Mode-exit sleep and extended

Similar Questions

• sleep and extended problem solved!

  Hi all.
  Finally I solved my problem (see "sleep and extended in windows XP" for more details).
  I uninstalled everything on HP printer because Windows XP plug-and-play service does not load the Power Manager settings if it is not the printer.

  Now I understand why the HP software does not work properly, you know?

  See you soon.

  Gianluca

  It seems that the HP software has adopted some features of the operating system. Normally, it is very good for the manufacturer to give the features more functions.

  But if there is a third software such as Power Saver from Toshiba could occure problems because the energy saver adopts XP power settings and it administer very dominate. If the HP printing software was not able to adopt the settings of MS!

  Hans Bye

• Sleep and extended modes disappeared!

  Hello! All of a sudden, the sleep and hibernation modes have disappeared: the options are then to stop, but they can not be selected. In addition, the "sleep mode" does not activate when I close the lid of the computer (even though I already checked in the options it is supposed to do). I hope someone can help with this!

  @jessnoun...

  Found this...

  "Vgasave is that Windows uses when the graphics driver is not present or does not work, or in Safe Mode." Go to the Device Manager and check the status of your graphics card and also check hard goods that could conflict with display usually under 'other devices' or 'Unknown devices' if present. Remember that you have the latest driver from the manufacturer's support Web site. »

  Source-> http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/vgasave-is-killing-me/2fe723...

  Try it...

• Sleep and extended in Windows XP

  My computer will not sleep or hibernation any more (maybe if I installed a HP psc). I want to know why.
  Thank you
  HP psc = HP printer Scanner Copier

  [Edited by: admin on 16/09/04]

  Do you know how can I restore the stand-by and extended functions?

• My printer 3050 J610 goes in standby mode or sleep, and then I can't print docs it wireless

  Whenever I have don't print something for a few hours, my printer goes into sleep mode or sleep.  When it does, it can be used to print from my laptop or android for it.  Y at - it a way to put in place so that it doesn't "go to sleep", and it is always available for me to print with.  I like the printer, but it seems few off that you can't print on it wireless and it is considered as a wireless printer.  That's the only reason why I bought it and now I can't even use it without stepping down and turning the printer back again.  If I wanted to do this every time I was going to just print from my main computer!

  Thank you

  Ashley

  Well, I activated the incoming and outgoing settings under sharing files and printers in the firewall. I've also set up a connection between the router and the printer security rule. Since then, I was able to ping the router and the router by its IP number regularly for more than 72 hours. I hope that this solves the problem and everyone helps the dilemma.

  Mike

• Satellite Pro A300 sleep and extended functions does not properly

  I have a new satellite Pro A300 PSAJ1E - 01E00VIT, and I find this problem:

  Sometimes (not always: maybe it depends on which program is running) in trying to put the computer to sleep or into hibernation, it does not stop, but only stop the monitor (Panel), while the fan goes on and the power light is green. Of course, a lot of energy consumption of battery!

  Then there is no other way to take off the computer by pressing the power button for a long time... but this is not correct!
  NB: my computer is always connected to a local network, and generally there are some browser windows open when I put it in stand-by mode.

  How can I fix?
  jomurray

  You must update the BIOS and must always close the programs and applications that ruin on the laptop before activating the standby mode or hibernation would be.

  I found this solution in this forum, and according to some people here it has solved similar problems

• Blocking issues, of sleep and extended Vista

  Running Vista Enterprise edition on a HP 6930p with Service Pack 2 installed. Some days, that the machine works well, if I lock it then he out of lock fine, if I left in standby mode, I have to reboot for it to wake up. Other times I hit ctrl + alt + delete and nothing happens, system does not allow me to lock it. Cause then me having to let him sleep on his own, which then means that I have to restart it wound out of mode "Eve". Have turn off Hibernate that too did not work for me. Apply all patches, patches and do it yourself links I can find on the site of microsoft and the knowledge base. If anyone has a better solution, circumvent or difficulty apart from reinstalling Vista, please let me know. It is an end-user machine and has been a problem since giving him the laptop with Vista installed.

  The machine itself is built from a brand image and not really tested before the user receives. The question also not spread wide which means we have a lot of users with similar HP and vista, but not the problem. This leads me to believe that a driver problem is to blame or maybe a setting within the system itself. I did the BIOS update and patches installed and used the latest drivers from the HP site. This seems to fix the problem at the time, but I have a particular user that this keep recurring with. Any other suggestions would be great, thx

• Sleep and extended booklet

  My libretto U100 wake up after going to standby or hibernation. If anyone else has had this problem and if so any suggestion on how to fix?

  Any help would be appreciated.

  Hi Anthony

  I checked all the options on my friends book and everything works fine. I also checked all the options of the electric tool under the Action of Setup (manual configuration) tab.

  Your device comes pre-installed with a Toshiba recovery media?
  Try to remove the tool and install it again.

• Sleep/wake extended options greyed out

  I have a HP Compaq Presario CQ61 - Windows 7 64 bit. My sleep and hibernate options in the start menu are grayed out. I thought it was a problem with my video card, and when I go into Device Manager there is a yellow bang next to my called Mobile Intel (r) 4 Series Express Chipset Family display adapter and below it is written: this device cannot find enough free resources that it can use. (Code 12)  If you want to use this device, you will need to disable one of the other devices on this system. I tried to update the display adapter according to HP I have the latest driver, so I have no idea what to do? My laptop used to have installed vista, but my hard drive failed, I got a new one installed with Windows 7 and since I got Windows 7, this problem occurred. Help would be much appreciated!

  [Moved from comments]

  Hi Sam,

  A power plan is a collection of hardware settings and system that manages how your computer uses and conserves energy. Power management can save energy, maximize system performance, or balance conservation of energy with performance.

  Let us try these methods.

  Method 1.

  You can run the troubleshooter of power to set your computer's power settings. The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'. These settings can help you save energy and extend the life of the battery in your computer.

  Open the power Troubleshooter: http://windows.microsoft.com/en-in/windows7/open-the-power-troubleshooter

  Method 2.

  You can create a new power plan and check if that helps.

  Change, create, or delete a power plan (scheme): http://windows.microsoft.com/en-in/windows7/change-create-or-delete-a-power-plan-scheme

  Additional information.

  Power plans: frequently asked questions: http://windows.microsoft.com/en-in/windows7/power-plans-frequently-asked-questions

  Sleep and extended: frequently asked questions: http://windows.microsoft.com/en-in/windows7/sleep-and-hibernation-frequently-asked-questions

  Response with the State of the question and we will be happy to offer you our help.

• Sleep and Hibernate works not properly

  Hello
  I have a laptop HP running Win7 64 bit which has developed a problem when you use power-saving features and ensures extended. I rarely stop or restart the system and very rarely use Hibernate, opting instead for simply use sleep function when I close the lid. Stop and restart both to perform as expected, but whenever I try to use the sleep function, either by closing the lid or via the options on the start menu, simply, the screen goes black and the laptop runs - the fan is on and the hard drive light flashes sometimes. I waited for about ten minutes, but nothing changes. Then, when I lift the lid to wake the system, nothing happens and I have to do a closed hard. The same thing happens with the Hibernate.

  I used the system restore already to try to resolve, by choosing a restore point, a few days before the recent updates or system changes, I did but the problem remains.

  I also changed the settings in the power settings to try to solve the problem, but once again failed to do.

  I turned it off Hibernation using start, run, powercfg-h off but once again, this has not fixed the problem. >

  Any advice greatly appreciated.

  Hello

  Check with HP Support, their online documentation and drivers, and their known forums
  questions.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------

  More that might help.

  References to Vista also apply to Windows 7.

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on
  Modem and so on.

  Windows 7 problem with sleep and Hibernate Options - see the troubleshooting section
  http://www.computerperformance.co.UK/Windows7/windows7_sleep_problem.htm

  Troubleshooting Windows Vista sleep and Hibernate (also Windows 7)
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  (also Windows 7)
  http://support.Microsoft.com/kb/950686

  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Standby Mode Vista and a solution (also Windows 7)
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to disable and re-enable hibernation on a computer that is running Windows http://support.microsoft.com/kb/920730

  How to restore the default settings of the power Plan in Windows 7
  http://www.SevenForums.com/tutorials/950-power-plan-restore-default-settings.html

  
  How to change the power Plan settings in Windows 7
  http://www.SevenForums.com/tutorials/778-power-plan-settings-change.html

  How do I change the sleep settings in Windows 7
  http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

  
  How do I change the sleep settings in Windows 7 (including hybrid sleep)
  http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  =======================================================

  If necessary after trying the above, (this won't help if all settings are always wrong).

  Try a repair Installation which should allow you to maintain programs and the same data if
  redundant backups are always a good idea.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• NB520, NB550D - how to set the volume to the State of sleep and music?

  I'm looking for an opportunity to adjust the volume to the State of sleep and the music...
  The mere fact that I noticed is that volume depends on the defined level when the computer was working. But how do I change the State of sleep and the music when the comp is off swich?

  Hi communication,

  I checked the user manual and found the following information:
  The volume control and mute setting may be different between the Windows mode and the mode of sleep and the music. Before connecting the audio device to the computer, turn down the volume of the audio device. Sound quality can also be different.

  So based on this information, you will need to adjust the volume in Windows, but it might be a little different. I have not found any information on the change of volume in sleep mode and music.

• How to activate the sleep and Hibernate functions?

  

  I think the image to explain my problem!

  Hello

  This should help you.

  "Sleep and extended: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  See you soon.

• My iPad detects inactivity while I'm listening to a story.  Then he slips into the mode "sleep" and interrupts the story.  Any suggestions on how to avoid this?

  My iPad detects inactivity while I'm listening to a story.  Then he slips into the mode "sleep" and interrupts the story.  Any suggestions on how to avoid this?

  Setting to never by using the auto-lock settings application.

  Settings > general > auto lock > never

• Qosmio F60-136: Impossible to disable the USB sleep-and-Charge in hibernation mode

  USB sleep-and-Charge function is marked as disabled in BIOS (v2.70).
  This can be checked with Sleep Utility (v1.4.1.5) where the function also seems to be disabled.
  During the stop of my laptop, smart phone or the stop MP3 player to charge.
  Everything is OK down there.

  However, when putting my laptop in * hibernation mode *, my Smartphone and my MP3 player continues to be charged!
  It's a real problem, because, even if no device is plugged into the USB port, in hibernation, the battery loses capacity quickly (much more when the laptop is turned off completely)

  * Obviously a bug in this feature. Please provide a fix as soon as possible! *

  _Environment details: _
  Toshiba Qosmio F60 136
  BIOS version: 2.70
  THIS version: 2.40
  Version of the utility of sleep: 1.4.1.5

  Hmm interesting
  Have you checked if the sleep and the load is disabled in USB Sleep and Charge Utility
  If please don t mix USB Sleep and Charge utility and utility of sleep.

• How to reconnect my phone? his 'sleep' and disabled mode?

  IPhone locked mode 5 c 'sleep' and is disabled and itunes does not work for me.

  jayxthaxsniper wrote:

  IPhone locked mode 5 c 'sleep' and is disabled and itunes does not work for me.

  Let me see if I understand. The appliance is in mode 'sleep'. You say that because the screen is dark and you can't seem to do anything? Why do they say it is disabled? It shows the screen saying it is disabled, or you say it is disabled because again, you can't do anything with it? Why do you say that iTunes does not work? Is it done or made make you this statement? Better to explain what is happening and what you tried to do to fix.