Model of Smartphones blackBerry with the button "hide"...

Similar Questions

• Problem of Smartphones blackBerry with the button mute

  So I was playing songs on my blackberry 9700 when I tried pause button works fine but anyway after some time stopped working for some strange reason.

  I also reboot the phone given that it could be a software error, but nothing helped.

  Kindly advise on how bad the problem or do I have to go into a blackberry shop for repair.

  Thanking in anticipation >

  If a battery pull did not tour (and I hope that your phone is powered when you removed the battery, otherwise it will do nothing to help you), reload your operating system is the next logical step.

  To do this, connect your phone to your PC via USB and open BlackBerry Desktop Software.  Once your phone has been recognized, click device at the top of the software, and then restore the menu drop down.  Choose the most recent restore point and the recharge.  That should do the trick.  If this isn't the case, you should return to your carrier for replacement.

  I hope that helps you.

• Disorder of Smartphones blackBerry with the new os7.1

  OK, I'm updating my 9860 with the new os7.1, but he seems not to come with all the features, can someone help me

  Two of the most popular news are Mobile Hotspot and the Radio Tuner.  It would appear that not all versions of OS 7.1 includes both, so I'll assume that the OP refers to one of them.  It is dependent on the version that you download.

  See you soon.

• Problem Bluetooth PRIV Smartphones blackBerry with the BMW 328 model 2013

  I tried several days get my PRIV to connect with my bluetooth and phone/book music and the only way to make it work is to disable the function of my phone. When I try to connect my BB PRIV to my car, there will be des-1001,-1002, etc., next to the bluetooth signal and after a few seconds he suddenly resets my car bluetooth system. There is no new update for my car system and I have never had a problem with other Android, BlackBerry, or even Apple devices. It's the first time that this problem occurs and it's phone contacts which are somehow overloading my car infotament system. However there is no way for me to specifically stop the phone contact because even though I do in the bluetooth on the phone settings, every time I get in my car it resets the permissions and tries to connect again AGAIN and AGAIN the cause of the problem. Please let me know if my phone is broken software wise, or if the application contact break you guys used somehow some systems of infotament of the telephone directories of car etc. Cause the phone book may never load and I tried several times to make it work.

  Hey, if I could get my phone with my car, including the audio both phone and bluetooth features. In order for me to get it to work I had to download the new firmware from

  http://www.BMW.com/com/en/owners/connected_drive_services/mobile_devices/bluetooth_software_update.h...

  I put the last seven digits of my vin number in the search and downloaded the update to a USB plugged on the center console of my car. Once it was done I tried to connect and to my surprise my contacts list appeared. I pulled the top of Spotify and it played without screaming and cutting. I tried a phone call, and it worked as well. I want to test a little on my lunch hour but well again.

  See if it works for you.

• Problems of Smartphones blackBerry with the receipt of emails

  I just got this phone for Christmas and set up two accounts of e-mail on my phone.  So far, I received my emails very well on my phone and they always charge just notified me, etc.  Yesterday, I received an e-mail in two inboxes (on my phone) basically saying thank you to set up your e-mail accounts... you will begin to receive messages in 20 minutes (the same e-mail I had when I first set up the e-mail on my phone accounts).  Since then, I've not been doing e-mail on my phone even if when I check my e-mail on my computer, there are new messages.  I tried to remove the two accounts and setting them up again, but this does not solve the problem.  Any reason why it does this and I have to do?

  Hi and welcome to the Forums!

  I suggest the following, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come):

  (1) registry HRT

  • Homescreen > Options > Advanced Options > host Routing Table > (it matter little what line is current) > sign up now

  (2) Service reference books

  • KB02830 Send the directories for the BlackBerry Internet Service

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If this isn't the case, then you should contact your carrier for the support and formal help.

  Good luck and let us know!

• Volume no. Smartphones blackBerry with the appellants

  Hi guys,.

  I looked at the manual, the demo online, read forums and still can't find the solution to any volume of anyone who calls me.  I went to the help, clicking the menu button options, and then he tells me to click on General options.  I have not listed.  I have advanced options, but nothing is there that I can find to fix this problem.  People call me can hear me when I answer, but I don't hear anything.  I tried to use the speaker and all the rest.  I know I've hit something but I don't know what.  Can someone help me please?

  Thank you

  Kim

  I think that the aid supposed to start in your phone/Call Log icon. From there, the menu and go to Options, then General Options. You can set the default call volume. Also during a call, if you press the "Volume up" button to increase the volume it does not increase?

• Question of Smartphones blackBerry with the address book

  I upgraded my version of software from 8320's to v4.5.0.81 recently. When I open my address book, there is a wide space between the contact list. This is eqivalent to double-spaced typing in Microsoft Word. I am able to see only 6 names to atime on the screen. Any suggestions to fix this? Thank you.

  There is unfortunately no way to disable the new look of the address book. This is the way that all the books addresses with OS 4.5 and higher. You would have to downgrade the OS less than 4.5 to go back to the old look.

• Problems of Smartphones blackBerry with the letter i

  When I type the letter I in my SMS there is no point at the top of the i and when I type in the search for contacts in the phone does not recognize it as a letter and custom seatch for her, when I send a txt containing the letter to someone I have it cross correctly the message is unreadable. Any ideas?

  What language is yo uusing on your BlackBerry... assuming that English?

  Can you make a screenshot?

  http://supportforums.BlackBerry.com/T5/Forum-feedback-and-ideas/how-to-post-a-screen-shot-of-your-BL...

  If you type a tiny 'j', a dot?

• Case of Smartphones blackBerry with the magnet on one side

  Hello world. Yesterday, I realized that one side of the case has magnet. Anyone know why? Perhaps, it has become loving putting and removing the phone inside. Thank you

  The licensee has magnets on both sides, when you put the phone in the holder the magnets he mode sleep to save the battery. You can still receive communications in sleep mode but the autonomy is increased

• Smartphones blackBerry with Blackberry ID problems

  I deleted my Blackberry ID by clicking on the link provided in the confirmation email that I received when I first created it. Now when I want to check my account or put in another SIM, he still asks me to connect, but I don't know my password longer (am now at 6 out of 10 attempts). At the same time, when I click on the option 'forgot password' it tells me to make sure that my BlackBerry ID enabled one I typed the right e-mail address? !!!

  How I can ged rid of it all? I don't need a Blackberry ID and want to just my phone as it was before I created this account in the first place. Help, please

  Yes, a wipe will delete all user data and perhaps all the 3rd party apps... see these for reference:

  • KB26694 How to change the ID BlackBerry PlayBook, BlackBerry tablet or a smartphone BlackBerry with BlackBerry 7
  • KB16307 Actions performed by the BlackBerry smartphone during the removal of the user stored and application data

  If you use your BB (I'm not on this point), you can make a backup of your data first with Desktop software and then restore after completing the BB ID wipe and other things..., it would be better to wait the restoration before know of things work well, just in case where:

  • http://us.BlackBerry.com/apps-software/desktop/?lid=us:BBsoftwareesktopSoftware & Cal = us: bbsoftware
  • KB23680 A backup of the smartphone BlackBerry using BlackBerry Desktop Software 6.0 to 7.0

  You should also probably do a selective restore rather than a wholesale restoration... just to be sure restore you only the data items that are important (e.g., contacts, calendar, etc.) and not on the databases that could be problematic if restored:

  • KB03974 List of database for the blackBerry smartphone

  In addition, it would be a good idea to use a desktop app Organizer for your data, rather than having your BB as the "main source". With a compatible organiser, you can synchronize between your PC and your BB all these data, which then allows you to forward to your full size PC monitor/keyboard/mouse to actually work with the data:

  • KB12268 BlackBerry Desktop Software for Windows supported for synchronization applications
  • KB03315 How to synchronize Organizer data (calendar, to-do list, memo list and list of contacts) using the BlackBerry Desktop Software
  • KB19148 How to synchronize Organizer data in Microsoft Office for Mac between the phone smart BlackBerry and your Mac using BlackBerry Desktop Software

  I know I'm throwing a lot to you, but, well... I want to make sure that you are getting the most out of your BB you can, as well as the protection of your data at the same time. Oh Yes... which reminds me... don't forget to activate the app BB Protect free once you have everything... He's going to save your data in the cloud as an extra measure of data protection. It will also help in the case of loss or theft.

  • KB25061 What is BlackBerry Protect?

  Good luck!

• Progress bar when audio plays on a slide with the button

  Hello

  I use 6 Captivate.

  I have a zipper opening for my demo that introduced the demo. This slide contains 1-3 minutes of audio. On this slide, I have a standard button named 'Start', that the learner must click Start the demo (which is on the next slide). I also have a PlayBar with rewind, Play/Pause, Back, Next buttons and Audio.

  Once the project starts, the Play/Pause button on the playback bar turns into mode 'Play '. This, I believe, is an expected behavior because of the presence of the 'button '. However, it causes me problems because, if the learner clicks on the 'Play' button (instead of the start or next buttons) after the end of the audio to the slide of the opening, the progress on the playback bar bar moves for the duration of the audio, so that nothing changes on the screen.

  Is it possible that I can:

  1. Move the progress bar with the button Play/Pause in "Pause" mode when opening, slide audio playback and switch to 'Play' mode once the audio ends? In this case,.

  a. If the learner pauses the audio by clicking Pause and then click on Play, it must continue with the audio.

  b. If the student click on the play button after the audio ends must take sound to the next slide.

  2. turn off the Play/Pause button so that the learner will not click on it?

  I don't want to hide the PlayBar on this slide as I want to give the Rewind option to the learner so play the audio again if he / she wants.

  Anthony

  A colleague found an easier solution than the one I was talking about earlier.

  He just moved the point to pause the start until the end of the slide button. Now, the progress on the playback bar bar moves with audio and the Play/Pause button passes in "Play" mode when audio stops at the end of the slide. On clicking the play button, the project will move to the next slide.

• Switch Cisco 2960/3560 = > recovery password and default settings with the button Mode

  Hi Experts,

  I have some confusion with the button Mode with cisco 2960/3560 switches.

  I read on many forums and articles, but where things are not clear.

  a place given 3 seconds and somewhere is given 7 or 10 seconds.

  Qus1), what is the exact time to press/hold Mode button to perform two following tasks:

  A. password recovery (according to my knowledge 3 sec) good or bad?

  Configuration of the switch (start + run) would be safe

  After the recovery of password? Yes or no

  B. factory default (according to my knowledge 10 dry) good or bad?

  I'm afraid, because if I press mode button more than 3 seconds, then

  It will delete any configuration of cisco switch. Yes or no

  Qus2) I want to recover the catalyst 2960/3560 switch password without

  Start/run configuration to lose. That is my main concern.

  Please tell me how to do this, what will be the time keeping Mode buttom

  in a few seconds?

  Qus3) which means this line

  "If the password recovery mechanism is disabled in switch

  then you will lose all the config.

  This sentence has been given on this forum url

  https://supportforums.Cisco.com/thread/140848

  KS

  Attach a terminal or PC with terminal emulation (for example, Hyper Terminal) port console switch.

  Use the following terminal settings:

  • Bits per second (baud): 9600

  • Data bits: 8

  • Parity: None

  • Stop bits: 1

  • Flow control: Xon/Xoff

  Note: For more information on the wiring and connection of a terminal to the console port, refer to connecting a Terminal to the Console Port of Catalyst switches.

  Unplug the power cable.

  The power switch and take it to the switch: command prompt:

  2900XL, 3500XL, 2940, 2950, 2960, 2970, 3550, 3560, and 3750 switches of the series, to do this:

  Press and hold the mode button located on the left side of the façade, while you reconnect the power cable from the switch.

  2960, 2970

  Release the Mode button when the SYSTEM LED flashes orange and then turns green. When you release the Mode button, the SYSTEM LED flashes green.

  3560, 3750

  Release the Mode button after about 15 seconds when the SYSTEM LED turns green. When you release the Mode button, the SYSTEM LED flashes green.

  The system was interrupted before the flash at the end file system initialization

  loading the operating system software:

  flash_init

  load_helper

  boot

  switch:

  Run the flash_init command.

  switch: flash_init Initializing Flash... flashfs[0]: 143 files, 4 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 3612672 flashfs[0]: Bytes used: 2729472 flashfs[0]: Bytes available: 883200 flashfs[0]: flashfs fsck took 86 seconds ....done Initializing Flash. Boot Sector Filesystem (bs:) installed, fsid: 3 Parameter Block Filesystem (pb:) installed, fsid: 4 switch: !--- This output is from a 2900XL switch. Output from !--- other switches will vary slightly.

  Run the load_helper command.

  switch: load_helper switch:

  Question the dir flash: command.

  Note: Be sure to type a colon ":" after the dir flash.

  Appears in the file system of the switch:

  switch: dir flash: Directory of flash:/ 2    -rwx  1803357                  c3500xl-c3h2s-mz.120-5.WC7.bin !--- This is the current version of software. 4    -rwx  1131                     config.text !--- This is the configuration file. 5    -rwx  109                      info 6    -rwx  389                      env_vars 7    drwx  640                      html 18   -rwx  109                      info.ver 403968 bytes available (3208704 bytes used) switch: !--- This output is from a 3500XL switch. Output from !--- other switches will vary slightly.

  Type rename flash: flash: config.old config.text to rename the configuration file.

  switch: rename flash:config.text flash:config.old switch: !--- The config.text file contains the password !--- definition.

  Issue the boot command to boot the system.

  switch: boot Loading "flash:c3500xl-c3h2s-mz.120-5.WC7.bin"...############################### ################################################################################ ###################################################################### File "flash:c3500xl-c3h2s-mz.120-5.WC7.bin" uncompressed and installed, entry po int: 0x3000 executing... !--- Output suppressed. !--- This output is from a 3500XL switch. Output from other switches !--- will vary slightly.

  Enter "n" at the prompt to abort the initial configuration dialog box.

  --- System Configuration Dialog --- At any point you may enter a question mark '?' for help. Use ctrl-c to abort configuration dialog at any prompt. Default settings are in square brackets '[]'. Continue with configuration dialog? [yes/no]: n !--- Type "n" for no. Press RETURN to get started. !--- Press Return or Enter. Switch> !--- The Switch> prompt is displayed.

  At the switch prompt, type en to enter a mode.

  Switch>en Switch#

  Password recovery

  Type rename flash: config.old flash: config.text to rename the configuration file with its original name.

  Switch#rename flash:config.old flash:config.text Destination filename [config.text] !--- Press Return or Enter. Switch#

  Copy the configuration file in the memory.

  Switch#copy flash:config.text system:running-config Destination filename [running-config]? !--- Press Return or Enter. 1131 bytes copied in 0.760 secs Sw1#

  The configuration file is now reloaded.

  Replace the current passwords that you do not know. Choose a password with at least one capital letter, one number and one special character.

  Note: Replace passwords that are required. You must crush not all passwords listed.

  Sw1# conf t !--- To overwrite existing secret password Sw1(config)#enable secret !--- To overwrite existing enable password Sw1(config)#enable password !--- To overwrite existing vty password Sw1(config)#line vty 0 15 Sw1(config-line)#password Sw1(config-line)#login !--- To overwrite existing console password Sw1(config-line)#line con 0 Sw1(config-line)#password 

  Write the running configuration in the configuration file with the write memory command.

  Sw1#write memory Building configuration... [OK] Sw1#

  For factory reset:

  do not give under the control of factory reset

  Switch#copy flash:config.text system:running-config

  can I copy the running configuration to Flash

  Switch flash running-config #copy:

  Destination file name [running-config]?

  Building configuration...

  [OK]

  Switch #copy running-config startup-config

  Name of destination file [startup-config]?

  Building configuration...

  [OK]

  Review the link for more information below

  http://www.Cisco.com/en/us/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml

  Please note the useful messages.

  Concerning
  Vesta
  "Everybody is genius." But if you judge a fish by its ability to climb on a tree, he will live his entire life, believing that this is stupid. "

• Lightroom 6.6 Menu is not in line with the buttons

  After the upgrade to Lightroom 6.6 part of the menu do not align with the buttons.  For example, when you use the crop and straighten tool, next to the "Aspect" If you click on 'Original', a menu will appear with different options.  Before the menu seems very close to where I clicked, but since this last update it shows up in the lower left corner (essentially the opposite side of the screen).  See the screen capture below attached.

  Note that this happens with everything except menu for windows menu bar items (IE IE file, modify the work correctly, but others such as the Balance of whites, lenses, ect. correction show this problem).

  I don't know if that's a bug or an intervention of the strange apparatus that causes this problem.  I work on a Lenovo Yoga 2 Pro, so the screen resolution is 1800 x 3200.  It is also a touchscreen and 10 Windows running.    Note: I've also uninstalled and reinstalled lightroom, without modification.  Any help with this annoying problem would be appreciated.  Thank you.

  

  A known issue also noted in this thread-

  Some menus pop up in the wrong place

• Urgent! Master - detailed with the option/Hide search

  Hello
  
  I developed a page OFA master / detail with the option/Hide.
  
  in my search option, I have main and detail columns.
  
  
  How can I control query vo level of detail.
  
  
  For example. If I pass point not in the search option as well as customer, I could get only this line item for this CUST.
  
  
  I created the main query parameters and I'm passing param values in a methos to AM.
  
  When I click on show details his exception throw.
  
  
  Can someone help me please how to do this. Its urgent...
  
  
  
  Thank you

  Hello

  Error is due to the original Version of details may not get the value of the bind variable when judicially.

  Check your steps with this link http://apps2fusion.com/at/51-ps/333-oa-framework-master-detail-region-mandatory-steps.

  If still you face the same thing then let us know.

  Kind regards
  GYAN

• BlackBerry smartphone how to remove all the data on my blackberry when the buttons do not work?

  I have a Blackberry Curve 8330.  Yesterday the buttons stopped working.  I could use the phone only via Bluetooth.  Based on the information from this forum, I tried a number of hard resets and updated operating system.  None worked.  Verizon is to exchange the phone, but I don't want to send the phone back with all my info on this subject.  Is it possible to erase all the information on the phone without using the keyboard and the normal delete process memory?

  You can make a backup of the device using Desktop Manager > back up everything first.

  Then, you can use JLCmder to reset to factory settings:

  Follow the instructions in this link:

  http://www.BlackBerryForums.com/General-BlackBerry-discussion/18789-Jl_Cmder.html

  At last-

  This looks like what I've seen several times on a device with moisture damage.

  Even sitting on a countertop bath during a hot steamy shower or bath can cause the trackball and keyboard problems until this THAT well dry.

  Really, it is more common than you think.

  1 the battery immediately! Do not turn on your BlackBerry device.

  2. allow the device to dry in a warm, dry place for 3 to 5 days * (see below)

  3. DO NOT "check it every day" by placing the battery in. Leave what would to dry completely. It takes time. Replacing the battery to check it can damage only (humidity + power = disaster).

  3. If the unit is hot after the drying period, let it cool to room temperature before placing the battery in the.

  * Suggestions on your BlackBerry in a warm dry place (open, with battery):

  • Place the BB in a container of dry uncooked rice, and then you can also place it in one of the locations mentioned below.
  • On top of all heat dry emitting electronic components: TV or CRT, LCD, TV cable box / Satellite or plasma monitor
  • On the dashboard of your car on a day sunny