model of custom in DW CS5 Server?

Similar Questions

• Indesign CS3 to Indesign CS5 server upgrade

  Hello

  I searched on the adobe site to check if I can get an upgrade to Indesign CS3 to Indesign CS5 server. I have Indesign CS3 license, but must migrate to Indesign CS5 Server. Does anyone know if it is possible to buy Indesign CS3 to Indesign CS5 server upgrade. Or I have to buy a new license for Indesign CS5 server. Any help on this is appreciated. Thank you.

  This page has an email contact to Adobe, they of course adapt the package to your needs.  And although I don't know for sure I doubt if one individual copy of Indesign CS3 you will give to any upgrade price for CS5 server, given the price would have been started in the region of $20 K...

• [CS5 Server/JSX] Generate the table of contents at the beginning of the document

  Hello

  The following script generates a table of contents:

  
    myTOCStyle = myDocument.tocStyles.itemByName("TOC");
    myMasterSpread = myDocument.masterSpreads.item("A-Master");
    myTocPage = myDocument.pages.add(LocationOptions.AT_BEGINNING, myMasterSpread);
    myIndexFrame = myDocument.textFrames.lastItem();
    myBounds = myIndexFrame.geometricBounds;
    myX1 = myBounds[1];
    myY1 = myBounds[0];
    myDocument.createTOC(myTOCStyle, true, undefined, [myX1, myY1]);
  
  

  When I run this Script on the InDesign CS5 server, it generates a table of contents, but it is not placed on the page just added at the beginning. It is placed on the first page containing the content where the table of contents is generated from. Also the added page at the beginning does not contain the elements of the master page, it's just a page of blanco.

  When I run this Script on InDesign CS5 to office, the table of contents are placed on the first page added with this script. Also, does this page contain master page items!

  How is it possible to place the table of contents (with overflow text) before the first page containing the content. The page that contains the table of contents should contain elements of the master page.

  Sjoerd

  myTextFrame = myStory[0].textContainers[0];
  

  He lacked the monarticle after [0]

• CS5 server crashing on the document close

  Hello guys,.

  I have another little problem with our indesign plugin. With CS4 server the plugin worked well, but on the CS5 server it crashes the server when closing documents with javascript. I think that this could be a problem with the new architecture of multithreading in CS5, but what exactly I need to change to fix this? Which is perhaps a pointer to the document inside my plugin which is not released?

  Thanks in advance!

  It's true, the QueryInterface method increments the counter by references on the Interface, but because you do not release the interface, its refcounter never gets decremented. Use the InterfacePtr template class
  --
  Piotr Maciej Przepiora

  http://Phoibos.pl

• can I do a custom install of cs5?

  Hello

  can I do a custom install of cs5?

  I know it's easy with cs4 and cs3, for example for cs4 is easy, just edit the fileAdobeBridge3All.proxy.xml and AdobePhotoshop11-Core.proxy.xml to make a full custom install

  someone how to do with cs5?

  I'd love to do it

  a PM must also be great

  have a nice day

  I, like you, Mantralightroom, prefer to run a tight ship / have full control on what is installed / located on my pc. Unfortunately the mounting of two (or three if on x 64) files you mentioned doesn't seem to work. So I treated the as I treat Adobe Air, which, even if you say "do not install" always installs.

  If there is no option but to install the bridge, bridge mini and other foreign pieces ' only parts require you while they get treatment for a special haircut, i.e. of the folder of the bits said games ' only pieces, hit the magic button with "Delete", written on it.

  No problem what so ever report so far. Work like CS4 where I could force do not to install.

  I Mystic Thumbs for psd files and ST Thumbnail Explorer for files have to display in my files, same as any other type of image file, which take up a lot less than my property. I don't have Adobe Bridge to organize my image files thanks a lot. I'm a big boy now, I'll do it myself.

  End point.

  Some people like Adobe Bridge.

  Some people like Slug ' doesn't lettuce flavor of ice cream.

  I don't like.

  Elmer B. Fuddled

• Model Plugin problem in loading IDCS6 [Server]

  Hi all

  I made a plugin model to add a few custom in the Indesign scripting DOM EC methods are works fine on the desktop version of cs6 indesign. All methods are visible in the Script Toolkit extend and I can call them also.

  I want to run this plugin on indesign server also. I compiled for the 64 bit version and placed in the Plug-ins folder. The plugin will load in addition, as County total 112 to 113 plugin increases. To cross check whether the plugin is loaded, I did some manipulation of file to save his startup inside IPlugIn * GetPlugIn() in SDKPlugEntrypoint.cpp and it works. But the problem is that my methods are not available in the script Dom of indesign server.

  (1) I built this model using DollyXs plugin and ensured that it supported the two indesign desktop/server.

  (2) I did not use methods such as IDocument * doc = Utils < ILayoutUtils > ()->GetFrontDocument();

  (3) I add methods to the object of the Application of the DOM script.
  

  I used these headers in my source file:

  #include "IApplication.h".

  #include "ILayoutUIUtils.h".

  #include "IDocument.h".

  #include "IUsedFontList.h".

  #include "IDocumentList.h".

  #include "IFontFamily.h".

  #include "IPMFont.h".

  #include "IApplication.h".

  I missed the steps in this procedure?

  Thanks and greetings

  maddy1907

  
  

  
  

  Hi maddy1907,

  in the VersionedScriptElementInfo resource you probably defined products and feature sets to kInDesignAllLanguagesFS. You can replace it with kWildFS.

  Markus

• How to integrate model of custom device controller

  Hello

  I now live a labview including 18 sub controller model, and I am trying to run this controller on RTOS VxWorks, through customized device model.

  1. when I tried to run a model simple controller (ex, a controller with 3 ~ 4 void / screw) on RTOS VxWorks, I just put simple controller in RT Driver.vi model, and then the build and deployment succeeded.

  2. then, I did it with my model of labview in the same way above controller, but I couldn't even build my model controller labview. I don't know why, but the build process stops at the initialization stage. I think that this problem will appear when there are more than 3 ~ 4 sub vis are added under the custom device project.

  Any ways to use a model of controller labview instead of just put a model in RT Driver.vi?

  Now, I managed to build my model labivew, I saw the light of the compactRIO blinked, which measn the connection is ok by CAN - Bus.

  But it's still weird and not possible to build my model at a time. In addition, cannot again build the custom devcie just before successfully built after the addition of two functions simply.

  In any case, the solution to my problem is as below.

  For example, my cruise controller written in labview consists of 3 simulation systems arrive.

  Each system to arrive includes several subsystems.

  First, create the model after adding one of 3 major subsystems. (In this case, I never had errors in the construction of models of labview)

  Secondly, if the first step is ok, add one of the other 2 systems come in the custom device and then build again.

  Thirdly, add the remaining subsystem in the custom device and establish the entire model and deploy it to the target.

  With three steps above, I can still build devices customized successfully.

• Customer count trigger KMS server

  I found lots and lots of messages & discussion about KMS activation and troubleshooting. All of them come down to:

  • ensuring that the client can contact the KMS server
  • The KMS server has been activated with a valid KMS key
  • The number of requests of minimum activation for the requested activation type is filled.

  The main challenge that most people have (based on the number of posts I've found) seems to be that last point: by ensuring that the number of minimum requests is maintained.

  Each solution must be ensuring that unique cmids (the Client Machine ID) exist on the machines making requests; the CMID is supposed to be the unique identifier for the activation.

  Unfortunately, I can prove it in a lab environment that is not true; Another factor is also at play. Here is the procedure to reproduce the failure:

  1. Configure a domain controller in a forest, isolated on an isolated network (so that you don't get noise or accidental activation of KMS servers client)
  2. Set up a KMS server as a domain member in the isolated forest. Install the KMS (slmgr.vbs-ipk {kms key}) key and activate it.
  3. Provision a virtual machine (any hypervisor will do) as a test client (server or workstation) as a member of domain on the isolated domain with a client key generic KMS and the OS that should activate your KMS server successfully. Take a snapshot of the virtual machine, then you can go back to the original state, before the meter to "rearm" is reduced (Windows7/Vista and Server 2008/2008R2 only allow 3 rearms, thus returning is faster than replenishment).
  4. Try to activate the test machine; It will fail due to put requests cached insufficient unique. It is expected, because we just started to initialize the KMS server.
  5. Run "slmgr.vbs /rearm"; Reboot as requested.
  6. Log in the test system. Check the observer of events for IDs 12288 and 12289; If you see no activation attempts, try manually activate using "slmgr.vbs /ato.
  7. On the KMS server, check the status of the unique client cache using "slmgr.vbs-dli". the account must be 1 or 2, depending on whether the pre rearm CMID was captured as a unique ID.
  8. Repeat steps 5 & 6, controls the number of KMS servers after each reboot. If you use up your reset, return the virtual machine and repeat.
  9. Note the CMID recorded on the KMS server to make sure that a unique ID was generated with each rearm.

  In repeated testing, I got no chance to get the number correctly increase based on the ease of use of /rearm, although I can clearly see the unique CMIDs being connected on the KMS. What's up with that? What else must be "uniqueified" to get KMS to recognize the new customer?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Orders of TMS provisioning models w/Custom

  I know that if you want to use custom commands to a model of TMS implementation you need to have in XML format.

  How can I put in the command "systemtools rootsettings" in XML format?  Otherwise said, we have 20 + systems and I'm trying to keep me from SSH in every single system, if I have to I will, but if I could put that in our model that normally push us when we get new systems, it will save a lot of time and help us greatly.

  SystemTools rootsettings

  use: rootsettings [on/series/off/never/get]

  Command to control the availability of the root user:

  Get the current value

  off root user is not available

  never superuser disabled permanently

  series [password] root user is available on the serial port only

  root user [password] is available on all ports.

  Thank you! Patrick

  Hi Patrik,

  It is not possible. 'systemtools' is not an accessible command through the API as xcommand or xconfiguration.

  You can always write a script, but that is not so easy if you've never done before. part the more difficult it will be to insert the password automatically.

  Good luck!

• Data Modeler does not connect to SQL Server database

  I click connect on New / select connection to the base and nothing happens.  No connection is added to the list of connection in the Import Wizard dialog box (file-> import-> Oracle Designer model) so I can't go forward with the wizard and I can't connect to my SQL Server DB.

  The connection works very well according to the test and to connect buttons on the New / select connection to the base dialogue.  Initially, there was errors, reported originally by Test and Connect, but those that have been resolved with minor changes to the URL JDBC and CLASSPATH for jtds.

  Is there a Data Modeler error log which could give an overview of what's going on?  Everyone knows this?

  SQL Server 2008

  JTDS 1.3.1 and 1.2.8

  Data Modeler 4.0.0.825

  Thank you.

  Hello

  No connection is added to the list of connection in the dialog box Import Wizard (file-> import-> Oracle Designer model)

  This path is for the import of the Oracle Designer repository that resides on the Oracle database as well as the Oracle connections are listed here.

  You must use "file > import > data dictionary.

  Philippe

• Can my customer use Dreamweaver cs5 to edit a site Dreamweaver CC?

  I think currently to a subscription of the CC to Dreamweaver so that I can redesign a site, but the customer maintains and updates their content and will not be upgraded. Can they change their website using Dreamweaver CS5 once I have start to edit files in Dreamweaver CC?

  Mike,

  Dreamweaver is a glorified text editor and as such can be used to edit HTML, CSS, JS, PHP, XML and a bunch of other documents. The reason why I say this is because, regardless of the structure of a Web site, any version of Dreamweaver allows to change it. Where the difference is where it allows you to use the deprecated code or where it guides you to use contemporary code.

  In short, Yes, your customer can continue to use CS5

• Models html custom in ADF

  We have departmental intranet ADF-centric application. Now, we need to publish a user part of the application on the Internet. We have a model, so I need to use my own models instead of those of adf. Not only the page templates, but how to make the elements (tables, buttons, etc.).
  ADF is suited for this purpose? I can't find any article.
  
  Should I use another technology, such as spring or window?

  Hello

  actually the question is incorrectly referred as it should be: is JavaServer Faces let me mix and match custom HTML with tags component JSF. Here, the answer is that it depends on. If you use JSF 2 (JDeveloper 11 g R2) then the answer is Yes if you build your pages using Facelets. If you are using JSF 1.2 then the answer is better to be 'No' to HTML and JSf are not fittingwell. For provisions which are oriented table, you can use Trinity HTML components trh:tableLayout, trh:cellFormat, and trh:rowLayout

  Frank

• Models of custom Module

  I can't get my custom module model to work, here's the tag that is implemented to pull in an article by chance from a defined category, then I add the url as a model he said to do, but nothing works, it uses just the default template, any ideas?

  {module_announcement,cr,62999,,,template="/NewsTemplate/NewsTemplate.tpl} »

  OK after digging for the last two days I've finally found what I had, this must be more available to partners, the man digging is not necessary for us, thank you all for at least trying to help with this. This is the page where you can find info on the parameters of the tag: http://helpx.adobe.com/business-catalyst/kb/modules-quick-reference.html#News

• Where are the presets customized for SOUL CS5?

  I had to build a new computer, but I had a backup of my body cs5 and other files. Anyone know where I can find the custom presets stored in the SOUL?

  C:\Users\username\AppData\Roaming\Adobe\Common\AME\5.x\Presets

• [CS5 Server/JSX] allGraphics geometricBounds parents does not not on InDesign Server

  Hello

  The following script works fine on InDesign CS5 Desktop:

  g = app.activeDocument.allGraphics;
       
  for (i=0; i<g.length; i++)
  {
  g[i].parent.geometricBounds = [0,0,"150mm","150mm"];
  g[i].fit(FitOptions.PROPORTIONALLY);
  g[i].parent.fit (FitOptions.FRAME_TO_CONTENT);       
  }
  

  When I run the script for InDesign Sever I get the following error:

  Error Number 30614
  Invalid object for this request,
  
  g[i].parent.geometricBounds = [0,0,"150mm","150mm"];
  

  Why .parent does not work on the server?

  g = myDocument.allGraphics;
  
  for (i=0; i
  The solution!
  Recompose() to insert automatically the pages