Mixture of American and European paper sizes

Similar Questions

• HP OfficeJet 8600 and Custom paper sizes

  I have a HP OfficeJet 8600 for 2 years now, and I've never had a problem with it until today.

  I bought a few cards with inserts that I can print on, however, because it is a custom size, I can't print on it. The printer has no option to set a custom paper size.

  So, I do the obvious thing and Google a solution. The firmware update I read... no luck. The update utility can't find my printer on the network even if I print it to 3 different computers, and I can browse his IP in Chrome and check the Web page.

  Try a different driver (Win 64-bit 8.1)... the steps that I follow do not work, and when I get them to work, there is nothing different.

  I tried to do on my MacBook Pro too, but I can not do anything there either.

  Totally ridiculous, which releases a product with this MASSIVE floor!

  I am very angry that now I have to put it back write more than 100 of these cards

  So I found out how to check the updates of the printer itself, and I have updated firmware, so that rules out.

• HP Officejet 7610 Wide Format e-all-in-one does not copy settings B4 paper size option.

  I want to copy documents B4, but there only automatic, A4, 4 x 6, 5 x 7 inch, 8 x 10 inch, ledger and A3 paper size. How can I configure to B4 or another paper size? or it will automatically select the paper size according to the documents when I choose the automatic paper size?

  So far there is no attempt to HP to fix this, not even an update for any improvement. However, I have something to activate the copy B4. I notice that the printer has check the size of the paper by detecting the right edge of the paper. So, the trick is:
  1 adjusts the A3 size paper tray
  2. the B4 paper near the right side of the status bar of the places
  3 place some items including the flat surface to the left space to control the paper jam avoiding paper movement.

• HP 7610 Grand Format: A multifunction HP 7610 Machine large Format will accept A4 and A3 paper

  A multifunction HP 7610 Machine Wide Format will accept A4 and A3 paper because I'm looking for one that does both and the HP brochure does not.

  If this isn't the case, you know a multifunction HP inkjet machine that will do both?

  Hi @amen423,

  I have read your message and see that you would like to know if the printer supports printing on A4 and A3 paper sizes. I want to help you.

  Yes, the printer supports for printing on A4 and A3 paper.

  I've included a document for the specifications of the printer, you can have a look at.

  Specifications for the e-all-in-one series HP Officejet 7610 and 7612 large size (H912).

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• What new photoquality garlic in those support paper size in the printer driver?

  I have a new HP Photosmart AIO 7510.  Much to my surprise the printer driver does not support create 6.5X10 inches, 5.5X8.5 inches for card stock for example custom paper sizes.  I used to have this feature in my old HP Photosmart 5150C all-in-one.  My PC is Windows 7 Edition home premium, SP1 operating system.

  Is anyone know 1. What new models - printer or in a single - support a photo quality printing and custom paper sizes?  Am open to return my current template and replace it with a new model of HP.  Or with Canon, Epson. anything that works to regain this ability.

  or 2.  is there another driver that is compatible with the 7510 which will create custom paper sizes and quality photo printing.

  You can use customized with the 7510 paper sizes, but you must use another driver to do it. Follow the steps in the post below the link for your operating system. With the help of the other driver should get the custom print size to work. Hope that helps.

  How to assign other print in different Versions of Windows drivers:
  http://goo.GL/zCk2r

• Acrobat 9 Standard lack of paper sizes.

  I recently had Acrobat 9 Standard installed on my work computer.  Previously, I had CS4 with Acrobat Pro installed but had to transfer the license to a colleague.  I am now frustrated because all page sizes I use generally disappeared.  Fo all sizes Arch and Ansi are missing.  In the Printing Preferences dialog box I tried to add a new page called arch E1 size and I got an error saying "not authorized to change the system, or the defined printer paper size (Arch E1).  Only user-defined paper size can be modified or deleted. "Apparently, acrobat knows that Arch E1 is a standard paper size, but its not available in the selection of paper size menu.  I can go and do a lot of new custom paper sizes and give them alternative names, but it's a bit frustrating to have to go through and set up my own paper sizes when Acrobat already knows that they exist.  I guess my question is how can I get Acrobat 9 Standard to view the Ark and Ansi paper sizes?

  Unfortunately, this is only available when you use the Pro. version of Acrobat.

• Officejet4630: Newly purchased - when and where can I select paper size

  I just bought this printer and I am in the middle of the whole upward and don't know how far I can progress, cartridges are installed here my problem, I am currently in France, my IP address shows that, but I chose English my language UK or US, some U.S., the question is should I I selected UK - the printer will fix automatically by his IP address for paper A4 or because I selected American English will be Expected 8 1/2 x 11 for overall upward? I've been using 8 1/2 x 11 that I brought an American purchased printer with me, but he stopped working last week and had to be replaced, and the other bought at office Depot. I need to know before you load the paper tray, and there is NO phone number or even a live chat to contact.

  Hello @SHCand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have problems paper selection.  I will try to help!

  I recommend you to perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also suggest this document:

  Printer is configured to use the wrong paper size

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Printing without margins and paper size selection

  I just bought the HP Photosmart 7510 (C311a) SN: {removed privacy}, I can't get an impression totally without borders.  I always find myself with a slight edge, and at the time that the photo is cropped.   Also, I had a 3210 that has all kinds of paper sizes availablen, now with the 7510 I seem to have less of a selection and more than 50% of those who have a yellow triangle next to it, which indicates, to me, there is some sort of error.

  Hi thenetrider,

  Follow the steps outlined in the document below to reduce the cropping of photos.

  How the printer cut and crops images to print borderless photos

• HP Laserjet M401A: HP Laserjet M401A not will mark the different paper size and tray on the printer properties

  Hello all.

  I have a custom paper size in question and the plateau in the properties of this printer.

  I would like to implement three different printers on the same port, to print directly on a specific tray (without going into the properties of the printer and select the appropriate tray and size).

  I have this printer with the additional third tray.

  I implemented the A4 in the Tray 1 (bypass), a custom size in tray 2 and 3 on the printer.

  When I enter the printer PROPERTIES I want to set up the paper size in tray 2 and 3 value. No question.

  The only sizes I see is 13 x 8, a4, a5, letter, legal and so on (there are choices may 7).

  So, I choose NON SPECIFIC.

  When I go to printer PREFERENCES, I can set up my custom paper size.

  But when I choose my custom paper size, tray 2 and 3 go away and I can choose only bypass or Tray 1.

  If I attributed to A5 (for example) the tray 2 and 3 re - appear.

  How is that possible? where I'm wrong?

  Thank you very much, any help would be appreciated.

  See you soon,.

  Luca.

  Hi Luca,

  That is expected, custom paper sizes are supported only on tray 1.

  Tray 2 and 3 are supported specific sizes of paper.

  You my find graphics of the following as a reference, it lists a paaper supported size for each tray:

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5096252&docid=emr_na-c03303423&docLocale=en_US

  Kind regards

  Shlomi

• HP 4520: Eprint and all in a print module won't let me pick the paper size I want to print 5 x 7

  EPrint and all in a print module doesn't let me choose 5 x 7.

  Hello

  Are you referring to the eprint & all in one apps for android?

  Please make sure you have the right selected and that all other paper size and paper type settings are correct.

  Another option is to download the plugin from HP for android (you must also enable it in Settings download afte) and try to print that way. Once downloaded and activated, you should have the ability to print photos directly without going through the applications.

• Paper size and locked type

  I have a 5530 send HP printer that I use with my windows operating system 7, via e-print.  Scanning works very well, printing works fine on standard 8 1/2 X 11 paper, but when I tried to print photos on HP 4 X 6 photo paper, all options to change the paper size and type display a padlock icon and I don't know how to unlock them.

  Hello

  I have no Corel, but for Photoshop CS6, I can see many formats of paper available. Please try:

  b click Print (or Ctrl + P).

  (b) click on 'print settings ',.

  c select Photo printing & paper...

  d click on "Paper/quality" tab

  (e) click on advanced.

  You should see a list of several sizes, some are locked (no support) similar to:

  

  If you could not see as above the list, I think you need to re - install the drivers and software.

  Kind regards.

• HP 9500 win 7 custom paper size tray 1

  I have 12 x 18 paper loaded in Tray 1.  The control panel is correctly set.  Our office has a mixture of windows and Mac and have always been able to print on paper 12 x 18, in the #1 tray.  I recently bought a new computer running Win 7 64 bit.  The driver "HP Color LaserJet 9500 PCL 6" of windows does not support custom paper sizes.  I tried to create forms under the print server properties, but custom sizes do not appear when I'm in my applications.  5 PCL and PCL 6 UPD pilots paper 12 x 18 in option, but when I use these drivers of the printer fails to pull the good paper from Tray 1.  With Acrobat, it defaults to 8-1/2 x 11 paper and prints a second sheet indicating:

  PCL XL error

  Subsystem: VECTOR

  WARNING: IllegalMediaSize

  With AutoCad, using the UPD and printing on paper 12 x 18, control panels flashes and asks me to load the A3 paper into Tray #1.  Change the size of the margin in my application doesn't seem to help.

  I'm an architect and paper 12 x 18 is essential.  Thanks in advance.

  After exhausting any permutation of the driver options, I reluctantly installed the PostScript of the UPD driver.  Problem solved!  Printing on paper 12 x 18 in Tray 1 works perfectly.  There is clearly a problem with the UPD PCL5 and PCL6 drivers.

• paper size for setting

  I try to print my reading list for a case.  What is the paper size in the page layout?

  I would use a model of the Avery collection. You should be able to find their online model number and then you can get the dimensions it. It is the easiest.

• Unable to set the paper size at all when using Firefox built-in PDF Viewer

  I use the built-in Firefox pdf viewer and it's fab.

  But if I try to print, I go to the preview before print and go through the layout and it is useless, because it assumes that my book is almost SQUARE, and the only options I have are portrait and landscape. I use A4 paper, like most of the British and European.

  Of course, I can't work around the preview before printing or that it ends up in the wrong settings by default.

  Adjust (default), it is only based on the width (if I set the margins to zero - it's okay), but lacks the lower half of the page because Firefox think my paper is the PLACE for a reason any.

  The only thing that works is to set the zoom to print at 60% and have tiny everthing, which is ridiculous.

  Any ideas? Is it possible to manually set the width and height of the paper?

  Thanks if anyone can help with this - my alternative is to use the Toshiba reader of PDF files, and it prints terribly to be unreadable. The print quality on Firefox is fine, if I could get to fit on paper...

  Hmm, in your screenshots, why mention the title bar of the window Yahoo mail? Is it an attachment that is somehow embedded in the message? If so, can you find a way to see it in its own tab? Sometimes with the right button > setting > Open Frame in a new tab will do, but I did not open Yahoo Mail to experiment.

• Change paper size problem

  Hello. I am writing from Japan.

  My question is about printing.
  I mainly use A4 size paper, but sometimes use B5.
  B5 is a paper based on Japanese traditional paper format.
  The A4 is now major in the Japan, B5 is always used
  and I sometimes print with paper B5 and bind to the B5 file.
  B5 is smaller than the A4, but size 1: 1.4 ratio the same as A4.

  Now, the problem is:
  "Although I change the paper size of the preview window,
  the change will be not taken into account immediately
  and I have to print at least one page with the old settings to set the change. »

  I am so happy if solve you this problem. It'll be more useful.
  Or, you can tell me another good solution or how to change the settings?

  Thank you very much.

  Use the {Ctrl + P} keyboard command for printing, in order to circumvent the preview before printing.

  Bug 1007779 has been filed on the button print, preview printing opening rather then goes directly to the print dialog box.