Model questions

Similar Questions

• Satellite C650 / 01 M - model Question

  I just bought a C650 / 01 M for my parents. When I tried to find the model number, it does not seem to exist. There is a similar template on the site in Canada and europe, but not the exact model. It was a D * ck Smith "exclusive." Maybe that's the problem?

  The model (SKU) is PSC12A-01M00T

  I would really have no idea where to find them. And what do I do for warranty if the model does not exist?

  Hey,.

  I searched a bit using Google and it seems that an Australian cell phone model. I found it on Australian page:
  http://www.MyToshiba.com.au/

  So for the case of warranty you must correctly helps an Australian ASP.

  But all the drivers and downloads available on this page. :)

• Satellite 1800 model question

  Hello
  I have a toshiba satellite 1800 laptop model number ps183a-01mtc. I'm looking for programs and an update of the bios for it. but I can't find my model. all downloads are listed as 'Satellite 1800-xxx' could you please tell me who is a mine. If you want more information, just ask.
  Thank you
  Nick

  At the bottom of the unit, you will find a label including all the information on you laptop.
  (Detailed name and serial number)
  Where did you come from? Have you bought the laptop in US or Australian?

• Import of a SPICE Supetex model - questions

  Hello

  I have a. File MOD of Supertex for one of their MOSFETs. I tried to import the component in to multisum the "component" Wizard of multisim, but I always got the error...

  -Checking SPICE netlist for designs 1 - 4 June 2013, 15:53:44 -
  Error of SPICE Netlist in schematic RefDes 'u2', 'mosmod' element: unsupported type of model 'PMOS.
  Error of SPICE Netlist in schematic RefDes 'u2', 'm1' element: type of device unsupported SPICE "MOS7."
  = SPICE Netlist verification completed, 2 error (s), 0 warning (s) =.

  Why multisim don't care what model? And how can I change to solve the problems?

  The model, which was provided to the East:

  . SUBCKT TN6420 1 2 3
  11 2 3 3 M1
  + MOSMOD
  + L = 3E-06
  + W = 0.058
  + AD = GRADES 9-12
  + PD = 1.2E - 05
  + AS = GRADES 9-12
  + PS = 1.2E - 05
  JMOD JFET 1 3 11 1
  * AREA = 1
  3 1 led 1 Cbody
  * A = 1
  1 11 Rdummy 1E + 06
  . MODEL JMOD NJF
  + = - 10 vto
  + beta = 0.03864
  + is = 1E-15
  + = 3.281 rd
  + lambda = 0
  . Diode MODEL D
  + is = 1E-15
  -n = 1
  + r = 1
  + bv = 250
  + ibv = 0.001
  + tt = 1E-06
  + cjo = 8-11
  + vj = 0.6
  + m = 0.5
  . Model MOSMOD NMOS
  + = level 7
  + version = 3.2
  + paramchk = 1
  + mobmod = 3
  + capmod = 3
  + noimod = 1
  + delta = 0.01
  + tnom = 27
  + tox = 7, 5th-08
  + toxm = 7, 5th-08
  + 7.739E = + 16 nch
  + xj = 5th-06
  + vth0 = 1.1
  + k1 = 0
  + k2 = 0
  + k3 = 11.69
  + k3b =-22.99
  + w0 = 0.0001
  + nlx = 0
  + dvt0 = 2.2
  + dvt1 = 0.53
  + dvt2 = 0.05058
  + dvt0w = 0
  + dvt1w = 5.3E + 06
  + dvt2w =-0.032
  + eta0 = 0
  + features = 1581
  + d Sub = 0.56
  + u0 = 261.1
  + au = 1E-10
  + ub = 1E-20
  + uc = - 1-09
  + = 1.778E + 04 vsat
  + a0 = 0
  + ags = - 1
  + b0 = 0
  + b1 = 0
  + = 0.136 keta
  + a1 = 0
  + a2 = 3.414
  + rdsw = 3.273E + 04
  + prwb = 0.3214
  + GTRP = - 10
  + wr = 1
  + wint = 0
  + wl = 0
  + RFD = 1
  + ww = 0
  + wwn = 1
  + wwl = 0
  + dwg = 0
  + dwb = 0
  + Toys = 0
  + He's = 0
  + lln = 1
  + lw = 0
  + lwn = 1
  + waterline length = 0
  + = 0.0157 voff
  + nfactor = 0.7
  + cit = 0
  + cdsc = 0
  + cdscb = 0
  + cdscd = 0
  + cffp = 0,1
  + pdiblc1 = 0
  + pdiblc2 = 1E-06
  + pdiblcb = 1
  + drout = 0
  + pscbe1 = 3.548E + 08
  + pscbe2 = 1E-09
  + pvag = 1E-06
  + alpha0 = 0
  + alpha1 = 0.04694
  + beta0 = 210,8
  + js = 5-10
  + jsw = 0
  + nj = 1
  + ijth = 0,1
  + cj = 0
  + mj = 0.2387
  + pb = 0.3
  + cjsw = 0
  + mjsw = 0.33
  + pbsw = 0.3
  + cjswg = 0
  + mjswg = 0.33
  + pbswg = 1
  + cgbo = 0
  + cgdo = 0
  + CASE = 0
  + cgsl = 4.5E - 09
  + cgdl = 2.8e - 09
  + Shorty = 0.6
  + cf = 0
  + noff = 1
  + voffcv = 0
  + cela = 1
  + less = 15
  + dlc = 0
  + = dwc - 3.584E - 08
  + llc = 0
  + lwc = 0
  + lwlc = 0
  + wlc = 0
  + CME = 0
  + wwlc = 0
  + clc = 1E-07
  + key = 0.6
  + Elm = 2
  + xpart = 0.6
  + kt1 = - 0.11
  + kt1l = 0
  + = 0.022 kt2
  + ute = - 1.5
  + ua1 = 4.31E - 09
  + ub1 = - 7.61E - 18
  + uc1 = - 5.6E - 11
  + a = 3.3e + 04
  + prt = 0
  + xti = 3
  + tpb = 0
  + tpbsw = 0
  + tpbswg = 0
  + JCT = 0
  + tcjsw = 0
  + tcjswg = 0
  + af = 1.5
  + ef = 1.5
  + kf = 1E-17
  + Ms = 4.1E + 07
  + noia = 2nd + 29
  + noib = 5th + 04
  + site = - 1.4E - 12
  . ENDS

  Thanks for any help in advance

  Rob

  It seems that this subcircuit, written for a specific in mind Simulator, attempts to use the BSIM3.2 mosfet model. We have BSIM3.3 = 8 level. Simply change the value of the parameter level of 8.

  Here is a table of our help documentation:

• Runtime Android and model question BB10

  Hello

  I have an Android app that works very well on the Blackberry Playbook.

  According to the value of Build.MODEL to the Android SDK, I display a message to the user about the model of the device.

  For Blackberry Playbook, Build.MODEL returns "BlackBerry Runtime for Android applications".

  At the moment, I have trouble running BB10 Simulator to check what is the value returned by BB10 device so that I can display the appropriate message.

  Does anyone know what Build.MODEL returns Blackberry 10? Is this the same as on the Playbook?

  Thank you.

  Katerina

  In my alpha dev machine, I get '10 Dev Alpha' when I get the Build.MODEL

• Model question

  I ran into a situation.  I would include various parts of a page on the pages of different "child."  Is it possible to create a template, then insert this model into the desired pages.

  Example: have a model that is just the header and insert that into the pages needed.  Another model for the testimony and insert in the pages, I want it to appear, etc.  ??

  For the moment I've been passing by and edit each region one by one, but it would be much easier to find a way to use templates for this...

  Consider using excerpts, or library, or preferably inclusions elements side server for this function.  For example, when I create a site, the navigation of the elements always go into the side Server includes.  In this way, I make a single change in the include file, upload that include files, and all pages automatically inherit this change.

  Patterns are whole pages, not parts of pages, although a single model can contain a host of these replaceable items mentioned above.  And not to be prey to the idea of using nested templates or several models of a single site.  Two of these approaches are going to unnecessarily complicate your life.

• PE9 marriage model questions

  Hi everyone, I'm super happy recent owner of the PE9 and I started my first projects recently, which is a wedding ceremony. As I used the first model of available marriage, called "outdoor wedding" (must be something as out of wedlock or something), I noticed that the video loop & associated Bo are limited to 30 seconds. Who is customizable? In my case it is absolutely not interests, as my loop was for 60 seconds, and the soundtrack is cut off after 30 seconds, which gives a horrible effect.

  

  also, I noticed that there is a problem with the windows of the second of the scene selection menus, as it has no associated text box, is this a known bug or am I stepping on something new?

  

  

  I'm a little dessapointed this model fits perfectly to my project, and those things kind of pull down.

  Thanks for your help...

  In any case, thanks for taking the time here, really appreciated! Problem solved!

  That's the big words!

  The difference between the "leaves" and the "triangles" is probably a modification made by Adobe at one point. My American pre version 4.0, has triangles. This change could come along the production of pre race 9.0 and perhaps did not appear in the French version. I would raise the chances that some engineer at Adobe has just decided, 'hey, we used these triangles for a long time. Since that a marriage "outdoor", why do we not use leash, instead? "And it was the leaves.

  Also, if you notice the location of the triangles (subpicture highlight), they are in the corner of the display video thumbnails. In your version, they are next to the button, the title text. In some languages, the text of the title could be long or short enough, so has probably decided to just the subpicture highlights as part of video thumbnails, as what will change the TOS, as a chain of title text would be. Because most of the Menu pre sets welcome any possible install languages, some design choices need to be made - I would speculate that for the currently installed version, these changes appeared in the subpicture highlights the value of this Menu.

  Good luck and thank you for your success, the report

  Hunt

• Nested model question

  Hello, I would like to do a nested model of a master model; However, I don't know how to get the desired result.

  The master has a sidebar menu item which is not editable which will apply to multiple pages. I would like to make the model nested without the side menu, but don't know who to make an editable in the nested version.

  I might just do an another master without the side menu, but this would make the update of changes to the site level more complicated.

  Any suggestions? Thank you.

  I'll be able to edit the menu as a library item and any changes will take place in each of the pages that this element is located in? Thank you

  The convenience to do this entirely depend on how you built your menu.  I almost always use ProjectSeven PopMenuMagic on my sites, and the edition menu couldn't be simpler.  Once you create the menu, you would never need to touch anything other than the HTML part of things - the CSS and javascript are always the same (and in addition, they are related to the parent, not the library in any case item folder).

  I suggest that practice you this dance with a few test pages first.  Enter a CSS/Javascript menu in a library of point/include file requires some skills and knowledge of HTML.

• Deduplication of data, modeling question

  I have a following arrangement:
  
  DimX Dim1 1:M FactM1 M:1
  DimX Dim1 1:M FactM2 M:1
  
  What business user wants, that's
  1 Fact1 and Fact2 work with DimX and Dim1
  2. what Fact1 Dim1 and DimX overall Fact1 numbers must not resume even when DimX repeats.
  To illustrate this... Assume that the data are the following...
  fact1-> mea $10
  dim1-> att1 "xyz".
  dimX-> att10 "aa", "bb".
  dimX-> att11 'xx', 'zz ',.
  
  Then, when the user draws the columns
  MEA$, max(mea$), sum(mea$), dim1-> att1, dimX-> att10
  10, 10, 20, "xyz", "aa".
  10, 10, 20, "xyz", "bb".
  
  Note: The sum of 20 is due to dimx-att10 is aggregation for dimX-> att11
  Also, when the user puts the money on the table, he gets values such as
  
  MEA$, max(mea$), sum(mea$), dim1-> att1, dimX-> att10
  10, 10, 20, "xyz", "aa".
  10, 10, 20, "xyz", "bb".
  10, 20, 40, <-total line
  Yet once this years wrong, since
  1. I put 'Aggregation rule' on mea$ (no aggregate column) to get the sum, which summarizes blindly
  2 max(mea$) gives the maximum value, that 's going to be bad as soon as I get a more values of dim1-> att1.
  
  Please suggest how to solve this problem.

  Without data warehouse environment (you cannot create a table of bridge or the transformation of data), you must create/set a function to get only on your many-to-many dimension line (for example, max, min, top1...).

  10, 10, 20, 'xyz', 'aa'
  10, 10, 20, 'xyz', 'bb'
  

  will become

  10, 10, 20, 'xyz', 'aa'
  

  I don't see other possibilities.

  Otherwise, you must use a data integration tool to model another design.

  See you soon
  Nico

• Model not to ask questions.

  Hello

  I'm deploying templates for an Avaya solution, I'm working on that. But when I deploy them it is supposed to be a couple screens with questions that arise for information ip, dhcp, ntp, etc... etc... But this screen never shows and the EGGS will complete the installation. After the installation I can turn on and manually enter information and EGG works very well, but I would like to know why I can't get this EGG model question screen pop up. This screen also appears on other facilities of ESXI only difference, is that they are entirely esxi servers under license for the use of the company.

  Building (lab at home)

  ESXI 5.5.0 (license free House)

  Reference Dell R610 2 6 core processors

  24 GB ram

  To enter parameters while deploying an OVF/EGGS, you must run the deployment while being connected to vCenter Server.

  André

• HP Envy 15 t (G0T59AV): HP Envy laptop speaker poor sound quality (particularly acute) as the volume increases.

  I had been without my HP Envy laptop a few weeks after he bricked on me and I had to send in for repair, and when I came back the sound quality seems to be noticeably worse than what I remember. The sound in general seems a little intestine initially, and it does not handle certain tones fine treble, producing shrill notes that almost seem like they're clipping or something, as if it's too much for the speaker to manage. The volume level refers to it - it's much worse at higher volumes, but its volumes, it should be able to manage, and has dealt in the past. 30 is basically normal, I'll hear parts of it start happening about 40 volume or so, 60 sounds evil, and 80 is almost inaudible.

  My first suspect is the dustbin of Beats Audio with what they sent this thing.  He gave me problems before. I fiddled with the Beats Audio settings for a bit and couldn't find a lot of luck. The strange thing is, I searched Beats Audio driver updates, and I came to the top completely empty. All links to them were either broken, be directed to the page of HP support containing the drivers for the specific device model questioned. The driver for my laptop page shows nothing about the drivers of beats. And my device manager doesn't seem to show that no driver present Beats, either, even though I SWEAR there drivers for them in the past. The only present audio device is the Realtek HD Audio driver. The Beats Audio utility in the taskbar does not seem to think there is something wrong, however, so I don't know what's the case. Can someone help me?

  (I know of no reason that the question I sent my laptop in for repair would be linked to this, nor do I have any reason to believe that the person who repaired the laptop could have done anything, as all my files on my HDD seem to have been completely intact, but just for the sake of rigour : A couple of weeks, apparently caused by me accidentally stick a 3.5 mm headphone jack into the adjacent USB and damaged brick my laptop. The computer, stop immediately, if she was able to start right back up. The next morning, it was completely insensitive and would not start until it was. I knew with certainty that it is the USB at the time, I thought that it was unlikely that a damaged USB port might cause a full brick computer, but when I got back from repair, the repair summary said that the only thing to do for she was replacing a USB port.  Other than the good question, my computer was working perfectly since.)

  Hello
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY 15 t-k100 Notebook and problems with sound not working not properly. You can try-

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on the speakers.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window. Reboot the laptop and test the sound.

  You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a link to a Microsoft fix for Windows 10, that might help.
  
  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below! .
  
  Thank you.

• If she refuses to install.

  I tried muiltple time trying to download it and it keeps telling me that it is not taken in charge for a reason any. I'm working from a PC, a newer version, I just bought this month. so I know this isn't an older model question. also I don't have a box of download file to install from there either.

  What refuses to install?

  When you ask a question you will need to provide some basic information

  -Forum quick start https://forums.adobe.com/docs/DOC-5601

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

  Exactly what version of the program do you have problems?

  This error message you see?

• Subject of the exam 1z0-462, Webcenter Sites Certification

  Hello world.

  
  

  I want to take the exam in the next few days, but I couldn't find any sample question, can someone give me some questions? or can someone give me some instructions on what kind of questions I will find on the real test?

  
  

  Thank you.

  Hello Rvillamarin,

  I took the time to review there is and the condition of having a good experience you will not have to work too hard. I know that this doesn't look like a responsible Board, but if you struggled with installation, configuration and coding model you are likely to spend.

  You are going to get some general questions such as default roles, users, ACLs, etc., are the easier questions.

  Then you will get a lot to publish questions and workflows too with different scenarios where you will have to provide the best use cases for a specific need.

  You will see some model questions, particularly involving cache.

  As you can imagine, the current model will be represented in a good number of questions too.

  Your messages in this forum, I assume you have experience with this product, especially the installation, so you should be at least in a good starting point.

  Good luck!

• Write multiple strings

  Hi all
  
  I wonder if there is a way to write several strings in a text file with FILEIO. In particular, I am interested by the following:
  
  global customscript
  on saveAnINI2
  Question of value = the text of the Member "Q".
  gFileIO = new (xtra "FileIO")
  gFileIO.createFile ("dialogue.aiml")
  gFileIO.openFile (dialogue.aiml", 2" ")
  gFileIO.writeString ("category of <>" & RETURN & "model <>" & Question & "</pattern >" & RETURN & "< template >" & customscript & "< / template >" & RETURN & "< / category >")
  end
  
  The question and customscript variables capture the user input to two text cast members. My problem is that, although it all works well for 1 entry, I am unable to write several strings in the file dialogue.aiml. No idea why? To be more precise, the above code will write the following to my dialogue.aiml file:
  
  < category >
  < model > what of Monemvasia? < / pattern >
  loc89.HAP < template > < / template >
  < / category >
  
  Once that my user updates the values of the question and customscript the above string is updated with the new values, although I wanted to be something like:
  
  
  
  < category >
  < model > what of Monemvasia? < / pattern >
  loc89.HAP < template > < / template >
  < / category >
  < category >
  < model > what is the Greece? < / pattern >
  loc90.HAP < template > < / template >
  < / category >
  
  
  and so on
  
  Thanks much for any help!
  

  You may wish to use
  FileIOInstance.setPosition (FileIOInstance.getLength ()) to place the
  "write head" at the end of the file before you add the new text, otherwise
  you're going to replace what already exists. Check the docs.

• Hard drive replacement and warranty question Portege and Tecra models

  Good afternoon

  I'm hoping for a little clarity if a laptop warranty is invalidated if the hard drive is replaced for another title of model/difference. The company that I work buys models Tecra and Portege for these last years, if we decide to buy more large hard disks and get our IT Department install them will be that gap in the agreement of guarantee with Toshiba?

  I talked to Toshiba and they were a little gray in their response. They said that, if you didn't damage the laptop, it should be fine, but if you send it as an unrelated question, with what they can carry out repairs on the laptop if the hard drive does not match the orgional one provided...

  Can somone if this is the case? It seems ridiculous that you would not be able to replace the drive even if bought from an official and used dealer in a corporate environment.

  Kind regards

  Jonsey

  As much as I know RAM and HDD upgrade do not negate the warranty. For many models of laptops, you can find instruction how to do this. It is described in the document of the user s manual or you can find short videos on Toshiba documents (knowledge base).

  Even on this forum in the USER SELF REPLACEMENT section you will find instructions how to replace the hard drives.

  What you can also do is to contact the nearest Toshiba authorized service provider and check what they say on this subject.