Mobile network/data does not work

Similar Questions

• Update my wireless network device does not work after installation of Software Distribution Service 3.0

  After the installation of Software Distribution Service 3.0 update my wireless network camera does not work how do I uninstall Software Distribution Service 3.0

  How did you receive the update?

  Was it via Windows Update or Microsoft Update?

  Before the changes are made to your computer, the system restore points are made. This is so that you can go back in case an update causes problems.

  Follow these steps:

  1. click on the Start button

  2. click on accessories

  3. click on system tools

  4. click on system restore

  5. click on next

  6. in the calendar that appears, select the one which refers to Software Distribution Service 3.0 and click Next

  After the collection of certain data, the computer will restart, and the update will be gone.

  Hope this helps

  Post back if necessary

  ___________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Wireless network adapter does not work on my Satellite A200

  Hello

  My wireless network adapter does not work under Vista. If I press FN + F8 nothing happens. Wireless communication is always offline.

  What can I do?

  Details:
  Typ: Atheros AR5008X Version: 7.2.0.164
  Laptop Satellite 200
  PSAE6E

  Please help me!
  Thanks in advance!

  Phil

  BIOS bug? I don t think so

  First of all, you must make sure that this isn't a hardware problem. In this case, insert the Toshiba Recovery CD and reinstall the operating system of this device. This will outline the laptop to factory settings. Notes; This would format the whole HARD drive.

  After the new installation, you must activate the WLan switch on the side of books, and you can then use the switch button FN + F8 to select the WiFi network.

  I assume that you have already configured your Wlan router. So the same settings such as the SSID, encryption of WLan, etc. must be defined on the laptop too.

• Network connection does not work after reinstalling Windows XP.

  Original title: problems with reinstalling XP.

  I had re format and re install windows xp but now my network connection does not work.  I have no IP address, even if my router and the pc are on DHCP. Device Manager tells me that the controller Ethrnet on the motherboard has no drivers, but I can't find a driver.  Any thoughts appreciated.

  Hi John Fisher_888,.

  You can download & install the drivers for the adapter from this link & check if it helps

  http://support.Dell.com/support/downloads/devices.aspx?c=us&l=en&s=Gen&SystemID=DIM_PNT_P4_8400&OS=WW1&OSL=en

  Hope the helps of information.
  Please post back and we do know.

• The ADF Mobile preview pane does not work under Windows 8.

  The ADF Mobile preview pane does not work under Windows 8 64-bit even I use Jdeveloper 11.1.2.4.0 version, but I use windows 7 64-bit or windows xp works fine.

  How to solve this problem, please.

  Thank you!
  

  Hello

  I installed JDeveloper 11.1.2.4 on my machine Windows 8 and the extension of the ADF Mobile. I can open the ADF Mobile Viewer. There is therefore no problem with this on Windows 8. I used the generic facility, which is that I have installed the JDK and then run the command for installing JDeveloper Java-jar.

  Frank

• Using the function of scan macOS Sierra HP Officejet 7300 series network printer does not work; He had no problem with El Capitan...

  Printer HP Officejet 7300 network series that allows to work flawlessly with El Capitan does not work after the upgrade to Sierra.

  With macOS Sierra, when used as a network print service printer works fine however scan does not work. Programs like the Image Capture, HP Easy Scan etc does not see the printer. However, if the printer is directly connected to the Macbook Pro using the usb cable, a new printer is added to the list of printers (it shows print and scan functions while the printer network in the list shows only printing function) and the scanner works well with Image Capture, etc. If the usb cable is removed disconnects this printer in the list and there is no way to turn it on. I have the latest update for the printer installed from the App store. It looks like a driver issue, but I wonder if there is a work around for this problem...

  Open Preview.app. Under file in the menu bar, you see import of 'name of your scanner?

• Call to mobile and lanphone does not work

  Yesterday, I bought a subscription to appeal to Indian mobile and lan phone, but still I can't do my Skype call.

  I use Skype in my iPhone 5 s

  Please let me know what the problem is.

  Concerning

  Nikhil

  I had the chance to speak skupe customer and fix us the problem.

  I use Skype of UAE, here Skype been blocked before but now they open the Skype Web site we also make Skype-to-Skype calls, because of this port blocking the call phones and mobile does not work.

  So I used VPN over come this problem. Now I can make the Skype call to any mobile and lanphone.

  Hope this will help others.

  Concerning

  Nikhil

• Wireless network card does not work

  Pavilion dv6-6c01eo (A7Q69EA)
  
  Windows 7 64 bit
  
  Network controller is missing
  
  Have formatted the computer with a disc of CD windos 7 64 bit.
  
  Drivers updated via the HP Web site, downloaded all four pilots were of a single function, and it is sp54998.exe [1/1, 5.7 M] works. 3 other updates, sp55714.exe [1/1, 279.13 M] sp55805.exe [1/1, 11.55 M] sp56036.exe [1/1, 10.77 M] does not work. I have internet via an Ethernet cable, but I don't have internet through wireless netverk, it won't work because I have no driver for network controller. I need to download these drivers, where they work.

  Hello:

  Please click on the NIC in Device Manager.

  Then click on the Details tab.

  In the property drop-down list, select the second element (Hardware ID).

  After the first string of characters you see in the window.

  Who will be the ID of the model of the network adapter, and I'll send you the link to the drivers you need.

  HP is not sometimes the drivers for the cards they put in Notepad on the support page and pilot.

  Paul

• Freecom network drive does not work in Windows 7

  My network of Freecom 400 Gb, LAN + USB 2.0 drive, works fine in Windows XP.

  After installation of the software (for XP) Windows 7 recognizes the drive (FND) in the network, but clicking on the drive reported an error.
  When you try to 'Add and remove mapped actions' drivers software the network drive does not.

  Unfortunately, Freecom doesn't give not any medium.

  On some forums, I found a 'solution' that did not work for me: Start - computer - Network\\FND\Public

  If anyone using a Freecom network drive has found a solution, it could make me very happy to cummunicate this for me.

  Johan Dulac

  Hello

  1. What is the exact model of the Freecom Network drive number?

  2. What is the full and exact error message?

  I suggest you to check if the drive is compatible Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  I would also refer the link for Freecom support:

  http://www.Freecom.com/support

  http://www.freecomforum.com/

• bluetooth mobile keyboard wedge does not work before the beginning of the window

  Hello Microsoft,

  I bought the mobile bluetooth keyboard dock recently.
  It works not in the BIOS and CMOS to move but to start the window, everything is ok.
  I use dougle bluetooth to connect this with my computer keyboard.
  I already activated the USB keyboard in the CMOS using old PS2 Keyboard. But it does not work.
  Please help me to use my keyboard before the beginning of the window.
  Respect,
  Arkar

  Hello

  Which machine or laptop you are using.,.
  some of the model require Bluetooth patch file to complete, that patch file will be given by the laptop or desktop vendor, please contact their tech support toll free number.check with Bluetooth mouse also

• network connection does not work on the static ip address

  Hello:

  I am newbie for vmware, recently, I've converted a windows 2008 virtual domain controller, after the fact, everything works fine on the IP of the DHCP, but after I change the static ip address, I can always ping the IP but the DC lost its functionality and internet does not work.

  Any idea or help that can make my static ip, would be very grateful if someone can help! Here is my network configuration:

  

  Hello and welcome to the community

  There are a few things to consider in this regard

  First of all, it is not a simple task to change the IP address a domain controller, so I don't know what procedure you followed

  Just in case, here is the procedure to do so:

  http://TechNet.Microsoft.com/en-us/library/cc794931 (WS.10) .aspx

  Second of all, to virtualize a domain controller also has a specific process that must be followed.

  Most of the people prefer to create a new virtual domain controller and move all of the above roles.

  Here are two rounds, that you might find useful:

  http://communities.VMware.com/thread/209813

  http://communities.VMware.com/thread/209889

  Don't forget to assign points if you find this useful/correct

• Network Bridge does not work after copying on another system

  Hello

  I use VMware Server 1. I created a Fedora 9 guest operating system. I used bridged networks. I've edited/etc/sysconfig/network-script/ifcfg-eth0 and assigned static IP. It works very well.

  I copied the image to a different system and it turned. But now the networking does not work. It shows as instead of eth0 eth1. change the/etc/sysconfig/network-script/ifcfg-eth0 once again restores the networking. is their anyway to maintain the previous configuration after copying.

  -Arindam

  Hello.

  The movement will probably cause a new MAC address to be generated.  Check out KB 507 and 49 KB for more information on this. Try the supply of machinery, or what is your ultimate goal here?

  Good luck!

• Satellite C70-B-306 - local network connection does not work

  Hello

  I have a problem with my internet connection, Wi - Fi works fine but when I put the cable with connector rj45 of the connection does not work.
  I see that my laptop want to connect but then the connection is lost again en it says cable is not connected. Who goes on and out.

  It passes between the cable and internet Wi - Fi connection. The cable worked fine on my desktop.
  What can I do? I have the laptop 1 week.

  René

  Hello

  What model of laptop do you have? Do you use the laptop with the original operating system preinstalled?

  Open Device Manager and check if the LAN CSA is listed and enabled correctly.

• Pavilion dv6 LY090UA #ABC: I reinstalled Windows 7 and my wireless network adapter does not work

  I just reinstalled windows 7 and I can not get my work a wireless adapter. I went in all directions looking for drivers to use and everyone I try does not work.

  I tried:

  Atheros Wireless LAN Driver 2011

  I saw someone talking about DriveTheLife in another forum and decided to try it.

  IT WORKS LIKE MAGIC, I don't know how he did it but he found and installed all the drivers I needed!

• . Error... my clock and date does not work...

  Hello

  my clock and date does not, that why I can't update my pc or I can not install updates... Please help me

  Thank you.

  Do you mean that you can not set the date & time on the tray system 'clock '? Or you can, but it changes when you reboot the machine?

  It is a laptop or desktop?