Missing pieces of waveform

Similar Questions

• Where can I get the missing pieces to my keyboard/mouse wireless laser 7000?

  Original title: 'wireless laser mouse/keyboard 7000.

  They gave me the laser wireless 7000 mouse and keyboard but no manual or instructions. I also think that miss me a 'Flash Player' or 'bluetooth' parts?

  Where can I get the missing pieces
  Advise project managers

  Hi Tbackus,

  You can check with the hardware support to set up the keyboard and mouse:

  Drivers, software and documentation of your product

  Hardware support

  For missing parts, you can contact the Microsoft order desk and check.

  In the United States customers contact the service of orders from Microsoft at the following number:

  (800) 360-7561 Monday to Friday from 05:00 to 19:00 Pacific time.

  Canadian customers can contact the Canadian order desk at the following number:

  (800) 933-4750, from Monday to Friday from 05:00 to 19:00 Pacific time.

• Y650 missing piece from the bottom in the Center.

  I have a Lenovo Ideapad Y650. On the bottom in the Center, there was a piece in the shape of x. This morning I looked at my phone and the piece was missing. I called tech support and they told me that because I lost the piece, they would consider of it customer damage. They also told me that I have to send my laptop to replace the entire lower cover. They said it would cost me $160 even though I have the guarantee of accidental total coverage. I was wondering what was the small part and if it is useful to make the lower lid replaced.

  as I've seen, there is no big problem but still it is up to you.

  (I think it was pod)

• Read a piece of waveform data

  Hello!

  Is it possible to read the values y of a parcel of waveform in waveform's history?  In particular, I have some data plotted in a waveform and want to get all the points of y between two sliders in a table to make a FFT.

  I use Measurement Studio 2008 and Visual Basic 2008.

  Kind regards

  Andreas

  I discovered for myself. I did it this way:

  Sun data (XYPlot.HistoryCount - 1) As Double

  For index As Integer = 0 To XYPlot.HistoryCount - 1

  Data (index) = PlotX.GetYData (index)

  Next

• Missing PIECES. Impossible to update.

  I give up! All I want is to upgrade my computer.

  I tried to update my computer for a long time now. I can't update my Security Essentials, Windows, or HP.
  I looked around, on the internet and finally found out that I'm missing bits in my services. So, I think I screwed up and found a (valid) site that showed me how to add it in... so I did. Now I get "error 2' when I try to start the service."

  I don't know what program to use to show you all the information you need (just tell me and I'll post it).
  Windows Vista Home Basic - Service Pack 2. »

  Thanks in advance for any help. Sorry I am not very informed on this topic :/

  You are welcome.

  You can run a scan with the two following applications just to see if they do anything:

  TDSSKiller:

  http://support.Kaspersky.com/FAQ/?QID=208283363

  Malwarebytes anti-malware (free version) - do a 'full ': Scan

  http://www.Malwarebytes.org/products/malwarebytes_free

• Store missing piece?

  Hello.

  I have hard reset my phone earlier. When I was I could not find store Play... Tried to download an APK of the store to play, but it just hangs. When my mother updated its Xperia Z at 4.3 JellyBean, she also disappeared. Why is there no game store when put you to day/reset your phone? And how can I fix this without rooting?

  Kind regards
  Örjan Danielsen

  Unfortunately, you must be able to get a connection with the USB cable directly to the phone for repair of software. You tried to perform a factory normal reset via settings > Backup & reset > reset of data? Or are you able to try this on your moms since she experience the same behavior?

  You might also make sure that Google game store is not disabled via settings > applications > tab "Disabled". If you find here, tap on it and choose 'enable '.

• Missing pieces in the brush drop down tool?

  I have problems with items 9 and its drop-down menu for the MODE selections for the Brush tool. My teacher for my online class has a photo tutorial that looks like this:

  

  See where it shows the color and brightness?

  Now, mine looks like this:

  

  Where are the selections of color and brightness for the Brush tool in selection MODE drop-down list?

  A friend of my downloaded the trial version and she said the option was there. My teacher has an earlier version, probably 7 or something like that, I'm not familiar with it. In fact, I don't know anything about the elements, that's why I take the class initially.

  Can someone help me? I posted on my class discussion forum, but no one, not even the teacher, replied to me and this assignment is due soon...

  Try the suggestions on this page (works for scrollbars from the drop-down list brush mode).

  http://kb2.Adobe.com/CPS/865/cpsid_86508.html

  MTSTUNER

• iTunes fails a few pieces of cd import

  I'm putting a 7 - cd audiobook on my ipod touch via itunes.  Then I import the disks in a new playlist in itunes.  I used the button name identification information and number of my disks, which worked well.  But when I look at my playlist, I noticed that many of my discs start with track 3, 5, etc.  What I have to start over or can I import only the missing pieces.  And why did this happen?  Thanks in advance for any help.

  I tried to re - import one of the disks that worked, and then deleting the double tracks.  It's tedious, but it worked.  Then I tried importing only the piece missing from a different drive, stop importing after I get the green check mark.  That did not work.  Is there an easier way?

• I seem to be missing 'Windows movie maker HD' - any ideas how to install it?

  My new laptop came pre-installed with Windows Vista Edition Home Premium.
  "Windows Movie Maker HD" is supposed to be part of this version of windows.
  My laptop came with a recovery disk, not a windows installation disc, is this correct?.
  How do I get/install that missing piece of software?

  Thank you

  John.

  Hello

  The product recovery disc is an exact image of the operating system that was created on the first installation at the plant where the machine was made. Basically, this disc is your copy of Windows, if indeed you're right.

  In Windows Movie Maker HD is, get on my laptop here I only have Movie Maker installed, and it is through a copy of Vista Ultimate retail. The HD of the software part is intended mainly for import from HDV cameras, and the connectivity features need not here then it's not only available as an option.

  As far as I know Windows Movie Maker and Movie Maker HD alike well enough with the additional functionality.

  I hope this helps. I will look into this new and keep you :)

  Kind regards
  Nukey

• My h9 - 1215t Phoenix HPE is missing in the form of graphics card.

  Hi all. I recently bought a desktop Windows 7 model HPE h9 - 1215t Phoenix from the HP store. The day before I placed the order, the computer was available with the Nvidia GTX 680 as an option, but deleted the day I bought the computer, so I ordered the computer and bought an EVGA GTX 680 instead (Yes, cost me about $300 + extra too). Well, today, a week or two after you received the computer, I had the chance to open and take a look at the plug on the side of the PSU to be sure that I am able to run a 680 GTX in there, because it requires at least a 550w power supply at least 38A the 12v rails. I knew I was good on the 550W as it comes with a 600w PSU, but I wanted to check the amperage of rail. So I open the housing cover side and take a look at the PSU, and I see that I should be able to run the graphics card very well and a call to technical support available EVAG explaining what I confirmed it. But then I noticed something off the computer pedal. I noticed that there seemed to be different from what I saw in the manual, on the HP support site and tear down/install videos. Then I realized, IT LACK THE CONSERVANT SUPPORT of CARD GRAPH. This support is essentially a medium which has two functions, first of all, it supports graphics cards that are installed in these computers, as they can be big and frame h9 more small/more low need help a little. In addition, it supports and adds stiffness to the chassis/body itself. Well, I looked on the housing cover and of course, there is a diagram showing the missing piece, and how you should remove it to work on the computer. I was on the phone all NIGHT HP, fired back from technical support and sales and tech and sales and so on and so forth. After-sales service was good and they seemed like they really wanted to help but could not, support seemed like they did not give two * s, is if you could even understand them well enough to revisit their behavior. After having recited my S/N and the model number, name and address and million times I gave up. Supervisors do not help yet. Sales gave me an option indicating that they would send me a new one, but, that I had to pay for the new and the accusation that is held on my card until they received a new once I removed the stand and put it on mine or just returned my old one. This was not an option that I don't have an extra $ 1,000 on my line of credit, as well as, given the fact that I WOULDN'T have to DO. It's HP high time f *, now why in the heck do I have to buy another computer, so they will fix the problem?

  http://support.HP.com/us-en/document/c03028387

  The support is shown in this tutorial from HP that precedes, it appears in "Step 2" and "Step 3"in the tutorial."

  Now my question is, one, someone already had this problem before? Because it really seems to be as if the person build this forgotten CTO computer reinstall the support when he'she finished the job and he bundled. Also, my other question is, WHO in the heck do I talk to to get this replacement part. Because that of course standard HP support is room runable, or not of the all ready to help me with the problem. Anything short of this computer back or get a replacement can be done? Is not an option that I use this computer for work, and I absolutely can't be without him for more than 1 day and I absolutely refuse to buy, or even let put them a cool/warm on my card for the additional amount for a new computer, because it's not my fault, and I would not solve the problem. HP needs to fix. I don't understand why someone can't just get a model h9, pop the * er open and put the dang game in the mail. When did things get so complicated and such to where people can't complete this simple action? Can anyone, anyone at all help me? Anyone from HP? I would really like to hear your opinion and your explanation as to why your emplyees completely refuse to help me. Seems as if HP now has my money, for this purpose, they don't give 2 of those stinking.

  @Win7Loyalist:

  I understand your frustration when something isn't quite right with your new test bench.  I've been there.  You paid a lot of money for a complete system, and you wait until it is complete.

  I also own an HPE Phoenix system, and I have a model h9 - 1120t with an i7 3770 k liquid and a GTX 670 which I added myself.  Mine is a Power Edition MSI GTX 670, which is Overclocked at the factory and is actually a bit better than a reference GTX 680 model.

  But I hope I can ease your frustration a bit, unless you have already found or bought one of the supports.  If so - you can skip reading any further.

  This metal bracket is not required to be left in the case, and it is designed for the purpose of shipment.  Yes, it supports and rigidity was added to the case, but this is necessary only when shipped, and not when its definition in your office or anywhere where you put your home.  The Phoenix case is not fragile and didn't need added support when in your office.

  I already had my GTX 670 graphic card when I got my rig to Phoenix, and I removed the clamp support immediately and have never used.  He has been since then in the area of HP in my attic.  I have have my system for over a year now and can you - you have no need (or want) that ugly support in there, unless you plan from somewhere, this shipping system.

  Because you must return your system to its original configuration if you need to send back to HP for warranty service, you must deliver 630 GT little in it anyway, and it's so light it will not need the support.  I suspect that's why they left.  Of course there's always someone just forgotten.

  In any case, I understand that you should have the support you are 100% right about this, it is not necessary, but I don't want mine here.  I spent a bit of time to clean the birds nest of wiring that HP did (it was a mess) and I really "tightened" and straightend the wiring inside my case and having decent airflow.  Much better than the factory.  This just square would stand in the air, not to mention that it's ugly.

  I'm surprised that its hard to get a good.  That makes no sense at all.  It's like a $5 coin.  I'd sell you mine, but I have a year left on my warranty and I need if I must refer the drill rig to HP for anything whatsoever.

  In any case, enjoy your Phoenix is really a very nice gaming platform.  I can launch ANY game of current generation such as BF3, Bioshock Infinite, Skyrim, Tomb Raider and even Crysis 3 - on the highest settings at 1920 x 1080 and get great frame rates.

  I said it before and I'll say it again, I really don't understand why HP has never promoted this platform.  It was obviously intended to go against Alienware, but no one has heard of the HPE Phoenix system.  HP does not appear to worry about marketing or promotion of this system at all.

  What a waste.

• Redeclenchables/continuous to a custom waveform analog output?

  Hello

  I try regular output an analog signal using the box USB-6211 and Labview2009. I looked at various examples of waveform, including the retriggerableAO.vi example, but I can't seem to understand how to send a 'waveform' custom stamp (terminology is perhaps the question). In all the examples (including waveformbuffer), I ran across the single waveform, the options are sine, square, etc.  Previously, I posted on this forum looking for hardware suggestions (link here) and explained what I try to do and got the big help. To sum up, I would like to read a 'waveform' from a text file, send it to the usb-6211 buffer and then continue to an analog channel. At the same time, I'll use the beginning of the analog task to trigger a digital signal once per cycle as well.

  I got in what concerns the establishment of the waveform, but am stuck to figure out how to get into the buffer and setting the frequency, etc.

  Thank you

  Gabe

  Hi Gabe,

  Dennis is correct that it will take some room to modify the existing screws to fit your need.  As he says, the Con Gen tension Wfm - Int Regeneration.vi Clk - no example provided with LabVIEW.  In the example, it can be shown that there is a custom VI used to explain the problems that arise when a waveform of a given frequency to a frequency of sampling and outputs analog specified.

  With all that said, it seems you want to read from an existing waveform file that you created and this waveform to an AO output channel.  There are a few things that will be needed to know before proceeding:

  -What is the waveform as you try to output (5000 samples, 10 k, 100 k, etc.)?

  -What pieces of the size of the wave you want output (100 samples at a time, etc.)?

  -you want to again and again, or simply run through once the waveform looping?

  Assuming that you already have the waveform and will only step by step, here's what I would like:

  -break the large waveform into smaller pieces of waveform of standard size

  -import the waveforms in LabVIEW and create an array of waveforms

  -bring the waveform in the example Dennis mentioned previously with automatic indexing enabled on the tunnel

  -Remove the generator of wave functions existing the while loop

  -wire your indexed table of waveform for the data of the VI DAQmx of analog output terminal

  It is possible that you will have to play with the settings of your waveform and timing of your VI, but this should be a good starting point.  Please let me know if something is not clear or if I have misunderstood your original message.  Have a beautiful reast of the day.

  Best,

• WVC210 missing controll buttons in «See the video»

  Hello!

  It sems miss me buttons zoom and snapshots in the page "see video" for my camera. I saw pictures and videos of others using the same model, and they have more options above the buttons to pan and tilt. I tried different settings and also tried with IE and Firefox on different PC but always with the same result. I noticed that there is a difference when you use FF instead of IE. With FF, there are missing pieces in the installation program for the detection of movement. Control of sensitivity and are missing. No doubt som activeX plugin missig or something, but it's the same on three different PCs: I've tried so far.

  My browser settings?

  Example: http://docs.google.com/Doc?id=dhbzwrnw_0df5qh4cp

  Hello!

  Thank you for you answer. I will try your suggestions later in the evening. I am running Vista on most machines, but also tried on XP with no luck. I've been tinkering with different settings for ActiveX and Java (like Dotnet) in IE and FF but nothing has worked.

  (P & T works but the zoom buttons, snapshot, PT with 'point and drag' and output video choise is missing on the page)

  Last night, I downloaded IE 8.0 well and eventually got it to work!

  Don't know why but at least I saw the features that I wanted and that you can continue to set up my camera and concern to fix the rest later. It's amazing how something so simple as a camera can take as long to implement. (Fun to learn something new so :-))

  Next step is to receive alerts by workstation (my ISP requests SSL with no exceptions). As I wrote in a different thread, I won't use any PC on the network with the camera. Just a 3G router and a modem. What makes my limited options as to find a workaround for mail.

  Thanks again!

• Windows Media Player 12 deletes the songs in library when I add missing album art

  It is a question that I need answered about two weeks ago, but I just figured out how to fix it. Just go to your folder my music. Find the missing pieces of the library. Select all, right click and select Properties. Clear the hidden check box and click on apply and then OK. Select all the songs, right click and add all the songs in windows media. The songs should be added to the library soon. So if you encounter the same problem, I hope this helps you. I don't know if this is a bug or what, but it's annoying. It also deletes the songs with boxart.

  Note: I've already deleted the database and rebuilt so no that will not solve the problem.

  Hi demo,.

  Thanks for providing the resolution. If you have any comments please provide feedback in the following link:
  http://mymfe.Microsoft.com/Windows%20%207/feedback.aspx?formid=195

• File recorded incorrectly and parts of the image are missing

  I was working in Photoshop CC and saved that I made changes.  I have added teeth, skull, the eyes and recorded.  No problems.  I added the background and not registered, no problem.  I added the flame and saved... photo is destroyed.  When I clicked saved it changed the image and now the bottom is that partially, the flames have missing parts, the dog has missing pieces and my picture once done for a class assignment is destroyed.  If there is a solution, please help me.  Otherwise I'll have to go back and redo everything.  Which waste far too much time because I have 3 other assignments to do and who does not understand to make posts on the site of the student and watching the video tutorials for other assignments.

  Here is the version incorrectly saved as a png image of the image that it was recorded so wrong what he was:

  

  Help, please!

  Julie S.

  Please see file saved incorrectly and that some parts of the image are missing

  (Double Post)

• Photoshop elements 12 file archive part is missing, and I can't install it on my new computer.  How to solve this?

  I downloaded the two parts, but when I try to install it I get an error message that says:

  The file archive part of Adobe Photoshop elements 12 is missing.  You need all parts in the same folder in order to extract the Adobe Photoshop elements 12.  You can download all the parts.

  So, how can I find the missing pieces?

  I use windows 8

  you need both exe files 7z.  put them both in the same directory and double-click on the exe file.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".