Change paper size problem

Similar Questions

• Large format printer Officejet 7110 cannot change paper size

  I have the following problem:
  I installed the printer drivers, but after selecting a3 paper size selection is not maintained (the choice exists, but not fixed), in other words, when I on the printer again options paper size is set to letter. I can't change the paper size to any greater than the letter paper size, the sizes below are accepted (A4 is accepted).

  I tried to uninstall and reinstall the printer driver.

  I tried to install on my laptop and it works well on it.

  I tried to stop the activities of the antivirus and firewall still does not work.

  I tried to install the printer with usb cable and still does not work.

  I tried to install in my PC wife and still does not (same problem).

  I tried to delete all the info on the printer on the folder "User\appdata" and still does not work

  I installed it on an old PC with windows XP SP3 and it works well.

  My PC and my wife is windows 7 ultimate 32 bit; (does not work)

  My laptop is windows 7 64 bit homepremium. (work);

  My oldComputer is windows xp 32-bit sp3 (work);

  The printer should work on my pc and my wife, since these are our work units every day...

  The fact is that my computer cannot print beyond the letter format.

  A solution?
  I have seen that many people have had this problem but it does not support HP solution.

  Hi andrewcass2,

  On three computers, you have just this problem with Windows 7 ultimate 32 bit.

  I had a similar problem with another post, here are a few steps you can try.

  Change the settings for location on the computer to the United States. (may not be allowing changes to paper size)

  Go to start, Control Panel, language and region. Select the location tab, click on the menu down and select United States

  States. Then click on the Formats tab, click on the menu down and select English (United States)

  Restart the computer.

  Try to change the settings again.

  Try Notepad to see if you have the same results.

  Try also to uncheck the option 'Ladder content for A3' from the program you are printing from.

  Let me know how make you out.

  Thank you.

• Custom with iPF 8400 paper size problem

  I created a custom paper size of 11 x 14 inches for my new IPI 8400. My file is 11 x 14 size and print perfectly on my Pro 100, but when I send it to the 8400 it cut a full inch of my image, send me 3 normal small borders and a big. I tried to re-sizing of the image to 10.75 x 13.75 inches, and it still cuts a full inch of the image. Verification of image on the main page does not change, nor is the page. Printing from PS CC, win 10. Am I missing something here - just may not understand what?

  Hi mk1051,

  It is recommended that you contact technical support direct assistance.  There is NO charge for this call.  Please call 1-800-423-2366, Monday to Friday 08:00 to 08:00 pm et, except holidays.

• Paper size problems

  I have a HP Officejet 7500 all-in-one printer that I use also to receive fax so needs A4 paper to charge at any time, however when I use eprint printer not print jpeg files that people send me because paper photo 8 x 6 is not loaded, how do I get jpeg files to print on A4 media?

  Spot TV poster image printing on A4 so why is it not possible?

  Hi MissTeach75, the ePrint service is configured to always print .jpg (or other image file formats) in a format 4 x 6 "when the images are sent to the printer as attachments to an email ePrint. However, you can get the files of images printed in sizes A4 (and other paper formats) using the appropriate HP printing app. It is a bit more initial setup required by the person sending the image but it works, I tested it and here's what you need to do.

  1. The person who sends the picture will need to download app home & Biz (Android/Symbian) ePrint and ePrint (iPhone/iPad) on their smartphone or Tablet (http://www8.hp.com/us/en/products/smart-phones-handhelds-calculators/mobileprintingsolutions/index.html?jumpid=ex_r11400_go/mps)
  2. When they first open the app after download, it will be asked to register with the ePrint service. That they must do this or the solution will not work. No matter if they do not have an ePrint printer themselves, they will need to sign up to the service via the newly installed on their device application.
  3. In option settings in the app, they will be able to add a printer manually what they do by typing your printers email address (which they needed anyway if they were going to send the JPG as an attachment).
  4. Once they have added your printer to the list of available printers on their device, they can select the jpg file that they want to print and they will also select options for setting print A4 paper.

  The beauty of this solution is that it's true remote printing, the sender does not need to be on the same WiFi network as your printer. However they must be connected to the it internet at the moment where they send the active print (like your ePrint printer) job and they must register at the ePrint via the application service on their device. If any of these conditions are not present it will not work.

  I hope this information is useful and that it helps you to start receiving files jpg in A4 format with your ePrint printer.

  Good luck.

• problem with the HP 7310 - incorrect paper size fax

  I have a hp 7310 printer/fax/copyer and everything that he was working great until that earlier

  fax work perfect until we started to get a paper size incorrect message when receive us a fax

  We set it up to 4 rings

  We also have a fax set up report

  I tried different formats (as well as in setting up fron a4, letter, legal)

  even tried different weight

  nothing seams to fix the problem

  Thus, when receive us a fax, it rings 4 times... print a blank page... stop and it says wrong paper size... If you press ok, it prints the fax and fax report

  any ideas?

  don't know if it's a part of it as well when we're going to copy something the scaner it going long stubborn to scan... like 5 min it will print the item which has been fine scanded

  Thank you

  anyone until we change our all hp printers out for new... it will not a hp after that

• To change the paper size

  Environment: Windows Xp
  Printer: HP Designjet T1100 44 inch HPGL2
  Driver: HP DesignJet T1100 44 inch HPGL2 (61.73.362.41)
  Application: Adobe 10.1.3

  We have a user tries to send a print to this device, and they try to change the size of the paper. By default, this printer is configured to print to A0.

  Accessing the printer/quality tab we change the size of the Document to A1, but it continues to be printed in A0. This printer shared from another computer. When printing directly from the desktop the same problem does not occur.

  Some of the things we have tried

  • Confirmed that the two computers are the same version of Adobe Reader
  • Aligned to Adobe (right size Options, choose page PDF format paper source)
  • Aligned with various parameters of the size of the Document, the Source document printer

  On the 'features' page while we tried to set Options for resizing for 'Print Document On' every time that we are navigating away from this tab it seems back to "actual size."

  Any help/suggestions would be appreciated!

  Hope this DarrenBarrick

  HP Designjet T1100 is a commercial product. I will suggest to post in the forum for HP Business Support for a better chance to find a quick solution.

  You will find the commercial Council of Laserjet here.
  http://h30499.www3.HP.com/T5/printers-Designjet-large-format/BD-p/BSC-414#.UCwztaGPXfI

  Hope you find the help you need
  RobertoR

• All-in-one HP Officejet 6500 has: paper size or the type of error message problem

  I have a HP Officejet 6500 all-in-one a and am running Win 7 on a desktop computer.
  I get a paper mismatch (type and paper size is incorrect) error message.
  The printer is not connected to the internet, but it is connected by a USB cable to the computer.
  I look at the instructions to make an internet connection and they were just too complicated. So I download the update of the firmware and ran to the computer. He would not go beyond the area of printer selection where no printers were found. Clicking Refresh has not helped.
  This update of the firmware seems to have solved the problem for some users, but I need to know how you install it.
  Thanks for your help.

  17/03/2015 #2

  I think I solved the problem. I went to the website to download drivers, etc., and, rather than to specify the printer, I clicked the button to let HP identify it. It came with the correct name (see post) preceding. Then, I downloaded and installed the full feature software and driver. The first attempt to print from Excel led to the mistake of page size, but, on a whim, I tried twice and had two successful prints without error. Until further notice, I mark this as solved problem.

  Thanks for your help,

  LK

• How do I change selection of paper size of 8.5 x 11 for HP Photosmart C4750?

  Original title: HP Photosmart C4750 paper size

  How do I change selection of paper size of 8.5 x 11 for HP Photosmart C4750

  Hello

  Thanks for posting your question in the Microsoft Community.

  I understand that you want to change the selection of the paper size of 8.5 x 11 for HP Photosmart C4750. Correct me if I'm wrong.

  I suggest you to consult the HP printer manual to change the size of the paper by referring to the link below:

   

  Manuals for the range of all-in-one printers, HP Photosmart C4750:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&DLC=en&LC=en&product=3831745&

   

  For more information:

   

   

  Contact HP:
  http://welcome.HP.com/country/us/en/contact_us.html

  HP Support Forums:
  http://h30434.www3.HP.com/PSG/

  I hope the above information helps you and your response is very important for us to ensure a proper resolution.

• How can I change the paper size of the pdf file?

  I use Adobe Acrobat Reader X, but the paper size of the PDF file is larger than the 81/2 "x 11". I need to change the page size of the PDF file.

  Hi matthewc70309046,

  There is no option to change the Page size of a PDF document.

  Try to print to the Adobe PDF format, in the dialog box print, select Page layout-> size desired by you.

  Kind regards
  Nicos

• Photoshop Elements 11 - problem when processing multiple files - change the size of the image

  When you change the size of several images with file - process several files (or batch processing, however it is called on the menu in English)

  There seems to be a bug in Version 11.

  Regardless of my entries, that the file size is reduced to under 10% of the original value, such as 4 MB to 350 KB.

  Even if I don't score no parameter for a change of size and also, do not change the format, the file size is decreased.

  The entries in the properties / details of the converted jpg correspond to the settings in the menu, but the actual size is very small.

  Seems that PES 11 has low values in the default settings in the background and does not take into account all entries.

  In the old version 9, the same function worked without problem.

  I installed the updated version available today, 2013-01-05.

  Can you please sign this question on our return in case of problem: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

• Problem changing font size

  Hello

  I have been working on a script and I have the following line of code, where I create and change the size of the font of the text just created. However I can't make it work. I can change some other text properties, is why it's me stumping.

  var finishText = thisComp.layers.addText(finishTime);  
      var textProp = finishText.property("Source Text");
      var textDocument = textProp.value;
      textDocument.resetCharStyle();
      textDocument.fontSize = 36;
      textProp.setValue(textDocument);
  

  Help appreciated! Thank you!

  Nathan SUP,

  I tried the following code and it seems that everything is working properly.

  var thisComp = app.project.activeItem;
  var finishText = thisComp.layers.addText("finishTime");
      var textProp = finishText.property("Source Text");
      var textDocument = textProp.value;
      textDocument.resetCharStyle();
      textDocument.fontSize = 50;
      textProp.setValue(textDocument);
  

  Can you tell us your AE version?

• custom paper sizes missing 8610

  I've created some custom paper sizes that are available under a pdf printer but not my hp printer

  Hello

  On 8 x 4 in, you earn a 4 inches in width or length?

  Be aware that a length of 4-inch is not supported by the hardware (5.0 to 14.0 inches) and so not to appear, if this is the problem in fact just change between the height and width settings for the shape and orientation of the paper...

  Shlomi

• How can I change the size of a photo book without changing the theme

  How can I change the size of a photo on iphoto book without changing the theme?

  Click the button change theme and in the next window, select a different size without changing the theme.

  

  Be sure to carefully check each page as with a different size, you may have questions of text, or all text in the text boxes.  Before ordering the book read it again according to this document from Apple: get an overview of a project on paper in Photos, iPhoto or Aperture to avoid problems - Support Apple. Save the PDF file to compare it to the printed version when it arrives.

  

• M2Q28A: Deskjet GT 5820 does not correctly print legal paper size.

  The printer does not print correctly if I change the legal paper size it says paper mismatch. a procedure that I didn't change default paper size. then I change th EWS configuration too but the problem is still there. Please help me.

  My operating system is windows 7 and 10 please help.

  Hi @S3dnnie,

  Thanks for getting back to me.

  I was looking at the specifications of the printer HP DeskJet GT 5820 User Guide and it doesn't list legal document as a support for a type of paper supported, but if it has legal papers for a paper Type in the menu drop down, it should be able to print.

  I download and run the HP print and Scan Doctor to check the printer software. This tool can diagnose and solve many problems of printing software and printer.

  Please let me know how it goes or if you need further assistance.

  If this helps you find a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Whenever I try to print an envelope, it remains on the size 10. I can't change the size. Why?

  Even the title

  Hello

  1. What is the serial number and model of the printer?

  2. it happens only in print envelope?

  3. don't you make changes to the computer until the problem occurred?

  4. what operating system is installed on the computer?

  5. what application you are using to print the envelope?

  Method 1:

  First, try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  Also I suggest you to select printing preference by following the steps mentioned below:

  (a) click Start

  (b) select devices and printers

  (c) make a right click on the printer icon, then select Printing Options

  (d) now select Advanced, and then in the option of paper size legal tab as the default size.

  (e), click apply and then click Ok

  Try to print a legal size page and check if you face the same problem.

  For your reference: Printing tips: Learn how to print labels, envelopes and much more: http://windows.microsoft.com/en-US/windows-vista/Printing-tips-Learn-how-to-print-labels-envelopes-and-more

  Hope this information is useful.