Mobile tables 1 d average

Similar Questions

• Mobile tables

  I find the mobile tables (cuttin gand pasting) to be difficult.  The only way that I can't seem to select the cutting table is to find the text of the symbol of his placement in the document, and then click and drag on the symbol until the table is presented as highlighted.  I have then cut and paste it elsewhere.  The problem is that I find myself usually cut and paste one or more adjacent characters in the symbol table, such as line breaks.  I then have to add the characters accidentally cut at the location and remove the extra characters in the location of the dough.  Is there a better way to move JUST the table?

  I use 'float' for the placement of the tables.  Another problem is trying to find the place where the table is inserted into the text.  If I have several tables on the same page, I point out the various symbols to text position insert in the text until the desired table is highlighted.  Why can I not just use the mouse to drag onto the table to select it?  If I try to do this, he simply selects rows of the table.

  Thanks in advance!

  Well what do you know. I tried on a table without a title and has no

  realizing that the title would not come with her. Then I looked up the

  shortcuts to select a table:

  1. these t t h

  2 control-triple-click in the table (it takes a little finesse to)

  get the timing right)

• ADF Mobile - Table attached views

  How to pass the new AMX view table as FK PK.

  Don't know how to do in this regard.

  Should we indicate a child view display criteria with Bind Variable from parent PK Table. If so, how.    (e.g. WHERE parent.pk = child.fk)

  Don't want to have a form of parameter, just taking the PK of the parent used as FK to child, like a Mobile view.

  User,

  Always mention your JDev version. Check out this blog: Andrejus Baranovskis Blog: Service Web master / detail ADF BC for ADF Mobile

  Arun-

• Mobile tables for Encrypted tablespace.

  Hello

  I use 11.2.0.3.0 version of oracle. We intend to move some ~ 40 tables/indexes again encrypted tablespace for transparent encryption of data (transparent data encryption). Currently three tables have the size ~ 30 GB and have a ~ 800 GB other have < 2 GB in size.  And tables/indexes are placed in different areas of storage.

  So my question is, if I should create no. areas table encrypted as it was before as tablespace unencrypted

  or

  I should create an encrypted tablespace that invade all tables/indexes and it does not affect the performance? Need Suggestion.

  A tablespace or forty tablespaces? You may want to tablespaces with a size different uniform measure if your objects have very different sizes and growth rates. Otherwise I wouldn't think that he would have no effect on performance. It is purely a matter of administrative convenience.

• Mobile tables to new storage spaces

  Hello
  
  If the database is to climb up or down by moving the tables to new storage spaces in EBS

  Salvation;

  Please see:
  Note: 147356.1 - how to pass arrays of one Tablespace to another
  Note: 158162.1 - how to move all the Tables a user to a different Tablespace
  Note: 151588.1 - how to reorganize a table

  See also:
  Re: How to move a table to the other schema

  PS: Please don't forget to change the status thread answer whether it is possible when believe you your thread replied, he pretend to wasting time in other forums users while they are looking outstanding which is not answered, thank you for understanding

  Respect of
  HELIOS

• Mobile table column

  I am able to add a column to a table through SQL Workshop Object Explorer. The column is added at the end of the table.
  
  However, I don't see any way to move the column added to a position in the table. It is possible to move a table column in the Apex, or do I have to use another tool?

  Hello

  You can't change order of column in the tables. New columns always comes last. And it's not Apex, the Oracle database operation.

  If you rearrange the columns, change the name of the table.
  Create the new table with the old order of columns name and correct.
  Insert the new renamed table table data and then drop a renamed table.

  Kind regards
  Jari

• Mobile table

  Hello
  While size table to a tablespace ts another, where we can check how his were inappropriate.

  Salvation;

  I use under request;

  SELECT file_name, BYTES / 1024 / 1024 mb
  FROM dba_data_files
  WHERE nom_tablespace = 'xxx '.
  ORDER BY file_name;

  Respect of
  HELIOS

• average of consecutive items to table

  HI, I want to find the number of consecutive items in table, calculate the average of each segment row, output should be towing tables as shown in the picture attatched.

  Array2 is the number of consecutive items in each segment.

  array3 indicates the average of the consecutive elements in each segment.

  

  Your average of the 11,12,13 and 21,22 are incorrect...

  Use a loop For iteration in the first table and shift registers allows you to keep a table of previous values in memory. Use this table to previous values to compare the current value to the previous. If there is a deviation of more than 1, the average of the output array and disable it. Write the new value in the registry to offset.

  Here's what I mean: (it can be cleaned up a bit, but it works)

  

• Tables average Sub

  Hello

  I try to have a vi that receives an array of file, and then built the sup boards (according to the FPS/mid-range everything), then take the average, detects the difference between each data point and count the number of times where the difference is greater than the threshold. Please see the attached file - my block diagram.

  At this point, the vi is running but the is a bug in the code that I can't find :-(.

  When I run it on a counter of data sample returned ~ 350 where it suppose to be only 3.

  I will appreciate if you can take a look.

  Thank you

  PS.

  I am happy to download the vi and an example of data file if necessary.

  simply_me,

  You take a subset of the table, get the average which seems ok.  But then understand you the difference between the average and all you started with instead of the subset of the array that allowing you to calculate the average.  Guess you have to do this.

  

• Average table in a recursive way

  Hello

  I need a way to calculate the average of continuous 3 x 10 table without doing the math on all values each time.

  I have blocks of 3 x 10 table as input (incoming continuously). First round, t1, I want to take the average of each line, so 3 x 1 table called 'current average '. It will be inserted into a 2d array called "all means".

  The next iteration, t2, I'll have another block of 3 x 10 of incoming data. I will start again the average and insert it into "all means". Now, I want to take the average of the lines of "all means", so that the average of all the data that I currently have, if the average of t1 and t2.

  This method works, except that since I am constantly introduce into array, the size increases and slows everything down.

  Ideally, I want to have only 2 columns of table data at a point in the "all means". The old average calculated previously and the new block of data. So I need a way to save the "means old" and replacing it with the data in a 2d array.

  I have attached a very simple doagram of what I have... it would be in a loop running continuously.

  
  

• How to make the Mobile friendly tables or convert

  Hi again! I have an obvious problem with that I think has a very obvious solution that I already know, but I thought I'd come here first in the hopes that I could save time. I've been remodeling an older site to have a newer look and be mobile friendly as well. Some of the pages on this site use tables, I prefer to use the divs because they are easier to change the layout if necessary for phone or tablet. As it is, there are a lot of pages using complex tables, those who have been on the site before I even and resumed the work on this site. So my question... Is it possible to make friendly mobile tables? If not, is there a way to convert rapidly about 150 pages of html to use divs instead of tables outside to manually enter in each page and gradually replace each part of the table?

  Here is the table that I'm trying to make mobile friendly or convert:

  Rental management company - < this link here.

  My main reason for this request here is because it would take me a VERY LONG time to go through each page one by one for the tables for divs. Maybe someone here has a solution? As always, any help is greatly appreciated.

  The tables are a great challenge in the propulsion back.  At one point, they stop to resize.  Look at solutions of Bootstrap for sensitive Tables.

  http://GetBootstrap.com/CSS/#tables-responsive

  Nancy O.

• Copy of columns part 2 leaves to find various averages

  In numbers, I'm trying to copy a column of figures to join other columns of the part on a new worksheet or table to required averages. No matter how I copy the result is just an a column to zero. I followed the instructions on aid for the copy with the same result.

  Hi male disputed apple,.

  No matter how I copy the result is just an a column to zero.

  More information, will lead to a solution.

  What is your overall goal?

  Which copy methods tried?

  What formulas produce results?

  Error messages?

  A screenshot is going to paint a thousand words.

  Kind regards

  Ian.

• With an average of groups of cells

  Hi, I have a question that might be a simple, but I am struggling to find a response.

  I'm looking for using blocks of cells.  The goal is to take a large group of experimental data with many different reproductions by treatment and turn it into averages by treatment.  Here's a simplified example: A1 to A3 contains data replication of treatment while A4 to A6 contains data for the next treatment, etc.  A1: a3 must be averaged and put in a new table for his special treatment.  Ditto for A4: A6, etc..  I understand how to do manually (= average(A1:A3)), (average(A4:A6) =), etc. for each cell in the new table.  However, it is simply too long for this amount of data.

  So I tried to set the function in the first cell export and dragging the AutoFill / the rest but this leads to a difference of 1 cell of the data sources.  In this example, I need to exclude the three previous average cells next and use only three cells.

  Is there a way to auto-fill the average function in groups of source cells?  If so, can you recommend the procedure?

  Maybe I'm looking just to the question in the wrong way.

  Thank you for your help.

  The f

  If I understand correctly, you could do something like this:

  

  The formula in A2 of the summary table is:

  = AVERAGE (OFFSET (data: $A$ 1, 3 * ROW (−5, 0, 3)))

  If your data are in groups of 4 then the formula would be:

  = AVERAGE (OFFSET (data: $A$ 1, 4 * ROW (−7, 0, 4)))

  Group 5:

  = AVERAGE (OFFSET (data: $A$ 1, 5 * ROW (−9, 0, 5)))

  etc.

  The second parameter (number of data points per set) * rangee() - (a constant), must be assessed at 1 when rangee() is set to 2.

  The last parameter is the number of data points per set.

  The first line of the data table is a header row.

  For more information about this use of the OFFSET, see the second to the last example here.  If you work with large tables you can select averages derived, command + c to copy, edit > paste formula results to remove the forms when you are sure to have the desired result. The reason is that the OFFSET is a so-called "volatile" function which can make your sluggish document.

  SG

• How do the average of the last 5 values of a column as new values automatically entered?

  If the issue is not clear for you, here's a site I found that teaches you how do it on excel. ml https://www.extendoffice.com/documents/Excel/2533-Excel-average-last-5-values.HT    I can't find the corresponding method on the good numbers. Thank you for your response in advance :-)

  Hi Z_J,

  This number approach pulls the last 5 (low) values of table 1 in another table where the average can be calculated.

  Step 1. Add line numbers in column A of table 1. This gives a way for table 1-1 to extract the last 5 values.

  

  Formula in A2 (and fill down

  = ROW()

  Step 2.

  In table 1-1, the formula in A6 estimated the maximum line in table 1

  = MAX (Table 1::A)

  The formula in A5 (and filling up)

  = A6−1

  Formula in B2 of table 1-1 (and fill down) using VLOOKUP to find a match for each line number in table 1-1 and get the value out of this line in table 1.

  = VLOOKUP(A2,Table 1::A:B,2,FALSE)

  

  Step 3.

  Now add another row (and insert a new value) to the lower part of table 1

  

  Lines 3 to 7 are now drawn.

  Ranger by hiding some columns

  

  Kind regards

  Ian.

• Buffer, average or what?

  I'm looking for advice on how to shoot some of the noise in my signal.  Two ways, that I thought would be to build a buffer or average of the input on the appropriate amount of time signal.  Any ideas?  Examples?  Take a look at the attachment and see if you have other ideas... Thanks for your help.

  Bradley

  It would be easier to watch if you have validated your real VI.  In this way, we can see some of the parameters in the Express VI.

  Without seeing the code, my proposal is as follows.  You have a dynamic data type of multiple streams of data.  One of them is converted into a table.  The average which takes so you end up with a single value.  Who gets converted to a dynamic data type, merged with other signals and traces.  Now if you were plotting 10 samples per iteration before, now you draw 10 by most flow data, but only 1 sample for the medium-sized stream.  Then he falls the waveform table.

  Please post your VI.  First, run it to collect certain data.  Then go to edit use current default values.  Save, and then publish it.  Now we can see your VI with real data it to so we can inspect.