Sleep and extended booklet

Similar Questions

• sleep and extended problem solved!

  Hi all.
  Finally I solved my problem (see "sleep and extended in windows XP" for more details).
  I uninstalled everything on HP printer because Windows XP plug-and-play service does not load the Power Manager settings if it is not the printer.

  Now I understand why the HP software does not work properly, you know?

  See you soon.

  Gianluca

  It seems that the HP software has adopted some features of the operating system. Normally, it is very good for the manufacturer to give the features more functions.

  But if there is a third software such as Power Saver from Toshiba could occure problems because the energy saver adopts XP power settings and it administer very dominate. If the HP printing software was not able to adopt the settings of MS!

  Hans Bye

• Sleep and extended in Windows XP

  My computer will not sleep or hibernation any more (maybe if I installed a HP psc). I want to know why.
  Thank you
  HP psc = HP printer Scanner Copier

  [Edited by: admin on 16/09/04]

  Do you know how can I restore the stand-by and extended functions?

• Sleep and extended modes disappeared!

  Hello! All of a sudden, the sleep and hibernation modes have disappeared: the options are then to stop, but they can not be selected. In addition, the "sleep mode" does not activate when I close the lid of the computer (even though I already checked in the options it is supposed to do). I hope someone can help with this!

  @jessnoun...

  Found this...

  "Vgasave is that Windows uses when the graphics driver is not present or does not work, or in Safe Mode." Go to the Device Manager and check the status of your graphics card and also check hard goods that could conflict with display usually under 'other devices' or 'Unknown devices' if present. Remember that you have the latest driver from the manufacturer's support Web site. »

  Source-> http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/vgasave-is-killing-me/2fe723...

  Try it...

• Satellite Pro A300 sleep and extended functions does not properly

  I have a new satellite Pro A300 PSAJ1E - 01E00VIT, and I find this problem:

  Sometimes (not always: maybe it depends on which program is running) in trying to put the computer to sleep or into hibernation, it does not stop, but only stop the monitor (Panel), while the fan goes on and the power light is green. Of course, a lot of energy consumption of battery!

  Then there is no other way to take off the computer by pressing the power button for a long time... but this is not correct!
  NB: my computer is always connected to a local network, and generally there are some browser windows open when I put it in stand-by mode.

  How can I fix?
  jomurray

  You must update the BIOS and must always close the programs and applications that ruin on the laptop before activating the standby mode or hibernation would be.

  I found this solution in this forum, and according to some people here it has solved similar problems

• Blocking issues, of sleep and extended Vista

  Running Vista Enterprise edition on a HP 6930p with Service Pack 2 installed. Some days, that the machine works well, if I lock it then he out of lock fine, if I left in standby mode, I have to reboot for it to wake up. Other times I hit ctrl + alt + delete and nothing happens, system does not allow me to lock it. Cause then me having to let him sleep on his own, which then means that I have to restart it wound out of mode "Eve". Have turn off Hibernate that too did not work for me. Apply all patches, patches and do it yourself links I can find on the site of microsoft and the knowledge base. If anyone has a better solution, circumvent or difficulty apart from reinstalling Vista, please let me know. It is an end-user machine and has been a problem since giving him the laptop with Vista installed.

  The machine itself is built from a brand image and not really tested before the user receives. The question also not spread wide which means we have a lot of users with similar HP and vista, but not the problem. This leads me to believe that a driver problem is to blame or maybe a setting within the system itself. I did the BIOS update and patches installed and used the latest drivers from the HP site. This seems to fix the problem at the time, but I have a particular user that this keep recurring with. Any other suggestions would be great, thx

• Mode-exit sleep and extended

  Hello
  When my Qosmio X 500 - 10W (windows 7 x 64) is in standby or hibernation mode, I can't on the mode 'sleep' or hibernation mode.
  Please, what is the procedure?
  Thank you for your response.

  Have you ever tried to wake up your laptop? How?

• How to activate the sleep and Hibernate functions?

  

  I think the image to explain my problem!

  Hello

  This should help you.

  "Sleep and extended: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  See you soon.

• Sleep/wake extended options greyed out

  I have a HP Compaq Presario CQ61 - Windows 7 64 bit. My sleep and hibernate options in the start menu are grayed out. I thought it was a problem with my video card, and when I go into Device Manager there is a yellow bang next to my called Mobile Intel (r) 4 Series Express Chipset Family display adapter and below it is written: this device cannot find enough free resources that it can use. (Code 12)  If you want to use this device, you will need to disable one of the other devices on this system. I tried to update the display adapter according to HP I have the latest driver, so I have no idea what to do? My laptop used to have installed vista, but my hard drive failed, I got a new one installed with Windows 7 and since I got Windows 7, this problem occurred. Help would be much appreciated!

  [Moved from comments]

  Hi Sam,

  A power plan is a collection of hardware settings and system that manages how your computer uses and conserves energy. Power management can save energy, maximize system performance, or balance conservation of energy with performance.

  Let us try these methods.

  Method 1.

  You can run the troubleshooter of power to set your computer's power settings. The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'. These settings can help you save energy and extend the life of the battery in your computer.

  Open the power Troubleshooter: http://windows.microsoft.com/en-in/windows7/open-the-power-troubleshooter

  Method 2.

  You can create a new power plan and check if that helps.

  Change, create, or delete a power plan (scheme): http://windows.microsoft.com/en-in/windows7/change-create-or-delete-a-power-plan-scheme

  Additional information.

  Power plans: frequently asked questions: http://windows.microsoft.com/en-in/windows7/power-plans-frequently-asked-questions

  Sleep and extended: frequently asked questions: http://windows.microsoft.com/en-in/windows7/sleep-and-hibernation-frequently-asked-questions

  Response with the State of the question and we will be happy to offer you our help.

• Sleep and Hibernate works not properly

  Hello
  I have a laptop HP running Win7 64 bit which has developed a problem when you use power-saving features and ensures extended. I rarely stop or restart the system and very rarely use Hibernate, opting instead for simply use sleep function when I close the lid. Stop and restart both to perform as expected, but whenever I try to use the sleep function, either by closing the lid or via the options on the start menu, simply, the screen goes black and the laptop runs - the fan is on and the hard drive light flashes sometimes. I waited for about ten minutes, but nothing changes. Then, when I lift the lid to wake the system, nothing happens and I have to do a closed hard. The same thing happens with the Hibernate.

  I used the system restore already to try to resolve, by choosing a restore point, a few days before the recent updates or system changes, I did but the problem remains.

  I also changed the settings in the power settings to try to solve the problem, but once again failed to do.

  I turned it off Hibernation using start, run, powercfg-h off but once again, this has not fixed the problem. >

  Any advice greatly appreciated.

  Hello

  Check with HP Support, their online documentation and drivers, and their known forums
  questions.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------

  More that might help.

  References to Vista also apply to Windows 7.

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on
  Modem and so on.

  Windows 7 problem with sleep and Hibernate Options - see the troubleshooting section
  http://www.computerperformance.co.UK/Windows7/windows7_sleep_problem.htm

  Troubleshooting Windows Vista sleep and Hibernate (also Windows 7)
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  (also Windows 7)
  http://support.Microsoft.com/kb/950686

  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Standby Mode Vista and a solution (also Windows 7)
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to disable and re-enable hibernation on a computer that is running Windows http://support.microsoft.com/kb/920730

  How to restore the default settings of the power Plan in Windows 7
  http://www.SevenForums.com/tutorials/950-power-plan-restore-default-settings.html

  
  How to change the power Plan settings in Windows 7
  http://www.SevenForums.com/tutorials/778-power-plan-settings-change.html

  How do I change the sleep settings in Windows 7
  http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

  
  How do I change the sleep settings in Windows 7 (including hybrid sleep)
  http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  =======================================================

  If necessary after trying the above, (this won't help if all settings are always wrong).

  Try a repair Installation which should allow you to maintain programs and the same data if
  redundant backups are always a good idea.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7 auto mde sleep and hibernation does not

  Hello

  I am Windows 7 64 bit Home Premium SP1 - computer laptop ASUS K55A and automatic sleep mode / hibernation does not work.

  Please tell us what to do to fix.

  Thank you

  Lynne

  Thank you for your time and your answers...

  I ran the Microsoft Fix It and now everything seems to work very well. .  sleep/wake extended and even the screen saver is now working.

  I am a very happy customer.

  Difficulty of MS is an excellent solution - and easy to use.

  See you soon
  Lynne Carter

• my monitor is in "sleep" and he can't get out

  I have a HP 2009 m monitor is stuck in mode 'sleep' and he won't come out of him. I tried all cables cords, turn on and off the computer since I can only turn off by forcing it to restart I hit all the functions on the screen and he wakes not it I cannot enter in the computer to see whatever it is just a black screen.just lately I have made a download and it works after download , but I noticed that the monitor was Granie. Help, please!

  Hello! You could try a reset of the power. It helped me a few times on older computers in my village.

  Shut down your computer. Unplug your Tower from the socket. Hold the power button for 30 seconds with the Tower disconnected from the mains. Plug the power cord back into the tower. Hold the power button until the lights are we (5seconds)

  This clears the memory and discharge capacitors. It works for me. If your monitor has gone bad, it's another story. You will need the excess to another monitor.

  Dokie!

• NB520, NB550D - how to set the volume to the State of sleep and music?

  I'm looking for an opportunity to adjust the volume to the State of sleep and the music...
  The mere fact that I noticed is that volume depends on the defined level when the computer was working. But how do I change the State of sleep and the music when the comp is off swich?

  Hi communication,

  I checked the user manual and found the following information:
  The volume control and mute setting may be different between the Windows mode and the mode of sleep and the music. Before connecting the audio device to the computer, turn down the volume of the audio device. Sound quality can also be different.

  So based on this information, you will need to adjust the volume in Windows, but it might be a little different. I have not found any information on the change of volume in sleep mode and music.

• Cannot turn off option "sleep and fresh."

  I can't turn off the option "sleep" and fresh. I did not need, and it disrupts the functioning of my scanner. Apparently, we should have two types of USB ports: with the sign 'Flash' (used for the options 'sleep... ") and normal. I have on the left side of my black ports two laptops and Satellite on the right two blue ports.

  I can't find the sign "lightning" anywhere and sleep... ' icon appears whenever I plug the scanner; This happens for all 4 ports. I entered the "sleep...". ' Set up the menu and try to disable this option, but it does not work. I tried to uninstall the option "sleep...". ', but it does not appear on the list of programs, you can uninstall.

  We should be able to completely eliminate the options that it is not necessary, but I can't manage it.
  Dan

  Hi Dan

  Sleep and charge option can be disabled in the BIOS settings. Have you tried to do already?

• Sleep and charge utility does not work on Satellite C850-B763.

  Hello

  I have Toshiba Satellite C850-B763 unique language of windows 8.

  When I try to run the sleep and cool service I get the message "unable to get hardware information.

  After clicking ok, I got the sleep and Charge Control Panel, but boxes are disabled and the battery bar works very well.

  Can you please help?

  Hello

  First you should check if s for computer laptop USB port support the Sleep & Charge feature.
  USB ports support load & sleep are marked with a small sign of flash.

  Here a nice Youtube clip on "Sleep and Charge" feuture
  http://www.YouTube.com/watch?v=tJhLOfJybmQ

  In the case of the laptop supports this feature, you should take the next step and must check if sleep & support is enabled in the BIOS.
  To access the BIOS, press F2 during the turn on/off the unit.
  Note: the device should be turned off (hybrid closed must be disabled)