mixture of indicators and controls in clusters
I have a cluster on my façade containing different types of controls (digital ring, etc.). Two controls are multiplied and the result is displayed as an indicator on the front panel.
From the point of view of users, this indicator is part of the data set, but it is outside the cluser, looking a bit messy. Is it possible to bring him inside the cluser, on the front panel at least?
Thank you
Asked before. The answer is no. You can, however, have simply indicator sitting "over" in the cluster, but not physically in it. Select the indicator and then using the arrow keys on your keyboard, move on the cluster. It is not placed in the cluster, but lie on a different plan-Z. It will be a shadow in edit mode, but the shadow disappears in run mode.
Tags: NI Software
Similar Questions
-
variables without indicators and controls
Hello
Is there a way to create a variable without having an indicator or a control in the front panel. I want just to save and update the data in the block diagram.
Thank you
Venkat Rao
-
Hello world
If I created a VO based EO but not indicia of control specified. Is there a way to do that now on the area of occurrence, and then refresh the VO for the indicators of control?
James
As long as you have not given advice in the original Version that you can just add the tips in the EO and recompile the model project. The indicators will then be inherited by the VO.
Timo
-
Tab and control keys do not work the browser Firefox (my browser is up-to-date). The buttons work in IE and Chrome, however, until I realized that, I even changed my keyboard for a brand new, hoping that would solve the problem.
Hello arlusk, the problem is probably an extension that is not working properly. Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.
(If you use it, switch to the default theme).
- You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
- Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.
Once you get the pop-up, simply select "" boot mode safe. "
If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
When find you what is causing your problems, please let us know. It might help others who have the same problem.
Thank you.
-
Can satellite P300 - I connect to a TV and control?
Can I connect my Satellite P300 to TV hdmi-cec and control the laptop with the tv remote?
Hello
Connecting via HDMI cable should t be a problem. Just buy a high quality cable and connect both devices. With FN + F5, you can switch between monitors.
Unfortunately I think that it of not possible to control the laptop through TV remote. The TV remote is designed for your TV, not your laptop. ;)
-
When I downloaded the latest version, I got a new screen with the orange Firefox tab at the top. Which was very good, I found what I wanted, but the previous/next buttons didn't work. I checked the help section and went through suggestions to "toolbars and controls to reset" - this reset and I lost the orange box - which is not serious, but the previous/next buttons still do not work.
Do you have more than one tab open? If you don't go to a different site in one tab, then Yes, the buttons will be grayed out. If you went somewhere in another tab, then these sites should be accessible by clicking on buttons.
-
manage requests between acquisition and control program using agilent 34970 A
Hello
I realized an acquisition program of data with labview and agilent 34970, real-time acquisition works very well with a time you sample of a second... There is no problem
to complete the program and control the taps installed in a photovoltaic system, pumping system
I realized that a second program for the controlit is functional
but the problem is when I merge the two programs in real-time
This error is present at the execution of two programs at the same time, that is to say that they launch two request at the same time the instrument 34970 A
(the poster of agilent 34970A labview crashes)-------------------------------------------------- --------------------------------------
what I want is to find a little thing programming to manage two outgoing REQUESTS at the same time in LabVIEW instrument and create a kind of delay between two REQUESTSSorry for the bad English
Thank you
If you are in the same executable, semaphores works well. You lock the semaphore before making your order and demand. Release after you get your data. If the lock is already taken, then the semaphore just will wait until the lock is available. Only one process can act both in this way.
-
Additional panel in the panels and controls in the Panel generated .h file
I have a sign in my project, it is called LO_LVL_PNL.
The generated header file seems to think that there are more. Here is the 'Panels and controls' section on the generated header file:
/ * Panels and controls: * /.
#define DITHER 1
#define DITHER_CLOSE 2 / * callback function: DITHER_CLOSE_CB * /.
#define DITHER_Dither_Settings 3 / * callback function: DITHER_CONTROL * /.#define LO_LVL_PNL 2
#define LO_LVL_PNL_SENDBUTTON_2 2 / * callback function: DIDsBUTTONcb * /.
#define LO_LVL_PNL_SENDBUTTON_3 3 / * callback function: EraseBUTTONcb * /.
#define LO_LVL_PNL_SENDBUTTON_4 4 / * callback function: SENDBUTTON_noe_cb * /.
#define LO_LVL_PNL_SENDBUTTON 5 / * callback function: SENDBUTTONcb * /.
#define LO_LVL_PNL_RESET_CAN 6 / * callback function: RESET_CAN_CB * /.
#define LO_LVL_PNL_UUTRESPONSE 7 / * callback function: UUT_RESPONSE * /.
#define LO_LVL_PNL_CLEARBUTTON 8 / * callback function: CLEARBUTTONcb * /.
#define LO_LVL_PNL_EXIT_BUTTON 9 / * callback function: cb_quit * /.
#define LO_LVL_PNL_Comm_Set_TEXTBOX 10
#define LO_LVL_PNL_COMMANDBUTTON 11 / * callback: CheckState * /.
#define LO_LVL_PNL_COMMANDBUTTON_2 12 / * callback function: Select_Files_DID * /.
#define LO_LVL_PNL_BINARYSWITCH 13 / * callback function: SetProgram * /.in my IUR I can find LO_LVL_PNL components, but not parts of DITHERING.
Then, I renamed my generated header file, so it can regenerate without these additional items, but they get included when I recreate it.
In the file of the UIR, if I double click on he Panel it opens and displays that the Panel is called LO_LVL_PNL.
It started because I'm trying to read the value of a switch on the Panel, and in the call, I get a runtime error that follows:
GetCtrlAttribute (LO_LVL_PNL, LO_LVL_PNL_BINARYSWITCH, ATTR_ON_VALUE, & on_off);
NO MORTALS RUN - TIME ERROR: 'gui_handler.c', line 135, col 13, thread id 0x0000179C: library function error (return value ==-42 [0xffffffd6]). The handle is not a panel handle
I don't know if it's two separate issues, or DITHER things cause the error; but I need help to fix both.
The first parameter to GetCtrlAttribute() must be the handle Panel, not the ID of the Panel. The handle is returned by your LoadPanel() call.
Do you already have a group called DITHERING? Copied from an earlier project, perhaps? Perhaps the editor of UIR has hidden or placed outside the screen. Try using the option editor find to see.
JR
-
ActiveX: Open a separate window of Windows Media Player 9 and control playback
Hey all,.
I'm trying to open a video in WMP4 automatically in Labview and control. There is an existing ActiveX container, but it remains on the front panel. I can control its playback, but can not pause and resume.
I can also open the video in a window outside of LabView through Labview WMP9, but I was not able to control. Simply run it and then watch until it ends. It is the preferred operation, I need to understand.
LabView version: 8.6
ActiveX application: Windows Media Player 4
OS: Windows XP
My questions are:
(a) how to pause and resume a video file, if you use the ActiveX with LabView container ensures
(b) how could I access an instance outside WMP open through LabView playback controls (because I want to automate reading based on acquired signals)
Note that the ActiveX refnum is WMP4 while the version on XP is WMP9.
Thanks in advance for your help,
Hasan
I had trouble with your application. I don't know if it's
my version of LabVIEW or something else. He will not play for me.I would like to direct you to the following thread:
Windows Media Player ActiveX plays do not image, but the stand alone WMP application. Why?
If all goes well
This will help enough to do what you want. I was not able to get
whether at work, but it seems that it is much discussed on the
forums. Everyone has tried to do the same thing as you? -
Can I install video driver AMD and Control Panel on HP ProBook 4540 s?
Hello
I want to install driver video AMD and control panel alongside Intel video driverand Control Panel.
Here's my computer laptop Information System:
Name of the Microsoft Windows 8.1 operating system company
Version 6.3.9600 Build 9600
Another Description of the OS is not available
Manufacturer of operating system Microsoft Corporation
ROGUE system name
System manufacturer Hewlett-Packard
HP ProBook s 4540 model system
System Type x 64-based PC
SKU C1B74PA #UUF system
Intel Core processor i5 - 3210M CPU @ 2.50 GHz, 2501 Mhz, 2 Lossnay, 4 logical processors
BIOS Version/Date Hewlett-Packard 68IRR worm. F.50, 04/08/2014
SMBIOS Version 2.7
Embedded Controller Version 88.33
BIOS Legacy Mode
Baseboard manufacturer Hewlett-Packard
Model baseboard is not available
Name of plinth base
Role Mobile platform
State of secure boot not supported
PCR7 Configuration binding is not Possible
Windows directory C:\Windows
System directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
The local United States
Hardware Abstraction Layer Version = "6.3.9600.17196".
User name TuHiN\T u H i N
Bangladesh time zone standard time
Physical memory (RAM) installed 4.00 GB
3.88 GB total physical memory
Available physical memory 1.95 GB
7.88 GB total virtual memory
5.59 GB available virtual memory
Page file space 4.00 GB
Paging file C:\pagefile.sys
Hyper-V - VM monitor Mode Extensions Yes
Hyper-V - second level address translation Extensions Yes
Hyper-V - virtualization enabled in Firmware No.
Hyper-V - data execution Protection Yes
Hello:
From what I can find on the product number you posted, it only comes with the integrated graphics Intel HD 4000 which means that you can not install the AMD software because it won't do a thing.
That only works for laptops with AMD/Intel switchable graphics.
HP Probook s 4540 C1B74PA Core i5 - 3210M Ram 4 GB HDD 750 GB 15.6 inch
* ProcesseurIntel Core i5 - 3210M (2.50 Ghz, 3 MB L3 Cache)
* RAM 4 GB DDR3 BUSS 1333 Mhz
* 750 GB HARD drive -5400 RPM (SATA)
* Display 15.6 "LED
* Graphics Graphics Intel HD 4000
* Wireless 802.11 b/g/n
* External ports3.0/VGA/HDMI/RJ-45/ Headphone Out/Lan10/100/1000/bluetooth usb...
* Pin 6-cell
* Camera 1.3Mpx
* Weight 2.5 Kg
* OPERATING SYSTEM PC BACK -
My volume icon and control is missing
My volume icon and control is missing and I also think that the program is now defunct. A spokesman for AOL of sees has accessed our computer to 'clean up' to make it work better and I think that he has removed my volume and its program. When I tried to add the volume on my computer icon, he told me I do not have the program and install it. When I went to add the program by following the instructions, it took me to Microsoft, but there is no program called "volume and noise." In reading other posts, that it is said to right click on Start/Properties/Notification...but, I don't have the option "notification" under properties. What should I do?
My volume icon and control is missing and I think also the program is now defunct. A spokesman for AOL of sees has accessed our computer to 'clean up' to run the best and I think that he has removed my volume and its program. When I tried to add the volume on my computer icon, he told me I do not have the program and install it. When I went to add the program by following the instructions, it took me to Microsoft, but there is no program called "volume and noise." In reading the other messages he said right-click on Start/Properties/Notification... .but I don't have the option "notification" under properties. What should I do?
Hello
Notification options are only available for Windows Vista and higher. The Control of the Volume icon may appear from the Control Panel.
You said that the Spokesman of AOL could have removed the Control of Volume, please make sure that the following files exist on your system to see if the Setting of the Volume has been either deleted or not%SystemRoot%\system32\sndvol32.exe
If you do not want to enable the display of the Control of the Volume icon, please try the following[1] method: Using the control panel to change the settings for sounds and Audio devices- On the start menu, select Control Panel.
- Double-click sounds and Audio devices.
- On the general tab, check Place volume icon in the taskbar
- Click OK
Thank you
Have a nice day :) -
Windows 2000 Professional has the capabilities of remote assistance? My sisters husband just passed away and she doesn't know anything about computers. All their documents, photos, ect..., my brother-in-law kept on the computer. We live thousands of miles away and I can't fly to him. Can I remotely access her computer and control it with mine that uses Windows XP Professional? If the answer is "Yes", if you please tell me how to do it.
Hello Jeff,.
-Remote Office application do you use?
You will be able to connect Windows XP computer to Windows 2000 via the remote desktop connection.
I suggest you to check the following links for the desktop connection software remotely for Windows XP and Windows 2000.
-
Internet, not able to browse computers on the network
The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)I'm puzzled.Hello
I suggest you to send your request in the below link.
http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads
-
Req to send my audio drivers and Control Panel
Hello, my audio drivers and control panel have been lost due to the attack of Trojan horses. I am unable to choose my required drivers and Control Panel, as an error report occurs and is closing is the open window.so you, please please send me the suitable audio drivers and control computer panel.my laptop presario c555nr model.please send them as soon as posible.
These are yours?
Alternatively, you can try to restore your computer to a point before the attack of Trojan with the Microsoft System Restore.
Go start > all programs > Accessories > system tool > system restore.
If the Trojan damaged your system to the point where you can't fix it, you may need to reload your OS using your HP Recovery Manager. Save all of your personal information. prior to this, as it will be deleted.
-
What to do if your computer has been hacked or hacked and controlled by a remote elsewhere.
Original title: hijacked, hacked into the computerWhat to do if your computer has been hacked or hijacked and controlled by a remote connection
Furthermore. Many different programs added and if I try to uninstall or remove programs I don't recognizeI'm being denied access. I have cleaned, restored and repaired my computer several times and it keepshappens to me on my laptop and my PC computers. my user name is not changed, but the controlis not outside of me and they're using my name. Can anyone help?You must save your stuff important on an external and reinstall your entire system since the manufacturer's recovery partition. You can find instructions for this on the site of manufacturer support.
If you have no recovery partition, follow...
http://Windows.Microsoft.com/en-CA/Windows7/installing-and-reinstalling-Windows-7
Immediately after having re-installed, the next task is to make all Windows, including SP1 updates if your floppy drive or the partition recovery date before the service pack.
Then install your antivirus solution. Avoid using McAfee or Norton. It is a good solution, free and easy to use...
Microsoft Security Essemtials... http://Windows.Microsoft.com/en-CA/Windows/products/security-essentials
OK so far?
Then, change the passwords for all programs that interact with the Internet... This includes Facebook, Windows Live Messenger, Yahoo Messenger, Skype etc.
When you create a password, do NOT use real names and use a combination of numeric characters and alphabet, up and down case. It must be complex enough so that he could not be found in a dictionary, but not quite complex that you don't remember it...
Maybe you are looking for
-
10.11.5 iMac upgrade hangs on reboot
Hi all Saw the son near him, so I'll post what I pass the problem. I've updated through the apps store the 10.11.5 el Captain update. Download and install went quickly until the screen says reboot... Then he hung for one hour. Powered it down, I rest
-
Satellite C55D - buttons left and right touchpad do not work after the upgrade to Windows 10
Just what the title says. My touchpad on my C55D satellite works well, but click keys do not work. I tried everything I know how to solve this problem and can not understand. It doesn't seem to be any "Advanced settings" anywhere, as I suppose it wou
-
Put multiple graphs of waveforms in a report
I am a new user of LabView and I am trying to select more then a graph of a waveform with a control or a list to my report of Word, but I couldn't find a way to do it. I can choose ONE of many graphics, but sometimes I need to send two or three. My .
-
After trying to re - install Skype, I received this message.Install Skype has no Code 1601The Windows Installer Service is unavailable. System Setup Windows Error code 1601 can't access.
-
WD external hard drive not recognized by Vista
I am running Vista Home Premium with Service Pack 2 Build 6002 on a HP Pavilion dv6704nr laptop. I just bought a WD My Passport Essential 500 GB external hard drive with USB 2.0 for PC connection. When I plugged in there first, it did prompt driver i