the message suggested that I go on safe mode, but whenever I try to go on Safe Mode, the Blue Screen of Death keeps re-appearance, so I can not go on Safe Mode or the other. And one other weird thing is that when I press F8 (press the key to early startup options) I get to select an operating system to start: Microsoft Windows XP Embedded which is weird, because as I said, my OS is Windows Vista and I don't have any other OS installed in my laptop. How can I solve this problem?

  Hi,                                                      Part 1 of 3
  (There is a 4 part added)

  These methods as well as those in the next 2 posts to troubleshoot BlueScreens. You
  can also post information that you store in a message in these forums.

  You can solve this a bit on yours with these little free programs.

  1. use BlueScreenView read minidumps and note the BCCode or stop codes, the Cause and
  the time.

  2. run MyEventViewer and search the entries at the time or a second (or) more before the BCCode
  or stop the BlueScreenView Codes.

  3. look for the code on FaultWire - ago usually excellent solutions.

  0x00000000 to 0x00000003F
  http://www.faultwire.com/solutions_index/fatal_error-1.html#IssueList

  0 x 00000040 to 0x0000007F
  http://www.faultwire.com/solutions_index/fatal_error-2.html#IssueList

  0 x to 0x000000BF 00000080
  http://www.faultwire.com/solutions_index/fatal_error-3.html#IssueList

  0x000000C0 to 0x000000FF

  0x00000100 or higher
  http://www.faultwire.com/solutions_index/fatal_error-5.html#IssueList

  4. position the BCCode or stop Codes, settings, the Cause and related information in a message
  detailed in this forum for assistance.

  ---------------------------------------------------------------------------

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and
  Displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP)

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  =============================================

  Here is the example of the usefulness of BlueScreenView - it is small and automatic so very easy to use.
  With time MyEventViewer TRICK is very simple to check when the BSOD.

  Partial screenshot of BlueScreenView (first 1/2 page)

  

  ============================================
  
  Partial Screen Shot of BlueScreenView (second 1/2 page)

  

  =======================================================

  Double-click the line to dump high component file or file - properties with it highlighted.

  

  =======================================================

  Double click on the bottom panel line of file name or file - properties with it highlighted.

  

  Right-click on a line - report HTML Selected Items.

  List of crash - created using BlueScreenView

  Dump File	Crash Time	Bug Check String	Bug check code	Parameter 1	Parameter 2	Parameter 3	Parameter 4	Caused by the driver	Caused by address	Description of the file	Name of the product	Company	Version of the file	Processor	Name of the computer	Number of processors	Major version	Minor version
  041110-22218 - 01.dmp	2010-04-11 22:42:11	NTFS_FILE_SYSTEM	0 x 00000024	00000000' 001904fb	fffff880'065a7bd8	fffff880'065 has 7430	fffff800'02c7c0c4	NTFS.sys	NTFS.sys + 213d8	NT file system driver	Microsoft® Windows® operating system	Microsoft Corporation	6.0.6000.16386 (vista_rtm.061101 - 2205)	x 64		2	15	7600

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.