Model of Flash and Authorware Quiz

Similar Questions

• Flash in Authorware

  Hello
  Is there anyway that I can truncate a flash movie in authorware?
  
  Thank you
  Rashmi

  > Yes I want to short by cutting some frames from the beginning as
  > and the end of the film.
  > unfortunately I do not have the SWF or fla file :-(

  See the help files for Flash Xtra. You should be able to unit one way
  play of FrameX FrameY.

  Open a Flash sprite on your conduct of flow. Click the view button on the
  Properties Panel click the help button that appears on the new dialogue
  box. Watch the presentation of orders.

  Steve

  --
  EuroTAAC eLearning 2007
  http://www.eurotaac.com

  Adobe Community Expert: Devices, Mobile Flash and Authorware
  My blog - http://stevehoward.blogspot.com/
  Authorware tips - http://www.tomorrows-key.com

• LaskerJet HP 1022: Having problems printing. Seeing flashes and does not turn off.

  I have problems printing.  I turned the printer on / off power several times to cancel the print job.  There is a red light flashing and I am unable to stop after pressing several buttons.  I apologize because I don't have a book.

  Here is your complete support page.

  http://support.HP.com/us-en/product/HP-LaserJet-1000-Printer-series/439424/model/439431/manuals

  Download your User Guide and read.  Here he also troubleshooting for you.  Good luck.

• Satellite A30 - electric light flashes and the battery does not charge

  Hi guys,.

  I have the model above and recently, when I plug in my power cord to the back of the laptop instead of the usual constant green light loading, the indicator flashes and the light orange low battery always flashes as well.

  I have checked the plug, unplugged the power cord from the laptop and plugged back again but does not help. A few times it started loading so everything went well and now he again refuses to load.

  Any suggestions how I can solve this will be highly appreciated.

  Thank you.

  Dante

  Looks like a hardware problem

  Usually if the power light blinks then it does not sound good because the LED provides an error code which can be read by a technician for laptop

  But before you will contact the technician for laptop for help, try to do it:
  Remove the battery and unplug the AC adapter from the portable computer
  Wait about 20-30 minutes and then reconnect the two parts.

  Then try to turn on the laptop

  If it doesn t help that it s time for the call of the ASP

• I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button.

  I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button. Tried unplugging and tried unplugging the modem. I would like to fix.

  Modem... doing and... model number you have?

  What operating system do you use on your Mac, or you are using an iPhone or iPad set things up... or a PC?

• Laptop screen starts flashing and white lines appear

  While working on my laptop of her debut screen flashing and white lines begin to appear in this topic. And sometimes she closes down.my laptop is Acer company. R3 - 471 series.

  Hello

  Sounds like corrupted graphics drivers, or graphic material.

  Update your graphics drivers for your model laptop and the operating system directly from the Acer site.

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

  See you soon.

• Windows 7 freezes after burning a compact flash and priming.

  Title of the Moose: the Compact Flash detection once started on any system using a specific application on Windows 7

  Hi, I burned a compact flash tool & after burning, I used this compact flash for the start-up of a machine that uses only this compact flash. Once the machine is started, I am again connected this compact flash using card reader for windows 7 but now windows 7 is getting hanged and I am not able to see the drive in the compauter.

  Hello Gyan Singh, b.

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description provided, it looks like you are having problems with Windows 7 suspension after burning a compact flash and priming.

  I need to ask you some questions to help you better.

  1. What tools did you use to burn the compact flash?
  2. What is the brand and model of the card reader?

  Reply with answers to help you best.

• Flash and Wacom Pentablet painting bug?

  Hey all the...

  Looking for solution this problem with my Adobe Flash and Wacom PenTablet problem? https://www.YouTube.com/watch?v=cDytny1lpUQ & feature = youtu.be

  Looks like it's half offset screen with painting...

  
  

  Hello

  Could you please provide more details on parameters like

  Shelf model

  Setting specific tablet like (windows ink etc.)

  The Tablet driver version

  OS version

  Hardware configuration.

  Tool setting in Flash Pro

  Version number of Flash Pro

  And if it is not a problem, because you could you please uninstall the driver for Tablet and Flash (cleaning use CC tool) and re - install the latest version of the drivers drivers Legacy | Wacom and also Flash Creative Pro compared to the clouds. Restart the system and check if the problem occurs?

  You can also see the following threads if they can help you in any way:

  --> The TOOL BRUSH is centered and screwed upward with wacom tablet on my update of Flash 2014

  --> Drawing is done with Tablet wacom (update of Flash 2014)

  Thank you

  Sangeeta

• Models of Flash with the text?

  Hello. I'm working on a video that includes a picture, a song, snow (I'm using model snow of the Flash) and a scrolling text. My problem is that I can get everything to work property until the final step, which adds the text. When I add the text continues to snow. I have no idea why its happens or what im doing wrong. In addition, is while im here, there a way to slow down the text? The scrolling text zip up to the stage and I can't understand how slow it down.

  I use Adobe Flash CS5 on Mac 10.8.2. Yes, I checked the updates last night and I have all the updates.

  Thank you in advance!

  again, use:

  var alreadyExecuted:Boolean;

  {if(!alreadyExecuted)}

  alreadyExecuted = true;

  Number of symbols to add.
  const NUM_SYMBOLS:uint = 75;
  var symbolsArray:Array = [];
  var idx:uint;
  var Snowflake: snow;

  for (idx = 0; idx< num_symbols;="" idx++)="">
  Flake = new Snow();
  addChild (flake);
  symbolsArray.push (flake);
  Call randomInterval() after 0 to a given ms.
  setTimeout (randomInterval, int (Math.random () * 10000), snowflake);
  }
  function randomInterval(target:Snow):void {}
     
  The x value of the current instance of the snow and the property is
  Target.x = Math.Random () * 550 - 50;
  Target.y = - Math.random () * 200;
     
  randomly scale x and y
  var ranScale:Number = Math.Random () * 3;
  target.scaleX = ranScale;
  target.scaleY = ranScale;
     
  var tween: String;
  ranScale is between 0.0 and 1.0
  If (ranScale< 1)="">
  Tween = "slow."
         
  ranScale is between 1.0 and 2.0
  } Else if (ranScale< 2)="">
  Tween = "medium";
         
  ranScale is between 2.0 and 3.0
  } else {}
  Tween = "fast";
         
  }
  assign tween nested in myClip
  myClip [tween] .addTarget (target);
     
  }

  }

• How to read data in Adobe Flash and align it to look like it's column?

  I am doing an application that already exists, but I add a few improvements. I'll explain what this app is. There is a server and client side. The client side adds data to the Access database (the columns are time, name and surname). On the other computer is an application that displays this data (I don't know if he reads a database or another type of file, but I did a database). I know that server-side plays an .swf Flash file. This screen stays for about 30 seconds and then the application plays videos in the video player installed (ads, this model is connected to a TV) for some time and then the screen goes back to the display of the data.

  I'm 18 and I have very limited knowledge of Adobe Flash (I learned something at school). I've done completely client-side app. I now how to create server-side. My main problems are: how to connect to Adobe Flash to the database (is it possible to transfer this data to any other file that can be connected to the Flash?), how to read data from database for Flash and how to display it. I don't want to display the data in the grid. In the application that already exists, each word is like a new text (tool in Flash) and it is aligned. Is it possible to add a loop that creates new texts and plays database cell? How to refresh the Flash screen?

  I know it's a very complex issue, but your help would be very appreciated. I did on the client side in Delphi. If you need more information or if you do not understand something of my explanation, don't bother to ask. Thank you!

  You can transfer data back and forth between Flash and database on a server with PHP as the intermediary.  If you are looking for Gioogle use terms like 'AS # PHP MySQL tutorial' (fillin 2 or 3 for the ' # '), you should be able to find something to help you along there.

  What about adding new textfields and harmonizing, it depends on what version of as you use.  In AS3, you use just...

  var tField = new TextField();

  tField.x = a value to match.

  addChild (tField)

  As far as refreshing goes, this would require removing all Textfields you added and re-create new ones like you did the first time.  Yet once, it depends AS version that you use.  In AS3, you can use removeChild()

• Help code AS3 for drag and drop quiz

  I have a flash drag and drop quiz I want to add different images to match the correct veribage when users have dropped the case.

  I have text works well when the user deletes the folder (i.e. "Yes, that's correct! ', I'm sorry, is not correct.', 'congratulations, you're done!'")

  I don't know where to start and I was wondering if it was possible to add an image from the library onto the stage when the corresponding text appears on the stage?

  I have AS3 below code I use.

  Thanks for the help in advance!

  

  ////////////////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////////

  var startX:Number;

  var startY: number;

  var counter: Number = 0;

  folder_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  folder_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  folder2_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  folder2_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  folder3_mc.addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  folder3_mc.addEventListener (MouseEvent.MOUSE_UP, dropIt);

  function pickUp(event:MouseEvent):void {}

  event.target.startDrag (true);

  reply_txt.text = "";

  reply_txt2.text = "";

  event.target.parent.addChild (event.target);

  startX = event.target.x;

  startY = event.target.y;

  }

  function dropIt(event:MouseEvent):void {}

  event.target.stopDrag ();

  var myTargetName:String = "target" + event.target.name;

  var myTarget:DisplayObject = getChildByName (myTargetName);

  if (event.target.dropTarget! = null & & event.target.dropTarget.parent == myTarget) {}

  reply_txt.text = "Yes, that's correct!"

  reply_txt2.text = "Donec sed fermentum lorem. Suspendisse potentialit. Pellentesque hendrerit nunc vitae risus vel gravida Nam semper tempor had lorem sed nulla lacinia vel ante vitae commodo. CRAs ac dolor nibh. « ;

  event.target.removeEventListener (MouseEvent.MOUSE_DOWN, Pick-up);

  event.target.removeEventListener (MouseEvent.MOUSE_UP, dropIt);

  event.target.buttonMode = false;

  event.target.x = myTarget.x;

  event.target.y = myTarget.y;

                          counter ++;

              } else {}

  reply_txt.text = "I'm sorry, this is not correct.";  

  reply_txt2.text = "Lorem ipsum dolor sit amet, adipiscing elit computer. Surpassing massa tellus, ut euismod urna. Phasellus bibendum pretium porta. Praesent sed elit vel odio dignissim in tortor ultrices. »

  reply_txt3.text = "Try Again";

  event.target.x = startX;

  event.target.y = startY;

              }

  if(counter == 3)

                 ){

  reply_txt.text = ' congratulations, you're done! "

  reply_txt2.text = "";

      }

  }

  folder_mc.buttonMode = true;

  folder2_mc.buttonMode = true;

  folder3_mc.buttonMode = true;

  Yes, to add a library on the stage using actionscript object to assign the object a class, tell ImageClass.  You can then use the new constructor to create an instance, and then add it to the display list:

  var image: ImageClass = new ImageClass();

  addChild (image);

• my power green LED flashes and the laptop does not start

  Mr President, I have laptop computer Sony vaio, when I press the power button, my power LED green light begins to blink, sometimes sometimes brighter Sun, but nothing else happened, my fan remains closed, screen remains black, just POWER green LED flashing, flashing in the same way as orange light flashes in case of in standby mode, it is usually solid green , but now it flashes and the laptop does not start, what should I do Sir...

  My model number is the model of Sony VAIO PCG-61911W... His VPCEG18FG of the product name

  ankurgupta53,

  It seems that your device is not post.  You can try reinstalling the ram or simply by using a single module at a time, but other that that the device would need service...

• pass variables from flash to authorware

  Hello
  
  If I have a button in flash and want to send a string of varibales to authorware:
  -example code-
  Flash code.
  {We (Release)}
  fscommand ("variable", "var1, var2, var3, var4")
  }
  Authorware code.
  EvalAssign (EventLastMatched [#command] ^ ": = EventLastMatched [#args]")
  Trace (EventLastMatched [#args])
  ActionFuntion (EventLastMatched [#args])
  Quit()
  
  In the authorware file, I would like to highlight this string and breakit in authorware and apply it to the ActionFuntion.
  
  Help, please.
  
  Thanks daniel

  If you have a string "var1, var2, var3, var4" you want to get each
  element of?

  Repeat with i = 1 to LineCount (EventLastMatched [#args], ',')
  lines : = GetLine (EventLastMatched [#args], I, I, ',')
  end repeat

  Must establish each element of the sting in a separate list item in the
  linear list of lines. I really don't understand what you are tying to
  do, so I use a list here for demonstration purposes, but perhaps you
  you want to replace the second line with:

  ActionFunction (GetLine (EventLastMatched [#args], i, i, ','))

  Who will call ActionFunction each time that the loop works and send it to the
  next element in the chain. In your case, it will call...

  ActionFunction ("var1")
  ActionFunction ("var2")
  ActionFunction ("var3")
  ActionFunction ("var4")

  -What are you trying to achieve?

  Mark

  deerowbear wrote:
  > Sorry that I misunderstood. When I Trace (EventLastMatched [#args]) in authorware I have
  > get var1, var2, var3 var4. The function call an external dll, passing those
  > variables off the coast and an ActionFunction in a dll file.
  >
  > Thanks daniel
  >
  >
  >
  >

  --
  ------------------------------------------------------
  Multimedia synchronization command Authorware:

  www.authorwarextras.co.UK--> orders

  Synchronization of media with ease!

  EuroTAAC eLearning 2007
  www.eurotaac.com

  www.AuthorwareXtras.co.uk
  www.freelists.org/List/flashelearning
  

• Given that you have blocked Adobe Flash and I uninstalled as suggested by many commentators, what are my options to see the content I want to see?

  Yet once, now that Adobe's Flash problems are everywhere the news what are my options to display the content on the sites that were previously used by Adobe Flash? I uninstalled Adobe Flash, but need an alternative. Thank you!!!

  Mozilla had 'soft-blocked' version 18.0.0.203 and earlier, which still allowed you will activate Flash on websites of that trust.

  If you are not accustomed to using the "Request to activate" feature with any of your plugins, here's what to expect:

  When you visit a site that wants to use the Flash, you should see a notification in the address bar icon and one of the following: a link in a black rectangle in the page or an information bar slides between the toolbar and in the page area.

  If you see a good reason to use Flash, and the site looks trustworthy, you can go ahead and click on the Lego-like icon in the address bar to allow Flash.

  But some pages use Flash only for tracking or play ads, so if you do not see an immediate need for Flash, feel free to ignore the notification. It will just sit there in case you later want.

  Until this ordeal of previously unknown security flaws shakes, you might want to try this and see how it fits. To set the Flash "Ask to activate", after you have reinstalled it, open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Search 'Shockwave Flash' and always change 'enable' to 'ask to activate '.

• I have firefox I put in player17.0.0 flash and I can't see vidios on utube or play games on facebook or zynga. Why not? What should I do?

  When I was asked to update my flash player, so I did, I was playing farm town 2 on Zynga. When I did, I went to play my game and the image would not return. The site came, but the game would not load completely so that I can play the game. I'm went on You tube to play music videos and the videos would not play. I went to my WWE network to see if I could look at him and I could not watch anything there either. I can not even play my games book face. I loaded and unloaded flashplayer at least a dozen times or more, and I still can't get anywhere. I can also do not charge any old version of flash player. What should I do?

  First of all, unfortunately, pop-up message on the Flash updates while you visit Web sites can often install malware. If you notice any strange behavior then please complete your plan of regular safety with some freedom to scan/cleaning of the tools listed in our technical support article: Troubleshooting Firefox problems caused by malware.

  Secondly, your "more details of the system" does not show the 'Shockwave Flash' plugin, so it can be disabled. You can check on the page modules, either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Search for "Shockwave Flash", and if you find it, change permission to 'never activate' to 'ask to activate '.

  If the plugin is not there, you can check the following folder to see if you find this file on the system:

  File: C:\Windows\SysWOW64\Macromed\Flash
  File: NPSWF32_17_0_0_188.dll

  I also noticed something odd: you said Windows 7, but your Firefox means Windows XP. Could clear you any parameter of backward compatibility on your shortcut to Firefox. Here's how, either:

  • Right click of your Firefox shortcut on the desktop > properties
  • right click on your icon of Firefox taskbar pinned > Mozilla Firefox right-click > properties

  In this dialog box, open the Compatibility tab and make sure that nothing is settled here, so Firefox can take full advantage of Windows 7.