mod_rewrite mysql connection break

Similar Questions

• mod_rewrite mysql connection breaks

  It was recommended to me that I repost cela in this forum instead of the forum discussions general DW.

  The following .htaccess file is break my mysql connection in DW CS3 amd CS5.5. I've isolated the rewrite rule which passes two parameters to index.php as the cause of the problem, but I don't seem to be able to exclude the directory of links of the rewrite rule without breaking the behavior of the web site that the htaccess file works very well with the site.

  Options + FollowSymLinks
  RewriteEngine on
  RewriteRule ^(assets|) Connections | CSS | docs | images | Inc. | include | menus | modules | module s_shared: js)($|/) - [L]
  RewriteRule ^ ([^ /] *) / ([^ /] *) /? $ index.php? webpage = $1 & article = $2 [L, QSA, NC]
  RewriteRule ^ ([^ /] *) /? index.php? webpage = $1 $ [NC, QSA, L]

  Here is the same code with a few explanations

  Options + FollowSymLinks
  RewriteEngine on

  # The next line should be out of the directory of links. It works in the browser when I go directly to the login script
  RewriteRule ^(Connections|css|docs|images|inc|include|menus|modules) ($| /)-[L]

  #The below line passes the page and a second parameter. This is what breaks the DB connection!
  RewriteRule ^ ([^ /] *) / ([^ /] *) /? $ index.php? webpage = $1 & article = $2 [L, QSA, NC]
  #The line below is for pages that do not require an extra parameter and does NOT break the db connection in DW
  RewriteRule ^ ([^ /] *) /? index.php? webpage = $1 $ [NC, QSA, L]

  Someone can help me to get a mod_rewrite htaccess file that accomplishes what we do it but does not break my connection to mysql DW? With this in place .htaccess file, I receive data = > Tables = > None, and if I try to test the connection, I get an error not identified, BUT the web site works.

  P. S.

  I also tried assourted as rewrite conditions

  RewriteCond% {REQUEST_URI}! /Connections/*.$

  without a bit of luck.

  When I delete the second last line, the DB connection works. I tried a number of bugs, but not joy.

  SOLVED!

  Nobody seemed to have an answer for the past two years, but I found an answer today.

  INCLUDE _mmServerScripts in the list of EXCLUDED directories

  RewriteRule ^(assets|) Connections | CSS | docs | images | Inc. | include | menus | modules | s_shared module | JS | ( _mmServerScripts) ($|/) - [L]

  Refresh and it works.

• Problem with Web Builder and MySQL connection

  Hello

  I created a web service VI (see picture attached) to connect my Web Builder application with a MySQL database. The problem is that I get nothing on my exit signs during the call to the web service VI.

  Some tests I've done:

  (1) this web service VI works perfectly (I mean indicators 'value', 'status' and 'data_hora' give the desired result) when the VI run directly through LabVIEW. MySQL connection and my VI are OK...

  (2) I know my web service VI was successfully built and deployed because the indicators give me some value if I sign something for them other than my SQL output

  (for example: if I put a string constant "Hello" on indicator "valor" I get "Hello" when calling the web service VI)

  I suppose that the database connectivity kit is not supported when a VI is integrated with a web service VI. In my case, kit screws are inside the subVIs 'start', 'exec 2d' and 'stop' showed in the picture as an attachment.

  Any idea?

  Thank you

  Marcelo

  

  I'm using LabVIEW 2001 Wesley, but I solved my problem.

  It was just a MySQL data source problem: I just had to add my info DB through C:\Windows\SysWOW64\odbcad32.exe.

  Thank you

  Marcelo

• MySQL connection does not work

  I created a php file. I also created a database with a username and password in phpMyadmin on my remote Web server. I used Dreamweaver "Manage Sites" to set up distance information and the testing server. These work well. However, when I try to set up the MySQL and test the connection, I get the message error "an unidentified error has occurred." I have many calls using the Web server and they say that I have everything set up very well. However, I still get the same error message. I have spent hours trying to solve this problem and would be very grateful for any help.

  I finally got the MySQL connection to operate. After a lot of changes for different settings, I discovered tonight that I had a spelling error in the prefix field of the URL to the testing server.

• Satellite L655-1CJ - wireless connection breaks of 10 - 20 times a day

  My breaks wireless L655-1CJ 10 - 20 times a day. So I have to restart the laptop to connect again.

  We have a small office network and only my laptop has this problem.

  I use Windows 7.

  I downloaded all the drivers modem and WiFi official and it helps o.

  We brought to the official repair function and they say that this drug is OK.

  Someone has an idea of what could be the problem?

  Post edited by: Macius

  Have you noticed this battery mode only or also if the laptop is plugged in.
  In battery mode, I would recommend disabling the power saving for the WLan.
  Also, I recommend this test with different routers.

  Maybe his router problem

• LabSQL to MySQL connection string syntax

  Hi all

  I'm just starting using labSQL and MySQL and cannot even connect to the database, I want to start practicing. I tried to write my own code and use the code example, but I can't get a connection to a database. The error is still "an Exception occurred at ADODB. Connection: The operation is not allowed when the object is closed. Help path is C:\Windows\HELP\ADO270. CHM and context in ADO Execute.vi connection 1240653-> Simple.vi". I've set up a system DSN using the MySQL ODBC Unicode 5.2 driver and I'm under Labview 2012 with MySQL Workbench/5.6 Server 5.2. I really just need to know the syntax of the connection string that you pass in the ADO connection open vi.

  Thank you in advance.

  
  

• MySQL connection error

  Hello

  I'm new to labview and database programming. I am trying to recover data from mysql database and show it on labview. I get an error message and I don't know how to fix it.

  Please advice kindly. Thank you.

  FOR INFO:

  I use:

  32-bit labview 2012 and

  64-bit ODBC connector

  

  

  

  If you use 32-bit LabVIEW, you must use the 32-bit ODBC connector.

  Install the 32-bit connector and then run the 32-bit version of ODBC (c:\Windows\SysWOW64\odbcad32.exe) administration tool and configure your connection from there.

• Best way to configure MySQL connection scripts for hosts the remote and

  I'm curious to know if there is an effective way to do it.  I have my local MAMP server test, then a remote server, both with MySQL.  Pages requiring PHP and databases at the start with a link to my login script.  However, the connection to my local details vary my remote servers.  I have two login scripts and need to change the link of each page when I download, or have a login script and change it directly whenever I'm working between the two.

  How will people work effectively in environments the and remote?

  The login script does not have to be in your PHP pages. Not good security. It should be above the root of the Web site, where it is not accessible via http. The name of the file containing the script of the same for the remote and local, even if the content is different.

  Then your PHP pages call a file with the same name and you don't need to change anything.

  require_once '... /... / / here. Connection.php';

  Also note that the file name begins with a period that allows to hide.

• PHP and MySQL Connection problem

  I'm doing a PHP MySQL on a connection to the remote server in Dreamwesaver CS3.

  When I enter the information (host, user, password, etc.) and hit TEST, I get the following error message.

  "Access is denied. The file exists may not, or there could be a permission problem. Make sure you have permission on the server and the server is properly configured. »

  I know how to work the user, password, etc., I can access the MySQL database with other software.

  I checked with my host and they say that there is no permission problem on their end.

  I checked the settings on the Test Server page in the configuration of a Site and everything looks correct and works there.

  I've seen this particular problem described in other messages of the forum (even if there are a LOT of comments on this topic!).

  Any help would be appreciated.

  pabirds, I had the same problem. Here's the solution that worked for me:

  1. make sure that you have clicked on the tab Advanced in the Definition of Site pane, and then

  2. Select testing serverin the list on the left side of the pane, and then

  3. set Host FTP on host your site, your e.g. ftp.yoursite.com or ftp.yoursite.eu, then

  4. set the host directory according to the hierarchy of your hosting service, it will probably be something like: areas / www / htdocs or /. To determine this, when you have window Dreamweaver files open in two columns, expand the root of your site. Then

  5. set your prefix on the URL of the root of your site, then your example http://www.yoursite.com/ or http://www.yoursite.eu/,

  6. use your connection user/pass combination.

  I my case, step 4 has been the cause of my sudden increase in gray hair and elevation of blood pressure.

  hope this helps.

  speedingyeti

• PHP MySQL connect error

  Ok
  
  I get the following error when running my php pages on our new web server (Windows Server 2003):
  
  Fatal error: Call to undefined function mysql_pconnect() in
  c:\Inetpub\wwwroot\jionas_website\Connections\jonas_website.php on line 9
  
  When I open the jonas_website.php file, it says the name of the Connection_php_mysql.htm file. It is on my local machine in the folder programs, but not on the web server. Should it be?
  
  If I run a phpinfo page, it works fine... actually all php commands seem to work.
  
  I also have this "unidentified error" when I try to connect to MYSQL via Dreamweaver MX 2004. I followed all of the suggestions of the technical note for this error. I have yet to get it.
  
  I can connect to MYSQL via MYSQLadministrator server so I don't know what is happening.
  
  Help, please.
  
  Darren

  Hung Kuen Kung Fu wrote:
  > MYSQL is not listed in the phpinfo page. MMM. don't know how to enable this in the file php.ini so I'll have to look.

  Remove the semicolon at the beginning of these lines in windows
  extensions section:

  ; extension = php_mbstring.dll
  ; extension = php_mysql.dll

  Also add this line after them:

  extension = php_mysqli.dll

  --
  David powers
  Adobe Community Expert
  Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
  http://foundationphp.com/

• Dreamweaver/MySQL connection

  I've set up a MySQL database and PHP pages in Dreamweaver CS3, which work fine on the machine local ly. I downloaded the database on my server, and everything seems to be fine for this purpose. However, I can't connect to the remote database in Dreamweaver. I get the following error: MySQL ERROR #1045 access denied for user 'xxxxx@localhost' (password: YES)
  Can anyone help point me in the right direction - not too technical if you please, I'm relatively new on this

  on a shared many times server your hosting account is linked to your
  Using MySQL. Something like this:

  username: HostAcctUsername_MySQLUserName
  or
  password: HostAcctUsername_MySqlPassWord

  even the name of your database can defined in this format:

  Name of the database: HostAcctUsername_MySqlDataBaseName

  Jeff

  "nfhopmike" wrote in message
  News:g3gr1p$i7l$1@forums. Macromedia.com...
  > I've set up a MySQL database and PHP in Dreamweaver CS3 pages, which
  > work fine on the machine local ly. I downloaded the database on my server,
  > and
  > everything looks good for this purpose. However, I can't seem to connect to
  > the
  > remote database in Dreamweaver. I get the following error message:
  > MySQL
  > ERROR #1045 access denied for user 'xxxxx@localhost' (password):
  (> YES)
  > Can anyone help point me in the right direction - not too technical
  > please, I
  > am relatively new on this
  >

• help with php mysql connect script

  OK guys im new to php mysql and I try inserting form information in my database. IM using a sitepoint script in which I went through the tutorial made some experiences of myself and it worked...
  
  but now I get this error that I can't understand...
  
  Command error: you have an error in your syntax SQL; consult the manual corresponding to your version of the server MySQL for the right syntax to use near 'order product SET = ' 1', 'average' = size, color is ", amount = '1' at line 1
  
  Here is the page
  http://vaughntucker.com/imagecon/hats.php
  
  and this is the script
  <? PHP
  default page view
  connect to the database
  $dbcnx = @mysql_connect ('p3nl41mysql7.secureserver .net', 'imagecon', ' Dub * boss_1');
  If (! $dbcnx) {}
  echo "< p > unable to connect to the '. 'database server at this time." < /p > ";
  Exit();
  
  }
  
  Select database
  If (! @mysql_select_db ('imagecon')) {}
  exit (' < p > cannot locate the ".")
  "database at this time. < /p >");
  }
  
  MySQL Query add joke
  If (isset($_POST['submit'])) {}
  $product = 1;
  $size = $_POST ["size"];
  $color = $_POST ['color'];
  $quan = $_POST ['quantity'];
  $sql = "INSERT INTO command TOGETHER
  product = "$product."
  size = "$size."
  Color = "$color"
  quantity = "$quan"
  Date = CURDATE () ';
  } else {}
  ECHO 'no data sent ";
  
  }
  If (@mysql_query ($sql)) {}
  echo "< p > your order has been sent. < /p > ";
  } else {}
  echo ' error < p > order process: '.
  mysql_error(). / '< p > ';
  }
  
  
  
  ? >
  
  Thanks in advance

  Murray * ACE * has written:
  > $sql = "INSERT INTO command TOGETHER."
  "> product ='". $product. "',
  "> size ='". $size. "',
  "> color ='". $color. "',
  ' > quantity = ' ". $quan. "',

  No, this is not what is causing the problem. It is the use of 'order' as
  the name of the table. The order is an SQL reserved word. Either the name of the table
  should be changed, or the query INSERT rewritten as follows:

  $size = mysql_real_escape_string($_POST['size']);
  $color = mysql_real_escape_string($_POST['color']);
  $quan = mysql_real_escape_string($_POST['quantity']);
  $sql = 'INSERT INTO 'order' SET
  product = 1,.
  size = "$size."
  Color = "$color"
  quantity = $quan,
  'date' = CURDATE () ';

  Note that I surrounded order and date with backticks. I also have
  $product, was deleted because it has a fixed value. I removed the quotes from
  around $quan, because the numbers should not be quoted in SQL queries.

  The changes I did assume that magic quotes are disabled the
  Server. If they are on, you must also pass the variables $_POST
  stripslashes() like this:

  $size = mysql_real_escape_string (stripslashes($_POST['size']));
  $color = mysql_real_escape_string (stripslashes($_POST['color']));
  $quan = mysql_real_escape_string (stripslashes($_POST['quantity']);

  --
  Adobe Community Expert David Powers
  Author, "The Essential Guide to Dreamweaver CS4",
  "PHP Solutions" & "PHP Object-Oriented Solutions.
  http://foundationphp.com/

• cf 6.0 mysql connection problem 5

  Hey guys,.
  
  Here is my problem
  I can not connect to mysql, after that I upgraded to v5
  It is said:
  
  Connection verification failed for data source: eval
  [] java.sql.SQLException: SQLException occurred in JDBCPool while trying to connect, please check your name of user, password, URL and other connectivity information.
  The root cause was that: java.sql.SQLException: SQLException occurred in JDBCPool while trying to connect, please check your name of user, password, URL and other connectivity information.
  
  It says to check the user name and other things but I can't communicate with mysql Administrator without problem.
  
  Any of you have an idea?
  
  THX in advance
  Jasper

  What version of JDBC MySQL (MySQL Connector) driver? Perhaps, you may need to perform an update. This is a technical note that may apply.

  Phil

• MySql connection

  Hello
  My site is currently using .asp and I'm trying to switch to .php
  My problem is with the connection to the MySql database on the server hosting (mysql.ukfast.net). Using the same information for the old site is to tell the server, user name, password and database, when configuring the connection in Dreamweaver (ver 8) I get the error message "your php server does not have the MySql module loaded or you cannot use MySql_ (p) connection function. I use php version 5.0.2 and Apaache worm 2.0.52 on my workstation which seems to work very well. I tried Googling etc but found no successful response, any help or advice would be welcome.
  Thank you
  Atchy

  Finally cracked.
  Copied: libmysql.dll file C:\windows\system
  (info found at http://forums.winforums.org/showthread.php?t=7414)
  C:\php5\ added to the path environmental variables
  (Info found at http://uk.php.net/manual/en/faq.installation.php#faq.installation.addtopath)

  the two above is not in the news I had, maybe I did not understand.
  Thank you for all your help can now connect to the database and can range from the reconstruction of my site.

  Concerning

  John

• Problem with adapt DB (MYSQL connection)

  Hi all
  I created a bpel process to transfer data of oraclexe to the mysql database. I am able to connect to mysql, but when I ran this process it gives an exception ' Exception Description: Configuration error. " Class [com.mysql.jdbc.Driver] not found... ».
  
  Detailed list
  
  ORABPEL-11622
  Could not create/access the TopLink Session.
  oracle.toplink.exceptions.DatabaseException
  Description of the exception: error in Configuration. Class [com.mysql.jdbc.Driver] not found...
  
  Please suggest.
  
  
  Thank you and best regards,
  Mahesh

  Best way to test this is to create a data source connection in em, then point your JNDI name on this connection. This JNDI name will be similar to that created in jdeveloper. In this way, you know this application server is able to connect.

  It is not mandatory because it uses the connection of your wsdl if this JNDI name does not exist.

  The issue that you are facing, it's that you don't have MYSQL driver in the correct location. I guess you downloaded this in jdeveloper to create your login for the design time. You must now copy this following soa app server and bounce. It is a jar file. You can get one of the following location http://dev.mysql.com/downloads/connector/j/5.0.html, but it is better to use the one that you used to jdev design time.

  The location you put the driver $SOA_HOME/j2ee/oc4j_soa/applib is advanced to install, is $SOA_HOME/j2ee/home/applib is Basic.

  see you soon
  James