Remote control stop scrolling left and right while he needed video first put in pause and scroll any help?

Similar Questions

• The remote control comes charged out of the box or it must first charged?

  The remote control comes charged out of the box or it must first charged?

  It is usually quite busy, mine was about 85% when he arrived. It's a question about the pre purchase or you have a problem with your remote control works not.

• Remote control does not work, and the load does not appear on Apple TV

  Hello

  I just returned from vacation and my remote seems has stopped working.   Naturally, my first assumption was that the charge was simply exhausted.

  Apparently that was the case.   He seems to have just died.

  I did pay for more than two hours and it still does not appear under devices Apple TV.

  My Apple TV 4 works very well because I use the remote control of my phone to navigate through it.

  If I understand correctly what I look at you, it seems that the remote control is same not synchronized or recognized by Apple TV more.

  Any suggestions on how to fix this?

  A reset is complete? Restart... no change.

  Thank you

  Bob

  1. Have you tried pressing the menu and the button for a few seconds while it now an inch or two away from the Apple TV, if successful, you should see a message on the screen saying the remote was paired.
  2. If you have an older remote from a previous model MacBook or Apple TV, you can use to restore the Apple TV, which, in many cases, has been sufficient to reactivate the remote Siri. You must complete all upward to undertake a restoration.
  3. If you have a USB cable - C you can try to restore by connecting it to iTunes on a computer.
  4. If you have tried all of these steps, don't have a distance sooner or a USB - C cable or their use is too inconvenient, return it to the store where purchased for a replacement, or to couple for you.

• remote control stops working

  I have a 600PC Touchsmart with TV tuner comes with a remote control to control TV channels / volume... etc.

  It worked well for about 12 months. Now, the remote control works well when the PC is first turned on, but then stops working after about 20 minutes.  Only, it works again when the PC has been activated and turn it back on.

  I replaced the batteries and the remote control - but this happens again - which leads me to think that this is a problem in the PC itself.

  This may or may not be connected, but at the same time - the wireless mouse has stopped working and I had to buy a different mouse wth a wireless transmitter, connected to a USB port and now works fine.

  Any ideas what could be the problem?

  Hello jjf23,

  To see if it solves the problem, follow these steps:

  1. "control Panel."

  2 system.

  3. "Device Manager."

  4 expand "controllers of Bus USB"

  5 right click on each of the items listed individually and select 'Properties' for each item. If there is a "power management" tab click on it. Make sure that the "allow the computer to turn off this device to save power " unchecked.

  6 click on "OK" and "restart" your computer.

  If they are not already checked, simply reply with it.

  Thank you

• You will need to plug Sony IEEE 1394 camcorder to an iMac. It would connect to the thunderbolt via an adapter port? I have a cable of firewire 800 and wanting to know how to get the video of my iMac. Thanks for any help you can give :)

  I borrowed a camcorder tape Sony that has an IEEE 1394 (ilink Sony) and eager to download video from my iMac.

  It would connect to the thunderbolt via an adapter port?

  I have a cable of firewire 800 and wanting to know how to get the video from my iMac via this cable.

  Appreciate any help you can give :)

  You want a Thunderbolt Apple FireWire adapter. Here is a link (to the US store):

  http://www.Apple.com/shop/product/MD464LL/A/Apple-Thunderbolt-to-FireWire-ADAPTE r? FNODE = 8 b & fs = f % 3Dadapter % 26fh %3 D 4595% 252B45b0

  Sorry, I don't know what software you need to play your video, once you get the cable work.

• Hello.when RIP cd media player, I can not info automatically added to the albums and titles. any help, please

  using windows 7. used to get information (artist, album, genre, tracks) of music automatically added when Ripper music CDs, but do not get more information? Any help please

  Hi George Corbett.

  ·         Did you the latest changes on the computer?

  I suggest that you run the windows media player troubleshooting tool and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

• BlackBerry Smartphones Bluetooth Remote Control stop working

  I have a new 8350i and downloaded the new 5.0.0.80 7 (?) version of the software. For some reason, left work after doing this, the ability of my headset Plantronics Voyager 815 to execute commands remotely (answer, hang up, volume, etc.). Has anyone else got a happen to them? What can I do to fix this? Thanks in advance!

  Well, I have figured this out by myself...

  Removed the battery for 5 seconds - Sprint/Nextel calls this a Soft Reboot - somehow clarified the issue with the bluetooth buttons does not.

  I wonder how many times I have to remove the battery in order to free the bugs in the system...

• Remote control - top left button?

  What does the upper left button on the IR remote control? I press and nothing happens * shrug *.

  Hi gidat

  the left button would initiate in webtop or dock HD entertainment center.

• Fingerprints and the remote control supported on Satellite P100-387

  P100-387 has a fingerprint and the remote? Please, someone answer me.
  Thank you.

  Hello

  To my knowledge, the Satellite P100-387 does not support the fingerprint reader and is not supplied with the remote control.
  But you're right.
  The fingerprints and the remote control are optional and some laptops in the P100 series support fingerprint reader and are delivered with command remotely.

  I also found this site with P100-387 material specifications:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=120514#0

• Satellite A100-756 has finger print reader and remote control?

  My notebook there finger print id? The manual says it's but I can't and also it is supposed to be a remote with it but I've not seen a.

  Does anyone have any ideas?

  I'm sure that the textbooks said that these options are available on some models. If your laptop was original packed in and you have not found remote in the box of the situation is clearer: remote is not available for your model.

  In any case, I found info on the remote control to A100-756 and there is advice: remote controller not available.

• Touchpad remote control AppleTV scrubs is no longer

  I got the new AppleTV when he can come out & the best novelty while watching videos was the ability to swipe left and right to browse content, or press the left or right edge to jump forward or backward. Now, after a SW update, edge jumps always work, but rub the work once in a blue moon. I did a factory reset and the problem persists. The remote still recognizes movements left and right because I can still navigate the home screen. If this feature has been removed or is the gesture recognition software buggy? Or could it be my simple sound defective remote? In this case while watching video content on all of the apps I've tried.

  Read and follow these instructions:

  http://help.Apple.com/AppleTV/#/atvb7944597f

  They changed the features of the last update.

• Two Apple TV - remote controls works with both at the same time

  Just bought the Apple TV 4, this means that I moved my old version 3 Apple TV in the room, when I use a distance the two Apple TV now respond. How can I connect the remote control for the Apple TV right, to keep them from harm?

  Try this:

  Désapparier money ATV3 the remote control by pressing menu and left for 6 seconds.

  Block the front ATV3 and remote peer with the ATV4 the silver medal by pressing menu and right for 5 seconds.

  Block the front ATV and press menu and the central selection button for 5 seconds

  Unlock the ATV4 and check that it does not meet the silver remote.

  Block the ATV4 and unblock the pair by pressing menu and right for 5 seconds and ATV3.

  Check the ATV3 now responds.

  Remove the block of the ATV4.

  A beer...

• I Don t see a button on the remote control to the top of the iTunes window

  I m trying to use the Remote app in my Apple Watch but I Don t see a button on the remote control to the top of the iTunes window to fit with my music library

  Hello

  The button on the remote control will appear in iTunes once you have tapped on the device to add within the Remote on Apple Watch app. Note that your computer and the watch must be connected to the same Wi - Fi network.

  In iTunes 12 and, later, the remote control button is located to the upper left, under the Volume slider. In iTunes 11 and earlier versions, the remote control is at the top right, under the search box.

  More information:

  Use Apple Watch as a remote for iTunes or Apple TV - Apple Support

• BD Playstation Bluetooth remote control does not work with Toshiba BT stack

  Hello!

  I've matched Playstation Bluetooth Sony BD remote control (model: CECHZR1E) with Windows XP SP3 (Spanish) PC last Toshiba Bluetooth Stack v.7.10.12 running.
  But if I press the buttons on the remote does not respond any personal computer.

  I have configured the battery Bluetooth to run the AV and AV service must send commands to Windows Media Player. In Windows Media Player, I have configured to use command AV Toshiba.

  If I press a button on a remote control, with he can link to PC, the icon changes color and Configuration Bluetooth appears the link has been established, but it is the interaction I get this remote control.

  Please, advice that tests should I use or do I have to install any additional software.

  Thanks in advance for your kind attention!

  Ensure that the AV remote control Service is running:
  Right mouse click on Bluetooth-> Options... system tray icon-> [general] tab: 'AV remote control Service' (must be verified)

• HP Compaq 8000 Elite SFF: Some HP Windows Media Center buttons on the remote control does not

  I have a desktop PC HP Compaq 8000 Elite SFF that I use as a home theater PC.  I'm under Windows Media Center with 2 cards tuner and antennae of the OTA.

  With this configuration, I use a HP Remote WMC.  The model No. inside the cover of the remote control battery is TSGH-IR01.  The issue I'm having with the remote control that is stationary and move forward and "back" button do nothing when you press.  The light at the top of the remote control flashes when you press those buttons, so I don't think that the buttons themselves infrared are failing.  All the other buttons on the remote work fine.

  I wonder if it is a problem of programming/software and if so, what should I do to solve this problem.   It's annoying to not be able to stop a recorded program is playing when you press the stop button, but having to use a mouse to do it instead.   Any help that can be given will be very appreciated!

  PainedByTech wrote:
  

  I have a desktop PC HP Compaq 8000 Elite SFF that I use as a home theater PC.  I'm under Windows Media Center with 2 cards tuner and antennae of the OTA.

  With this configuration, I use a HP Remote WMC.  The model No. inside the cover of the remote control battery is TSGH-IR01.  The issue I'm having with the remote control that is stationary and move forward and "back" button do nothing when you press.  The light at the top of the remote control flashes when you press those buttons, so I don't think that the buttons themselves infrared are failing.  All the other buttons on the remote work fine.

  I wonder if it is a problem of programming/software and if so, what should I do to solve this problem.   It's annoying to not be able to stop a recorded program is playing when you press the stop button, but having to use a mouse to do it instead.   Any help that can be given will be very appreciated!

  For anyone having this problem, I discovered the cause after reading a post on the forums of thegreenbutton.tv.  An application in Chrome or any browser Chrome (in my case, the Slimjet browser) is the culprit.

  For me, it was the Plex app.  He was diverting the judgment and move forward and back buttons on my remote HP WMC.  As soon as I disabled the application of Plex, the buttons started working.   Never would have guessed that this was the problem!  Hope this helps someone else who might have the same problem.  Ah, tech.  Isn't beautiful?