MMIC access without IP address configuration. and without having to reboot.

Similar Questions

• My mouse stops working after 30 minutes of inactivity. How can I fix this without having to reboot my PC?

  original title: MY MOUSE STOPS WORKING AFTER PC IS IDEAL for 30 minutes. How can I fix this without having to reboot my pc

  I hang the mouse up to the wrong computer

  Suggestions:

  1. If you use a wireless mouse, check the battery.

  2. use a different mouse and see if you have the same problem in the SAME conditions (idle for 30 minutes). If you have not, then your mouse may be defective.

• Objects of scheme of access without having to specify the user.

  I just created a role in a scheme and assigned to certain privileges. Then, I created a user and granted the role to him. But as the newly created user is not the owner of the schema when I say a query select simle like this:
  
  SELECT EMLOYEENAME FROM EMPLOYEES
  
  I get the error "table or view does not exist. Is there a way I can wirte to refer to objects in this schema without having to identify the owner. For example, instead of writing to SCOTUS. I want to write just the EMPLOYEES EMPLOYEES.

  >
  So, I create SYNONYMS for all objects in the right of the schema? And also, I have to use these synonyms in all procedures, functions and views rather than their real names?
  >
  Yes, if the procedures are not owned by the user who owns objects.
  A procedure created by SCOTT didn't need to use the synonym to access the objects belonging to SCOTT.

  Then, if you issue

  GRANT EXECUTE ON scottProcedure1 TO DAVID
  

  Then the user DAVID can perform the Procedure1 scott without the need to have privileges on scott objects used by the procedure.

     EXEC SCOTT.PROCEDURE1;
  

  DAVID must use the schema to perform the procedure, unless you create a synonym for the procedure.

• Error message: Ethernet is not a valid ip address configuration and cannot connect to the Internet after installing Windows 8.

  Original title: Internet not working after installing Windows 8. Help, please

  I installed Windows 8 a week before, which had Windows Vista. When I was with Vista, I had no problem with the Internet, I had. But shortly after I installed Windows 8, the problem began. The connection is hardly 2 minutes. In addition, it is not navigate beyond my home page. After troubleshooting the result came as Ethernet is not a valid ip address configuration. It makes me really frustrated. After all, I was looking forward to navigate in windows 8, this problem makes me think really bad. If someone could help me, it will be grateful to you.

  Manorajan respected,

  I too had d same problem but I solved it later on myself.
  Here's how to: -.
  1-make sure you have intel network driver I installed your windows it pc. Download (on any other pc and transfer and install in it) and install it in your pc respective windows 8. Here is the link to download:-http://drivers.softpedia.com/get/NETWORK-CARD/INTEL/Intel-Network-Adapter-Driver-172-for-Windows-8.shtml
  Den DOWNLOAD realtek lan driver here to install http://drivers.softpedia.com/get/NETWORK-CARD/REALTEK/Intel-Realtek-LAN-Driver-80030730-for-Windows-8.shtml..if in the installation of theres no error ignore it... do not panic and reinstall... as it is already installed

  2 - unplug your LAN cable and Wi - Fi

  3 - go to network and sharing den center left side d click on change adapter settings clik left on the network card intel

  4-go to "Ethernet Adapter local area connection' properties and Deselect"Internet Protocol Version 6 (TCP/IPv6) "

  "5 - Select" ""Protocol Internet Version 4 (TCP/IPv4) '

  Press the properties button

  6 - Select "use the following IP address:" option and set this ips

  IP = "ip address".

  subnet mask = 255.255.255.0

  default gateway = your ip from the router (you can recheck all say on any other pc having a successful conection even wid tell by checking the properties of dial-up connection or any smart phone like any iphone or android mobile, if it is used as a wifi too in led staus/properties to your respective wifi name)

  7. in the second section select "use the following DNS server address:"

  Set "Server DNS PreferAlternate:" your router ip that entered u in "default gateway of" this. " pinterested ok and try to connect in wireless lan

• I need access to the address book and the internal files path

  I had to update windows, then Thunderbird. I'm trying to restore my address book and such internal records only sent and saved. I have backup, but I can't find the files into it.

  Tried several times but the data must be stored somewhere else.
  Thanks for the interest if. Looks like I have lost.

• Updating of the library to the user without having to reboot?

  Does anyone know a way to refresh the user library without having to restart Labview?  I searched the forum and help to LV, but I do not see this feature...

  Thank you

  Chad

  I think that if you go to tools > advanced > Edit Palette defined LabVIEW recharge pallets.  I did once before, I just don't remember exactly if that's what I was doing.

• You can restart nfs storage WITHOUT having to reboot ESX host?

  Hi community

  I wanted to know what your experience has been reset to the nfs storage devices WITHOUT having to restart the ESX servers. I can stop the virtual machines that use the storage, but would like to avoid off ESX hosts as they require a visit to the data center for put in operation and I can do all the rest of the House.

  My options are either then restart the ESX host (that I can do it remotely of course) or the ESX Server restores in the nfs storage when it is up?

  This is the first time such a restart will be required so I use

  this as a learning experience and the VMs on those ESX hosts are not

  criticism.  (although don't tell users which.) )

  Thanks in advance

  Yes, of course you can.

  ESXes automatically reverts to the storage.

  ---

  MCSA, MCTS Hyper-V, VCP 3/4, VMware vExpert

  http://blog.vadmin.ru

• How do I rescan fiber channel without having to reboot host

  Hello

  I have a few questions regarding the removal of LUNS and vmotion.  My first question is that I can't seem to be able to delete a LUN in vsphere client 5.  I get the error message but I think it's because guests can still see the LUN.  I unpresented this LUN in command mode and deleted.  Now in vsphere client, the logic unit number shows idle and when I do a new scan task's not going anywhere.  It seems that the host cannot see that LUN more and is having a heart attack.  The worst is that vmotion does not work when this happens.  So to fix this I had to reboot the esx host.  Once the host is back online this LUN disappeared and vmotion works again.

  Now my problem is that I have 32 esx host and I don't want to have to restart all the and the fact that vmontion does not work I can not migrate the virtual machine between hosts.  Is there a way to force guests to rescan the channels fiber so that they will not see the deleted LUN more or is there another solution for this?

  Thanks in advance

  It sounds as if you did not remove the VMFS datastore before unpresenting/remove the logic unit number!

  There are different as KB to remove a datasbase in vCenter Server data store, but those who are for v4.x and I'm not sure if they apply to the v5.0 as well (e.g. http://kb.vmware.com/kb/1026661) maybe a restart of management on hosts agents will cancel the deleted LUN, have you tried this already?

  You can also take a look at best practices: how to properly remove a unit logic of an ESX host number

  André

• IDrac access attached server monitor/keyboard without having to reboot

  Hello

  I have connected a keyboard and a screen to a R730xd server and would like to access iDrac. However, I see the login prompt of the OS installed.

  I have found no way to switch to the iDrac without rebooting. I'm sure it must be possible somehow?

  Best regards

  Brian

  You can share the details of the server and the Linux operating system that is installed on the server? One way to access host OS iDRAC is by installing racadm software. After that, you can run racadm commands and configure iDRAC.

  See below for more details on racadm

  http://en.community.Dell.com/TechCenter/systems-management/w/wiki/3205.racadm-command-line-interface-for-DRAC

• You want to use applications on a computer in the library when you travel. I can access without having to download it to their computer?

  You want to use applications on a computer in the library when I travel out of town. Is this possible without download on computer?

  It is unlikely.  You will need to download and install applications on the machine, and it is doubtful that you might infer from this ability.

• Setting monitor in sleep mode and I can't wake him up without having to reboot.

  I can't wake up my monitor after he starts in mode 'sleep'.  I have to restart.  It usually takes several resets to get the monitor to stay.  I put the controls for "never sleep", but he did it anyway.  This has happened after that the computer has not been used for about 4 weeks.

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Try to reset the default power Plan settings. information is at the link above.

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  And how to solve problems in Standby Mode is at the link above.

  And read the information of 'Related links', too.

  See you soon.

  Mick Murphy - Microsoft partner

• Can I change the RAM available on a virtual machine without having to reboot?

  I would like to know if there is an option to change the RAM available on a virtual machine without restarting the virtual machine. I saw this old news item that says that it is

  possible (http://news.cnet.com/8301-1001_3-10044031-92.html), but I don't know how to do it. Any suggestions?

  Thanks in advance.

  Arne post, called PowerCLI: toggle the function add Hot VMs, shows how.

• I would like to know how I can make firefox stop the message that I have to restart my browser to complete the update without having to reboot?

  I would like to know how I can make firefox stop the message that I have to restart my browser to complete the update? I'll restart later, but does not wish to do so immediately. I can
  Click on the cross, but after a few minutes the message is back and I can't figure out how to stop
  It's popping every few minutes.

  You need to restart it.

• If I shut down menu + navigation bars, how can recover them without having to reboot my pc?

  (I use windows + firefox browser and what I see is my actual window + above the window, there is only the tab bar and above the tab bar of course the firefox on/of/change the size of the window-functions)

  For more information about how to restore the menus, see https://support.mozilla.com/kb/menu+bar+is+missing

• How can I change the current user to another user without having to reboot. There is no user button__ change

  don't start button... but when I go newspaper microsoft and menu appears.  There is no option or change user run

  Hello audrey r.

  Thank you for visiting the Microsoft answers community.

  In addition to N3b 2.0, you can try following the steps on this thread, but you will notice that the actual measurements are to disable, you will need to reactivate.

  Additional information can be found here.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.