Mode admin restricted in Windows Server 2008 R2
In my organization, restricted admin mode has been applied in all desktop computers. So when I remote desktop to servers using MSTSC, a message on the remote computer is not in admin limited mode will pop up.
I activated the admin mode restricts in the server by changing the DisableRestrictedAdmin registry entry and set the REG_DWORD entry, located in the HKLM\System\CurrentControlSet\Control\Lsa registry and DisableRestrictedAdmin the value 0 key. However the same message always appears when I try desktop remotely.
Someone knows how to solve this problem. Thanks in advance.
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
Tags: Windows
Similar Questions
-
My Windows Server 2008 R2 does not all connect directly to the server - level of the console or via the desktop remotely. The symptom is that Active Directory is not running. I tried to connect computers MacBook with OS X (10.5) to active directory. I can log on to your desktop and see all the network shares, so all users seem to work OK - performance is slower than usual. Logging indicates the user ID or password is not valid, but they are working on the jobs or when we book in safe mode. DCDiag does not work because it cannot log in with credentials.
Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer -
How to configure the mode of kiosh for thin clients on windows server 2008
I have an eight Thin Clients who will use RDP to access (Terminal Server Services) Remote Desktop Services on a Microsoft Windows Server 2008 R2 Standard. I would like to set up a group of users for these Thin Clients to be in a mode Kiosh so that they have very limited capabilities, can not download and run anything, unable to save anything in the computer except on the desktop and when they log off and back on everything, they had disappeared because the mandatory profile is loaded again.
I'll have another group that more access is needed.
Kiosk.
Post in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
Hello
We have 2 security groups, 1 to provide desktop access remotely located in "remote desktop users"and 2. To provide administrative access to the group "Administrators".
We have few users who are not part of the Administrators group, they can only access the machine as they are the Group of the party "remote desktop users".
We do not want to add a few "remote desktop users" to the "Administrators group" to run an application as an administrator, so is it possible in windows server 2008 R2 Enterprise to provide these users admin access only to run this unique application... They should not be able to do anything but him running this application as admin...
Its only for a few users selected not all who has remote access to this computer...
Thank you
Jean Michel
This issue is beyond the scope of this site and must be placed on Technet or MSDN -
move win2003 10.2.0.3 - db to windows server 2008 64 bit 32 bit
Hi friend;
I have my doubts, I have win2003 32 bit and 10.2.0.3 OS db (for ebs r12), I need to move db to windows 2008 64 bit. I am the following note:
With the help of Oracle E-Business Suite Release 12 with a single platform of database Tier on Oracle 10 g Release 2 [ID 456197.1]
The question is that:
My source db is 10.2.0.3, during the remark, I need to create the home new oracle on win2008. I found 2 links for installation of db:
Oracle Database 10g Release 2 Standard Edition, Enterprise Edition and Standard Edition One
Oracle Database 10 g Release 2 (10.2.0.4) for Microsoft Windows Vista x 64 and Microsoft Windows Server 2008 x 64
and
Oracle Database 10 g Release 2 (10.2.0.1.0) for Microsoft Windows (x 64)
I wonder if possible to use Oracle Database 10 g Release 2 (10.2.0.1.0) for Microsoft Windows (x 64) to win2008 too? or I need to download Oracle Database 10g Release 2 (10.2.0.4) for Microsoft Windows Vista x 64 and Microsoft Windows Server 2008 x 64?
PS: Do not forget I 10.2.0.3 on the source server
Thank youuser12203572 wrote:
Hi AlexYes, these steps are correct, but after the third stage (backup (dbf) cold copy from source to target) thenyou need to make my third step above (3.Startup of the database with the mode upgrade as below) in my reply
You mention below step:
2. transfer this backup on target server (windows 2008 64-bit and 10.2.0.4), Create new service oracle using oradim (oradim-new - sid
intpwd - syspass - pfile 'pfile_location') *.< i="" wont="" do="" it="" coz="" note="" doesnt="" mention="">
3 database starting with the mode upgrade as below
Set ORACLE_SID =
sqlplus "virtue sysdba".
Startup pfile upgrade = "pfile_location.
@$ORACLE_HOME\rdbms\admin\catupgrd.sql;
stop immediately;
Startup pfile = 'pfile_location.
@$ORACLE_HOME\rdbms\admin\utlrp.sql;
Create spfile from pfile = utlrp.sql;But in the note, he just says:
Database of option C) migrate Windows 32-bit Windows Itanium or x 64 WindowsTo move the Windows 32 - bit Windows Itanium or x 64 Windows database, follow these steps:
Copy the files (.dbf) database of the source on the target computer computer
Copy the configuration of database init.ora and ifilecbo.ora files
Change the configuration on the computer files target to reflect the new environment. In addition, the value systemtrig_enabled = false
Startup of the database in nomount mode
Recreate the database control files
Upgrade the database from 32 bit to 64 bit (modules of pl/sql recompiles and change the size of Word) running utlirp.sql and utlrp.sql (in ORACLE_HOME/rdbms/admin /). See the sections use and notes in each of these scripts for instructions on how to execute them.
Delete systemtrig_enabled = false of init.ora
Stop and restart the database normallyAnd don't forget it's db E - Business Suite, still belive that I need step 3? Coz he doesn't mention in the footnote, I just want to be sure my friend. Thank you for your understanding
These steps are correct, there are no problems. I also wanted that same sweet Oracle is the same, it need compile and upgrade of database objects, due to this there version OS and architecture is different (32-bit and 64-bit). As you mentioned the upgrade of database you can instead of my third step as
Upgrade the database from 32 bit to 64 bit (modules of pl/sql recompiles and change the size of Word) running utlirp.sql and utlrp.sql (in ORACLE_HOME/rdbms/admin /). See the sections use and notes in each of these scripts for
-
HP Pavilion p7-1451 USB 3.0 and Bluetooth drivers for Windows Server 2008 R2
I bought a HP Pavilion p7-1451 so I might have a machine that is affordable, yet powerful enough to put a server software development environment on (I'm a software engineer).
It came with Windows 8, but I need Windows Server 2008 R2, I own through an MSDN subscription. I did what I always do in these cases, re-partioned the hard drive, re-formatted and installed the new operating system.
I have almost all devices work fine, but it still does not recognize the USB 3.0 ports and Bluetooth device. I looked everywhere but could not find something that works. Whatever it either from the HP site is targeted for Windows 7 or 8 and trying one of those, it tells me "your system does not meet the requirements of the operating system" and MSI publishes all the drivers for this particular motherboard (that I can find anyway).
Motherboard: MSI MS-7778, also known under the name of: MSI 2AEO version 1.0
BIOS: FRIEND 8.12
Here is the list of "other devices" in Device Manager that Windows does not recognize:
BCM20702A0
(USB) Universal Serial Bus controller
(USB) Universal Serial Bus controller
Bluetooth device ID: USB\VID_0A5C & PID_21F1 & REV_0012
USB Controller device ID: PCI\VEN_1022 & DEV_7812 & SUBSYS_2AE0103C & REV_03
Windows doesn't always recognize them after allowing him to look on the internet.
I googled everywhere and I'm not getting anywhere.
Does anyone have advice?
Any chance that this could be linked to the BIOS?
I'm not having any chance to find a BIOS download for this motherboard either.
Any help is very appreciated!
Find out!
Use your expertise in software engineering to mod the driver for USB 3.0 to work...
Look at the last post on the thread. You need to mod the text file... replace NTamd64.6.1.1 with NTamd64.6.1
http://forums.AMD.com/game/messageview.cfm?CATID=454 & ThreadID = 163739
-
D20 problem of configuration of Windows Server 2008 R2 / 1 x SATA HD / 4 x SATA SSD
Hi all
I have a Mod D20. 4155 and want to use next to it is by default SATA HDD SATA SSD four disks of virtual machines. Windows Server 2008 R2 will be the OS with the use of its Hyper-V features.
I have Aproblem with detection of drives in the configuration of the operating system. All 5 disks are visible in the Marvell controller BIOS setup. It is possible to configure a RAID on the SSD, etc, but I don't "see" any disk in the configuration of the operating system. I tried to load additional drivers in the part of the Setup utility GUI, but it did not work. I tried with the driver Marcell SAS and Intel Matrix driver, both located at http://www-307.ibm.com/pc/support/site.wss/migr-72280.html.
Suggestions for the BIOS of the PC / BIOS Marvell / OS installation configurations?
Best regards, Chrischmi
Hi all
I found the solution myself. After detection, the default drive is a SATA drive (and), I got the idea to test it on the Intel SATA controller. It was possible to install the spirit of the machine the disks attached to the Intel controller. After installation, I went to Device Manager and installed the driver of Lenovo Marvell, rekindled the Marvell controller disk and started the. Successfully. Yes!
On my way to the solution, I had another problem: in the setup of Windows GUI part, I got an error of 0 x 80300001 with Lenovo's Intel SATA driver. It was not possible to install windows Server on the SATA drive with reason0x80300001. very helpful post, Microsoft! (-) I decided to use the default Microsoft for the Intel SATA controller driver after a reboot. Installer executed well, but ended with an error 0 x 80070017 and problems of copy of (unknown) files. The solution (found after a few hours...) was to burn a new installation of Windows Server DVD. I don't want to talk about it anymore...
-Christoph
-
Windows server 2008 r2 (0 * 1) error in the task shedeuler
Uses a machine to windows server 2008 r2 server. in windows, library of tasks sheduler get error in daily backup code (0 * 1) I tried to run manually, but doesn't work .i try to resolve the error with some sujjessions given by some professionals .but while applying changes his watch just that the administrator password is wrong. or am not allowed as a sentence. but the thing is am the admin of the server and has access to the remote server. I tried to manually launch its working, but errors still. in my case, the error is in the backup industry... and need to be deleted as soon as possible. the answers and sujjessions will be greatly appeciated
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
TechNet forums:
https://social.technet.Microsoft.com/forums/en-us/home
MSDN forums:
https://social.msdn.Microsoft.com/forums/en-us/home
See you soon.
-
Windows Server 2008 R2 SP1 AHCI RAID change
Hello
OS: Windows Server 2008 R2 SP1
Storage: 1 x SSD
Tip: Supermicro X9SRW-fCurrently, the SATA in the BIOS option is on AHCI. Start Windows on the desktop without problem.
Objective: Convert AHCI Raid mode. The integrated chipset to create a matrix to mirror with 2 x SSD.
I downloaded the disk driver for this card and installed the Intel Rapid Storage driver/software. I reboot and switch the SATA Raid mode. Windows starts to load and immediately blue screens. Put the SATA to AHCI mode allows me to boot successfully.
There are a few other drivers from the disc. Install these drivers, the windows are no longer boot in AHCI or Raid mode.
iaStorA.inf: installs rest AHCI Raid Controller Miniport + RTS filter driver
iaStorB.inf: installs rest AHCI Raid Controller Miniport + RTS filter driverHKEY_LOCAL_MACHINESystemCurrentControlSetServicesMsahci\\\ (set to 0 Start)
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\IastorV (set to 0 Start)How can I activate the raid option and get Windows to start without error? Registry hack? Other drivers?
* Note the OS has been cloned for the SSD. I don't have the option for the new Windows installation.
This issue is beyond the scope of this site and must be placed on Technet or MSDN
-
[REQUEST] Limit the ability of Windows Server 2008?
I want to ask about the capacity limit of Windows Server 2008?
-Maximum number of users that can create a server
-Maximum groups
-Maximum memory
-Maximum storage
-Maximum Admin
-Maximum number of connection for a second
-Maximum CPU
Ask in the forum Windows Server:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer -
Windows Server 2008 R2 Activation error 0 x 80070005
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 50
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: n/a, hr = 0x80070005
Windows product key hash: n/a, hr = 0x80070005
Windows product ID: 55041-178-8577096-84607
Windows product ID type: 6
Windows license type: Volume MAK
The Windows OS version: 6.1.7601.2.00020110.1.0.007
ID: {2F5492D1-27AD-4A54-8E0B-53EB6FCB6291} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows Server 2008 R2 Standard
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.130828 - 1532
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
Download signed ActiveX controls: disabled
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: disabled
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: disabled
Recognized ActiveX controls safe for scripting: disabledAnalysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]Other data-->
Office details:{2F5492D1-27AD-4A54-8E0B-53EB6FCB6291} 1.9.0027.0 6.1.7601.2.00020110.1.0.007 x 64 *-*-*-*-BATH 55041-178-8577096-84607 6 S-1-5-21-3011534046-397137371-3240662683 Microsoft Corporation Virtual Machine American Megatrends Inc.. 090006 20120523000000.000000 + 00062C80D00010000F2 0409 0409 India Standard Time(GMT+05:30) 1 3 VRTUAL MICROSFT 109 Content Spsys.log: 0 x 80070002
License data-->
C:\Windows\system32\slmgr.vbs(1333, 5) Microsoft VBScript runtime error: permission deniedWindows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Not registered - 0 x 80040154
The admin service: not registered - 0 x 80040154
Output beyond bitmask:--> HWID data
N/a, hr = 0x8007000dActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC VRTUAL MICROSFT
MICROSFT FACP VRTUAL
SRAT VRTUAL MICROSFT
VRTUAL MICROSFT WÆT
SLIC VRTUAL MICROSFT
OEM0 VRTUAL MICROSFT
VRTUAL MICROSFT LASRYVITRAGEAsk in the forum Windows Server:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer -
When installing ha6 on windows server 2008 R2 compatibility issue
Hi, I want to install Virtual Studio 6 on windows server 2008 R2 (to run our legacy code). I encountered the problem of compatibility: "virtual studio has a compatibility issue with this version of windows.
I tried the steps below:1. right click on "setup.exe" and select "Run as Administrator"2. run in compatibility mode, such as windows XP sp2.It does not, someone who can help on this? Thank you!Hi Weihe,
The question you have posted is related to the Virtual Studio 6 installation on windows server 2008 R2 and it would be better suited to the TechNet community.
Please visit the link below to find a community that will provide the support you want. http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads
Hope it will be useful.
-
VHD for evaluation of Windows Server 2008 R2 not accepting not a password on the Microsoft Web site
Hello
I recently downloaded and installed Windows Server 2008 R2 evaluation VHD on my Hyper-V using the link below.
Title: Windows Server 2008 R2 Evaluation VHD for Hyper-V Images (180 days)
http://www.Microsoft.com/en-US/Download/details.aspx?ID=16572
However, every time I get the username and password as "Admin" & Pass@word1 mentioned in step 12, in accordance with the instructions, that I get the error message below.
"The user name or password is incorrect"
My data from the computer
Operating system: Windows 8 Pro
The use of Hyper-V
Can someone help me?
Hello
The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.
You can check the link to post your question:
http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads
I hope that helps!
-
Willy Introscope in Windows Server 2008 R2 Instalation problem
I am not able to launch willy introscope setup in windows server 2008 R2? Its a must program for me to install. It is a the latest version .exe file. Whenever I click on this file, nothing happens. I tried to use run as Admin, but it is also useless. Help, please
Hi HrishavSinha,
Your question is better suited for Windows Server 2008 R2 on TechNet. Please post your question in the TechNet Windows Server 2008 R2 forum.
http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general
-
After restoring the Windows partition boot flag, I got:
0xc000000f
\Windows\system32\ntkrnlpa.exe
kernel is missing or damaged.
I use Windows Server 2008 R2 installed on 70 GB primary partition & active with appropriate MBR. It is not the consumer - it is installed on the laptop. After the repair broken BCD (Windows 7 installation DVD, DVD server doesn't have this tool :() this problem.) I know that this (ntkrnlpa.exe) file does not exist, and it should not. System could not start any mode (even Safe Mode base).
The disc is perhaps the problem because PARAGON Hard Disk Manager 2011 has problems with the editing of this partition but it it sails well (as other tools). The files seems good. Also, CHKDSK has not found no serious problems such as bad sectors - it fixed only tiny problems.
What should I do?
Hello
I suggest you to post the question in the forum below and check if it helps:
http://social.technet.Microsoft.com/forums/en-us/winservergen
It will be useful.
Maybe you are looking for
-
inspit of my apple ID and password cannot connect my my iphone apple ID 6
Inspit of my apple ID and password cannot connect my my iphone apple ID 6.
-
How to transfer the disc to disc Mac OS extended (journaled) formatted ExFAT iphoto
How to transfer the iphoto library of ExFAT formatted the disk to drive Mac OS extended (journaled)
-
D20 from Lenovo and Revodrive3 PCI
Hello I installed an OCZ Revodrive3 on my D20 At the time of startup, I get an error message "Expansion ROM not initialized". Then the machine starts, but the primary disk SATA, not the Revodrive. If I go into the BIOS to disable the verification of
-
Problem updating firmware on LaserJet 4100
Hi all Looks like I can put my subject in the wrong forum. I have no doubt I should have put my question here in the forum of firms. If someone could take a look at my problem and update (here or here, I subscribe to two topics), I'd be happy. https:
-
I have Windows 7 and just downloaded 10 Microsoft upgrade. Now, I have no anti-virus protection of Microsoft. Someone can it tell me why?