Disable NDPROXY.sys in "Non-Plug and Play drivers" will be harmful to my Windows 2008 and 2003 servers?

Similar Questions

• How can I reinstall the non-plug-and-play drivers that I have uninstalled mistakeningly?

  I have a Dell Inspiron and recently started having random blue screens, close down and the inability to get out of hibernation with her. I ran Microsoft Security databases, and he is found to have viruses Alureon.A, whom he said he eliminated, but when running - it again, it was in Quarentine. Tried to get into SafeMode w / networking to remove and it quarentined again. Return to normal and it works, it shows up again!
  I did some research on Google and found another way to remove it by devmgmt.msc and could not find the file that it supposed to delete. A next post had a list of non-plug-and-play drivers, and I misread this post and uninstalled the files he had. Reading - it a second time, they were not the drivers to uninstall! So now I uninstalled the drivers, that I should not have, and I'm afraid to turn it back on. What should I do? Is there anyway I can get these drivers or is it easier to reinstall Windows Vista all together and fix the drivers and get rid of the virus?

  I was also unable to update Windows with this virus, with MSE.

  Accidentally uninstalled files were:
  A sound signal
  HTTP
  NDIS system driver
  NDProxy
  Null value
  RDPCDD
  Remote Access Auto Connection Driver
  VgaSave

  First of all, I recommend you download and run the program below.  It's the only one I found that systematically identifies and removes infections Alureon.

  How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)?

  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  So, I see two possibilities. Sfc/scannow in an elevated command prompt might reapair missing files and is worth a try.

  If this fails, try the system restore.  It is a risk and could fail and possibly further damaging the system.  If If is running it will probably restore the infection as well.  In this case, restart TDSSKiller and other malware analysis.

  Although I always discover a wipe and reinstallaton ultimately, it may turn out to be necessary in your case.

• Problem with non-plug-and-play drivers.

  I need assistance with drivers Non-Plug and Play, Null, for a Windows 7 Professional 32-bit SP1, I find the Question, no answer to the problem. In the Device Manager, on the driver tab: status is stopped and does not start. And on the general tab: device status is: this device is not present... Bonneau, Bonneau, bla (Code 24). someone Pleazzzzzzee help me, lolol

  Hello Thomas,.

  Welcome to the Microsoft Community Forum.

  1. Which device you are trying to connect to the computer?
  2. You did no particular change in the computer?
  3. A device that has a code 24 in Device Manager?

  Code 24 indicates that the device is not present or is not working properly, or does not all its drivers installed.

  If the error code reappears, check that the device is properly connected to your computer. For example, remember that all the cables are correctly installed, or that the cards are properly housed in their locations.

  See the article: error codes in the Device Manager in Windows

  http://support.Microsoft.com/kb/310123/en-us

  Also try to update the drivers for the device.

  See the article: automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Please respond to this answer, we will be happy to help you.

  Thank you.

• MrtRate non Plug - and - Play driver displays the error message "this device is not working properly, or does not have all its drivers installed (Code 24)."

  Convenience store recommended remove and reinstall to resolve problems.  Cannot locate the driver using the Add Hardware Wizard to reinstall by troubleshooting tips.

  Do I need this driver for my Dell PC under Windows XP Home Edition SP 3 or if I can't ignore the deletion?

  If I need to reinstall the driver of mrtRate, where I can get it?

  Ganeles Hello death,

  Thank you for your message.  After studying this problem, it seems that it is caused by the Quicken software.  Click HERE and run through the troubleshooting process.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Missing non-Plug-and-Play driver?

  I get a message that MpKsl052983e0 is absent or does not have all the installed components. What is - this and how do I get it? I have a Toshiba NB505 mini notebook (a netbook) with Windows 7 Starter, which is maybe 3 years old. Any help will be greatly appreciated!

  Source of the message?

  He is a pilot with the random name that is associated with Microsoft Security Essentials or Windows Defender. A new is created whenever MSE is updated. Occasionally, a reference to a former is left. This will not cause you any problem.

• non-Plug-and-Play monitor generic when win2012 imported from the FVO

  Hello

  I created a virtual win2012 with VMware tools instolled machine. I-ve it exported as part of a vapp, but when I import the vapp, ha win2012 a generic no/pnp monitor that I have to uninstall the OS otherwise start over completely.

  Any idea on how to prevent this issue_

  Hi friend

  Run the command "sysprep" before exporting the machine to the FVO.

  BR

• mvzcc.sys - was created under the system32/drivers folder. This portion of windows or any other file is the software? or is it a virus?

  A new file mvzcc.sys was created under the folder system32/drivers on my widows vista. I managed to clean some viruses and malware on my computer the past 2 days, but this file is created during these days of 'clearing '. (its size is 841 KB)

  Can someone tell me if it's a windows file or any other known file software (or perhaps a driver file)?

  I couldn't find anything on the internet, and when I tried to remove it using the method mentioned here - http://www.howtogeek.com/howto/windows-vista/how-to-delete-a-system-file-in-windows-vista/

  I got an error saying that "a device attached to the system does not work.

  
  

  Please advice.

  Thank you!

  Hello

  No info on Google so this file is probably malware - other than this error there has been another
  indications of malware?

  You can submit them for that specific file control:

  http://www.VirusTotal.com/
  http://VirusScan.jotti.org/en

  http://VirSCAN.org/

  http://www.ThreatExpert.com/fileScan.aspx

  http://www.viruschief.com/

  ===================================

  No one program cannot be used to detect and remove any malware. Added that often easy to
  detect malware is often accompanied by a much more difficult to detect and remove the payload. If it is better
  to be too full now than paying the price much later. Check with them to an extreme overdose
  point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
  in the regular when windows you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
  UnHackMe execution)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download
  It's here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
  How to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
  taken (such as the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows 7 does not recognize my Dell 2407WFP monitor - only as monitor not Plug-and-Play credits.

  This monitor is able to execute the resolution 1920 x 1200 and it worked well on the same laptop Dell Latitude D820 under XP Pro SP3. However, Windows 7 does not recognize the Dell Monitor (shows as non-Plug-and-Play monitor credits) and will go no higher than 1600 x 1200. The monitor on the laptop will run in 1920 x 1200 and also 1920 x 1200 poster XP running inside a virtual machine, so the problem is with Windows 7 not properly recognizing the Dell 2407WFP monitor in VGA mode. All other operating systems work very well to support the material properly.

  The laptop is running a NVidia Quadro NVS 120 M map. I tried several versions of Vista Dell drivers (do not have for Windows 7 - therefore Dell is not to follow). NVidia has no drivers for this card because it specially designed for Dell and all pilots must come from Dell (new Dell doesn't help here - I know that Windows 7 was just recently released but there are important suppliers for some time. Thought Dell was big by taking charge Microsoft with their business line of products but I think that even they cannot follow.

  It seems that the problem is also Windows 7 is not correctly identify the Dell monitor and many other monitors as well. Unfortunately, I doubt that this issue will never be resolved by Microsoft. I have yet to see that all the issues MS resolved long. I begin to see the truth in the last pub in Apple vs MS on television. Well the time to upgrade the new hardware.

  If anyone has a suggestion or a solution to solve this - I'm all ears!

  Don

  wait until that Dell publishes drivers for win 7 or you can contact them for the same thing.

• Plug n play devices moved it espically keyboard drivers

  Plug n play devices will not install the drivers out there

  Windows 7 64 bit

  error says windows configured to never install driver update

  another error is the problem with the PnP devices

  Please help as soon as possible because I do not have a keyboard because of this error

  also says Port_ #0002.Hub_ #0004

  The drivers for this device are not installed. (Code 28)

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver.

  the problem in driver code details 0000001C

  Hello

  Thanks for the reply. I appreciate the troubleshooting that you tried it on the computer.

  The driver is specific to a particular model of the computer.

  What is the exact brand and model of your computer?

  If the driver for this operating system is not available on the manufacturers Web site, we have an option to install the driver in compatibility mode.

  You can also contact the manufacture for support.

  Please respond with the required information. I'll be happy to help you.

  Thank you.

• Disabling RC4 encryption in the Windows 2008 SP2 Server

  Hello

  I just saw through the 2868725 Ko to disable the RC4.

  According to the article, we need to install the KB update, then we need to change the values of registry keys to disable the RC4.

  However, I could not find the download for the Windows 2008 SP2 server file in the download link

  https://support.Microsoft.com/en-us/KB/2868725

  Any suggestion how to disable the RC4 in Windows 2008 SP2.

  Need help.

  Thanks in advance.

  Here is the link for the Microsoft TechNet forum:
  http://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itpronetworking

  Several related to the server forum (not for Desktop/Win7)https://social.technet.microsoft.com/Forums/windowsserver/en-us/home?category=windowsserver

• How can I disable the mouse pad when you use a mouse plug-and-play?

  How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.

  Hello

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I disable USB Plug-and-Play?

  Whenever I plug a camera into my USB port, Windows 7 treats as it has never been plugged in before.   When I plug my iPhone or iPad to synchronize with iTunes, Windows 7 starts trying to reinstall the drivers for it even though I just unplugged it five minutes ago.  When I plug my mouse, I get the same thing.  I use a laptop for the convenience of being able to unplug everything, put it in a bag and take it with me.  It is ridiculously annoying having to wait five minutes or more to start using my mouse whenever I put in place somewhere else.  Have to restart iTunes every time I plug in my phone, because Windows decided not to recognize the device even when I had just plugged in a minute there is delayed.  It is a stupid feature, and anyone he designed by default to this mode should be fired for being a fool.

  (1) you cannot disable

  (2) but you can disable the USB plug and connect service

  (3) START - RUN - type SERVICES. Enter MSC

  (4) in the right pane, find PLUG-AND-PLAY, then right-click, choose Properties

  and then MAKE some disabled

  (5) reboot your system

  (6) before the opening of the session, go to the BIOS settings, select USB controllers all THE

  (7) download and install latest correct chipset driver for your model of motherboard

  website of motherboard

  Good luck

• Disable plug and play audio

  Original title: sandisk
  I plugged a sandisk in 1 of my usb ports and my computer is Beeping at me all day, even with the unit unplugged, and when I went to devixes and printers, he tells me to right click on the device icon and everything I installed my TOUCH screen. so, how do I right click (touch) the icon? AND how can I STOP the beep of thia?

  Hi Marsha,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you want to disable plug and play audio.

  I suggest you to read the following steps to disable Plug and Play audio.

  a. right on the icon of the computer located on your desktop or in the Start Menu. Then select Manage from the drop-down list.

  b. in the computer management window, go to "system-> Device Manager tools.

  c. on the view menu, select 'show hidden devices '.

  d. expand the list of devices under "-pilot no Plug and Play", and then select beep.

  e. right click on the element to beep, and then select Properties.

  f. in the 'Beep properties' window, go to the driver tab.

  g. in the startup section, scroll the list Type, select Disable and click the OK button.

  Touch screen refer to the following Microsoft article:

  http://Windows.Microsoft.com/en-us/Windows7/using-touch-gestures

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Does not, XP 8176 controller plug-and-play

  I have a system controller 8176 under XP. OR PXI-devices are not detected plug-and - play. Last XP and OR corrections updated. The system has 512 MB of ram and > 10 GB of free space on the disk. No "yellow marks" ion device with the exception of the PXI advice Manager.

  I have several different devices PXI, 6608 timer, 4461, etc. 5406. None are detected PNP.

  This works: => Control Panel Add material etc.

  Device Manager-online-online 'New Hardware Detection' data acquisition devices does not work

  Whenever I put to update MAX, all PXI devices date back to be undetected, with a yellow exclamation point in Device Manager and MAX the device has an 'X' mark and a symbol of the plan.

  Repeat Controll notes-online hardware etc add the hardware and then things work very well from there once again.

  I tried to remove all cards except the 6608 timer, but it is still not detected.

  Any ideas? Is it possible that I miss some of the software components?

  Thanks in advance

  It was just the XP "Plug and Play device host Universal" service that had been disabled...