Sleep and extended in Windows XP

My computer will not sleep or hibernation any more (maybe if I installed a HP psc). I want to know why.
Thank you
HP psc = HP printer Scanner Copier

[Edited by: admin on 16/09/04]

Do you know how can I restore the stand-by and extended functions?

Tags: Toshiba

Similar Questions

sleep and extended problem solved!

Hi all.
Finally I solved my problem (see "sleep and extended in windows XP" for more details).
I uninstalled everything on HP printer because Windows XP plug-and-play service does not load the Power Manager settings if it is not the printer.

Now I understand why the HP software does not work properly, you know?

See you soon.

Gianluca

It seems that the HP software has adopted some features of the operating system. Normally, it is very good for the manufacturer to give the features more functions.

But if there is a third software such as Power Saver from Toshiba could occure problems because the energy saver adopts XP power settings and it administer very dominate. If the HP printing software was not able to adopt the settings of MS!

Hans Bye

Sleep and extended modes disappeared!

Hello! All of a sudden, the sleep and hibernation modes have disappeared: the options are then to stop, but they can not be selected. In addition, the "sleep mode" does not activate when I close the lid of the computer (even though I already checked in the options it is supposed to do). I hope someone can help with this!

@jessnoun...

Found this...

"Vgasave is that Windows uses when the graphics driver is not present or does not work, or in Safe Mode." Go to the Device Manager and check the status of your graphics card and also check hard goods that could conflict with display usually under 'other devices' or 'Unknown devices' if present. Remember that you have the latest driver from the manufacturer's support Web site. »

Source-> http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/vgasave-is-killing-me/2fe723...

Try it...

Satellite Pro A300 sleep and extended functions does not properly

I have a new satellite Pro A300 PSAJ1E - 01E00VIT, and I find this problem:

Sometimes (not always: maybe it depends on which program is running) in trying to put the computer to sleep or into hibernation, it does not stop, but only stop the monitor (Panel), while the fan goes on and the power light is green. Of course, a lot of energy consumption of battery!

Then there is no other way to take off the computer by pressing the power button for a long time... but this is not correct!
NB: my computer is always connected to a local network, and generally there are some browser windows open when I put it in stand-by mode.

How can I fix?
jomurray

You must update the BIOS and must always close the programs and applications that ruin on the laptop before activating the standby mode or hibernation would be.

I found this solution in this forum, and according to some people here it has solved similar problems

screen brightness blocked after sleep/wake extended in windows vista with HP Pavilion dv6000

Sometimes after recovery mode PC standby or Hibernate, the brightness of the screen is locked up and I can't change it.

Nothing happens when I adjust the brightness setting in power or with FN + f7/f8 options.

Even when I remove the power cable and operate on battery rest brightness up

The only way to fix this is to completely restart windows vista.

This happens not all the computer returns from sleep/hibernate, but it happens frequently.

I have all the latest drivers for:

http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2093&LC=en&cc=us&DLC=en&product=3466864&lang=en

using

NVIDIA GeForce series video driver 7.15.11.5665 has,
BIOS F.31

I have all the latest important updates from windows update.

Anyone know a fix for this?

For example, is there a way to 'reset' of the screen without having to reboot vista? Once the brightness has been blocked, and I tried to reinstall the driver for the graphics card. The screen resets during the installation process without getting out of vista, and brightness worked normally.

Someone knows a way to reset the screen without having to restart or reinstall the graphics driver?

HP Pavilion 6563, home premium Windows Vista 32.

In fact, I found an easy way to solve the problem without having to restart vista...

I just close the LID and open it back, now I can control the brightness again.

I put the "close cover" - function of "doing nothing" in the powersettings...

Mode-exit sleep and extended

Hello
When my Qosmio X 500 - 10W (windows 7 x 64) is in standby or hibernation mode, I can't on the mode 'sleep' or hibernation mode.
Please, what is the procedure?
Thank you for your response.

Have you ever tried to wake up your laptop? How?

Blocking issues, of sleep and extended Vista

Running Vista Enterprise edition on a HP 6930p with Service Pack 2 installed. Some days, that the machine works well, if I lock it then he out of lock fine, if I left in standby mode, I have to reboot for it to wake up. Other times I hit ctrl + alt + delete and nothing happens, system does not allow me to lock it. Cause then me having to let him sleep on his own, which then means that I have to restart it wound out of mode "Eve". Have turn off Hibernate that too did not work for me. Apply all patches, patches and do it yourself links I can find on the site of microsoft and the knowledge base. If anyone has a better solution, circumvent or difficulty apart from reinstalling Vista, please let me know. It is an end-user machine and has been a problem since giving him the laptop with Vista installed.

The machine itself is built from a brand image and not really tested before the user receives. The question also not spread wide which means we have a lot of users with similar HP and vista, but not the problem. This leads me to believe that a driver problem is to blame or maybe a setting within the system itself. I did the BIOS update and patches installed and used the latest drivers from the HP site. This seems to fix the problem at the time, but I have a particular user that this keep recurring with. Any other suggestions would be great, thx

Blue screen to wake up from the sleep and Hibernate in Windows 7

I had this blue error message screen "kernel_data_inpage_error" to wake up from hibernation in wndows 7. I tried to reinstall windows 7, but the problem persists. Please advise the steps to solve this problem.

Hi Zen81,

Thank you for your message.

I suggest to perform a clean boot to see if a startup program may conflict with the RESUME from hibernation/standby state:

Clean boot

http://support.Microsoft.com/kb/929135

If you have no luck with it, you can test your profile for corruption:

http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Sleep and extended booklet

My libretto U100 wake up after going to standby or hibernation. If anyone else has had this problem and if so any suggestion on how to fix?

Any help would be appreciated.

Hi Anthony

I checked all the options on my friends book and everything works fine. I also checked all the options of the electric tool under the Action of Setup (manual configuration) tab.

Your device comes pre-installed with a Toshiba recovery media?
Try to remove the tool and install it again.

How to activate the sleep and Hibernate functions?

I think the image to explain my problem!

Hello

This should help you.

"Sleep and extended: frequently asked questions.

http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

See you soon.

Sleep/wake extended options greyed out

I have a HP Compaq Presario CQ61 - Windows 7 64 bit. My sleep and hibernate options in the start menu are grayed out. I thought it was a problem with my video card, and when I go into Device Manager there is a yellow bang next to my called Mobile Intel (r) 4 Series Express Chipset Family display adapter and below it is written: this device cannot find enough free resources that it can use. (Code 12) If you want to use this device, you will need to disable one of the other devices on this system. I tried to update the display adapter according to HP I have the latest driver, so I have no idea what to do? My laptop used to have installed vista, but my hard drive failed, I got a new one installed with Windows 7 and since I got Windows 7, this problem occurred. Help would be much appreciated!

[Moved from comments]

Hi Sam,

A power plan is a collection of hardware settings and system that manages how your computer uses and conserves energy. Power management can save energy, maximize system performance, or balance conservation of energy with performance.

Let us try these methods.

Method 1.

You can run the troubleshooter of power to set your computer's power settings. The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'. These settings can help you save energy and extend the life of the battery in your computer.

Open the power Troubleshooter: http://windows.microsoft.com/en-in/windows7/open-the-power-troubleshooter

Method 2.

You can create a new power plan and check if that helps.

Change, create, or delete a power plan (scheme): http://windows.microsoft.com/en-in/windows7/change-create-or-delete-a-power-plan-scheme

Additional information.

Power plans: frequently asked questions: http://windows.microsoft.com/en-in/windows7/power-plans-frequently-asked-questions

Sleep and extended: frequently asked questions: http://windows.microsoft.com/en-in/windows7/sleep-and-hibernation-frequently-asked-questions

Response with the State of the question and we will be happy to offer you our help.

Sleep and Hibernate works not properly

Hello
I have a laptop HP running Win7 64 bit which has developed a problem when you use power-saving features and ensures extended. I rarely stop or restart the system and very rarely use Hibernate, opting instead for simply use sleep function when I close the lid. Stop and restart both to perform as expected, but whenever I try to use the sleep function, either by closing the lid or via the options on the start menu, simply, the screen goes black and the laptop runs - the fan is on and the hard drive light flashes sometimes. I waited for about ten minutes, but nothing changes. Then, when I lift the lid to wake the system, nothing happens and I have to do a closed hard. The same thing happens with the Hibernate.

I used the system restore already to try to resolve, by choosing a restore point, a few days before the recent updates or system changes, I did but the problem remains.

I also changed the settings in the power settings to try to solve the problem, but once again failed to do.

I turned it off Hibernation using start, run, powercfg-h off but once again, this has not fixed the problem. >

Any advice greatly appreciated.

Hello

Check with HP Support, their online documentation and drivers, and their known forums
questions.

Support HP & drivers
http://welcome.HP.com/country/us/en/support.html

Contact HP
http://welcome.HP.com/country/us/en/contact_us.html

HP forums
http://h30434.www3.HP.com/PSG/

------------------------------------------------------------

Follow these steps to remove corruption and missing/damaged file system repair or replacement.

Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

sfc/scannow

How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

Then run checkdisk (chkdsk).

How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html

-----------------------------------------------------------

More that might help.

References to Vista also apply to Windows 7.

Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on
Modem and so on.

Windows 7 problem with sleep and Hibernate Options - see the troubleshooting section
http://www.computerperformance.co.UK/Windows7/windows7_sleep_problem.htm

Troubleshooting Windows Vista sleep and Hibernate (also Windows 7)
http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
(also Windows 7)
http://support.Microsoft.com/kb/950686

Sleep and extended: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

May need to reset all to default power settings and then place back as you prefer.

How to solve a problem of Standby Mode Vista and a solution (also Windows 7)
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

How to disable and re-enable hibernation on a computer that is running Windows http://support.microsoft.com/kb/920730

How to restore the default settings of the power Plan in Windows 7
http://www.SevenForums.com/tutorials/950-power-plan-restore-default-settings.html

How to change the power Plan settings in Windows 7
http://www.SevenForums.com/tutorials/778-power-plan-settings-change.html

How do I change the sleep settings in Windows 7
http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

How do I change the sleep settings in Windows 7 (including hybrid sleep)
http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)

May need to reset all to default power settings and then place back as you prefer.

=======================================================

If necessary after trying the above, (this won't help if all settings are always wrong).

Try a repair Installation which should allow you to maintain programs and the same data if
redundant backups are always a good idea.

How to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.html

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Windows 7 auto mde sleep and hibernation does not

Hello

I am Windows 7 64 bit Home Premium SP1 - computer laptop ASUS K55A and automatic sleep mode / hibernation does not work.

Please tell us what to do to fix.

Thank you

Lynne

Thank you for your time and your answers...

I ran the Microsoft Fix It and now everything seems to work very well. . sleep/wake extended and even the screen saver is now working.

I am a very happy customer.

Difficulty of MS is an excellent solution - and easy to use.

See you soon
Lynne Carter

Problems with sleep and stopped after upgrade to Windows 10

Hello

So I'm going to sleep problems and stop once I have upgraded to Windows 10 laptop won't sleep or stop correctly. The screen turns off, but the power LED remains lit and fan as well. If I chose the sleep he wakes up little matter what I try, and I have to make a hard stop at every time.

Any solution to this problem?

Thank you.
1. Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
4. Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver. If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
5. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver. (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
6. Change back the setting of Windows Update Services to manual automatic (delayed start).
7. Restart your computer.
8. Rejoice! You can finally sleep and stop again.
-DanG

Wake up the Qosmio F50 - 10G system mode 'sleep' and boots account locked window

Why when the laptop is put to sleep and left for a while, flashing light and stops when you press the power button / laptop will wake up showing the BIOS screen then boots in the window account locked?

Why I get this is event viewer? Source ACPI
The embedded controller (EC) data returned when none was requested.
The BIOS may try to access the European Community without synchronization with the operating system.
These data will be ignored. No further action is necessary; However, you should check with the manufacturer of your computer for an updated BIOS.

When Windows 7 starts, the icons on the desktop, menu start and records are white then start then normal fill when seen once again, any reason why?

I used Windows 7 drivers.

Thank you

Hey mate,

I have too many Qosmio F50 and you can change the option if, after hibernate or stand-by the account should be locked or not. As far as I know that this can be changed in power management.

About this window of Event Viewer, I never heard talk about this and my Qosmio F50 works fairly well with Windows 7. You have installed all the drivers for it? You have yellow exclamation marks in Device Manager?

I also used Windows 7 drivers, but did you download from the Toshiba page? These drivers are pre-tested and normally should work pretty well.

Sleep and extended in Windows XP

Similar Questions

Maybe you are looking for