MLAG FW 6.0.0.8 on 8164 (now N4064F) via GUI

Hello

am I right when I assumes that the newly introduced MLAG function is available on CLI and not via GUI?

Best regards
Joerg

VLAN 30 has been used as an example and could be any VLAN you want it to be. You may leave the default of VLAN1 if you wanted to. The link exchange peer will be placed in mode Trunk and the Dungeon packets are sent through the layer 2. If peer switches must not be mode layer 3.

In the example, the switch partner A and B are layer 2 switch. You would not assign an IP address in VLAN 30. You EF only an IP address in VLAN 30 on the device running Routing on the network. you treat the MLAG

Tags: Dell Switches

Similar Questions

  • Agilent 8164 Lightwave measurement system pilot b

    Hi all

    I have some problems with an Agilent 8164 b Lightwave measurement system, is there a driver for this device to work with labVIEW?, the Programming Guide it says I should "convert", but I think that this option is available only with older versions of labVIEW (I have 8.6).

    In fact, I am able to see the unit with MAX and perform read, write, and Query commands.

    I hope you could guide me through this and start working with this unit.

    More details:

    -In the course of running on Windows 7

    -LabVIEW 8.6

    -Use the GPIB interface

    Thank you very much in advance for your time.

    -Gozto-

    PS: of course I ask here because there was no driver available on ni.com

    Do not confuse the plug-and-play driver with LabVIEW envelope. Plug-and-play driver (dll, etc.) must be located in the IVIfoundation folder. In the \instr.lib folder should be the llb of LabVIEW functions which are of COLD LAKE to the dll. Attach an image of the windows Explorer you will fix any image.

  • Reset password on 8164 stacked

    Hello

    We have a pair of 8164 (v5.1.0.1 running) that have been setup by a previous administration.  We cannot find a password documented anywhere, and RAY wasn't Setup.  We try reset the password.  When we chose the 12 option in the start menu, the charge switch and became the secondary switch in the stack.  However, this means that we cannot access the CLI this button to reset the password.  I can easily reset the other switch, due to an incomplete wiring configuration (the other switch uplink only).

    I searched, but couldn't find that a password reset procedure for the stacked switches.  I need to reset the other switch and also put in password recovery mode to remove this?

    Thank you.

    You need schedule downtime to bring down both switches. Running 12 of the boot menu option, while the secondary switch is turned off. Once the desired master is propelled upwards, then put the secondary switch the again.

  • Simulate the MLAG on N1524 battery?

    Hello

    Documentation, I know that the N1500 series does not support MLAG. But if I stacked 2 N1524s, then I create a normal SHIFT with links on the two switches?

    For example, with is 2 switches stacked, possible to put an item in gi1/0/10 and Gi2/0/10 port in an OFFSET?

    Kind regards
    Sean

    Sean,

    Yes you can.  It's a good practice when connecting to a battery, so that if one of the switches on the stack goes down you will always have connectivity.  When a stack is created, all other devices on the network see it as a simple switch and do not know what a stack.  So lag to several members of the virtual big switch (the stack) is perfectly acceptable.

    B

  • MLAG CORE + OF THE BATTERY TO ACCESS TO THE

    Hi all

    We replace our Powerconnect with N2048 switches to the access layer and N4032 (2) at the base.  I have never used stacking in the past and has been hope manage members as one.  Could it not also their delay to the kernel for redundancy and to stack switches access?  The core could be stacked as well, but I read MLAG is faster for failover.

    Should I have a problem with this config?

    Thanks for any advice.

    Charles

    Stacked switches act as a logical switch, which means you can use any port on a switch in the stack as a LAG member. The N-series manages group up to 8 ports. With a stack you will usually spread the LAG on multiple switches. This creates a scenario where you have spend a little redundancy and link redundancy.

    Example of config should look like this:

    Console (config) # interface gigabitethernet 0/1/1

    Console # channel-group 1 active mode

    output console #.

    Console (config) # interface gigabitethernet 0/2/1

    Console # channel-group 1 active mode

    output console #.

    Console (config) # interface port-channel 1

    console switchport mode trunk #.

  • S4048-ON - MLAG Question

    From the world of Cisco, I wanted to put two S4048s in a VSS mode.  Dell touts the MLAG via VLT abilities, but as far as I can tell, it is analogous to the Cisco Nexus VPC.  I'm therefore looking to separate control/management plans.  It is not possible to rethink the VSS as capabilities?  The reason why I ask, is I'm looking for high-times.  If I get only L2 abilities off SUVS, so I run VRRP between switches, but I am concerned about the convergence time.  I have not messed with VRRP a lot, but I was pretty happy with HSRP 2 convergence.  I can foresee periods of weak convergence with VLT + VRRP or should I consider going with a configuration of the stack instead?  Also, I used Cisco enough that I met of numerous warnings "featured".  Any configuration warnings, should I be aware of cases using the VLT or stacking?

    Well, I answered my question after his arrival in the whole of the additional documents (VLT).  What I'm looking for is "peer routing", which denies the necessity of VRRP.  If the two switches will actively transmit packets, instead to pass traffic through the VLTi.  There should not be problems of convergence as a result.  This is similar to Cisco VSS AFAIK, except control plans are separated on the side of Dell.

    I am still confused but problems with devices monoresident; See my post above.  I guess I can lab this place, but it is not clear in a scenario of equal routing, if these devices will be a problem.

  • Implement MLAG with a single switch running

    Hello

    IM MLAG with two N4032F to a server and failover and balancing of load testing work. A problem I encounter is that the MLAG interface is wrong until the two switches are running. Can I somehow force the MLAG interface then go to the top with a single switch running? Let's say after power failure, where only the switch starts.

    CEST

    Running closed and no stop on the channel of port to the server displays the interface with a single switch running.

  • osapi_crash.c on dell 8164

    Playing with my new switches (a stack of 8164) when I look at the newspaper I see the following:

    <190>24 Dec 14:56:43 0.0.0.0 - 1 MAAT [72162340]: osapi_crash.c (661) 1% 5 Crash found logs.

    Someone can expose what it is and where I can find this journal (Journal of crash found)

    Sorry, I have no specific release date. Wishful thinking, I'd like to see 3-4 weeks, but it's all speculation.

  • How to change the time that stacks convergence on Dell PowerConnect 8164

    I have create a pile between two switches Dell PowerConnect 8164.
    But I want to know if I could change the time it takes for converges converges moment between them, I want to say... I have remove all the stacking cables (so no connection between no switches) and connect them then... something between 3-5 minutes for the complete convergence.
    Is there a customization here?
    Kind regards!

    There is no option of customization on the re-convergence of a battery.  It is basically kicking a restart of the operating system on the box.

  • How to print labels in my Thunderbird address book?

    I want to print mailing, as Avery 8164 labels, an addressbook or a mailing list in my Thunderbird addressbook. How can I do?

    Thunderbird has the ability to print an address book or e-mail.

    Thunderbird is not the correct software to do something like printing labels. You must use the MSOffice package or OpenOffice.org (free) see link: https://www.openoffice.org/

    Using OpenOffice.org Basic you can choose to connect to an existing database, and then select the Thunderbird addressbook. After the backup at a suitable location, you can then use OpenOffice.org Writer.
    File > new > labels
    Select the saved database filename.odb.

    See image:

  • Battery problems please HELP

    Hi all I just brought a laptop from pc world and there no battery sothey gave me money to buy one, but I can't find an anywere is a nightmere is a compaq presario a935em

    P/N KU062EA, someone got any idears and I have verified that hp and compaq sites please help

    Thank you very much

    HP parts... (800) 227-8164

    Contact HP:

    http://welcome.HP.com/country/us/en/wwcontact_us.html

  • Power died on the ENVY23

    I had my PC stop on me today and won't power back up.  When I tried to trace through the question, I see that the power supply on the cord no longer has the green light.  I tried other points of sale which had worked devices on them, but not luck.

    And advice on how to fix this?  I expect I will need to order a new power cord but have no idea where I'd get a.

    Todd

    TouchSmart ENVY23 (d038c)

    Hello Todd_. In my view, replace the power cord would solve the problem. If you want to know how to order a power cord, you can call the HP part store to 1-800-227-8164.

    If the product is under warranty, however, you could contact HP technical support instead. Their options will be based on the status of the security of the computer. If you do not have this information, you can locate it on this Web site: http://h20566.www2.hp.com/portal/site/hpsc/public/wc/home?ac.admitted=1384280905804.876444892.199480143



    You can use this Web site for information about how to contact HP properly, based on your region: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html



    Please let me know if you have any questions or concerns.



    Mario

  • Toshiba USB DVB - T TV Tuner Driver XP

    I have a problem with my laptop Qosmio Toshiba USB DVB - T TV Tuner and... I have install the Savvy TV as stated but when I insert the usb in the system tuner always respond with "unknown device" and won't let me assign the correct drivers.

    I tried to download the latest version of SavvyTV and follow the instructions in http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=8164&tstart=15 (restart every time and install in a good way) but the problem is always the same: usb not recognized and cannot be manually set the correct driver for the device.
    I tried also to delete the Windows registry with a name like trendy clientele, o usbdtv.inf without result after the reinstallation of the program.
    Could you please help me or suggest something?

    Thank you very much.

    Hello

    Please visit this site:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

    Here, you choose:
    The USB Options TV Tuner DVB - T tuner Windows XP options

    You will find two versions of different tuner driver. The latest version of 1.0.14.1218 is from 01/02/06. Try to install it. Maybe it helps.

  • What is the size of the fan in the SR1722X Office?

    Just need to know cuz im think upgrading to a slightly better to keep the temp down.

    Hello mrdewey,

    I see that the case fan is a 92mm.

    Case fan

    Here's the number to HP parts store. they should be able to tell the size.

    1-800-227-8164

    Let me know if it helps.

  • Check help for virus

    The other day, I clicked on a risky link who brought up a JavaScript message in my chrome window, with an option to click to go somewhere to "scan my computer a virus. I clicked immediately outside, but I have to think if you could download viruses aa only from that initial click. I checked my console logs and found this

    10/12/15 com.apple.preference.security.remoteservice [8104 6:36:43.601 PM]: unknown class AddRemoveBarCell in the path /System/Library/PreferencePanes/Security.prefPane/Contents/Resources/Base.lproj SecurityPref.nib Interface Builder file.

    After doing a little research on Google (I'm not very good at understanding computer jargon), I deciphered what that meant. Something had been inserted in my preferred security options when I clicked on the link potentially. I was very worried about it, and I checked the logs for more info, but nothing found. The next day, I found that my computer had operated while it was locked. I have Parental controls on my laptop which stops at 10:15 every night, so I was very worried to see that not only had my bluetooth enabled but he shared AirDrop with a unknown user. Can someone please check my logs and tell me if my computer is compromised.

    I accidentally deleted the pref above security change log, it appeared about 18:36.

    Just after I clicked on the link.

    10/12/15 6:27:08.868 PM SpotlightNetHelper [401]: touch settings [SLSUGGESTIONS] lack of SAP in the bag

    10/12/15 6:27:08.909 PM sharingd [321]: 18:27:08.908: server from release for user 503 on wake

    10/12/15 6:27:08.916 PM MIDIServer [2212]: Bluetooth MIDI driver begins...

    10/12/15 6:27:08.917 PM MIDIServer [2212]: driver Bluetooth finished from MIDI.

    10/12/15 6:27:09.136 PM identityservicesd [288]: : Observer of notification: notification com.apple.iChat: __CFNotification 0x7fe780434150 {name = _NSDoNotDisturbDisabledNotification}

    10/12/15 6:27:09.138 PM image [311]: : Observer of notification: notification com.apple.FaceTime: __CFNotification 0x7f811a707a40 {name = _NSDoNotDisturbDisabledNotification}

    10/12/15 6:27:09.177 PM identityservicesd [288]: : NC disabled: NO

    10/12/15 6:27:09.177 PM image [311]: : NC disabled: NO

    10/12/15 6:27:09.201 PM identityservicesd [288]: : DND Enabled: No.

    10/12/15 6:27:09.201 PM identityservicesd [288]: : update enabled: YES (subjects: ())

    'com.apple.madrid '.

    ))

    10/12/15 6:27:09.201 PM identityservicesd [288]: : Observer of notification: notification com.apple.iChat: __CFNotification 0x7fe78042b910 {name = _NSDoNotDisturbDisabledNotification}

    10/12/15 6:27:09.203 PM image [311]: : DND Enabled: No.

    10/12/15 6:27:09.203 PM image [311]: : update enabled: YES (subjects: ())

    "com.apple.ess,"

    'com.apple.private.ac '.

    ))

    10/12/15 6:27:09.211 PM identityservicesd [288]: : NC disabled: NO

    10/12/15 6:27:09.219 PM identityservicesd [288]: : DND Enabled: No.

    10/12/15 6:27:09.219 PM identityservicesd [288]: : update enabled: YES (subjects: ())

    "com.apple.private.ac,"

    "com.apple.ess,"

    "com.apple.private.alloy.sms,"

    "com.apple.madrid,"

    'com.apple.private.ids '.

    ))

    10/12/15 6:27:10.476 PM SpotlightNetHelper [401]: [SLSUGGESTIONS] error bag - 1005

    10/12/15 6:34:57.867 PM QuickLookSatellite [8012]: could not get the extension of sandbox for path=/Users/*censored*/Library/Caches/com.apple.quicklook.satellite. Errno:1

    10/12/15 6:34:57.874 PM QuickLookSatellite [8012]: could not get the extension of sandbox for path=/Users/*censored*/Library/Caches/com.apple.quicklook.satellite. Errno:1

    10/12/15 6:35:03.471 PM QuickLookSatellite [8012]: in-[NSApplication (NSQuietSafeQuit) _updateCanQuitQuietlyAndSafely], _LSSetApplicationInformationItem (NSCanQuitQuietlyAndSafely) returned the error - 50

    10/12/15 6:35:30.651 PM lsd [272]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

    10/12/15 6:35:30.684 PM lsd [272]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

    10/12/15 6:36:10.282 PM Spotlight [395]: Query applications - began

    10/12/15 6:36:10.712 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:10.712 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:10.733 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:11.003 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:11.302 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:11.490 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:11.674 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:11.785 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:11.985 PM lsd [272]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

    10/12/15 6:36:12.035 PM Spotlight [395]: the request of applications - completed in 1.8 seconds

    10/12/15 6:36:12.105 PM lsd [272]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

    10/12/15 6:36:12.193 PM lsd [272]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

    10/12/15 6:36:12.244 PM lsd [272]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

    10/12/15 6:36:12.283 PM lsd [272]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

    10/12/15 6:36:12.321 PM lsd [272]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

    10/12/15 6:36:12.375 PM lsd [272]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

    10/12/15 6:36:12.419 PM lsd [272]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

    10/12/15 6:36:12.438 PM lsd [272]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

    10/12/15 6:36:12.458 PM lsd [272]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

    10/12/15 6:36:12.472 PM lsd [272]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

    10/12/15 6:36:12.489 PM lsd [272]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

    10/12/15 6:36:13.315 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:13.384 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:13.598 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:13.670 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:14.171 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:14.416 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:14.650 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:14.996 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:15.214 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:15.713 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:15.894 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:16.070 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:16.151 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:16.309 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:36:25.107 PM lsd [272]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

    10/12/15 6:36:56.153 PM lsd [272]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

    10/12/15 6:36:56.176 PM lsd [272]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

    10/12/15 6:37:36.810 PM diskimages-helper [8124]: *-[NSMachPort handlePortMessage:]: a fall incoming message because the connection is not valid

    10/12/15 6:37:49.219 PM Google Chrome to support [8164]: could not set selectedTextBackgroundColor between (default)

    10/12/15 6:38:00.186 PM Google Chrome to support [8166]: could not set selectedTextBackgroundColor between (default)

    10/12/15 6:40:50.274 PM Keychain Access [8174]: unable to connect (_showExpiredCerts) out of (KeychainApp) (NSMenuItem): missing setter or instance variable

    10/12/15 6:41:01.543 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:41:01.799 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:41:02.130 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:41:02.408 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:41:02.785 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:41:03.064 PM Spotlight [395]: [QL] try again after preview was different for type

    10/12/15 6:41:03.141 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:41:15.798 PM lsd [272]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

    10/12/15 6:41:23.223 PM Console [8187]: unable to connect (_consoleX) out of (NSApplication) (ConsoleX): missing setter or instance variable

    10/12/15 6:42:26.107 PM QuickLookSatellite [8190]: could not get the extension of sandbox for path=/Users/*censored*/Library/Caches/com.apple.quicklook.satellite. Errno:1

    10/12/15 6:42:26.108 PM QuickLookSatellite [8190]: could not get the extension of sandbox for path=/Users/*censored*/Library/Caches/com.apple.quicklook.satellite. Errno:1

    10/12/15 6:42:30.364 PM QuickLookSatellite [8190]: in-[NSApplication (NSQuietSafeQuit) _updateCanQuitQuietlyAndSafely], _LSSetApplicationInformationItem (NSCanQuitQuietlyAndSafely) returned the error - 50

    10/12/15 6:42:56.187 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:42:56.385 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:42:56.611 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:42:56.725 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:42:56.873 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:42:56.995 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:42:57.038 PM Spotlight [395]: connection XPC has been invalidated

    10/12/15 6:54:48.119 PM Google Chrome to support [8230]: could not set selectedTextBackgroundColor between (default)

    10/12/15 6:59:27.941 PM Google Chrome to support [6952]: could not set selectedTextBackgroundColor between (default)

    After my computer off.

    10/12/15 10:14:04.007 PM identityservicesd [288]: : update enabled: No. (subjects: ())

    ))

    10/12/15 11:14:33.644 PM SpotlightNetHelper [401]: touch settings [SLSUGGESTIONS] lack of SAP in the bag

    10/12/15 11:14:33.779 PM SpotlightNetHelper [401]: [SLSUGGESTIONS] error bag-1009

    10/12/15 11:14:34.722 PM SpotlightNetHelper [401]: touch settings [SLSUGGESTIONS] lack of SAP in the bag

    10/12/15 11:14:36.391 PM SpotlightNetHelper [401]: [SLSUGGESTIONS] error bag - 1005

    10/12/15 11:14:40.190 PM SpotlightNetHelper [401]: touch settings [SLSUGGESTIONS] lack of SAP in the bag

    10/12/15 11:14:40.247 PM SpotlightNetHelper [401]: [SLSUGGESTIONS] error bag - 1005

    10/12/15 11:14:45.123 PM MIDIServer [2212]: Bluetooth MIDI driver begins...

    10/12/15 11:14:45.123 PM MIDIServer [2212]: driver Bluetooth finished from MIDI.

    10/12/15 11:14:45.125 PM sharingd [321]: 23:14:45.124: server from release for user 503 on wake

    10/12/15 11:14:45.399 PM MIDIServer [2212]: Bluetooth MIDI driver stops...

    10/12/15 11:14:45.399 PM MIDIServer [2212]: driver Bluetooth MIDI finished to stop.

    10/12/15 11:14:45.399 PM MIDIServer [2212]: Device Manager THE available state: NO-> YES

    10/12/15 11:14:45.400 PM MIDIServer [2212]: Manager Central available state: NO-> YES

    10/12/15 11:14:45.496 PM nbagent [744]: XPC activity invoked with State = 2

    10/12/15 11:14:45.699 PM sharingd [321]: 23:14:45.699: SDActivityAdvertiser::consoleUserChanged: stop for user 503 on logout

    10/12/15 11:14:46.059 PM sharingd [321]: 23:14:46.058: SDActivityAdvertiser::consoleUserChanged: stop for user 503 on logout

    10/12/15 11:15:01.127 PM MIDIServer [2212]: Device Manager THE state available: YES-> NO

    10/12/15 11:15:01.127 PM MIDIServer [2212]: Central available State Manager: YES-> NO

    This afternoon.

    11/12/15 12:33:50.793 PM sharingd [321]: 12:33:50.792: server from release for 503 on login user

    11/12/15 12:33:51.367 PM sharingd [321]: 12:33:51.366: server from release for 503 on login user

    11/12/15 12:33:51.386 PM MIDIServer [2212]: Bluetooth MIDI driver begins...

    11/12/15 12:33:51.388 PM MIDIServer [2212]: driver Bluetooth finished from MIDI.

    11/12/15 12:33:55.598 PM sharingd [321]: 12:33:55.597: server from release for user 503 on wake

    11/12/15 12:33:59.110 PM SpotlightNetHelper [401]: touch settings [SLSUGGESTIONS] lack of SAP in the bag

    11/12/15 12:33:59.369 PM SpotlightNetHelper [401]: [SLSUGGESTIONS] error bag - 1005

    11/12/15 12:34:07.848 PM accountsd [294]: AIDA Notification plugin running

    11/12/15 12:35:09.950 PM sharingd [321]: 12:35:09.949: Hello discovery started

    11/12/15 12:35:10.003 PM sharingd [321]: 12:35:10.002: Finder entered AirDrop

    11/12/15 12:35:10.021 PM sharingd [321]: 12:35:10.020: advertiser BTLE turned off

    11/12/15 12:35:43.507 PM sharingd [321]: 12:35:43.507: Hello discovery stopped

    11/12/15 12:35:43.508 PM sharingd [321]: 12:35:43.508: advertising BTLE arrested

    11/12/15 12:35:43.510 PM sharingd [321]: 12:35:43.509: Finder you leave AirDrop

    12:35:43.787 12/11/15 PM Google Chrome to support [9460]: could not set selectedTextBackgroundColor between (default)

    11/12/15 12:36:18.884 PM sharingd [321]: 12:36:18.883: Hello discovery started

    11/12/15 12:36:18.885 PM sharingd [321]: 12:36:18.884: Finder entered AirDrop

    11/12/15 12:36:18.913 PM sharingd [321]: 12:36:18.913: advertiser BTLE turned off

    11/12/15 12:36:21.574 PM sharingd [321]: 12:36:21.573: advertiser BTLE turned off

    11/12/15 12:36:21.574 PM sharingd [321]: 12:36:21.574: advertiser BTLE powered

    11/12/15 12:36:21.574 PM MIDIServer [2212]: Device Manager THE available state: NO-> YES

    11/12/15 12:36:21.574 PM sharingd [321]: 12:36:21.574: certificate No. Apple ID to advertise

    11/12/15 12:36:21.575 PM MIDIServer [2212]: Manager Central available state: NO-> YES

    11/12/15 12:36:21.575 PM sharingd [321]: 12:36:21.574: advertiser BTLE powered

    11/12/15 12:36:21.575 PM sharingd [321]: 12:36:21.575: certificate No. Apple ID to advertise

    11/12/15 12:36:21.589 PM sharingd [321]: 12:36:21.588: advertiser BTLE powered

    11/12/15 12:36:21.589 PM sharingd [321]: 12:36:21.589: certificate No. Apple ID to advertise

    11/12/15 12:36:21.589 PM sharingd [321]: 12:36:21.589: advertiser BTLE powered

    11/12/15 12:36:21.590 PM sharingd [321]: 12:36:21.589: certificate No. Apple ID to advertise

    11/12/15 12:36:21.590 PM sharingd [321]: 12:36:21.589: advertiser BTLE powered

    11/12/15 12:36:21.590 PM sharingd [321]: 12:36:21.589: certificate No. Apple ID to advertise

    11/12/15 12:36:21.748 PM sharingd [321]: 12:36:21.747: Hello discovery stopped

    11/12/15 12:36:21.748 PM sharingd [321]: 12:36:21.748: advertising BTLE arrested

    11/12/15 12:36:21.752 PM sharingd [321]: 12:36:21.752: Hello discovery started

    11/12/15 12:36:21.753 PM sharingd [321]: 12:36:21.752: advertiser BTLE powered

    11/12/15 12:36:21.753 PM sharingd [321]: 12:36:21.753: certificate No. Apple ID to advertise

    11/12/15 12:36:21.968 PM sharingd [321]: 12:36:21.968: created the new wormhole ID (58166110EE59)

    There is no virus. It was a scam.

Maybe you are looking for