Mix - up of the audio subsystem

Similar Questions

• No sound - get the error no active mixer device or no audio device installed

  Original title: downloads for devices sound cards/audio/active mixers
  Hello, I got my laptop crash currently and when I came back, I have no sound except for the beeps. I can't hear CDs or audio files on different Web sites. I can livestream and see a video, but not hear. I plugged headphones and have the same results. I get the error codes are no active mixer device and there may be no audio device installed. I have a windows xp operating system. I don't know where to go to start a download for sound cards.
  Thank you.

  Miloz

  We can try to install the drivers manually. It seems that every time that your device has crashed, someone reloaded Windows without having to install the device drivers.

  Let's start by trying to install the audio driver first. This one we might have to do it manually, but the others should be automatic. This gives a test:
  1. go to: http://downloads.sourceforge.net/sevenzip/7z465.exe and download the 7zip archive manager
  2 download, register, and install the utility on your computer
  3. once the utility installed, go ahead and re - download the audio driver package
  4. save the package on your desktop (or somewhere easy to access)
  5. once the package downloaded, find him, do a right click and choose "extract here...". "or something similar in nature. Basically we will extract the contents of the package and install it manually
  6. once the content is extracted, click START
  7. in the menu START, right-click on "Computer" and choose "Properties".
  8. in the upper left corner, click on Device Manager.
  9. find your Multimedia Audio Controller, right click and select 'Update Driver'... »
  10. click on "Browse my computer for driver software".
  11. click on the button 'Browse' at the top
  12. place where are the files extracted from this driver package
  13. Browse in the folder extracted and select the listed file. If there are several of those who choose an and and if it's just, the Setup will continue. If this is not the case, the installation program displays and error and then you just go back and try the alternate
  14. from there, the installer should walk you on the rest of the steps to manually install the driver package
  As far as your other drivers go, I would recommend going to the bridge site and looking for a driver of Modem for your computer model. The audio driver should be supported at this stage, and the Ethernet driver can be a joint wireless adapter you have. You may need to find a driver for it on the site of the gateway, OR if you bought the adapter you need to go to the device manufacturer's Web site and get you a driver there.
  Let us know what happens
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The audio of my mixer in hearing is MUCH too low. Help please

  Hi all

  I started my trip in the recording of podcasts and hearing, that's what I always use to work with the audio, and I intend to continue my adventure of podcasting. However, when you make records, I've known some frustration with the low entry levels I have seem to be and I am not competent enough to correct the problem. I'm sure it's something simple. Here is my configuration:

  -First of all, I run mixer Mackie FX8 Pro. When I use a microphone, it's a Heil PR40 (just acquired, I'm rather happy haha). I throw this flexibility, the ease of doing the Mix Minus audio configurations of type, etc.

  -The card is connected to my macbook pro via a 1/4 "adapter USB

  -Hearing recognized then as standard USB audio interface, and all my other controls are made by the Board of Directors, as it should

  Now my problem is that the sound is in hearing is SO low. Of course, I'm not SUPER familiar with the use of mixing tips, but I know you're not supposed to just all get like that also pick up too much noise etc. and distort things. But I mean, the waveform bars barely move. They are tiny. And when I amplify the volume, the noise becomes too loud too properly deleted in post.

  Can someone give me clues as to what I can hurt? Do I need mic inline amplifiers? Should I check the map, what should I check on the Macbook? I'm quite frustrated and you want to go about it, and I got a lot of amazing assistance from these forums, I wanted to check with you the people first.

  I thank you very much in advance for your suggestions, you can provide.

  Kyle

  Hey I just wanted to give everyone an update I solved the problem, or rather, to understand the question.

  It turns out that the Council that I use is a little power for a microphone as the Heil, so I actually get a Mic Preamp processor for my setup. When I use a different microphone like a Shure SM58, everything was fine. If this issue is resolved (after talking with support Mackie).

  Thanks for all your help.

• I get one its Robotics on some of the audio files that I incorporate into multitrack mixing.  That gives a particular file.

  I get one its Robotics on some of the audio files that I incorporate into multitrack mixing.  That gives a particular file.

  Well, the first thing I'd do is listen to the file in waveform (double-click the file and it will take you there) and see if the file itself looks funny.  If it is clean in the waveform, and then make sure that you do not accidentally have some effects activated in the rack of effects for this track.

• Can I copy the levels of the Audio Track mixer to a new sequence?

  I have a complete sequence ready to export with the dialogue, music, etc. all set correctly in the mixing of Audio tracks. I need to create an identical version of the task from another language is connected. Is it possible to copy on these levels I put from the first footage, so I don't have to manually adjust all again one by one?

  Duplicate the sequence and replace the audio clips.

• Mixer volume for the speaker shows controls a device called a name is not not available and generates internet audio randome at startup.

  No visual source audio stream, does appear, that sounds like a TV to the scan mode.  I can turn off the audio controls, but it restarts everytime I turn on the computer.  I can't find anything at the start that I can identify as the culprit.  Also, it stops if I disconnect from the internet.  I have a FIOS internet DSL and a wireless router.  This just started happening a few days ago.  System Restore does not resolve it.

  Hi William,.

  1 do you have the new Windows updates recently?

  2. were there any changes (hardware or software) to the computer before the show?

  The problem can occur if the sound card drivers are not updated. It can also occur if there is malware present on the computer.

  Method 1: Update sound drivers and check if it helps.

  Update a hardware driver that is not working properly(Windows 7)

  Method 2: use the Microsoft Safety Scanner in full scan mode and to remove all the threats that is not detected by it and see if the problem persists.

  Microsoft safety scanner

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Please make a backup of all the data to an external hard drive before performing a scan because it might cause data loss.

  Note: do see you this device in the Device Manager, in the affirmative, then right-click on it and uninstall it and see if it works.

  Answer please if you have any questions.

• Mixing down don't capture all of the audio tracks? AA (CS6)

  Hello everyone, I have a little a problem involving the mixdowns.

  I recorded 7 tracks of guitar and bass have-guitar 1 track and 1 drum Playback in audition for a total of 9 titles.  I'm ready for the final mix, but when I do the final mix resulting is not one of my songs on guitar and contains only the bass and the drum playbacks.  In multitrack mode if I cut the main track, I can still hear my songs of 7 guitar, but the bass and drums tracks go silent.  Y at - there a step I'm missing somewhere along the line?

  It seems that if you have your tracks of guitar, exit track is set to output to the physical device and do not appear in the master.  Final mix includes only the titles assigned to the master output.  In each following Panel, change the fall output down to master and you should be set.

• How can I map a keyboard shortcut for the reacord button in the Audio Mixer Panel?

  I was recording voiceovers in first Pro CS5 for awhile, but I would like to improve my workflow. Whenever I record take, I first press the record button (labeled B below) with the mouse and press SPACEBAR on the game with the shortcut key button. After I record audio, I hit Stop and this activates / deactivates the record off the power button at the same time. I have to then click the record button with the mouse to start the process again.

  Is it possible to map a keyboard shortcut for the record button in the audio panel so that I don't have to touch the mouse during recording of voice?

  

  There is not currently a shortcut for this. This is a good feature request, if. You can submit requests for features here.

• How to select the audio language in the Quicktime format.

  as title, I have couple of the film which have an audio language 2 when I play on Quicktime it mix together 2 audio.

  can I know how can I do to select the main audio language?

  Hi nothing Jack,.

  I understand that you are not able to choose which audio track plays for your Quicktime movies. I know it's important to understand the language in your videos, so I'm happy to provide some clarification for this.

  When you watch a video in Quicktime format, use the menu bar to select view > languages. From here, you can choose which you do not want to use the audio track.

  Thank you for using communities of Apple Support, cheers!

• all of a sudden the audio to youtube does not work? OK but in IE

  all of a sudden when I play a YouTube video of the audio does not work. Works fine in Internet Explorer.

  Did you also check the plugin-container parameter in the Volume mixer?

  You will see Firefox or plugin-container in the mixer volume if you're on a Web site that is running a media (audio) file.

  See also:

  • https://support.Mozilla.com/kb/no+sound+in+Firefox

• To access the Advanced Audio settings in the Audio Panel

  Greetings,

  I have an old sound mix of a movie (with 5.1 sound), but I think that in some places the LFE channel has no sound.

  I would like to send low frequencies (in these specific areas... where there is dance music) to the LFE channel.

  How can I accomplish this?

  FCP X documentation speaks of a 'LFE Balance"in the Audio Panel setting advanced Inspector.

  However, I don't see this setting when I open the Film Clip. I've attached what I see as a snapshot of the Image.

  Thanks in advance for your answer.

  Tiya

  My FCP X Inspector appears in the form:

  

  The mixer you are looking for is under the panoramic Mode menu (default: no). Drop down the menu and choose a Surround option and then dial the triangle pointing downwards:

  

  All these parameters are keyframable (even the control on the screen of the "panoramic" center - when you hover over the pan area, you will see an icon of small diamonds appear in the upper right of the region.)

• No sound from my computer. I installed the drivers. in the audio preferences, it says "no audio device".

  I have three sound devices: my soundblaster PCI motherboard built in audio (realtek HD audio), and my graphics Nvidia card (via HDMI).

  I installed the drivers for the soundblaster and graphics card. I tried allowing both at the time and only one at a time. not appear as selectable "audio devices" in the audio preferences, but they appear under the "hardware" tab when I activated, I did it has been set to use the mixer for the device.

  When I had to install the realtek driver, the sound test in the driver software would play the sound. but he would not always recognize all audio devices.

  Probably missing me something simple.

  Hello

  
  I suggest you to uninstall all the audio drivers from the computer.
  a. click Start , and then click RUN.
  b. in the RUN line, type devmgmt.msc , and then on enter.
  c. This will open the Device Manager window.
  d. Browse sound, video and game controllers.
  e. right click on each of the drivers see you, and then click Uninstall.
  f. you may asked to delete the driver completely. Please, put a checkmark and complete uninstallation.
  g. restart the computer so that the changes are applied.
  After the reboot, I suggest you to download the audio drivers from the computer manufacturer's website and install the same.
  Restart the computer and then install the drivers for other audio devices
  It will be useful.

• No idea about the audio. Don't know if I have a card installed or not, do I need speakers?

  Windows XP purchased used, refurbished.  Sound Max Digital Audio is what happens in the default device.  But nothing happens.  Please, someone help me!

  Yes, you have a sound card.

  You should not have speakers.

  Lets check to see if you have a driver for your card its installed.

  Make a right click my computer in the start menu, and then click Properties.

  Click the Hardware tab, click Device Manager.

  Click on the + sign next to sound, video and game to extend, if any controllers.

  If there is a yellow mark next to the Audio Digital of the Max Sound, you need a driver.

  Even if not, there is a yellow mark to do this:

  Connect to the Internet.

  Right-click on Audio Digital Sound Max and click on update driver, follow the instructions.

  I hope that everything is fine and if it is or not allows to check your settings.

  Go to: Control Panel, sounds and Audio devices, Volume, the volume of the device tab, click Advanced.

  In the menu, click Options, click Properties, device mixer, Audio Digital Sound Max.

  With playback button put a check mark in all the fields below.

  Activate the record button and tick all the boxes.

  Click playback again, click OK.

  Drag the control to the wave upward, all others are ok at halfway.

  Close the Volume Control Page.

  Click on the Audio tab, audio playback, Audio Digital Sound Max.

  Click the voice, the voice reading, Audio Digital Sound Max.

  Click on apply, OK

  Let us know!

• I tried to record some live audio. I downloaded Wondershare Streaming Audio Recorder I opened the program - but could not hear the audio I tried to play.

  original title: sound problems

  Hello!

  I tried to record some live audio. I downloaded

  Wondershare Streaming Audio Recorder

  I opened the program - but could not hear the audio that I tried to play. I don't know if downloading this program is related to the problem.
  I opened Skype - and everything worked fine. I could hear, etc. But if I run an MP3 in Windows Media Player - I hear nothing!
  My sound is at the top.
  In my Volume mixer, I see:
  1 output device digital (SPDIF) bounce up and down. (but I don't)
  2 but applications: sounds of Windows, Windows Media Player and Google Chrome will not move. (but they are at the top).
  Any suggestions?
  Jews

  I managed to get the results of work. I don't know where come the SPDIF.

  I downloaded a new driver Realtek for audio from the computer. This corrects the problem.
  But I still want to know what happened.

• Strange behavior of audio subsystem after update Dev Alpha 10 to 10.0.9.388

  Hello world!

  Has anyone noticed a strange behavior of the behavior of 10.0.9.388 audio subsystem firmware. Recently, after firmware update Dev Alpha 10 to 10.0.9.388 subsystem audio misbehavies in the following way:

  (1) if the external headphones/speakers connected to the audio line-out looks to be preprocessed by low-pass filter and surround effect. The device reported by AudioManager is/dev/snd/pcmPrefferedp. Would it be a bug in formware and re-routing audio internal speaker to the line-out socket did not exclude specific pre-treatment?

  (2) on the previous firmwares if audio goes out of the internal speaker and then the helmet is connected to Jack line out change of itinerary was seemlesly happening and he kept playing with headphones without additional measures in the application. Now, peripheral audio is not consume audio samples and so crashes until it is closed and reopened.

  On the previous firmwares were not all the problems of this kind. Would be - what a few unlucky flashing firmware try (if it is still possible) or bug of 10.0.9.388.

  It will be good to hear comments & thoughts about these questions.

  Best regards

  Dmitry.

  I suggest to create two entries Issue Tracker: https://www.blackberry.com/jira