Mode of nightstand without charger

Similar Questions

• Can u put the Apple Watch mode bedside table without getting the dock?

  I Haz one question I am about to get a Apple Watch for my birthday

  question, version 1

  can u put the Apple Watch mode bedside table with the original charger, or get the dock from Apple?

  Hello

  Yes - you can put Apple Watch mode table bedside without having to buy the Apple (or other) docking station.

  To place your watch mode bedside table:

  • Make sure the option is turned on: on your iPhone, in the application of the watch, go to My Watch (tab) > General > scroll mode bedside table.
  • Connect your watch to its charger (with power connected):
    • Place your watch on the side with the buttons facing up.
  • To see the time, tap the screen or slightly shift your watch:
    • By design, when the watch is in this mode, pushing even your bedside table may be sufficient.
  • If you also set an alarm with the alarm clock app on your watch, it will warn you at the specified time.

  More information:

  Use the mode table bedside on your Apple Watch - Apple Support

• HP Probook 430 G1 won't work without charger

  Hello!

  I have a HP Probook 430 G1, which is about 1.5 years old. All of a sudden it won't work without the charger plugged. If I leave the charger, it immediately stops and will not start until I plug it again.

  A few days ago my computer would go hours without charging me.

  My computer detects the battery and it's 97% charged.

  Batterycheck HP said that my battery capasity of 42% of what it had when it was new.

  What is the problem? Do I have to buy a new battery?

  42% of what it was to have should be enough to make him stop not immediately after I unplug the charger.

  It seems that the battery died then. IF you have a bad cell, but others are fully charged, reported its possible to get a full charge. You can't really test it properly with the adapter plugged.

  IF Windows is record that the battery in the tool bar, can you draw everything plugged and it shows that the battery is out? IF Yes, then you know that the mobo circuitry does its job.

  If I understand correctly, is not a good idea to fully charge a battery at 100%, nor let him down until the laptop shut. You can set this in your Bios does not load 100%.

  You can do this if you get a new battery.

  Just my 2 cents.

  It will be useful.

• Microsoft Surface Pro does not open in mode full screen without the toolbar on the right projection

  I created an interactive pdf designed for the Microsoft Surface Pro 3, set to open full screen mode. Recently, I think I did something for the preferences settings and now whenever I open the file: (a) I get a warning that it will open in mode full screen (I just want it to open it without the warning); and (b) the toolbar is always right if the presentation is not really in the entire screen. Help, please.

  It's kind of like a dashboard on the right side. The tools that are available are 'tools to fill & sign' (exoanded to: add text, add Checkmark, initial Place, place of Signature). Showing also but not expanded not is 'Send or collect Signatures' and 'Working with certificates.'

  I have been a little more troubleshooting on mine, and now I'm fairly certain that the toolbar appears because the document contains few fields to fill. I removed these items and now the file is opened in mode full screen without the list toolbar.

• HP XT Pro Ultrabook spectrum: Spectrum XT Pro will not work without charger

  Hi all

  Summer look far for an answer to this problem. Made an account here to try to find more answers. So Hello to everyone!

  We have an older spectrum XT Pro notebook that I received from another user. When I got up, the battery was dead, and material UEFI scans indicated that the battery needs to be replaced. After checking the part number on the HP PartSurfer's (part number 685989-001), we decided to order online.

  It seems that HP does not have this battery more, so we found a second-hand on Amazon. After a week or so, the battery came, and I installed it without problems. The system is turned on without the charger (huzzah!), so I leave this weekend to recharge before putting to sea.

  This morning, when I came back to check on the machine, the prosecution was capped at 92%. At first, I thought the battery simply need to be recalibrated, but found that when I removed the charge cable, the laptop is dead immediately. A little worried that the battery I received was defective, I ran once again the analysis of material UEFI. This time, the battery has been reported as OK. Very strange.

  I tried updating the BIOS, UEFI material checking, and the drivers on the machine, but none of them make a difference. I unplugged both the main battery and the CMOS battery, but no change in behavior. I have reset the BIOS settings, but there is no change either. If I do a scan of the battery alone or a full analysis, the system reports that all systems are OK.

  The only other thing I noticed is that the battery we ordered has a sticker with part number 686189-001, which does not match the one we ordered. The search of this part on PartSurfer number takes nothing. Apart from this sticker, the battery itself is identical, with the same voltage and the same power and the same number of secondary part of the 685855-1 b 1. I guess that it is possible typo, and batteries are indeed identical parts.

  If anyone has any ideas why this machine is not working off battery power, I am open to try. The system reports to a high battery Windows, but simply refuses to take this battery when I unplug the charger.

  An update:

  So I contacted HP on the battery, and they decided to ship a brand new! After installation, the new battery seems to work just like new. Success!

  Not sure what was wrong with the old, but happy that I was able to get a fix.

• Compaq does not start without charger

  First of all:

  Product name: Compaq Presario CQ57 301SA

  Operating system: Windows 7 Home Premium (64-bit)

  My problem is that whenever I try to boot my laptop with only the battery as energy source, it does not start. The equipment starts and everything, but displays only a black screen. No flashing in the keyboard and the power led is displayed.

  If I plug in charger and connect it to the laptop, which is the only time that the contineus to laptop to display the startup process.

  At first I thought that there may be a problem in the battery, but it is completely charged (100%), said the HP battery check is OK, and whenever I remove the charger after startup and the logon Windows stage, the laptop does not turn off.

  Just for the background story: I recently sent my HP laptop for hardware failure and they replaced my motherboard. When I picked up, they turned on without the charger plugged and it starts up successfully. When I turned it on in my own home, this happens.

  Any thoughts?

  Thank you.

  Hello Kazu081,

  Did you get this resolved? I thought that since you had the motherboard replaced, and that's when your troubles started, you must call and speak with a representative.  Let them know what is happening and please let me know the results.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Good luck!

• Simulator running in mode of development without a password

  I used the Blackberry 10 Simulator without hassle, until I decided to disable temporary development mode to see how the application works in a real situation.

  When I tried to re - turn on the Mode of development, the system required to enter the password for the device. Where the trouble started: you can disable the password device, but not in the development, mode, whereas without the Simulator development mode is completely useless.

  Simulator reinstalling did not help. Moreover, this password, like a real virus spread to the other Blackberry VMs Simulator, where I entered forever any password!  It seems that the password is stored in the world not for a particular virtual machine.

  Now every time that I start to any Blackberry 10 VM (and I always turn off, because "suspend" takes forever to come back), I need to enter the password when I use command line tools, I still need to enter the password! This is a nightmare!

  You'll make my day, if you can help me to get rid of the password (without having to reinstall Windows) and that any return to normal

  Concerning

  When you re-installed the Simulator, after the uninstall guaranteed you that the entire Simulator installation directory has been deleted?  If this isn't the case, it could be re - use something from the previous installation.

  A relocation would be the only way to solve it.

  Note that to disable development mode will not change the way in which your application is running in the Simulator.

• iOS package hangs in any mode of compiling without debugging

  Hello

  I'm really looking for ideas on where to start looking!

  This is the situation:

  I'm migrating a large enough flex, web project for mobile. He is the third generation and I had the whole thing working at different times in different forms. It loads the channels via the resource group and content through external SWF content.

  I've recently converted to use a view architecture so I load in the main application view after a selection process - which means that there is much faster startup and better performance in general. It works very well in the following compilations:

  1 compile for Android (all kinds)

  2 compile for iOS debug (fast)

  3 compile for iOS debug (standard)

  BUT:

  If I compile ad hoc distribution IOS, I see the following:

  1. initial view of the charges, display resource bundle strings

  2. when I go to the main product view:

  -SWF fails to complete the charging process and hangs with no bundle strings visible resources

  -incident occurs before the addition of the navigatorContent buttons that I defined in the base of the product State

  In other words, something that works in subject other settings and compilation options, simply will not progress when they are packed for an iOS release.

  I'm a bit of a loss. I am aware that iOS cannot sustain the bytecode and works on the elimination of that, but I run using this with bytecode simply ignored, which is very well that I won't here either. I also tried to substitute for the JPEG content, but the question below always seems to be present. I also tried to remove the loaded font files - yet, they did not, but the problem has simply ignored when I got the product as the main rather than a subview.

  Does anyone have any idea what could be the cause?

  Thank you

  G

  I have it.

  I used the Swiz (which is awesome, btw) framework and compilation of the library of Swiz rather that to use the CFC that I needed a change to the base, I forgot one of the metadata tags since the compiler args - for some reason, recovered by operating in any other mode of compilation, it crashed when running in release mode.

  G

• Apple Watch without charge for more than 1 month.

  So I have not loaded my Apple Watch in 1 month, and when I tried to load, I loaded 3 days in a row and it still won't turn, no, it is not the charger, I tried force restart with digital Crown and side button and still nothing, then I was stupid enough to cancel the twinning of the Apple Watch with my iPhone thinks it would work somehow , and now I can't reset it, so dumb. I can't connect to iTunes either, I'm so lost and confused, I just had this Apple Watch for about 2 months for my birthday and I don't know what to do. I have tried every thing on the web to force reboot to restore the entire Apple Watch. Please if anyone knows, please tell me, literally I am desperate for your help, thank you in advance.

  Hello

  Given the steps you've already tried, I suggest you contact Apple Support (mail service may be available) or make a booking Genius Bar in order to have your watch checked under warranty:

  Contact - Support official Apple

  https://Twitter.com/applesupport

  http://www.Apple.com/retail/Geniusbar/

• Hi I have windows 7 Home Edition premium, I need to put the Russian folder names can I do this without charge last?

  Hello

  I have windows 7 Home premium and you need the folder in Russian without the big names spend of ultimate?
  my girlfriend needs to use the laptop...
  best regards Richard

  I think you will find that you need ultimate in order to install the language packs. (ditto for win8)

• Windows 7 XP virtual mode in place without success.

  I downloaded Windows XP for my Windows 7 Pro SP1 (64-bit), everything goes, when up to the first round, where the Installer run all the way to the end and then reports the installation of XP Mode is unsuccessful. There is no error number just a suggestion to try again, I have several times. All the tools and controls of spend for compatibility and quality. Any ideas?

  "Step 2. My PC BIOS does hardware support for virtualization, and is it turned on? »
  Help: Configure the BIOS for hardware assisted virtualization PC
  http://www.Microsoft.com/Windows/Virtual-PC/support/configure-BIOS.aspx

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Have you tried to clean your Temp folder, you can do this by typing folder in the Start Menu RUN box.  This will open your Temp folder, there, you can remove all Windows will allow you to do.

  It may be necessary to show both hidden and system files and also uncheck 'Hide known file types' in Control Panel / folder Options / view to navigate to the mentioned location of Temp.

• G1 and G2 of spectrum spectrum: the support of HP 1800-970-0394 - without charge-free | Call for technical support | HP printer technical support |

  We have 2 spectrum. Both generated bluescreens throughout the day. everything is updated. BIOS, drivers, we have used install original HP on the ssd - 30 times of the new cd installations, company W10, company LTSB W10, CD-ROM software HP, NOTHING. The same bluescreens again and again. Also - the monitor on the G2 model becomes black and continues in the same second.

  does every 10 minutes it 1 time. never saw on the G1 model.

  The source of the bluescreens every time is another - Olivier sound ntfs.sys bluescreen, Olivier grafic, blue screen memory. HP what happens?

  HP - it is the least expensive and most of the materials pc and laptop worse on this planet.

  New spectrum G2 Modell: bluescreen, bluescreens with audio disabled windwos, new driver installed - bluescreen, disabled by windows 10 - spectrum rerun while 2 h and blue screen of the driver of the motherboard. Now - new wlan driver of HP original - installation failed, failed, failed to install. Oh no - not installed manually - installed by HP support assistant! He said the success of the Installation - and the same message - installation failed and you need to reinstall.

  The two Modells spectrum amounting to 90 degrees cpu in IDLE MODE. incredible stupid thermal management.

  HP - please STOP BUILDING PC COMPUTER. You have NO intelligence in the PC. Your laptops PC PORTENDS even worse hardware. Back to server systems - this is something you really good.

  I love your server. But your are the Builder of PC/Notebook/Tablet never seen worse.

  ?

• How can I stop Firefox toolbar pop up when the mouse is above the screen mode full screen (without kiosk mode, please)?

  I don't want the toolbar always there (so disable auto hide does not solve the issue). I would prefer a right-click or use a combination of keys to retrieve the toolbar. The toolbar arise at any time that the mouse is near the top of the screen is too distracting. It should be an option, users can enable or disable or card for anything other than the mouse hovering. The only solution I've seen mentioned is to go the full kiosk with something like R-kiosk, but it's really a too extreme solution to a simple problem. Is there a setting already hidden in the topic-config for this problem or is it a feature request? Thank you.

  There is no built-in way to disable this feature to display the toolbars when you move the mouse to the top.

  Add code to the file userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #fullscr-toggler { display:none!important; }
  

  The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
  • Use a text editor like Notepad to create a userChrome.css (new) file in the folder chrome (file name is case sensitive)
  • Paste the code in the userChrome.css file in the Editor window
  • Make sure that the userChrome.css file starts with the default @namespace line
  • Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as userChrome.css.
    Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not userChrome.css.txt file

• + Stor.TV without charger

  Since I bought my camera after startup, when I clicked on the icon for the HARD drive I got an error 'No Loader' but after a wait of a few seconds, when I tried again it is not working properly. This week the error does not disappear, all other icons work fine.
  I can still access the device through the USB connector as a slave to my laptop.

  Is it possible to recover it?

  Thank you.

  I put t have this feature and cannot help a lot but check s manuals first. Maybe are some type of reset possible.

  Alternatively, you can contact Toshiba s hotline or more close service authorized and ask for help.

  If you have success with this problem thanks for posting comments.

• If a school purchases used computers that have been rubbed HDD, can use the supplied with the PC COA product key to reinstall the same OS on the computer without charge?

  One of my clients wants to buy a computer at the end of the lease that had the deleted o/s.  They want to know if they can use the product keys from sticker COST units to re - install the o/s legally.  Since it is a COA OEM license moves with the PC or is it exclusive to the first owner?

  Hi JHoffman1947,

  The OEM (Original Equipment Manufacturer) license is for the computer. If the computer is sold to another user, then the license is valid for the new user. The former user is no longer the owner of the license.

  See the following article for more information. Find the section of transfer of license for your scenario.

  FAQ - Microsoft license