Write multiple strings

Similar Questions

• Write the string to the ini file problem

  

  I was tring to write a string in an ini file, which should be:

  [Basic information]
  File Name=C:\\11111.doc

  but the result is:

  [Basic information]
  File Name="C:\\11111.doc.

  whence the double quote come?

  got it, thanks

• Modbus write multiple registers incorrect version

  I use NI Modbus.llb, found on the site OR somewhere...

  Now, I found the broken wires by calling vi because MB series Master query write multiple registers (poly) .vi has an output at least (probably written content, read later... check...)

  Where can I find the good .vi MB series Master query write multiple registers (poly)?

  Thank you

  It may also be that previous guys changed the Modbus function OR...

• Write a string and an integer and a table all in the same file?

  Hello

  I am currently it several different types of values with LabView.

  I have a shot, a few numbers and several paintings.

  Thus, for example, I have a timestamp of the chain, several values of "integer" amplitude of the signal for example, RMS value, frequency and I have several paintings - table of signal, the FFT (PIC and location) values.

  Basically, I'm trying to find a way to write all the values in a single file. I can write all the individual types to separate files (so I can write the RMS, amplitude and frequency to a single file, some of the tables in the other)
  but is it possible to write a string and an integer and a table all in the same file?

  Pointers would be much appreciated,

  Thank you

  Paula

  Your file will be all text... any format in a table of text, to build as a single table, "table chain worksheet", to write to the file.

  (I'm sure this has been on the forums before... a search it would have thrown upward)

  

• Write a string of text with .write

  Hi, I did a lot, but for some reasont (that I don't see clearly right now), I can't get it to work.

  1. I collect the text of a specific layer of a bunch of InDesign Document and store them in "myDatas".
  2. I convert a string with 'join' myData (I guess that's not necessary, but I'm out of ideas)
  3. open/create the text file
  4. (try to) write the string inside
  5. Close the text file.

  The result is an empty text file but my alert show my all of my collected texts!

  And if I do

  myStories = "from the text of the string.

  This text is in the text file

  var myTxtFile = File ("~/Desktop/" + myDocumentNumber + "_Texts.txt");

  myStories = myDatas.join ("\n");

  myTxtFile.open ("w");

  myTxtFile.write (myStories);

  myTxtFile.close ();

  Alert ("myStories:" + myStories);

  first try to define the encoding and the line break:

  myTxtFile.encoding = "UTF-8";

  myTxtFile.lineFeed = "Unix"; One of the values "Windows", "Macintosh" or "Unix".

  What is happening on Mac or PC? Think that I #ve read about it, but it would be too much to google

• Extract strings in the tdms files and write the strings in the file txt or lvm

  Hi all

  I'm struggling to extract strings from a file of tdms to write them in a txt file.

  The strings were written in tdms is a time stamp data recorded to a compact RIO.

  I put the chain in a different group from the PDM, but when I use the function read tdms with the group name, as I said, an error message is always take place.

  Thanks for all the help.

  PS: I have attached an example of tdms file I got over here.

  Kind regards

  Yifeng

  I tried your attached file and it seems that everything goes file. I have attached the screenshot of my VI here, what do you want?

  

• How to write multiple entries with KHz sampling frequency in a file outside the loop?

  Hello

  I am able several entries of string tension using the wizard DAQ (1 sample on request) and it is placed inside a timed loop of frequency 1 KHz.

  This timed loop is placed inside an another while loop.

  Problem is with writing data to a file, although I can see 100 samples of 100 ms in the graphics cable to the out of the way, but the extent of writing to output file stores either only from 19 to 20 samples per second (when he wrote inside the timed loop) or does not store any (if placed outside the timed inner loop).

  I tried to set up producer consumer structure but in the loop of the consumer, I can't write the data in queue to a file saying data type mismatch. I placed the loop starting queue item and consumer out both loops and the element of queue inside the timed loop exit DAQ fed to the queue item.

  Can you please help me solve this problem file writing?

  I haven't looked so writing code from the top of the head, but access to the files is slow, and if you open and close the file, it is quite slow. What do you usually do it write to the file at a slower pace, for example once per second and write all the 1 k samples at a time. Try and also keep Ref file open during the test.

  /Y

• Writes the string data in a table

  Hello

  I am facing a problem in writing the data in the table. Here is its description:

  1. I created a code that reads the URL from OPC.server.

  2. I need to display it in a table. Since the number of URL is known, I defined the rows in the Table.

  3 but am not able to display these URLS in the table.

  This problem can be simply put on 'how to write string in the table. property node can be used and if so, what assets can be used?

  I'm still a beginner in this... so would like help of all my colleagues LabVIEWers there

  Thank you best regards &,.

  Nadège.

  This is a base update. The initialize array must be specified as a number greater than your maximum number of URLS.

  

• If the output of multiple string string

  Hello

  I have this string input of the serial port that looks like this:

  Voltage20Current10Temperature32

  They are all delimited by tabs.

  And I need them to divide into three outputs (possibly converted to numbers)-->

  Output 1--> 20

  Output2--> 10

  Output3--> 32

  Your help will be appreciated. Thank you.

  Hello Manu,

  Try the attached example.

  Kind regards
  Nitz

  (Bravo to give good answers, mark it as a Solution If your problem is resolved)

• Write multiple data in Excel

  Hello world

  I'm currently building a project to monitor the temperature of the room using LabVIEW v.6i. I'm trying to get the data (date, time, and temperature) in an excel file. The problem is now I want that data to be separated in the other column. So far the data are filled in a single column per row, according to the picture below. I enclose my VI as well.

  What I need to add to make day in a column, the time of a column and the temp in a colum, all in one line before the new data in another line.

  Thanks in advance.

  

  Change your tabs for commas and save your file with extension .csv. It should open up as you want in Excel (you will have to convert the value of type double to a string).

  Ben64

• write a string 2d for the excel file

  When I try to put my table in excel, the message appears and I can't open the file. The path is correct.

  

  In fact, a better example would be write Table to XL. Just use the Finder example (help-> examples find) to find. You can also read the thread Excel for many links to other examples on how to control Excel from LabVIEW.

• Error 7 open/create/replace the file to write spreadsheet String.vi

  Hello

  I try to use a CompactRIO with 9225 analog input module for measuring an analog signal.

  Version of LabVIEW is 2013 (32 bit), when I run only e VI, errot 7 has taken place.

  I'm sure that the path is correct, but the error information indicate used different path "------" is not "/", I have attached the picture.

  I don't know why this is happening, appreciate any suggestion to solve this problem.

  Thank you.

  Frank

  The cRIO-9075 doesn't have the ability to mount a Windows network share and the read/write directly with the host computer.  You'd have to do, this is the file from the FTP host (the host has to a customer, and the RT system has a server) or to run an FTP server on the host that the target can interact with (the host would then have a server, and the target's screws of the FTP client) to get the file to the location.

  -Danny

• Write multiple rows and columns of the worksheet

  Is it possible to write several rows and columns of the spreadsheet, with the ability to add data to the file and create a new file if it does not exist?
  I tried to write to table vi, but I couldn't make it work.
  It won't let me write several lines in the same column.
  Can someone please give me an example?
  Thanks in advance.

  If you want to use the tab character (\t) as the delimiter, then check the txt file.  Then Excel will open as you wish.

  If you want to keep the csv extension, then use comma (,) as a separator.

• purchase pdf writer multiple users

  Hallo,

  IK ben op search naar een pdf-versie voor different users, where wij existing good quality PDF writer. Site said kan Apparantely risk bij Adobe DC standaard en PRO versie.
  Both location we al gedownload free, nu willen we deze aankopen voor 5 users. Kan said enkel nog in of vorm van subscription? can we hoe deze versie met 5 fired aankopen FR?

  Thanks for all comment :-),

  Sabrina

  There is no free version of Acrobat Standard, so I don't know what you were testing, but you should take care to use only legitimate software.

  You can always buy a perpetual license, but it's a little hidden. Go to the Page of the Adobe products, click on the button buy Adobe Acrobat Pro (or Standard) DC, and then change the option 'I want to buy' to 'Full' (or 'Upgrade' If you have an earlier version of qualification).

  Select any other options, and then click Add to cart, proceed to checkout. You will get a full license, not a time-based subscription.

  Do it five times and you'll have five licenses... You can also check by getting a volume license. I'm not sure it's worth for 5 seats, but you can ask.

  To do this, you will need to contact the Sales Department of Adobe.

• Write multiple events created for a single value (signaling)

  Hello

  I have a program that checks continuously to check if a given amount of time has passed (e.g. 10 seconds). I pass the Boolean result to a case statement. In the case of FALSE, do nothing. Inside the case TRUE I wired the switch entry dealing with a property node: Val (Sgnl) in order to trigger an event. The actual value is not important, I just use it to trigger an event.

  When you view the event inspector window, I see two events are sometimes created at the same time, which causes problems in the rest of my code. I have the option 'max limit Instances"checked in the menu change events, as well as the number of Instances the value 1.

  Can someone please explain why this is happening and recommend a solution?

  Thank you.

  -Natsfan

  Add a wait of 1-2 ms to the loop in your main calendar.  It is conceivable that the loop takes less than 1 ms to run and you see the same time at two subsequent iterations of your loop and that's why you get sometimes two close triggered events

  I would not use a separate at all, but directly control the timing of the event timeout.