Model in Question
Dude, I created a typical model complecated no, my main content area is therefore a simple left and right div I made be changed slowly. It's very good for my main pages, but as I go further in my site I don't need one large surface to accommodate everything I have. But as you know is locked and cannot be changed by the model, which in turn changes all pages. ANY IDEAS?
Is it possible to have two templates for this or this would mess up the flow.
Mark
I think what you're looking for is "nested models '... However, from what I read, they can become messy and confusing.
http://help.Adobe.com/en_US/Dreamweaver/10.0_Using/WScbb6b82af5544594822510a94ae8d65-7aa0a .html
Tags: Dreamweaver
Similar Questions
-
VCenter datastore model card question
It is perhaps more a matter of functionality of feature. I've deployed a device vCenter and 3 physical hosts connected. vMotion has not been activated yet so that the servers are autonomous.
I created a template on server 2 to deploy virtual machines. There was a file name and network boot / iso associated with the model. The model has been used to deploy the VM to the Server 3. There are a few complaints from the wizard on the iso and the different not available due to the physical host network. The model deploys very well and the virtual machine is then updated with the correct DVD and network information. The warehouses of data on both servers are local to that time.
My question is, although he seems to have absolutely no connection with the data store, the plan stresses the relationship between the data store on server 2 with the VM on the Server 3. Is it correct to say that this is due to the original still on server 2? All disks, DVD, network, etc. on the deployed vm are local to the Server 3.
Put the server in maintenance mode 2 has zero impact on each virtual machine running on the Server 3. Maybe KNOCK me, but I'm curious and I can't seem to find the answer.
See the attachment for more details.
Thank you.
The problem came from snapshots, which contained references to the old host. Once those that have been deleted, the map display correctly.
-
Style of model/library/question (s)
Hi all
So I try to burn a DVD on Encore CS6
Everything goes well outside of my layout and model options are not there.
I installed the two software packages. See the images-
When I load upwards even I get nothing - see picture
What's going on--does anyone know? I looked through previous questions but have found no solution.
Go to preferences in the still and watch the location still will use to find such things. It's my preferences of Win7.
While you can put the library anywhere you want, I'd rather put where again search by default.
If this does not help, use Windows explore to look at this place. Y at - it the library folder? Is there something in it?
Next steps depend on what you find.
-
Hey guys, I am an intern in a non-profit and they put me on day of their Web site. I've been designing Web sites for a while, but I have a question which I stem, probably because I haven't used Dreamweaver templates have long before. My boss wants to be able to update the header/footer and put her updated on the entire site, which would be no big deal normally except that it uses also a model that has 6 different layouts to choose from, which is a home, contact, blog, page etc, everything she is planning on using.
My original plan was to make 6 different pages based on the template of original house I did, copy and paste the code of 5 other patterns to make them identical to the 6 page layouts that came with the model, and then just duplication regardless of the provision was necessary for each individual page. However, I discovered that a duplicate of a page based on a template does not automatically update as the page it is the replica would be. Is there a simple way to get around this? My boss is adamant about only having 1 header/footer to change, not 6, so I really need to get this figured out. Thank you very much!
DW templates (.dwt files) have very specific and child uses Pages created must be created by using the appropriate method. Be sure to completely familiarize yourself with models DW here: https://helpx.adobe.com/dreamweaver/topics.html#dynamicpod_reference_11 before attempting to use them. They can jump into your face fairly quickly.
You could use proabbaly library items for what you do: http://webdesign.about.com/od/dreamweaverhowtos/a/aa090406.htm
Personally, I would use SSI or PHP includes rather than models or elements of library if it was me.
PHP includes: http://www.tizag.com/phpT/include.php
SSI includes: http://webdesign.about.com/od/ssi/ht/htssiincludehtm.htm
-
BI Publisher data model / query question
Hello
I'm designing a report of BI Publisher where I need to show negative numbers in red. I'm perfectly fine with the help of the conditional formatting to do this (just using the default value is conditional formatting in the add-in in MS Word, that generates code like this:)
<? If: number(Cost_-_MTD) < 0? > <? attribute@InContext:color;' Red '? > <? end if? >
BUT...
I have columns returning who sometimes have a NULL value in them, and when they have the value NULL, it causes the foregoing to the pipe upwards. So I thought, 'I'll just add IfNull() in queries defined in the model data, and who will take care of the problem... "
that works - a little. Now, my problem is if I have to go back and change the query for some reason, I get an error "query cannot be parsed, please modify the query manually. I really don't want to do that, I wish that other developers do NOT have to manually change the queries.
So my question is - is it possible to add in the IfNull() directly in the query designer, so it should not be changed manually from that moment?
p.s. using IfNull OBIEE server as our data source.
Thanks in advance,
ScottI don't think there is a way to add the ifnull condition in the query designer. So, you will need to manually change the query...
In your model so you can add additional control like this:
<0?>...Thank you!
Published by: BIPuser on Sep 17, 2010 09:20
0?> -
This means that the model of mod 10.1 iMac was made in early 2010? I was wondering if this mod is compatible with the Sierra.
Yes, late 2009 to mid-2010.
http://www.EveryMac.com/ultimate-Mac-lookup/?search_keywords=iMac10, 1
And Yes, it is compatible with the Sierra.
1736 http://www.Macworld.co.uk/Feature/Mac-Software/Will-My-Mac-Run-Mac-OS-Sierra-352.
-
IPAD (model MD367LL): question since the first IPAD AirPrint
Function AirPrint won't print in the bar in small print on printer HP MX922. On my IPAD2, printing as ok - still print to tray great impression.
Hello
HP have no any model of MX922.
Can refer you to Canon Pixma MX322?
If this is correct, I suggest you to contact Canon, they will certainly know their best products
Shlomi
-
HP Photosmart Premium c309a MODEL. Questions of fault. Cannot print
The questions got a little worse. with the days there is printing OK. Although the scan not OK. showed through software as any link if there was a connection and the unknown state of the cartridge. and showed with software could not click the scanning control.
Today cannot be printed. Although Wi - Fi paper printing test page which is OK
and
Ethernet connection indicated via this software (HP print and Scan Doctor) as being OK
However. existing problems
canceled the print command. No document via printer deployed
However, with the center of Solutions HP software cannot get other than that screen
Ethernet connection with this software
Tried to find help from the last download to print HP and doctor Scan. However fault issues trying to download
N.b.: wouldn't be an idea to uninstall the HP Total software and. then. install or is there a revision of
HP Print and doctor Scan which would resolve this technical issue
Please let me know
Thank you!
Hi gaz7,.
I'm happy to hear that you were able to get the printer through the USB connection.
You can contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
Thank you.
-
Provisioning of the TMS - the model schema question
Hello
I have read the deployment of TMSPE and tried to find the TMS Provisioning model for new Movi 4.4 schema, however, I could not find anything of cisco.com.
Please help me where I can download the movi and schema of the model from the other end?
Thank you
Hello
This model should be included in the bundle of jabber, when you download jabber 4.4.
Sent by Cisco Support technique iPhone App
-
RTF model - loopback question Word
Here's my dilemma...
I'm entering my template like this XML data (this is just an example of dumbed down):
<? XML version = "1.0"? >
< LABEL_TEST >
< LIST_G_TEST >
< G_LABEL_HEADER >
< NUMBER > 1 < / NB >
< / G_LABEL_HEADER >
< G_LABEL_HEADER >
< NUMBER > 2 < / NB >
< / G_LABEL_HEADER >
< G_LABEL_HEADER >
< NUMBER > 3 < / NB >
< / G_LABEL_HEADER >
< G_LABEL_HEADER >
< NUMBER > 4 < / NB >
< / G_LABEL_HEADER >
< G_LABEL_HEADER >
< NUMBER > 5 < / NB >
< / G_LABEL_HEADER >
< G_LABEL_HEADER >
< NUMBER > 6 < / NB >
< / G_LABEL_HEADER >
< / LIST_G_TEST >
< / LABEL_TEST >
Please keep in mind that the actual data may have hundreds of files.
In my Word RTF model, I have a table with two columns, I need the data to fill in like this:
1 2 3 4 5 6 How can I use a loop in the table to fill the data correctly?
Manny
Watch https://blogs.oracle.com/xmlpublisher/entry/avery_labels
-
Hello illustrators.
Ive done a model as well. and Im trying to achieve circulating in an ellipse
but his leaving gaps between the model. even if you notice in the brush palette it done 2 duplicates of the pattern.
How can I get the bosses in general be States.map without gaps?
Thank you
Simply remove the tail end. don't know what else you try to see here. You have just designed the model in this way. It's like 2.5 repetitions of your shape, not a pure 2.
Mylenium
-
Missing model Manager questions
Hi there, we will have problems setting this up. We get the custom page we have created but still see the default coldfusion information... Here's what we did...
(1) the path set correctly in the administrator Coldfusion & gt; Parameters. "Missing model Handler.
(2) due to the changes in IIS as described here... http://KB.Adobe.com/selfservice/viewContent.do?externalId=95ee04fb & amp; sliceId = 1After a search, I found the problem.
There are pieces in the code that were making reference to session variables.
Of way general application and session variables are not accessible on the missing template Manager.
-
Hi, what I have a problem. When I created a linked e-mail request template, I select target 'request information', and variables, 'list of targets requested for", mailed the variable returns dynamically in the format"first name last name [userid]. But I just want the name of the requested target user information and the name. Is it possible to cut the username here anyway?
Published by: diablokors on 06:44 13.Oca.2010OOTB is not available but you can attach your own code to send the notification with the help of the existing model, but just change the desired part.
Here is sample code to send e-mail notifications
tcEmailOperationsIntf oimEmailUtility = tcUtilityFactory.getUtility (pDatabase, "Thor.API.Operations.tcEmailOperationsIntf");
HashMap emailHash = new HashMap();
emailHash.put ("Email Definition.Name", emailDef);
tcResultSet emailData = (emailHash) oimEmailUtility.findEmailDefinition;
If (emailData.GetRowCount () > 0)
+{+
Students = emailData.getStringValue ("Email Definition.From Type");
Objects = emailData.getStringValue ("Email Definition.Subject");
sBody = emailData.getStringValue ("Email Definition.Body");//Create body
+}+
+ / / Replace anything in the body sBody = sBody.replace (')
tcEmailNotificationUtil tcemailnotificationutil = new tcEmailNotificationUtil (pDatabase);
tcemailnotificationutil.setBody (sBody);
tcemailnotificationutil.setSubject (sSubject);
tcemailnotificationutil.setFromAddress (sFrom);
tcemailnotificationutil.sendEmail (emailAddress);Hope this helps,
Sagar -
I'm curious to know is it possible to have the DDL file editor to generate the table/view/etc. SQL in fashion Long name: relational model name: table-name. The reason for this is when we give our SQL DBA, it is easier to run all the user creates and table creates sysdba user. It would be ncie maker data could do this without having to change the SQL code and adds the name of the relational model SQL.
Published by: user1577386 on August 11, 2009 07:09Hello
I'm not sure that understand the reason. But you can set the user in the physical model and can simply change the name before substitution of name during the generation or the generation of DDL DDL allows to change the user name.
Philippe
-
The left and right columns are listed before the main content, I want the main content to appear in front of them. But when we try to list the main content first, two columns down the main content instead of on the sides where they belong. How can I get the main content to appear before boxes 1 and 2? Help please... anyone! ???
Here is a link to a page, so you can see the code
http://www.running-MOM.com/ShinSplits.html
Thank you
Tracey
If your dosage "lists" is a function of how the divs have been implemented.
It is a common practice (but not write to stone!) to float: left; the bar left side, then float: right; the right sidebar, then allow the main content of 'back' between them.
If you want to change the order, you need to make the main content div the determining factor.
You use a liquid layout; the width of div changes when the size of the window (browser window) changes. You will need to specify a width of the main content div, either in pixels or as a percentage, so you will lose some of this fluidity.
Here is a suggestion of what to do:
- Choose which sidebar will be flexible in width.
We will choose the left. - Make a new div which includes this sidebar and main content.
- Do the new div container (see #2) width: 85%; float: left;
- Change the width of the right sidebar on width: 15%;
- Make a new div for the main content (remember, it's inside a new containing div) and set the width: 70%; float: right;
- Here is the new order of your content:
main content here
Theory: Content hand floats inside the new div container. then the left sidebar floating to his left in the new container.
Floats right sidebar to the right of the container div. news
You may have to play with percentages and margins based on your layout.
Beth
- Choose which sidebar will be flexible in width.
Maybe you are looking for
-
I bought a real Apple Watch off ebay
is it still covered by the standard 1 year warranty and if so how can I sign up for this? Thank you
-
189 45 Mbps Wireless and wired
I have a Huawei recently installed (Optical Network Terminal). When my ISP technician moved, he received 191 Mbps and upload 19.50 Mbps, it worked well for two days... I have a Time Capsule 37 b for a Wi Fi network. And now 45Mbps wireless... Wired
-
HP 5530 Envy: How to clean a leak before installing the new cartridge
I haven't used my cartridge color for a long time, and now I see that the contacts are a little disordered (a few leaks). How can I clean before installing the new cartridge? Q-Tip and alcohol?
-
Hi Forum members, With respect to the vi in LabVIEW 2010 attached, I have problems to get the XY graph to plot my data. Currently the XY graph shows nothing when the program is run. I set the x-axis to read time of the simulation and the value axis
-
Original title: 800ccc0d ERROR FIX Hi people, I am getting an error ("the server is not found") when trying to connect to my news server. Œuvres mail (hotmail) ok, but I can't connect to one of my two news servers I use (teranews and broadstripe). I'