When installing ha6 on windows server 2008 R2 compatibility issue

Hi, I want to install Virtual Studio 6 on windows server 2008 R2 (to run our legacy code). I encountered the problem of compatibility: "virtual studio has a compatibility issue with this version of windows.

I tried the steps below:
1. right click on "setup.exe" and select "Run as Administrator"
2. run in compatibility mode, such as windows XP sp2.
It does not, someone who can help on this? Thank you!
Advertisement

Hi Weihe,

The question you have posted is related to the Virtual Studio 6 installation on windows server 2008 R2 and it would be better suited to the TechNet community.

Please visit the link below to find a community that will provide the support you want. http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

Hope it will be useful.

Tags: Windows

Similar Questions

  • I get error Service disabled 0 x 80070422 when you install SP1 on Windows Server 2008 R2 (KB947821)

    original title: I get error Service disabled 0 x 80070422 when you install SP1 on Windows Server 2008 R2

    I get the above error if you use Windows Update or install SP1 from DVD.

    I found that the Windows Modules Installer Service is the service responsible for the error. It is configured to start automatically. When I go to the Dependencies tab I get a pop up that says: "Win32: the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him."
    I disabled AVG during an installation attempt.
    I followed the troubleshooting steps, by running the update of preparation tool (KB947821 nothing helps.

    Hi Roy,

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

    http://social.technet.Microsoft.com/forums/en-us/categories/

    I hope this helps.

  • Blue screen when you log in windows server 2008 r2

    When you connect in windows server 2008 r2, all I have is a blue screen and the mouse.

    I tried to search for solutions on the internet, then I found a microsoft patch "http://support.microsoft.com/kb/2590550" I have run the fix command line but he gave me nothing, no error or success messages.

    I tried to restart but I still have the same problem.

    Is there a solution to this problem?

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.technet.Microsoft.com/forums/en-us/home

    http://social.msdn.Microsoft.com/forums/en-us/home

  • I have this error 0 x 80070005 (access) denied when I activated my Windows server 2008 R2 64-bit

    I have this error 0 x 80070005 (access) denied when I activated my Windows server 2008 R2 64-bit. Here's the print for the activation screen. Your help is most appreciated. Thank you

    Hello Mika Wong,

    The question you have posted is related to Windows Server 2008 and would be better suited on the TechNet support forum. I suggest post you the question on the TechNet support forum for more information.

    http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  • vCenter server 4.1 install not on Windows Server 2008 R2

    I just downloaded vCenter server 4.1 and tried to install it on my windows 2008 R2 (64-bit) server, and the installation program always gave me this error:

    Description: Product: VMware vCenter Server - this product cannot be installed on operating systems for 64-bit at the following address:
    Windows XP SP2 or higher
    Windows Server 2003
    Windows Server 2008.

    After I clicked ok, then the installation process just stopped.  I scoured online for a few hours, but couldn't find an answer.

    A disappointed trial customer

    Hello and welcome to the forums.

    This server is also a domain controller?  Installation on a domain controller is not supported and will not work.

    Good luck!

  • Fax through Windows Server 2008 R2 Std issues.

    Help!  I get "Fatal errors" faxing as well as "send faxes with the help of the selected printer, you must first create a fax account".  messages.  These two happen to Windows 7 Professional PC Fax via a Windows Server 2008 R2 Std fax server.  Unrecoverable errors are somewhat contradictory, but rather ordinary, but the "must first create the account" error whenever a workstation.

    On the workstation "must first create the account", it actually sends the fax but the error is misleading for the user.  I removed the fax services in Control Panel, the Windows on the desktop features, rebooted, removed the server account, restarted the server, fax services added the services of fax to the workstation, rebooted, reconnected to the fax server and get always the same message.
    On the workstation "Fatal error", I tried tweeking with the settings of the modem (flow control, modem speed, etc.), but still not that problem.

    I hesitate on the removal of the fax from the server server role that I have more than a dozen represents the sending and receiving of faxes by him now.
    Someone has any suggestions, and if I do not remove the Fax Server since the Windows Server 2008 role when I add I get the same settings as before?
    Thank you.

    Hello Joel Schaefer,

    Your question about Windows Server 2008 R2 would be better treated in the TechNet for ITPros forums. Please repost your question in the here a link to the forums of Windows Server 2008
    The experts, it will be able to help with your fax number.

    Thank you

    Marilyn

  • X 64 installed iFilter on Windows Server 2008, but it is not indexing

    It seems to be only index the content of documents which have been added after installing the iFilter. It doesn't seem to be indexing of documents that were already on the server before installing the iFilter component. I have to remove and rebuild the search index after installing the iFilter component? Can anyone confirm that for me?

    Yes, that would be true for any component snap-in you added in the Windows Search Service.

  • T320 reformat and install the new Windows Server 2008 R2

    Dear Sir/s,

    I'm trying to reformat the server but when I go to the OS deployment, it was said that the drivers are not available.  Help, please.

    Kind regards

    Water

    Water,

    Here is the driver operating system deployment package. Download and use it to load the drivers. - http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/poweredge-t320?driverId=DD97G&osCode=WS8R2&fileId=3194472590&languageCode=en&categoryId=DD

    Let me know how it goes.

  • Windows Server 2008 R2 DNS issue

    Hello

    I created the new domain and try it now one of the boxes to Office XP. The issue I'm having is I cannot join the domain using domain FULL name, but I can join by using the NETBIOS name. I can ping the server by name and IP address, but not by servername.domain.com. When I run NSLOOKUP two devices, PC and server, see each other, although, again by using the NETBIOS name by domain name opposition.

    While pushing, I thought when I was joined to the domain I used domainname.com without omitting the .com part and when this does not work I used the NETBIOS name. Thus, it will throw on me, that was the question. At the same time, I joined the field by using the NETBIOS name and ultimately it belongs to domainname.com, but again, when I connect the domain listed in the login screen is the NETBIOS name, not domainname.com. I still cannot ping it and it's the home LAN.

    Any direction is greatly appreciated.

    Hi, MLS,.

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the following forum:

    http://social.technet.Microsoft.com/forums/en-us/categories/

  • Windows server 2008 r2 domain controller deletes printers on windows 2003 Server

    We have recently installed two new Windows Server 2008 R2 servers in our field.  one of the new servers is the new domain controller (successor of Windows Server 2003 SBS, which has been decommissioned).  There are two other Windows 2003 servers in the domain.  When we turn off all servers for maintenance and then power them back on, the print on the windows 2003 Server spooler crashes; printers are deleted and the server does not allow you to add printers.  is this be caused by some settings in windows server 2008 r2?  This happened twice, and the solution is to rub the print on the windows 2003 Server spooler and reinstall the printers from scratch.

    Hello MPF_mec29,

    Thanks for posting your question in the Microsoft answers Forum. If you have questions about Windows Server, please visit the following link:

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

    Eddie B.

  • Windows Server 2008 - Group Policy does not

    Hello

    I recently deployed a windows 2008 (32 std) additional domain controller for our windows 2003 DC. and I moved to make PDC FSMO roles in 2008. now I get error when I open Group Policy and none of the policy is to take users. the error is "the network name is not found.

    I run the command adprep/adprep domainprep/gpprep command when I deploy the windows Server 2008. below error, I get in the event viewer for the same thing.

    "The Software Installation Group Policy Client Side Extension was impossible to apply one or more parameters, because the changes must be processed before logon startup or user system. The system will wait for the treatment group strategy to finish completely before the next startup or logon for that user, and this may result in slow startup and startup performance '.

    Please advice. Thank you

    Hello

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the following forum:

     

    http://social.technet.Microsoft.com/forums/en-us/categories/

  • Manually download the update for Windows Server 2008 and Windows Vista platform

    Where can I manually download and install Update for Windows Server 2008 and Windows Vista platform?

    I have a machine that requires this update for installation of PowerPivot for Excel 2010, but the Windows updates are usually hunted in the world by our headquarters and I can not run it manually.

    Platform for Windows Server 2008 and Windows Vista updates are only available via Windows Update (or WSUS, in your case). Contact your IT Department. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Runing comments windows server 2008 R2 64-bit host windows server 2003 R2 64-bit using VMware

    My problem is that I m install windows server 2003 64-bit on a machine. the machine can take in 64-bit support, so after installing 64-bit windows server 2003, I install VM workstation and then on it I install 64-bit windows server 2008 r2, but it gives an error...

    a lil help is highly appreciated

    Your CPU doesn't support VT - x.  VT - x is required for 64-bit on Intel hardware customers.  See http://kb.vmware.com/kb/1003945 for more information.

  • VCenter on Windows Server 2008 R2 installation

    I wonder if there could be problems installing VCenter on Windows Server 2008 R2?  We also manage VMware View in our environment VSphere and plan that upgrade to the latest version.  Anyone experiencing problems with the help of Windows Server 2008 R2 for VCenter?

    We are running the most recent version of vCenter on Windows Server 2008 R2, and he's not going great.

  • Is it better to use Windows Server 2008 with or without Hyper-V?

    There are two "families" of Windows Server 2008: with and without Hyper-V.

    I need to install a new Windows Server 2008 (x 64) in a new server machine.  So I was wondering that I should choose.  With or without Hyper-V?  Because in the future, I might want to install VMWare Server 2.  If there is Hyper-V, would there be a conflict?

    Use that WITH Hyper-V. Hyper-V is a role that you add after the installation. If you install one without, so you'll never have the ability to use Hyper-V on this machine, if you need. Please keep in mind that you cannot run virtual Hyper-V and VMware Server computers on the same host at the same time, as the previous poster said - you will see a pretty blue screen if you try

    Dimitri Rodis

    Integrita Systems LLC

    http://www.integritasystems.com

Maybe you are looking for

  • (Your account has been temporarily blocked)

    Hello.. my email address * address email is removed from the privacy * was blocked and I tried to reset the password and they send me the link that resets my password and I have reset it and I'm still not able to connect to my email. also, I saw ther

  • How to send pictures from Windows to a mobile phone?

    Help, please! I want to send pictures from my computer to a mobile phone (ANY phone).  I use Windows XP (computer desktop) and Windows 7 (laptop).

  • Last Chance Porth-a-thon payment not yet paid

    Hello I filled the news of milestones for last chance portathon over 2 months ago and I have not yet been paid. !! I paid for my community Portathon so it's not my problem to paypal and I tried to get hold of someone on BlackBerryDev on Twitter for a

  • BlackBerry Q10 HSBC quick balance for Q10?

    Very disappointed with the lack of apps for my new Q10, but particularly quick HSBC Balance. I love the BlackBerry products and Q10 is usually a fantastic device (a few design decisions that didn't really take into account the requirements of the use

  • Failure of e-mail delivery

    I sent emails to certain addresses. These addresses now get a delivery failure. I had someone send me a mail so I answer and I get a failed to deliver? Why?