Mistakes WMC CLR20r3 / ehshell.exe... Help, please!
When I go to Windows Media Center, it is no longer opens and instead gives me an error. I have no idea what this means but tried looking for it and found no real answers.
Hello
1. do you remember any changes made on your computer that could have caused this?
This problem occurs if the Windows Media Center update process (Mcupdate. exe) cannot access the database of Windows Media Center. You may experience this problem if the data store is corrupted. So, try to rebuild the Media Center data store. To do this, follow these steps:
Method 1:
(a) exit any running instance of Windows Media Center.
(b) remove the file from Store.db to mediaCenterData. By default, this file is located in the following location:
%SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB
To remove the file, follow these steps:
(a) click on Start , then run .
(b) in the Open box, type run and then click OK
(c) If you are prompted for an administrator password or for confirmation, type the password, or click continue .
(d) in the Open box, type %systemdrive%\programdata\microsoft\ehome , and then click OK .
(e) in the details pane, right-click right mediacenterdatastore.db and then click Remove .
(f) click Yes to confirm that you want to move the Mediacenterdatastore.db file to the trash.
(c) now launch Windows media center and check it out.
Method 2: . Click on the Start button, click principally made programs, accessories and then right-click on command prompt, in the right-click menu, click Run as administrator.
2 type the following commands, press ENTER after each line.
regsvr32 atl.dll
CD C:\WINDOWS\eHome
ehSched /unregServer
ehSched/service
ehRecvr /unregServer
ehRecvr/service
ehRec.exe /unregServer
ehRec.exe/regserver
ehmsas.exe /unregServer
ehmsas.exe/regserver
If the problem persists, proceed to reinstall Windows Media Center:
Method 3:
a. open the configuration/programs and features Control Panel.
b. click on "Turn Windows features on or off" in the left pane.
c. expand "Multimedia functions", uncheck "Windows Media Center". Click 'Yes' to continue and click OK to exit. Then restart.
Note: If you turn off your WMP, Windows Media Center will be off either. You may need to reconfigure the settings for Windows Media Center after her reactivation.
d. open "Turn Windows features on or off" again. Activate the 'Windows Media Player' and 'Windows Media Center' features. Turn it back on.
If the problem persists, proceed to reinstall Windows
For more information, see the link below:
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-sound/Windows-7-Media-Center-stopped-working/191d41f4-a0a2-4a74-B051-7d0a311316ee
I hope this helps!
Tags: Windows
Similar Questions
-
Trojan.Dropper on ntoskrnl.exe - help please
I did a scan with Norton and no problem has arisen, however I did a scan with Spyhunter3 and he found a Trojan.Dropper virus in the ntoskrnl.exe. How can I fix it?
The path of the file he has identified is C:\WINDOWS\$hf_mig$\KB890859/SP2QFE/ntoskrnl.exe
Things, I read, I can't just delete the file - the computer needs this exe file...?
Not sure how it can be cleaned?
Suggestions for a beginner would be appreciated.
Thank you
Hello
I suspect a false positive.
You can download it again and too install KB890859 here:
Also add Prevx to your safety and your scan with Malwarebytes.
Prevx - home - free small, fast and exceptional protection CLOUD, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
Avast and Prevx running except a low occasional (not much), updated cookie and then run it as
a scanner. I have a lot of scanners and they never find anything of note that I started to use this configuration.Rob - bicycle - Mark Twain said it is good.
-
Ehshell.exe producing too much CPU, not even under WMC
I've never run WMC (Windows Media Center), and again, I see this name in the Manager of tasks (ehshell.exe) and produced at least 45% + cpu and eating all my memory.
My pc;
Manufacturer: Micro-Star International Co., LTD..
Processor: Intel (r) Core (TM) 2 Duo CPU Hz T6600 2.20 2.20 Ghz
Installation of memory (RAM): 4.00 GB (3.25 usable)
System type: 32-bit operating system
Pen and touch: touch available with 2 Points of contact
Any help?
In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wikiIf you have any questions do not hesitate to ask -
I bought Halo 2 for Vista, but who like OS Windows XP Pro, just can't launch the startup.exe, I search the community, there is a rumor that it won't work even with the patch. Can someone help, please?
Unfortunately, Halo 2 does support Windows Vista and more. Windows XP is not supported. There may be 3 party hacks that can make it work, but they are not taken in charge and potentially dangerous.
Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)
-
I just deleted all the pictures in my Gallery to Windows Live Photo by mistake help please
I tried to make a few albums in my Windows Live Photo Gallery, and somehow I deleted them by mistake. Help, please.
You will find support for Windows Live Photo Gallery in this forum: http://windowslivehelp.com/forums.aspx?forumid=cafb0556-8959-49b9-afeb-635314aa02f3
PS: I hope that you have backups!
-
As the title, how can I use process Explorer to check PID 1176 60% CPU svchost.exe? Help, please.
The task manager has PID 1176-60% CPU, all the time, which I believe is the reason my pc works so slow.
How to use Exp Pro to know what is actually using 60% of my cpu, via svchost 1176 PID?
I found the Exp Pro Geek guide - but are struggling to pass for a non geek.
Using Vista 32 bit.
Thanks in advance for any answers.
Process explore uses more resources than svchost, it works automatically using a lot of memory. Anyway, the open task
Mgr, locate the svchost, R.click on the location of TI/properties/open a file. You will find that it is a service of microsoft.
The drain is usually in BITS, try to go to run, or cmd, type: services.msc in msc, locate BITS, R.click on it, open,
Set to manual start, exit msc, restart the pc.
-
Help please! How can shieldsoft.exe I remove this?
The detailed error message is given below. Help please
Signature of the problem:
Problem event name: BEX
Application name: shieldsoft.exe
Application version: 0.7.6.11
Application timestamp: 563739f8
Fault Module name: ntdll.dll
Fault Module Version: 6.0.6002.19514
Timestamp of Module error: 561e7b93
Exception offset: 000c75c8
Exception code: c0000005
Exception data: 00000008
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional information 1: e705
More information 2: 51040ad2a63f4eb19a16f331dfe1e29b
3 more information: 7a9b
Additional information 4: 4e42a274c7bd9d926bb6e814210f6e2fIf it is listed in the Control Panel, remove it with this tool.
Revo Uninstaller
http://www.revouninstaller.com/revo_uninstaller_free_download.htmlIf it was or was not registered, follow up with these freeware tools.
AdwCleaner (free)
http://www.bleepingcomputer.com/download/adwcleaner/Malwarebytes (download the free version)
https://www.Malwarebytes.org/free/When offered, uncheck the box: activate the free trial version of Malwarebytes Anti-Malware bonus.
Junkware Removal Tool (free)
http://www.bleepingcomputer.com/download/junkware-removal-tool/ -
C:\Windows/system32/cmd.exe error. Help, please.
My computer is Windows Vista. When it boots, a black screen with C:\Windows/system32/cmd.exe happens. It freezes and will not respond. I can't type or even close this box. Help, please. I'm not a computer expert, so the simple step by step instructions will be appreciated.
It does not start in safe mode. Is there a way I can fix this in safe mode?Hello
1. have you made changes on the computer before this problem?
2. do you get any error code or error message?
I would suggest trying the following methods and check if it helps.
Method 1:
Start in safe mode and then put the computer in a clean boot state in order to determine which driver or program is causing this issue.
Step 1: Boot in SafeMode in Windows Vista:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135
Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.
Method 2:
Restore the system to a point when the computer was working fine and check if the problem persists.
What is system restore?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
For more information, see the following link to learn more about system restore:
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
Hope the information is useful.
-
I have a Trojan virus located in (C:\windows\svchost.exe)! How can I get rid of him? Help, please!
Hello
1 are you facing any problem with the operating system?
2 have you made changes on the computer before this problem?Try the next method and check if it helps.
Method 1:
Run Microsoft Safety scanner and check if there are any threats found.
Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Note: the Microsoft Safety Scanner expires 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.Method 2:
Make a file system checker and check if it helps.
To run a SFC scan, follow the steps described in the following Microsoft article.How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista: http://support.microsoft.com/kb/929833
It will be useful. -
I can't load my video or chat online it says I need 2 install adobe flash 10 drive I install but when I try always says I need to install 2 I think I deleted a driver by mistake help please thx
Hello
Flash can get corrupted
Download and save the uninstaller flash on your desktop or wherever you like from the link below
then right click on the uninstall program saved flash and run as administrator and uninstall flash player
http://kb2.Adobe.com/CPS/141/tn_14157.html
then download the latest version of the reader direct flash from adobe on the link below
Uncheck the 1 google toolbar before downloading
http://get.Adobe.com/flashplayer/
and for more information on this problem if needed:
below link is Adobe flashplayer support forums:
http://forums.Adobe.com/community/webplayers/flash_player
help troubleshooting Adobe flash player
-
Original title: received message 'disk full '. I can see 933 GB of free space when I display the properties of the operating system (c :)) help, please!
New computer - Dell Inc. 05DN3X (CPU 1), MS Windows 7 64-bit SP1, processor Intel Core i7 930 at 2.80 GHz, 6.00 GB Triple - Channel DDR3 @ 666 MHz, 977 GB Western Digital WDC WD10EALX - 759BA1 (SATA).
Problem:Downloaded a program (32 MB) (SRIM 2011.exe) commonly used to work and tried to extract it to a new folder on the OS (C :) - received message 'disk full'.) I can see 933GB free space when I discover the properties of the operating system (c) - Quota is turned off.Have used the program mentioned above (SRIM.exe) several times before using different operating systems XP to work without problem...Help, please!THXGiven that this was written in 2011, I'm sure you understood something at this stage. However, the post also has much a views, so I think it might be a persistent problem, so I'll post my solution:
When I copied the file SRIM - 20xx.e in a folder of SRIM-20xx under Program Files, I had a "Disk full" error when trying to extract the files, even though I had a lot of space on my hard drive and without limits. After a bit of messing around, I like the solution is to move the SRIM-20xx folder on the desktop, and then unpack it. After extraction, which leaves you with a lot of seemingly useless files, double-click CONFIGURATION and the installation will begin appropriate. Installation will create a file under Program Files, there will be no need to make things happen later, simply remove the meantime extract the folder to your desktop computer.
-
The Windows Media Center has things where I can watch vidoes watch pictures and movies and tv watching sport and see my tasks and extra.
When I look at the title of the property, in general, the file is called: ehshell.exe
It is by Microsoft Corporation any accident about 2 months ago that just, it started showing the Windows Media Center.
Help, please!
Hello
Run this fixit:
-
Hi, I really really need help. I have a Dell Optiplex 330 with windows xp pro. I tried to restore to an update of the service pack, and while he was complete I got this blue screen. I'm sure its a mistake with winlogon.exe. However, I don't know exactly what to do to repair or replace. I have my recovery disk. Help, please.
I no longer need help. It took a little while, however, I was able to remedy. Yes! I'm not a computer expert or anything, but I've never needed the Geek Squad. However, I called almost done for this one. Laughing out loud. I'm so happy that I didn't have to reinstall the operating system. I have all my info. Yes! I keep large files so all my disks are always within reach. I was able to replace all bad files for registration through the recovery console. Once you understand the computer language, the easier. There is hope. If someone needs information just ask.
-
My touchpad light can, t activate. When I double tap, the yellow light can not even turn on. Help, please.
Hello DS1994,.
Welcome to the forums of HP.
Please try to reinstall the driver:
http://WHP-hou4.Cold.extweb.HP.com/pub/SoftPaq/sp48501-49000/sp48843.exe
Make sure you restart your laptop after the procedure.
+ Make sure you press exactly on the light itself, I know that some laptops fighting a little more than others.
Drunks.
-
I clicked on something by mistake and my menu bar got extended as it used to be in earlier versions of Firefox as file edit view history bookmarks tools help... all in the same line... it is now my screen look clumsy coz of the new version. So, I want the menu back bar because it is in the new version. Help, please
You see the orange (on Linux gray) Firefox button if the menu bar is hidden, to hide the menu bar through the view > toolbars, also accessible via Firefox > Options.
If you need access to the hidden menu bar press F10 or press and hold the Alt key to display the menu temporarily bar.
Maybe you are looking for
-
Portege A100: where can I get the recovery disk?
Anyone know where I can get the recovery for my portege a100 disc as my one was lost in a recent move of House as well as all my other software.any help would be received with gratitude
-
Printer not scan with the recent upgrade of Mac.
I upgraded my Mac OSX to 10.6.8 and now my HP PSC 1410 don't scan. I downloaded the Mac OSXupdcombo and the HPPrinterDriver2.16.1.dmg, installed and rebooted, but still does not work. Do I need to uninstall the printer? I don't want to lose the print
-
How can I farm Metro application other than by using the Task Manager?
How can I farm Metro application other than by using the Task Manager? If there is no way, please add a close button, Microsoft.
-
"Windows install module stopped working and was closed".
I get this error message when I try to install the windows updates, or install. I am also unable to start the repair at the sfc prompt service. The windows defender service seem to be able to install updates, the update report.
-
Windows Media Player-internet radio streams don't play
Problem of Audio streaming with WMP__ Hello I try to play the audio with wmp as a customer of an authenticated http stream internet radio (continuous 24/7). WMP stops playing each time meter hits 99 h and 23-25 minutes. I get the same result of diffe