ID of Touch not recognized

Similar Questions

• pass code for id touch not recognized

  New iPad Pro, spent by the program installation, entered code pass for Touch ID or I pass wrong initially to key in the code or pass unrecognized code. disabled iPad. What is the next step to activate? Grateful for the help. Cheers, Chris

  Follow the instructions on this page: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

• The dial of the watch is not recognized when I touch it or by scanning

  Sometimes the dial of the watch is not recognized when I touch it or by scanning. This could be the cause?

  Hello

  It can help to restart your iPhone and your watch. Turn both devices off first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

• Error when you try to view videos of the Kodak Easyshare touch camera: the selected file has an extension (.) (THM) which is not recognized by Windows Media player.

  Camera video will not play on the computer

  I recently bought a Kodak EasyShare touch camera.  Love it, but for some reason some will not play videos from the camera to my computer.  He will say: the selected file has an extension (.) (THM) it is not recognized by Windows Media player.  Any suggestions?

  . THM is a thumbnail of the file... not a video file. I suspect that your
  Kodak records in the. MOV or possibly. Film MP4 format.

• Peripheral PnP USB - muted, is unplug sound when not touched, "device not recognized" or a malfunction, etc...

  Here is an exhaustive list I hope what happens (it's the Microsoft forums, so I think you guys are going to read a lot of information):

  • The sound on my PnP USB audio device cancels randomly without any reason. It is not to be touched at all, and often happens when I'm even not listen to all the sounds.
  • Before he died, it emits a blur in the helmet noise as it is to be disconnected or the cord is cut or something. I have to unplug it and plug it back several times to make it work.
  • It has been for several months, working properly, this month started anything, for about a week.
  • I can't use my headset because it is loose. I had the USB key to solve this problem, because it's too expensive get taking fixed. I did not buy the device at first hand, I got it from a family member who took my laptop in for repair and the guy he recommended and we sold two of these jacks.
  • When it goes off during a game, I can't sound to return. Sometimes I can fix it on a game (as Portal 2, for example) by going to options and change the type of sound (or any) what's called it headphones to speakers, then back to the helmet. However, the game freezes often when the sound goes off and I have to remove the usb key, and in this case the game should also be repeated. In addition, everything has sound options like that.
  • This happens randomly, but it tends to happen every five minutes or every few seconds, and coincidentally it almost always happens during a loading on a video game screen.
  • It is not always give me a warning sound, especially on the games. He's just quiet.
  • Device Manager does not display a point of exclamation or question marks next to any audio device and the key USB pnp is indicated correctly. In the options of the sound in the Control Panel, there is of the sound bars next to the USB key that indicates that his is read, but it is not in playback mode. The USB pnp is listed as default device, so don't tell me to do. The microphones are turned off as well.
  • It does the same thing in all my usb ports.
  • The driver is up-to-date and meant for Windows 7.
  • I do not install the Windows updates. Updates are bad.
  • Box for what he calls a "USB stereo Audio Adapter external" StarTech.com, or "ICUSBAUDIO". It came with a disc that I used to install the driver, and I went on their website to get one for Windows 7 specifically and installed.
  • I use a computer laptop 64 bit Windows 7. In Device Manager, there are three things listed under sound: Realtek High Definition Audio Intel (r) display Audio and USB PnP Sound Device. None of the USB devices have exclamation points.
  • For the first time today, when the usb unplug sound, my computer tells me "Device not recognized" and said it could have malfunctioned. When I clicked on it for more information, he said that he could not tell me what the usb was even because it was not plugged in, which was not true. I also had a window appears which has tried to install the device driver (already installed) and then was told that the unit had been disconnected before he could do (not true). It just happened, for the second time today a few seconds ago.

  Hello

  Check out the link and run the Fixit and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Install the Windows updates as some updates can fix a problem.

  As you mention that the computer is second hand troubleshooting accurately would be difficult. I suggest you contact the manufacturer. Check out the link.

  http://www.StarTech.com/support

• iPod Touch is not recognized by iTunes

  I did everything in the support pages, but he has yet to recognize my iPod. I tried different cables, ports, computers (it is taken over by other computers with the same iTunes), I uninstalled iTunes several times. I get a prompt my iPod on my laptop is looking to access the photos and videos of my iPod. I always agree (or allow the option says) I'm starting to think that it maybe that my computer can access only the pictures and videos on my iPod and that maybe why iTunes is not pick it up. I have movies on my iPod to my iTunes in sync but I'm really grasp what either. I used the same computer connection, iTunes and iPod for about a year and all of a sudden it happens. I have no idea why this is happening.

  I also posted this topic, subject badly too, help with pointing me in the direction that will be helpful too.

  Help, please

  Try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  Or try the iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  TT2

• IPod touch 4g not recognized by the computer.

  I have an ipod 4g and it is not recognized by my computer or itunes.  I called apple and used their forums and discovered that when I download itunes apple mobile driver usb is not installed.  Apple told me that it was a windows problem.  so I went to my brothers pc which has windows 7 like mine, downloaded itunes and my ipod could not always be recognized.  the mobile USB driver apple has not been installed on his computer no more.  I went to a friends house and he hooked up to his laptop which has windows 7 and it DOES not recognize my ipod.  After that, I knew for sure it was a windows problem.  can someone help me please?

  PS: when I download itunes, quicktime is not installed for some reason any.  Also my anti-virus could be a problem when I download itunes?

  Hi Karim,

  -Were there any changes made to the computer before the show?

  I suggest you go to the following Help article and check if it helps.

  
  

  iOS: device not recognized in iTunes for Windows

  http://support.Apple.com/kb/TS1538

  Note: The third-party products or services mentioned here are manufactured or provided by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  You can also go through the following link and check if it helps.

  
  

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/HT1926

  It will be useful.

• New Ipod nano is not recognized on laptop

  Bought a new Ipod Nano (my old one fell; broken screen).  I have the latest version of ITunes on my laptop HP Envy.  My sync iPhone without any problem. my old ipod nano also syncs.  A did the device synchronization Tests. Results: No Ipod Touch, IPhone or Ipad found.  I can also scroll to the clock and the parameters of the IPod Nano. I need help from the community before I call Apple.  Thank you

  Hello pamelafromsonora,

  Thank you for using communities of Apple Support.

  According to your post, I see that your new iPod nano is not recognized by iTunes on your Windows PC, and you cannot scroll through the settings of the clock on your iPod. I know how it is important to ensure that you can connect your iPod to your computer/iTunes and use all the features. I'll be more than happy to help you with this.

  Use the article If iTunes does not your iPad, iPhone or iPod and follow these steps to see if iTunes recognizes the device, specifically these sections:

  When iTunes on your computer doesn't recognize not the connected device, follow these steps. Try again after each step:

  1. Make sure that you have the latest version of iTunes that works with your computer.
  2. Check that you have the latest version of the software on your Mac or your Windows PC.
  3. Make sure that your device is turned on.
  4. If you see a trust this computer alert, unlock your device and press trust. If you still see the alert, you may need to reset your lockdown folder.
  5. Unplug all accessories USB from your computer except for your device. Try every USB port to see if it works. Then try another USB Apple cable.
  6. Restart your computer and your iPhone, iPad or iPod.
  7. To see if your device needs service, try another computer. If you have the same problem again, contact The Apple support.

  If you are using a Windows PC

  1. Open Device Manager by following the steps for the version of Windows that you have:
     • Windows 10: Click the search box in the lower left corner, type Device Manager and press ENTER. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 8: loose in the right edge of the screen. Press search and enter the Manager devices, and then click Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 7: click on > Control Panel > system and Maintenance > Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
  2. Even if you do not find the Apple driver, follow the steps below, based on what you see or don't see.

  The pilot and
  No symbols

  A down arrow
  by the driver

  Exclamation or
  question mark by
  the pilot

  No Apple Mobile
  USB device driver

  You don't see symbols next to the Apple Mobile Device USB Driver

  If you do not see , , or of the Apple Mobile Device USB Driver, look for third-party software conflicts. Then if you still need help, restart your Apple Mobile Device Service or contact Apple technical support.

  

  You see an arrow down

  If you see next to the Apple Mobile Device USB Driver, the driver with the right mouse button and choose enable from the context menu. Then if you still need help, contact contact Apple technical support.

  

  You see an exclamation point or question mark

  If you see or the Apple Mobile Device USB Driver, right click on the entry, then manually update the Apple Mobile Device USB driver.

  

  You do not see the Apple Mobile Device USB Driver

  1. Disconnect your device from your computer.
  2. Save a screenshot by pressing the Home button and sleep/wake button of the device button at the same time. The screen should Flash briefly.
  3. Reconnect your device to your computer.
  4. If you see one of these sections in the Device Manager, expand them:
     • Imaging devices
     • Other devices
     • Portable devices
     • USB Bus controllers

  Now, locate the entry that recognizes the device as a camera. You should see 'Apple IPhone', 'Apple iPad' or 'Apple iPod '. Right-click the device entry, and then manually update the Apple Mobile Device USB driver.

  If a single unknown device appears, follow these steps:

  1. Right click on the unknown device entry.
  2. Choose Properties from the context menu, and then click the Details tab.
  3. In the drop-down menu, select hardware IDS.
  4. If the ID begins with something other than USB\VID_0000 & PID_0000, go into the Device Manager and right click on the entry for device unknown, and then manually update the Apple Mobile Device USB driver.
  5. If the ID begins with USB\VID_0000 & PID_0000, then follow the remaining steps.
  6. Unplug the unit and remove all the USB devices on the computer.
  7. Shut down the computer, and then turn it back on.
  8. Reconnect the device, tests of each USB port for about 30 seconds to see if the device is recognized.
  9. Test with a different, checked 30-pins-USB or the lightning-connector-cable-USB, if they are available.

  If you still need help, contact Apple technical support.

  

  Manually update the Apple Mobile Device USB driver

  If one of the sections above directs you to this section, you should already have right click on an entry in the Device Manager. Now, follow these steps:

  1. Choose update driver software.
  2. Choose "Browse my computer for driver software."
  3. Choose "Let Me pick from a list of drivers for devices on my computer.
     
  4. Click the disk button. If this is not available, choose a category of devices such as Mobile phone or storage device, if in the list.
  5. Click Next. You should see the disk button.
  6. Click Browse and navigate to C:\Program Files\Common Apple Mobile Device Support\Drivers.
  7. Double-click the file "usbaapl. If you have a 64-bit version of Windows, this file will be called "usbaapl64". If you do not see here "usbaapl64" is not a Drivers folder, look in C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers.
  8. In the disc window, click Open, and then click Next and then click Finish.
  9. Windows installs the driver. If a message indicates that the software that you install "not passed the Windows Logo test", click on continue. You can get help with other common errors and the error code numbers in this Microsoft article.
  10. Open iTunes to make sure that iTunes recognizes your device. If not, Restart the Apple Mobile Device Service.

  Best regards.

• HP 15-r248nf: hdmi port not recognized on HP laptop after windows 10 update

  Need help! My laptop HP HDMI port does not work, apparently, that the HDMI is not recognized after the last windows 10 updated.

  Hi Lyn11,

  Thank you very much for your quick response. Yes, there are ways to find the product # and the n ° of the device.

  • On the desktop, (first screen of windows with all programs closed) Please press this key combination to bring up the system information which will also give the product # of the unit. Please, note it and n ° of the series unit. Don't post not your n ° of set of information on HP forums. Press the fn key (function key) and press "ESC" on the keyboard at the same time to bring up this information.
  • You may also locate in the bios. Please turn the unit off.  Wait a few seconds and as soon as you put it towards the up keep pressing the "Esc" key immediately, gently several times.
  • It will bring up the start menu. Then press the F10 key to go into the bios. The bios will also give the serial number information and product.
  • A third way to locate the product # would be to power down the device. Unplug the charger and remove the battery.  Then use a flashlight to look inside the compartment to locate the product #.

  Please visit these links which may provide more useful information.

  Link1: http://h30434.www3.hp.com/t5/Notebook-Audio/AMD-HDMI-port-on-dv7-laptop-is-lost-after-Win10-free-trial/m-p/5813013#M78967

  Link2: http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Boot-Device-Not-Found-Error-When-using-HDMI-cable-only/m-p/5803624#M139030

  I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well. Please keep me in the loop.

  Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• Satellite Click Mini L9W - keyboard not recognized B

  Hello

  I have a problem with my Tablet PC Satellite click Mini L9W - B. The keyboard is not recognized on this subject.

  I tried to clean the connector, restart the Tablet several times, tried to load with or whitout the keyboard, but nothing works!
  I do not think that the problem is with the battery, as I've seen on other topics as the tablet doesn't detect even the keyboard when I plug. The Tablet does not detect the keyboard battery.

  So, if you can give me advice or assistance to solve my problem, I would appreciate :-)

  He has no communication with the keyboard at all? (No battery detected, the touch pad and the keyboard does not?) There must be a link related question, I guess. If it was a driver related issue, then the battery would at least get detected)

  If you want to void your warranty, you can open the Tablet and keyboard dock and check that the Ribbon connectors or / and remove and replace the Ribbon connectors connectors in

• EliteOne 800 G2: EliteOne 800 G2 NIC driver not recognized with Windows Deployment Service WDS

  Hello

  I have just taken receipt of 5 new HP EliteOne 800 G2 23 "no touch machines. All PC's are generally imaged using Windows Deployment Services.

  I downloaded sp72515.exe that is the Intel I219 NIC driver pack for Windows 7 64 bit and injected these drivers into Windows Deployment Service and updated the boot LiteTouchPE_x64.wim file. Windows reported it went slowly and the 6 drivers concerned are all showing loaded with so much success in WDS.

  

  

  Problem. When I PXE boot the Windows EliteOne 800 G2 pilot of the CARD is not recognized by the 800 EliteOne G2.

  Wizard error

  A connection to the deployment share (\ < servername > \Deploymentshare$) could not be made. The following network device did not have a driver installed. PCI\VEN_8086 & DEV_15B7 & SUBSYS_8058103C & REV_31

  Hello:

  The only suggestion I can offer would be to try the driver directly from Intel...

  The 2nd file listed on the left side of the page is for W7 x 64.

  https://Downloadcenter.Intel.com/download/18713/network-adapter-driver-for-Windows-7-?v=t

• NB200 - Webcam not recognized

  Hi, hope someone can help with this!

  Webcam is not working. Under Windows XP. Does not appear in the devices in Control Panel > system > device

  For a while, I kept getting the error message "USB device not recognized" when I start the computer, and then whenever I adjusted the screen, so those who were probably related. ?:|

  Updated the driver and USB issue went, but when I try to open the Camera Assistant Software, it says "Webcam is either disabled or failed.» Please check your webcam settings. »

  (X-)

  Thoughts?

  Hello

  I recommend first load default settings in the BIOS. Save these settings, exit the BIOS and restart your laptop.

  Then, make sure that the latest driver for the Toshiba webcam is installed. You can download it on the Toshiba site.
  In addition, it would be advisable to install the latest version of the BIOS. Visit the Toshiba page!

  In the worst case if you have the same problem after reinstalling the Toshiba Recovery disk it associated material s. This means that you should contact an authorized service provider. Guys can check the mobile and exchange equipment (webcam, cable or something else). Just get in touch with the guys and ask for help. From my own experience, I can say that they always try to help you as best we can.

  Good luck! :)

• iPod iPhone not recognized byiTunes AMD

  I'm picking up a PC of 1 year of my son. There no iTunes installed before installed and I checked all programs like Apple, support for mobile devices etc. work. When I connect my iPod Touch or iPhone that they are not recognized by iTunes. I ran through all the help topics, but all seems fine, except devices do not display upwards. I ran diagnostics under help and he says "not found, no USB port" as well as iPod etc. The iPod and iPhone fortunately appear in the 'My Computer' menu to Windows is to see very well. How iTunes to see them? I use Windows 10 and bang iTunes to update software

  Try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Universal Serial Bus Controllers > Apple Mobile Device USB Driver
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  Or try the iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  If not try a complete tear down and rebuild in accordance with the resolution of the problems with iTunes for Windows updates.

  TT2

• IPod nano not recognized by iTunes - 10 Windows

  My new iPod Nano (7th generation) is not recognized by iTunes (version 12.3.2).  Windows 10 is pleased to recognize the Nano as a USB and I can copy files to the Nano using Windows Explorer.

  When I open iTunes and connect the Nano screen Nano said that it is connected, windows 10 tells me that it is connected, but iTunes displays the message "an iPod has been detected, but it could not be identified properly.  Please disconnect and reconnect the IPod and try again. "

  Tonight, I uninstalled iTunes, followed the instructions on the Apple support site to stop and restart the "Apple Mobile Device Service".  I also uninstalled the windows drivers, the computer uses and then reinstall the drivers, but the only ones that appear are the original windows ones.

  In Device Manager, the iPod is listed in 3 places:

  Hard drives - Apple iPod USB Device

  Mobile devices - IPOD

  Apple Mobile Device USB Driver - universal series Bus controllers

  Serial - USB Mass Storage Device Bus controllers

  When I click on Player update "mobile devices - iPod" it tells me that "the driver software is up-to-date Volume filesystem driver. WPD

  All you other ideas how to solve this problem?

  Thank you

  Have you tried:

  iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  It's the iPod touch forum. I asked that your post be moved to the iPod Nano forum

• iPod nano not recognized by windows xp

  Nano 16 gb

  taken but not recognized by the computer or itunes

  Hi Steve_Mills,

  Check out the links below and try the steps mentioned them, check to see if it helps.

  iPod not recognized in 'My computer' and in iTunes for Windows

  http://support.Apple.com/kb/ts1369

  iPhone, iPad or iPod touch: device not recognized in iTunes for Windows

  http://support.Apple.com/kb/ts1538