Model Z60t 2511 enhanced 100 GB to 160 GB - does not start!

I always used (successfully) Casper to clone hard drives for replacement.

I'm now replace a 100 GB with a 160 GB, but I fell...

What exact steps do I need to clone the hard disk of this model from 100 GB to 160 GB Hitachi HTS542516K9SA00 (5K 250-160) new.  So far, I tried every trick I knew and the new drive will not be the image, but just boots to hang.

This program of Casper, I bought a couple of years, now has missed?

Thank you!!

lorenajack, welcome to the forum,

clone you the drive with the (new) drive target inserted in the main drive in your Z60t? This is crucial in order to successfully clone a hard drive ThinkPad.

If you are looking for advice from 'cloning', you will find a wealth of information.

Tags: ThinkPad Notebooks

Similar Questions

  • Win7 SP1 - "Standard Enhanced PCI to USB Host Controller" does not start now

    After I installed Win7 ultimate SP1 fine, I've now that in the Device Manager for the "Standard Enhanced PCI to USB Host Controller" device: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

    Has found the solution on another site.

    In Device Manager, click the Standard PCI enhanced USB host controller that shows an error, just was two more separate the two display errors on mine, choose to uninstall, both. Then click Action - Scan for hardware changes at the top, Windows reinstalls them both and has done so well here for both.

  • 160 U does not start after changing from 4 to 8 GB Ram

    Hey community,.

    I just installed two new RAM DDR3 1066 MHz 7-7-7-20 204pin modules of Corsair SO-DIMM to improve my U160 somewhat. It runs a Win 7 Pro 64 Home and already has been improved with a Samsung 250 GB SSD.

    The BIOS indicates the RAM properly but no matter if I try for a normal start or economy mode, restarting the laptop once the windows colors appear when starting. 'Last known version' does not help, nor let him start via a bootalble pen which I also installed this version of Windows. Because there is no blue or black screen I guess it's not a physical problem, but a prob of victory.

    Someone an idea?

    Thanks in advance,

    Baschdel

    Maybe run mem test a bar at a time to see if its bad? run the test of mem on a USB drive or a bootable cd. Lenovo is known to support only a certain amount of ram, I guess to avoid problems and complications. It is not their problem if you exceed nominal max and it does not work.

    http://www.memtest.org/

  • "Accu full, 100%" but the green light does not illuminate.

    Until today, the light load on the front of the laptop went from yellow to green when the charge reaches 100%. It remains now to yellow.

    No idea why - and how to fix it?

    Thank you.

    Hello

    What brand / model of the laptop?

    If the light does not change to green and the battery is not getting fully charged. Try the methods provided and check.
     
    See the link, then run the Fixit.
    The problems of power consumption and extend laptop battery life
    http://support.Microsoft.com/mats/windows_battery_power_settings/en-us
    Method 2:
  • My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

    Hey guys, so I have an ASUS X502C and last night, it has become very slow, that I tried to close all pages open and it started making a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

    Hey guys, so I have an ASUS X502C and last night, it has become very slow, I tried closing all open pages, and he started to make a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

    Hello

    Looks like a hardware failure.

    Try to reinstall the operating system:

    It comes to the use of the Asus restore procedure.

    http://www.ASUS.com/support/FAQ/1006133/

    See you soon.

  • Satellite L50-A-160 does not start after the Bios Update

    Hi, first of all, this is first post.

    I have 2 satellite L50-A-160 with bios 1.1

    Problem: seems to go to sleep after a few minutes, even working on them (even with both)

    So, I found an updated version 1.9, downloaded and running on one of the laptops. the biosupdate tool found matching the BIOS and a race.
    In the middle of flashing, he fell asleep. turned on and not start. What can I do? Recovery options? I guess the same thing will happen with the other too...

    What is the problem with these computers?

    Besides; very poor battery, always shows 0% available and not charging...
    Does anyone have a solution?

    Best regards
    -always in the hope.
    GT

    Have you tried to change in Power Options?

    See screenshot and try to change the ones I marked (it can refresh the settings, just change the values) and see if this solves the problem.

    and for the other laptop with no boot, a laptop sleep by updating the bios will surely mess it.

    what I don't understand is why your sleep laptop BIOS update, as far as I know the sleep settings is active then on windows (since this is controlled by windows)
    He does not sleep while in the BIOS you leave 1 year, sleep settings active only after loading windows.

    have you tried to check the time of processor for your laptop? Maybe its overheating causing auto-off

  • Compaq Presario CQ71 Ser: CNF01002QT model CQ71-4142F - Dead - no power supply - does not start - no led

    Hello *. *

    First time here...

    Compaq Presario Notebook Win7 32-bit - 4 GB DDR2, aged about 3 years?

    A customer brought this with virus / malware issues - arranged.

    On start-up, the bios made regular account that the HP OEM battery must renew. Not difficult technical question here.

    Powered on the laptop without the battery and the pc has stopped completely after a few seconds.  No beeps, no LED. Suspecting power, the original showed 19.* * volts. Ok.

    Bidirectional p - s for another check the jack plug connection. No change, tried jumping jack plug connection.

    Out two-way RAM for good, no change.
    Two-way 2032 battery of the bios for good, not change.
    Removed HARD drive, no change.

    Non-powered from DC or battery, depressed and button who was held for at least a minute, without change.

    The bios battery removed for 30 minutes, without change.

    Fan do not get stuck.

    No attached devices.

    Remarkable:

    Without battery : white DC power LED stays on for about 5 seconds. And then off.

    Old battery included: white DC power LED does not illuminate.

    I did not remove the optical drive, because I think it's ok. Works fine (or used to).

    I am familiar with this series of Presario laptops / laptops and while I have tried everything I know, I was wondering if, before I have conviction as having a short-circuit motherboard / failure, is there anything else I can try with this model of HP laptop before I am progressing with the send for repair of component.

    Thanks in advance

    Nick

    Freelance technician PC technical support

    Compaq Presario CQ71 CNF01002QT / WR067EA #ABF model CQ71-4142F - Dead - no power - no Boot - no led

    With everything else has been tried, it does seem to be a hardware problem at the moment. It is more than likely isolated pay-per-view system, based on the symptoms. I'm sorry.

  • CPU at 100% with the Task Manager does not display what makes

    I have a new computer, less than 2 months and it came with Windows 7. Last week, my computer went from the status fast trolling, does not without apparent cause. I'm not a computer expert, but I ran that several malware and virus scan does not. The Task Manager shows my CPU usage is at 100% but it only shows nothing running top 10 to 15%.

    I have an Acer Aspire 5517

    with and Athlolan processor TF-20

    3 GB of memory system 64-bit

    There are a variety of similar positions on the Internet that refer to this type of behavior, but not one that seems to be a guaranteed solution. A few success report by disabling the Windows Media Player Network Sharing Service, while others reduce the media files in folders that are monitored by WMP, etc..  You have a lot of media files?

  • 100% width slide show button does not appear in the toolbar

    I work with the latest version of Muse - but when you are working with slide shows - the 100% width button does not appear in my toolbar.

    Align is their - but no key width.

    Where is he?

    Hello

    Please ensure that the image of the hero is selected in the slideshow, if you still do not see the 100% button then click on transformation and you'll get the button.

    Please look at the screenshot.

    It coould be 2 reasons for the same.

    1. monitor size is too small to display all the options.

    2 muse is not maximized. (Enlarge the window of muse and it will show the button here)

    Concerning

    Vivek

  • Satellite P100-160 - system does not boot

    Hi all

    I was hoping someone may be able to help me with a problem I have with my Satellite P100-160.
    I was using it the other night without power connected when my battery ran out and he stopped.
    When I reconnected the power and it works I got the usual message asking if I wanted to start as normal I did.
    To do this i Gets the icon in the lower right corner telling me the system was trying to install a new mass storage device driver.

    He couldn't find it and I haven't added or removed something in my system.
    When I stopped and went to the re - start the next time, I received a message on the start screen in the sense of:
    error
    conflict of resources - controllers USB bus pci motherboard bus: 0a, device: function 04:01

    error
    resource conflict - controller mass storage of the pci on motherboard bus: 0a, device 04 function 02

    error
    resources - bus pci motherboard conflict: 0a, device: 04, function 03

    Press F1 to resume F2 to Setup

    I cannot go into the installer, but if I take the system just hangs and stop all the hard disk activity. I have managed to do successfully start once but no more, can't get into safe mode or anything. When I have it at my local computer store the guy he looked the error and said: it's broken, the motherboard has gone and there is nothing I can do with it. Im very disappointed that the laptop is only 2 years old and I would have thought that it would last longer than that.

    So my question s are the right guys, it's broken or is there something that can be done with it? If it is broken I can access the contents of my hard drive with another laptop (the guy from the store said something on to using a hard disk enclosure and use it as an external hard drive?)

    Thanks in advance for any advice

    D

    Hello

    It seems that the motherboard is affected
    In the message error - bus motherboard pci resource conflict: 0a, device: 04, function 03 the motherboard is mentioned, so everything looks like motherboard failure.
    But to be 100% sure you should ask the authorized Toshiba service provider of the opinion.

    Good luck

  • AT200-100 does not start after the turn off

    Hi @ all,

    I have a problem with my AT200-100 (bought @February 2012 in Hong Kong).
    In recent days, trying to find a solution.
    After using I turned off the tablet. When I first it overnight, it just goes to the Welcome screen "Toshiba."... "and then comes the animation of watering and then - nothing. Screen is black and start this new animation - without Toshiba's ' welcome' screen.
    After some time of the animation, the same thing happens again and again and again...

    I tried to leave it on until there is no more power then I loaded the Tablet and tried again to start. Same situation again.
    Could someone tell me what to do?
    Thanks for your help...

    Hello

    Looks like that Android has been corrupted, have you tried entry recovery mode and do a factory reset?

  • Satellite L300-100 does not start

    Had some problems with my Toshiba L300, which would close sharply down. However, I have a problem with battery or adapter. Power adapter has been checked and bought a new battery. Now, the computer does not start. None of the traffic light turns on and I can just hear a sound like a clock click click when the power cord is connected.

    Any idea what can be wrong?

    On the virtual path that is not easy to offer the exact diagnosis, but for me it looks like a malfunction of the equipment. If there is no light or any reaction when you connect power adapter, it is possible that electronic power supply do a few worries.

    Maybe you should contact Toshiba service and allow to check the motherboard.

  • CARD FAX MODEM PROBLEM. THE SERVICE DOES NOT START. SOMETIMES THE ERROR 1609 OR 160...

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: THE SERVICE FOR MY MODEM DOES more UNEXPECTABLY. HE HAS WORKED FOR 3-4 MONTHS AND NOW I CAN NOT RECEIVE OR SEND FAXES. I TRIED TO ACTIVATE THE SERVICE, BUT I'LL TAKE THE MESSAGE, CONTACT THE ADMINISTRATOR. Help, please!

    It's Windows Phone 7 forums, if it is not related to your phone (and can provide us with more information) we can this route to the appropriate forum.

  • Pro-100 manual feed tray Canon does not load paper 13 x 19?

    When I go to print on paper 13 x 19 through the manual feed tray of orange light always lit flashes twice. I have to press the orange flashing light so that the paper through and start printing.

    Here's how it works; nothing wrong.

  • Model of HP laptop 15 15-d038dx: some keyboard does not - model 15-d038dx

    I spilled coffee with coffee (a sugar) dye on my computer laptop keyboard the other day and now some of the keys (t and y for example) no longer work.

    I tried to disassemble my laptop and clean the keys if possible, but I can't understand how to access the keyboard. Is their a video or written instructions on how to do it?

    If cleaning does not work, I want to just replace the keyboard, but I'll still need to know how to access the keyboard. Help, please.

    Thank you!

    Hello @DaMiEd,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

    I read your post about the problem of keyboard and wanted to help you!

    You can consult the following guide to help you with the removal or replacement of the keyboard:

    HP Notebook 15 PC Maintenance and Service Guide (Chapter 4, 62-68).

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

Maybe you are looking for