Mix and scrolling

Similar Questions

• How can I mix and match different amps and cabinets?

  I'm running Logic Pro and still have a problem with the amp Designer. I read in the world how it is easy to mix and match different amps, cabs and pickups but the drop down menus where I should be able to select them all are disabled. I can browse all presets of course, but I can't mix and match.

  I found some advanced tools in the preferences and activated all the boxes in there, just to see. The question remains the same.

  No idea how I could get these options enabled?

  No problem here. Once you select a different amp and Cabinet, you should see 'tailor-made' next to the model on the left.

  

  I don't think that the patches have nothing to do with him, but have you downloaded all the additional sounds, in particular "the guitar"?

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• While on a page web, using one of several browsers, it will take off and scroll down without any input from me. Seems to be intermittent but annoying. All solutions?

  While on a page web, using one of several browsers, it will take off and scroll down without any input from me. Seems to be intermittent but annoying. All solutions?

  This could be a case of interference.   Read this document about it.   Think about the suggestion of new electonic or other nearby wireless devices.   I recently read the someone pen wacom being the culprit.

  Potential sources of interference Wi - Fi and Bluetooth - Apple Support

• Satellite L50 - B - lost touchpad pinch and scroll functions

  One day I realized that I had lost pinch and scroll on my touch pad functions. Do not know why.
  So I tried to install a Synaptics Touchpad driver. This provided the missing functions but got delayed cursor and the sensitivity of the touch pad is limited to a certain place. So I uninstalled the synaptic driver again.
  The sensitivity has published healed but I still had no function of pinching and scrolling on the touchpad.
  So, I went on the download site of Toshiba and learned that the pilot of the ALPS was the original driver.
  I tried to install this driver (as requested for 64-bit).
  The installation seems to go smoothly. After start-up, there is still no functionality of pinching and scrolling and anywhere the driver is found neither in the list programs or added to the 'mouse' screen in the functions of the system folder.

  How can I get that pinch, zoom in and do scroll back to my touchpad functions?

  This looks like interference of program, you will need to perform a clean boot and disable the firewall and antivirus and then try and install the driver. Here is a description on how to perform a clean boot, https://support.microsoft.com/en-us/kb/929135

• Remote control stop scrolling left and right while he needed video first put in pause and scroll any help?

  Remote control stop scrolling left and right while he needed video first put in pause and scroll any help?

  It was an update designed by tvOS 9.2 to the user of the address which have been accidentally scouring...

  http://www.CultofMac.com/420160/scrub-through-video-on-Apple-TV-in-TVos-9-2/

• Conexant HD SmartAudio 221 (stereo mix) and on Satellite A300 Vista

  Nice day

  I think we're in 2008, not 1970

  What is this card that it doesn't support stereo mix?

  I have Toshiba A300
  OS: Vista
  Sound card: Conexant HD SmartAudio 221 (microphone and speakers... (FuNny)

  I tried all means, do not tell me to check the dissconted devices or in showing... the driver for the stereo mix is not there and not displayed them at all...
  my old laptop is better than this new...

  Good luck to you, by 2050, I think that at this time, you will return to use as mainframe legacy systems > Lo0o0oL

  Do you have new updates of the driver get 'Stereo mix' and all enabeled options?

  You feel better now? I mean after writing all this here.

  By the way: what INFERENCE did you exactly?

• T410 AiO customer CAPS, NUM, and scroll keyboard stop does not work with PCoIP view desktop computers

  We have problems with our t410 AiO customers, where the CAPS, NUM and scroll stop lights on the keyboard do not work with view PCoIP desktop computers.

  I found the below information and a work around:
  If you use the Protocol PCoIP to display on a client system Ubuntu 10.04, the CAPS Lock, NUM Lock, and Scroll Lock lights on your keyboard do not work with desktop view. Although the lights do not work, the keys themselves work.
  Solution: Set the following configuration in a configuration file, such as/etc/vmware/config:
  mks.keyboard.useXkbSetNamedIndicator = 'TRUE '.

  The problem is this difficulty is already in place via the latest version of the HP, Z6A440, software that is installed within our Organization.

  What I discovered, is that the model that we initially bought for the test doesn't have this problem.  However, the models that we ordered since that time, DO have the problem and the solution above does not work as expected.

  The model originally ordered for test is still a customer of IOA t410... but there are 4 "under models' for customers of IOA t410... that we have to test is a H2W20AA, while those we receive and distribution are the H2W21AA model.

  No idea why, when connected to the desktop from view, that models of H2W21AA have this problem?

  H2W20AA is with Teradici PCoIP optimized, which can support PCoIP better, but H2W21AA is not with Teradici. That's the difference.

  However, the issue that you are experiencing does not matter in fact, we have not heard of this problem before. I would suggest that you do the following to see if there is no change:

  1. Go to download the latest VMware View 2.3.4 for t410, follow the instructions to install.
  2. If suggestion 1 does not work for you, try to connect to another VM group or set up a new machine virtual clean
  3. Call HP service center to save your problem for further investigation if the suggestion above did not work

• Page begins to jump and scrolles to the bottom of the page.

  I had a poblem with my computer, try scrolling to the bottom of the page.  It happens in all programs.  For no reason I can see that page just started jumping up and down and scroll down.  The only way I found to stop it, so far, turn off the computer and restart it.  It works for a while before that happens all over again.  Anyone have an idea how I can stop that.

  Hello

  1. which version of the operating system you are using on the computer?
  2. what version of Internet Explorer on the computer do you use?
  3 did you do changes on the computer before the show?
  4. you use a laptop or a desktop computer?

  You can check if the problem occurs in safe mode:
  You can consult this article for safe mode.
  In Windows Xp:
  http://support.Microsoft.com/kb/315222
  In Windows vista:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  Windows7:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

• I have several XP Pro PCs on a network and install a new mixer and re-install a NAS driving etc the Bonjour service ' should output "on several PCs

  Hello, the Service stops

  I have several XP Pro PCs on a network and install a new mixer and re-install a NAS driving etc the Bonjour service ' should output "on several PC. Although I was able to restart the service through administrative tools, Services I would like to understand why this service should pick out? It involves service of buggy code that can't cope? I've rarely met other Services just to die. No idea why this is happening and how I could avoid happening again as a normal user do not know how to fix it.

  Unless you have Apple computers on your network (or a PC with the Apple software like iTunes and you share iTunes music between your computers), you need not Hello.  Just, stop the service and set its startup type to manual or disabled.

  Hello Apple support page

• How can I turn off the beep sound on Num lock, cap lock, and scroll lock keys

  How can I disable the beep on the cap lock NumLock and scroll stop?

  There is a good chance that you can turn off the beeps by pressing the NumLock key for a little more than 5 seconds. Here's where the ToggleKeys setting are stored.

  Go to the Ease of Access Center Control Panel and click make the keyboard easier to use.

  

  Search for Activate the ToggleKeys in the section make it easier to type and uncheck Activate the ToggleKeys. You can uncheck turn on ToggleKeys by pressing the Numlock for 5 seconds more.

  Be sure to click on OK endangered.

  Addendum: more information in the Microsoft Accessability tutorial.

• My vista computer hangs when I right click on the screen and scroll again.

  My vista computer hangs when I right click on the screen and scroll again.  I guess it's a problem with the windows Explorer.  I ran virus and malware scan and also led the sfc.  I always get the same result.  If anyone has faced this problem and knows the Fox please help

  It could be a problem with the shell extensions.
  Check out these links to see if they might be able to help:

  Make a right-click is slow or weird behavior caused by context menus managers

  and

  ShellExView - Shell Extension Manager for Windows

• I can say and scrolling with touchpad can not zoom in

  Samsung notebook PC series, can point and scroll with the touchpad, cannot zoom or turn

  Hello Shelly,

  1. don't you make changes to the computer before this problem?

  2. is the question confined to the touchpad?

  3. you download and install the drivers of more recent and up-to-date touchpad on the site Web of the manufacturer?

  Follow these methods.

  Method 1.

  This tutorial is designed to help you identify and fix the mouse, touchpad and keyboard problems in Windows.

  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-us/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Method 2.

  Steps to zoom.

  1 - Place two fingers on your touch pad about an inch of distance.

  2. slide your fingers on the other while maintaining contact with the surface of the touch pad. The window will zoom in.

  3-lift your fingers off the coast of the touch pad when you have reached your desired magnification.

  Steps to zoom out.

  4 - Place two fingers on the touch pad to maximum distance each.

  5. slide your fingers closer together while keeping in contact with the touchpad. The window will zoom out.

  6-lift your fingers off the coast of the touch pad when you have reached your desired result.

  Method 3.

  Press "Ctrl + Alt + right arrow" to rotate the screen and touchpad 90 degrees.

  Press 'Ctrl + Alt + arrow up' to reverse back to normal.

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• ZV5000 needs drivers touchpad with tap and scroll

  Hello! I just reinstalled XP on a HP ZV5000 laptop. The driver has been installed for the touchpad ALPS does not support tapping or scroll functions. The installed version is 1.00 as indicated on the downloads for this model, but this driver only supports the basic functions of touchpad and has no specific settings available in the section of the control panel mouse. Before the reinstall press the keys and scrolling features worked well and had specific touchpad settings. Can someone tell me please the good driver that supports these functions. Thank you!

  Hello:

  Please see if this driver does what you want it to do.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-79212-1&prodTypeId=321957&prodSeriesId=3688868

  Paul

• For Microsoft basic mouse (USB) transmissions, are there no function ' point to a window and scroll it?

  I have the following functionality with Microsoft Basic optical mouse (USB) in Win7

  I have several windows open. I'll just move the mouse pointer to a single window and scroll with scroll wheel. Then, move the pointer to another window and scroll with scroll wheel. My old mouse under win XP was to have this feature.
  Now with Microsoft Basic Optical Mouse I can click ON a window and scroll the content, click ON another window and scroll the content. But the point and scrolling is more convenient. Does someone can tell how it is possible with Microsoft Basic Optical Mouse? Or this function is not available?
  I installed Microsoft Intellipoint 8.2 and use WIn7 Ultimate.

  Hello

  You should contact the hardware support for assistance. It would be better to post the question on the link below:

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  I hope this helps!

• Problems with clicking and scrolling when you are using the mouse in IE

  Separated from this thread.

  Original title:

  Problems with clicking and scrolling when you are using the mouse

  I have the same problem.  My touchscreen responds but my touchpad and mouse are unable to save a click in IE.  I need to reboot to rectify.  It seems to be more common when the laptop comes out of fashion 'sleep'.   I tried all the steps above, everything is up-to-date.

  Hello Fred,.

  Thanks for the reply.

  I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check. Please follow these steps:

  a. press Windows + W keys, type Troubleshooting in the search box and press on Enter.
  b. click on 'show all' and then click 'hardware and devices'.
  c. click 'Next' and then follow the on-screen instructions.

  If this does not help, then use method 2.

  Method 2:
  Start your computer in safe mode and check the number.
  Refer to this article:
  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  I hope this information helps.

  Please let us know if you need more help.

  Thank you