Switch-on-a-stick.

Similar Questions

• Question about upgrading Ram on a Satellite Pro A200

  I want to buy an internal memory of my A200 Satellite Pro Mod no, PSAE1E, but I can't find my model in the drop-down lists, what memory do I need, I want to switch using two sticks of 1 GB memory, at the present time, I have two sticks of 512 MB installed.

  Hello

  Compatible modules are: * DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM *.

  As far as I know all the A200 series laptops can evolve until * 2 GB *.

  This means that a memory would support module of RAM 1 GB max.

  As the previous user have already said, the Kingston modules are not bad.

  I also use it in my book and so far, the modules are ok.

  See you soon

• Acer Aspire v5 573g compatible hardware

  I've had this laptop in 2014 and he gave me hell at first, then it worked, then during the transition to the w10, he gave more hell. Fast forward to 2016, I your desktop appropriate because frankly I couldn't count on the laptop more curiously it is performed without a hitch for a while now.

  Anyway, I opened it and turned on the HDD (1 TB WD slim) for one SSD, and I thought of switching on the stick of ram to 4 GB for a 8 GB one and maybe the Ondaaah (AR5BWB222) for an Intel (Intel Dual Band Wireless-AC 7260 HMC Rev.2) one.

  My question is this, can I replace the RAM for any PC12800/1600 MHz SO-DIMM DDR3L CL11 1, 35v stick? or should it be acer approved those? (which seem to be significantly more expensive).

  Is there a list of hardware compatible with the laptop? I want to give it a new life, if possible. Anyway, thanks in advance!

  Hi calbruc,

  Aspire V5 - 573G has only a single memory and 4 GB soldered on the motherboard. Speccy shows probably these 4 GB as a free slot. You should check with CPU-Z version zipped (without installation). It will give you the right result: 8 + 4 and no free slot.

• Notice of solicitation - Stick with Yosemite, or switch to El Capitan?

  I hesitate to upgrade to OS El Capitan, because I don't want to open the door to potential problems.  Want advice from people here.  Why should I switch/why should I not pass.  Thank you.

  There is a school of thought, 'if it ain't broke, don't fix it. " It certainly could have problems if any software you are running is not compatible with OSX 10.11.x but it's true for every update. I run OSX 10.11.x on all of my Macs.

• Tips for creating of digital advertising. Which platform? Stick with PS GIFs or switch to HTML5?

  I have been creating static ads for Google AdWords etc for a while but I would begin to create animated pools. Show ads of beautiful movement, that are not video, but I don't know how to go about creating them. Should I use Dreamweaver to create HTML files, Adobe animate... I don't know even where to start.

  I used Photoshop to create animated Gifs, but they eventually pixelated. I want one Announces sharp and bright eyes that allows to move the text and images. So, I would be so grateful for any idea or any recommendation tutorial.

  Thank you!

  Google supports HTML5/SVG/CSS 3D transformations.  But they will cease to accept Flash/SWF ads soon. See the link below for help:

  Update your ads Flash to HTML5 ads - AdWords Help Center

  Animate CC (formerly Flash Pro) can get out to HTML5 or SVG animations.

• My Apple Smart Keyboard (Azerty) switches to Qwerty when I select the UK English keyboard

  I bought an iPad Pro 9'7 and until yesterday, I have not used the Smart Apple, that the native Apple keyboard keyboard in IOS. I'm leaving in a country speaking French, so I'm used to the QWERTY keyboard, and the Smart QWERTY keyboard did not yet, until recently. I just bought my Smart Keyboard QWERTY, which is now available. I run immediately in the keyboard configuration problems.

  With the native IOS software keyboard, I installed 3 keyboards: French, Dutch and English British and I've set up Dutch and British English for QWERTY. It has worked well. I was able to take advantage of the spell checking in all languages, while keeping the AZERTY keyboard layout. I am constantly moving between these languages, while it was important for me to be able to switch between languages, while keeping the Azerty layout

  On my new Smart Azerty keyboard, I can easily switch between languages using the button 'globe' on the left side of the keyboard, but as soon as I switch to British English or Dutch, the keyboard will automatically switch to the Qwerty. I checked my settings of the iPad has not changed: Dutch and English British are always set to Azerty. If I'm getting confused now.

  Of course, I could stick the french language as a framework for my keyboard, the smart keyboard would retain its built in QWERTY layout, but I would miss the spell check option.

  Any suspicion, the solution or work around it?

  Simply set French as the physical keyboard for English and Dutch in settings > general > keyboard > hardware keyboards.

• Some iPhoto albums appear empty with no sticker and say '0' when I fly over the album, but the photos are there when I double click.

  To start, I read in countless discussions here on iPhoto glitches and patches, so I hope I'm not repeating this question, but I couldn't find the answer anywhere I had a question after question with iPhoto (mainly around several accidents after organizing photos into albums that made the album organization and this issue I describe below) and is considering moving to Adobe Bridge just to have a reliable place to store my photos without worrying about the constant pain. I realize that no program is immune to glitches, but the volume and the frequency that I've had with iPhoto is unmatched (which led me to wonder if it is just a user error, but I honestly can't understand for the life of me). So I describe my current number below, in the hope of resolving the issue so that either A. I can fix and give iPhoto a chance more or B can I ensure that my photos are safe and intact before transfer to another program.

  Some of my iPhoto albums appear empty with no sticker and say '0' when I fly over the album, but the photos are there when I open the album. I have rebuilt the thumbnails, and it has not solved the problem. After the other issues that I had with iPhoto crashes, I made sure that all updates have been installed. Unfortunately, I don't remember if I've rebuilt or repaired the database, but it seems that all my photos are present, all mixed together and some showing in the albums 'empty '. Here's my question: is one problem, other than being boring? And should I switch to another program, or have I missed something?

  A few details:

  • I have rebuilt thumbnails today and it took 5.5 hours. It seems completing without problem, but has not solved the problem.

  • I have my computer fully backed up on an external drive to Seagate drive as Mac OS extended (journaled) as well as iPhoto backed up separately on the drive as well.

  • Looks like I have a "library" and "alias."

  • I use iPhoto to organize my photos. I use Photoshop to edit. I love the feel of iPhoto, but I lost hours and hours trying to organize and solve problems.

  • I use iPhoto 11 version 9.4.3 OSX 10.8.5 / / MacBook Pro processor 2.9 GHz Intel Core i7 Memory 8 GB 1600 MHz DDR3

  More worrying is the issue of the repeated questions. How you use iPhoto and Photoshop together?

  Tabula Rasa:

  Download iPhoto Library Manager and use its function of reconstruction. (In early versions of the Library Manager, this is the file-> control Rebuild. In versions later it is under the menu library.)

  This will create a completely new library. It will then copy (or try) your photos and all associated metadata and versions to this library and as close as possible to what you had in the damaged library fix it. It does this based on the information it finds in the iPhoto sharing mechanism - but it means that things not shared won't be there, so no slide shows, books or calendars, for example - but it should recover all your events, albums and keywords, faces and places.

  Because this process creates a completely new library and does not change your old, it is non-destructive, and if you are not satisfied with the result, you can simply go back to your old.

• No switch wireless on Satellite Pro A60

  I just bought (second hand) a satellite pro A60EN PSA65E 01HOOU8K model number. There is just a cavity where the wireless communication switch should be. Does this mean that I can't use a wireless router?

  Hi David

  Some of the Satellite Pro A60 was delivered with a minPCI wireless network card and some do not support the WLan functionality.
  It seems that you have one that does not support the WLan. This is why you must use an external solution such as WLan USB stick

• Re: Error in reading Memory Stick Pro Duo

  Hello
  I have Toshiba A200 - 1 M 4
  When I insert the Memory Stick Duo Pro (with the help of the Memory Stick Duo adapter), I get this error message from Windows Vista:
  {color: #ff0000} * you must format the disk into G: drive before you can use it.*
  * You want to format? * {color}

  I put the same card in an another (NOT of Toshiba laptop) and it could read as well.
  And I do not have problems in playback of SD, but just Memory Stick Pro Duo memory cards.
  So what's the problem?
  Please help me
  Thank you

  Hello

  I think that it always useful to take a look in the user manual for additional information on the laptop. :)

  The said Memory Stick user manual * PRO Duo * and Memory Stick * Duo cards or adapters are not compatible with the Satellite A200 series multiple digital media card slot!

  So you will not be able to use this card.
  You'll need to switch to a card that is picked up and compatible with the multiple digital media card slot.

  Best regads

• LifeDrive power switch broken switch

  Help.  My Lifedrive is 4 years old and has worked well for the old technology.  However, the power switch broke.  In other words, it slips easily rather than move the on/off switch and does not have the power or not.  The last position has been LOCKED.  So I can't enter the data.  A soft reset brings to the top of the screen, but the screen has half shaded numbers and does not recongize being touched or tapped.  There seems to be nothing that works.  A hard reset is not possible because the on/off switch does not work.  Most of my data is synced with my computer.  But I did an interview with oral history and voice Memos do not sync for palm desktop.  So my questions are: 1) does anyone know how to activate a locked Lifedrive with a broken switch for power on / off?  (2) someone knows how to retrieve voice memos to a unit in this condition? (3) does anyone know how to fix a switch broke on a palmOne Lifedrive?  Really hope someone can help.

  

  This is what it looks like after removing the plastic shell.  The piezoelectric speaker is attached to the plastic shell.

  

  Disconnect the battery from the motherboard.  I use a small Flathead screwdriver to separate the connectors softly.

  

  Remove the battery disconnected.

  Write it now, numbers 1 to 4 on the pieces of blue plastic that supports the microdrive; in this way, you won't get lost as all back you together.

  

  The microdrive is connected to the interface of CF. There is a sticker of warning placed on the lower part of the microdrive and interface see cut carefully through the sticker between the CF card and the microdrive with the tip of the knife.  Gently, remove the microdrive from the CF interface with a flat head screw metal or equivalent.

  
  Now the microdrive (in my case, a memory of 32 GB compact flash) is half disconnected from the interface CF.  Continue, making sure not to damage the delicate pins.

  

  Congratulations!  Completely unplugged.

  

  Remove the microdrive (or CF memory).

  

  Disconnect the cable of the microphone of the motherboard in the same way you did to speaker wires.

  

  Unplug the connector for cable film gently with a plastic or equivalent flat head screw.

  You don't want to have cables delicate film cut by accident, so be careful.

  

  Unplug the connector for a another movie cable gently with a plastic or equivalent flat head screw.

  

  Remove the two very short torx screws.

  

  Finally, the motherboard is thrown, and you can see what happened to the switch.

  

  The central internal switch at the top of the motherboard has proved to be in the locked position.

  

  One of the two legs of the plastic piece was found to be broken.  The other leg looked ok.

  

  I slipped inside switch to the unlocked position manually.

  

  Another picture of the internal switch.  If the internal switch turns out to be broken, refer to

  http://1src.com/forums/printthread.php?t=121887 and order a new switch from Mouser Electronics, www.mouser.com
  Part number: 688-SSSS7A0101
  Manufacturer part number: SSSS7A0101
  DESC: SP3T W / BACK WINDOWS
  Switches slide ALPS SMD
  RoHS: compatible

  I think that your internal switch is not broken.

  

  Put the motherboard back such as the plastic piece can slide the internal switch to turn on or off position.  Be careful not to break the other leg healthy in this process!

  Put everything back together carefully.  You start your Lifedrive, you will notice that the date and time are the default, put it so well.   Good luck to you!

• OK to mix 'of connection to the switch"and"close relay switch?

  Hi all

  I'm developing a test sequence using the card multiplexer 2527 to the track signals.  To configure the card, I use DAQmx switch functions.  In my application, I have a Subvi routine that imports the data from a spreadsheet Setup and run a loop for to set the configuration for each step (each iteration of the loop contains the channel for 2527 card information).  The topology is set on the first iteration, as well as the configuration of the path to the first string.

  My concern is this: I need to close the extra channels/relays without changing the topology or resetting the device.  In the first round, I use "connection to the switch" function to set the initial path, (ch0 to com0 for example).  Then in subsequent iterations of the loop, I use "Relay close switch" function to close the additional channels individually (for example k2).  In the end, when the measure is taken, both ch0 ch2 must be closed and routed to com0.  This implementation is so sure, or am I somehow to make the adjustments to the initial loop?

  I would like to test this with the hardware, but it is not yet available.

  Also, I realize that I could use independent topology and configure all relays individually for each step, but I hope that my approach will be easier and safer.

  Please notify.  Thank you.

  GSinMN

  Hello GSinMN,

  It's OK to mix 'of connection to the switch"and"Close relay switch"If you understand what's happening below. "Switch Connect" connects two channels by closing a path of relay between the channels, then "Close relay switch" can be used to change the State of the individual relays. If you are not careful you can mess up your connection by activating / deactivating relays that are part of the route connecting your channels.

  "Also, I realize that I could use independent topology and configure all relays individually for each step, but I hope that my approach will be easier and safer."

  I would recommend the topology independent if you want to stick with connections to channels only. http://zone.NI.com/reference/en-XX/help/375472G-01/switch/2527_independent/

  Initial connection:

  CH0-> pcom0

  pcom0plus-> icom0plus

  pcom0minus-> icom0minus

  icom0-> com0

  In each future iteration just connect to the next to pcom0 channel (which will be indirectly connect it to com0):

  CH1-> pcom0

  CH2-> pcom0

  ...

  ...

  Jarrod

• Y460 not GPU switch

  Hello world

  I just bought my Y460 yesterday March 4, 2011 and I discovered that he is not a GPU switch on the front of the laptop. I'm sure of it, because there is only the media card slot and switch wireless, nothing else. I can't change the graphics by right-clicking the desktop because it "configure switchable graphics' option was not available. Is it a fault or is it just that new Y460 doesn't have this option? (in addition, there is a NVIDIA sticker next to the touchpad).

  Any suggestions are appreciated.

  Hello mate,

  It is probably because your Y460 is not equipped with switchable graphics.

• Acer Aspire switch 10 - Boot USB / Windows 8.1 installation of USB

  Hello
  I recently bought Switch 10. As it has only 32 GB SSD cut into 24 GB of windows and 8 GB partition for recovery, I tried to merge these partition to get rid of the recovery and have only a single partition SSD. Longbstory short, I failed and got a blue screen, then a restart and now I have this:
  http://i.imgur.com/NmAkhgO.jpg

  I have Windows 8.1 the official site of Microsoft, I have orginal CDkey (not OEM Acer's). The version I downloaded is a 32/64-bit Installer (I think, but it can be 32-bit only)
  I tried to configure the BIOS by myself, but it always puts me the blue screen of windows (with error 0000225).
  I provided the BIOS with the default settings screens: http://imgur.com/a/jtyN2

  I prepared the USB stick to a .iso image with a program called Rufus, GPT partitioning system.

  Then I changed the BIOS settings to allow non-secure startup and boot from USB HDD first, and when you start, I hit F12. But I still get that: http://imgur.com/yE48diG

  -What would I do? Be able to start Windows 8.1 installator, clear all partitions on SSD and make sure that you have a 32GB with windows.
  -What I need? Help, because I can not boot from USB and run Windows 8.1 installator.

  I found the solution, everything works fine.

  To do this, you must keep two things in mind:

  1. you may not use Microsoft official .iso for the USB program - it does create a bootable USB stick for UEFI bios, the official downloader for Windows have the ability to create USB bootable .iso downloaded, but it is not able to do.

  You must create bootable ISO using software of Rufus (type simpy rufus in google or LINK), then all you have to do is to make sure that you have selected GPT partition scheme for your bootable usb key and the FAT32 file system.

  2. the most improtant thing which is our Acer Aspire Switch 10 supports ONLY 32-bit Windows, just all the instalators Windows that contains the version 64 bits are wrong. Conclusion is simple, you need only 32 bits instalator, the 32-bit/64-bit custom works (like only instalation of 64-bit that is obvious)

  Hope this has helped.

• Aspire Switch 10 does not light: 10 Windows Installer failure problem or coincidence?

  Greetings! I have an Aspire Switch 10 originally running Windows 8.1 32-bit with Bing, which is a little less than a year. I had not used for several months, so in the course of a few days had been the installation updates which have been missed, while it was not in use. Yesterday, the update of Windows 10 presented, I ran the utility, which determines whether the system can be updated and then decides to go, despite some reservations about it based on horror stories that others have shared with me. But I thought that the relatively 'new' OS on it mitigate the risk to some extent. Maybe not so much. I'm not a professional computer, but have done enough hardware and DIY software over the past 20 years that I thought I might give this a go with limited risk, but in hindsight should have been more careful because the operating system is rather an essential component of the computer.

  Download was fine, and the installation started and was about 19% when I had to leave unexpectedly for a few hours, so I don't know what happened during this time, or when the installation has stagnated. I went back to a completely black screen and a unit that does not turn on no matter what I try. I spent several hours last night looking and try different ideas on how to at least get it lights up, while I might try some of the other patches. No luck at all.

  I thought I had created a recovery file, but I can't find a flash drive with one, if my memory fails me on creating a file of recovery, or lost it. Anyway, since I can't get the unit running, I'm not sure he would do any good if I had one in hand or bought an Acer.

  The camera has a little less than 3 weeks left on the hub of the manufacturer and is subsequently under an extended warranty from Costco. However, the extended warranty does not cover problems caused by software or applications, so if it is a problem that was probably caused by the installation of Windows 10, I'm stuck with a brick or will continue to try to fix it myself or find a computer local store who might be able to help without the cost more than what I paid for it originally.

  All the advice, assistance, are welcome. Thanks in advance!

  Here's an update on my problem. This morning, I had a live chat with a support of Acer person. After a last-ditch effort to revive my machine from me, the conclusion was what I thought: the BONES disappeared. Fortunately, because the model is one that supports Acer for Windows 10 and my machine is still under warranty, the repair (original reinstallation of the operating system) will be covered by the warranty. The downside is that there is no local service center, so it needs to be shipped to Texas.

  Needless to say I'm going to stick with the original OS as soon as I get it back.

• is my function of co-dependency on my removed switched phone modem.no lights on the port, ethernet port net connect.

  Thank you ~ RELLIK ~ for your help check modem switched on the lights. DSL, sr100g.problem now extends to my ethernet port lights not on.some time ago I removed my mod.which of internal phone has been used for DIALUP.it prevented my lap.from start after dell logo splash screen.so I used an external modem QUESTION.IS MY PORT AND LIGHTS CO-DEPENDENCY ON MY OFF DIAL UP TV TELEPHONE MODEM ETHERNET?

  You should stick to a thread, or at least to copy texts from that earlier instead of making people to drive to the top of your thread earlier.

  It would also help greatly if you have formatted your messages using sentences and paragraphs.  It is very difficult to read this single run-on sentence:

  Thank you ~ rellik ~ I got the my dsl phone co.check, sr100g, and on.problem lights came now extends to my lap.port lights don't turn only not on.so here we go again! I will try to clean the pins, eight of them and see, then if it doesn't maybe goinside to check connections. HOWEVER! I ' M A LITTLE MISTIFIED ON ANOTHER TOPIC! I had a phone internal modem.actiontec.mp100mdf2.this to that I used. DIALUP INTERNET.discouvered the modem stopped lapt.from turning on.after dell logo splash screen.desided to disassemble and clean took out and decided, out of curiosity, to turn on the system and it came, I reversed and reconnect, modem usb external bad.bought, worked, BUT very good! COULD YOU ME TELL IF MY ETHERNET CONNECTION IS CODEPENDENT ON MY PHONE DELETED. MODEM? kentempo.

  or, in this case, this one:

  Thank you ~ RELLIK ~ for your help check modem switched on the lights. DSL, sr100g.problem now extends to my ethernet port lights not on.some time ago I removed my mod.which of internal phone has been used for DIALUP.it prevented my lap.from start after dell logo splash screen.so I used an external modem QUESTION.IS MY PORT AND LIGHTS CO-DEPENDENCY ON MY OFF DIAL UP TV TELEPHONE MODEM ETHERNET?

  To answer your question of capital letters: no, the behavior of your Ethernet card, including its lights, has nothing to do with your telephone modems, current or previous.

  • Open the Device Manager (start > run > devmgmt.msc > OK)
  • Click on the + to the left of network adapters to expand the category.
  • What devices are displayed?
  • Y at - it a warning next to your network adapter icon?  If so, double-click on and to report to what appears under the "device status".
  • Close the Device Manager and open the network connections (start > run > ncpa.cpl > OK)
  • You have an icon for "Local Area Connection"?
  • What is written on the line under the title "Local Area Connection"?
  • Right-click on the icon and select Properties
  • In the 'Général' tab there is a window titled "this connection uses the following items" - report anything that is listed in this window.