Models and Document relative paths

Similar Questions

• models and documents/directory local css

  I have reviewed the documents and technical notes online, but somehow missed how to do the following with the models.
  
  < root > (global.css)- + - < dir1 > (local.css), page1.htm, page2.htm...
  ................................ |
  "... +-dir'n ' > (local.css) page1.htm, page2.htm...
  
  I can't understand how to create a model that connects two of the global, site wide, css and a local, a specific directory, css.
  
  "" < LINK href = "... / global.css ' type = text/css rel = stylesheet >
  "< LINK href="./local.css "type = text/css rel = stylesheet >
  
  I tried a bunch of different ways, but the model application process changes the local directory to point to non-existent files in the Templates directory. I am looking for a way to block the binding of path in the model and it remained unchanged by the process of model when applied.
  
  Thanks in advance,
  Bud
  
  

  > Version: Dreamweaver 8.
  >
  > Attach the editable area of local style and put in @import are for example a

  If you set the href of the link external css editable, you
  don't have to remember to put it when you make a new page of the child.

  It will use the default value that you set when you created the combo box.

  
  

  With the code above in the head of a model, each page of the child it will be
  get this code:

  
  

  This ===>
  Untitled.CSS in SOME directory the file of the child is in. Who is
  what I thought you wanted the CSS "specific directory.

  Yes, it is modifiable in the pages of the child using model properties...
  But you don't have to put or change or never even touch him if you
  do not want.

• Relative paths for links

  Hello

  How can I configure the AI CC document-relative paths? For example, if I have a folder like structure

  .../Project

  .../Project/Source-images

  .../Project/AI-scripts

  .../Project/actual-AI-files

  you get...

  so now if I save the project on an external hard drive folder or anywhere else where I have to update the paths for all my documents in/Project/actual-I-files that are related to the files/Project/Source-images and/Project/HAVE-scripts, although the relative path remain the same. Can I use relative instead paths?

  Thank you

  Unfortunately you can not do.

  Only chance is to have all the files related to the same level as the file HAVE (no subfolders)

• Changes of relative path to absolute path when creating a child of the model

  Hello

  I found very useful model Dreamweaver features and was doing well until I created a child by selecting the Site template and the template file in the new Document dialog box to discover the following problem:

  In the template file, a path appears as follows:

  "" < link rel = "stylesheet" type = "text/css" href = ".. /.. / common/css/all.css">

  However, in the case of the child, the same path has changed to the following:

  "< link rel ="stylesheet"type =" text/css" href="file:///D|/xampp/htdocs/xyz.com/common/css/all.css ">

  I want to retain the same relative path in the child's file. Please advise me how it can be maintained.

  Thanks as always,

  EAD

  In the template file, a path appears as follows:

  " href =".. /.. / common/css/all.css '> '.

  It is not possible for a link appears like this in your model. This is because the template MUST be in the templates folder, which is at the root of the site. A single deep folder level, it is only possible to go UP one level to look for any other file/folder in the site. But your link says to go up TWO levels! Something wrong here. Is your template in the Templates folder? Is - this folder at the root of the site?

  Furthermore, Ben's response is quite accurate. Given that DW does not know when your page of the child should be registered, it cannot create the link until it is saved.

• How to read the .txt adfLib pot file to the model layer by using the relative path

  Hello
  
  In my application, I use the ExtendedDynamicFldTbl (extends weblogic.wtc.jatmi.DynamicFldTbl), which the manufacturer requires the field file path table as a parameter.
  
  In the API, it is said that this name of path can be an absolute path, a relative path to the directory where Java has started, or a relative path that can be found as a resource on the classpath.
  
  I have created this ExtendedDynamicFldTbl to the model layer project, placed the fild_tbl.txt in a separate package and pass the path relative to the DynamicFldTbl constructor.
  
  Given my code below to get the instance of ExtendedDynamicFldTbl
  

  package model.tuxedo;
  
  public class ExtendedFldTbl  extends DynamicFldTbl
  {
  
      private static ExtendedFldTbl extendedFldTblinstance = null;
      
      public ExtendedFldTbl(String tablePath, boolean flag)
      {
          super(tablePath, flag);
      }
      
      public static ExtendedFldTbl getInstance()
      {
          if (extendedFldTblInstance == null)
          {
              URL url = extendedFldTblInstance.class.getResource("resource/fldtbl.txt");
              if (url == null)
              {
                  throw new RuntimeException("Tuxedo Service : fldtbl.txt is not found in the path 'model.tuxedo.resource' ");
              }
              extendedFldTblInstance = new ExtendedFldTbl (url.getPath(), true);
              String[] list = extendedFldTblInstance .getFldNames();
              System.err.println("fldtbl loaded. Total FML entries loaded = " + list.length);
          }
          return extendedFldTblInstance ;
      }
  }

  I just added the output of the build of the layer model to view the project of the layer and tested. It works fine and I am able to get the ExtendedFldTbl instance with all loaded fields. But rather than add dependencies, if I create an adfLibJar for the layer model project and you add to view the project of the layer, it does not work. It is not ablt to read the file of adf lib jar file.
  
  Issues related to the:
  
  1. How can I solve this?
  2. Although I have kept the field text file table in the source of the project itself, when I read the url, it is

  "C:/Documents and Settings/raguramanv/Application Data/JDeveloper/system11.1.1.4.37.59.23/DefaultDomain/servers/DefaultServer/tmp/_WL_user/SampleWtc/3gkmt9/war/WEB-INF/lib/SampleWtc_Model_adflibSampleWtc1.jar!/model/tuxedo/resource/fldtbl.txt"

  Instead of the physical directory, how can I use application in model layer context?
  
  
  Thanks in advance
  
  Rambeau

  Hello

  Try /adf/ or /afr/ in the URL. Then includes the ADF resource loader which is used to get the contents of a lib of the ADF. Take a look at the structure of ADF library where the file is located in. It should be in a directory with /adf in the folder structure

  Frank

• I have a document composed of separate PDF files that reside in a folder and are related to each other through hyperlinks. Each pdf file is set to open with bookmarks displayed, however if I have a link to a PDF file to another and use the button "Previou

  I have a document composed of separate PDF files that reside in a folder and are related to each other through hyperlinks. Each pdf file is configurΘ for dΘmarrer with bookmarks displayed, however if I have a link to one PDF file to another and use the "back" button to return to my starting point bookmarks are replaced by "vignette". Is there anyway to prevent this?

  Hi Mike,.

  While the implementation of the links, if you choose to open the file in a new window then you will not experience this issue, then you can simply switch to the file view and previous bookmark will remain as it is.

  Is that what helps with your query?

  Kind regards
  Rahul

• Template file - y at - it an easy way to update the files related to a model, and download them (put) at the same time?

  First of all, I am a user of Adobe software for 20 years now.  I love the adobe range. I want to just clarify.

  Question... Template Files - y at - it an easy way to update the files related to a model, and download them (put) at the same time?

  Its been bothering me since I started using Dreamwever 10 years now, when you use template files to create small, who later turn wholesale websites. Whenever I update a template file I have to find each file in the files Panel, then download them. When I navigate through a lot of directories to find it can get a lot of time and boring.  Whey cant be just a button that does it? See the attached file.

  Is there a way to do this?  Any help would be appreciated.

  Thank you very much

  Andy

  

  The sync tool should do what you want (second "circular arrows" icon in the files window).

  Who checks your files against the files of the current server and download all that is changed. By default, is also download any file from the server which is more recent than your local files at the same time, but you can set it to 'Put the latest files remotely' rather than 'get and put newer files' and you should be good to go.

• Models and flight path images Mousedown

  When using the sites database model, and using the images and images flown over for the navigation, the mousedown slice does not appear when the page is selected, obviously because it restores the image by default the mouse upward when you load that specific page
  
  Is there a way to bypass the parameters of model for this and even more, to work around so that if the model is updated at a later date, it is not update Web pages using the template and overwrite the fix.
  
  I've seen it work in some sites, but can't remember where or do not know how!
  
  Thank you very much
  
  

  Murray,

  Finally cracked thank you and here is the final result :)

  http://www.mindsionline.com/

  Thank you once again!

• Documents concerning the MODEL and CONNECT.

  Hello
  
  I want to read "MODEL" and "CONNECT BY" Clause.
  
  Where can I find good material with examples of elustrative for the same thing?
  
  Thanks in advance,
  
  Mathurin Shetty

  -private clause type link
  Re: help again for the SQL statement

  -connect by...
  http://www.Oracle.com/technology/oramag/Oracle/05-may/o35asktom.html

  http://psoug.org/reference/connectby.html

  http://www.sqlsnippets.com/en/topic-11735.html

  Re: How I can to prevent ==> ORA-01436: CONNECT BY a loop in the user data

• Relative paths of the gateway requirements

  So I am using requirements gateway for a little while now and I are one of several developers to use, or one of the many people now the documents it contains.  We keep the Gateway project control requirements of source code with the documents and the project code in that respect.

  We met one of the problems was that this gateway requirements is configured as an absolute path if the path is not under the gateway requirements project path.

  Let's say I have a directory like this structure.

  \Requirements Gateway\ Q:\Project\Project [x]

  [X] Q:\Project\Project [x] \Project Documentation\

  Q:\Project\Project [x] Code\ [x] \Project

  When you add documents to the gateway requirements project it will add them however travel.  So if another developer gets the source on the V:\ drive control then it can not find documents or code.  We found that you can manually change the path of the documents to have a relative path by editing the .rqtf file manually in a text editor.

  Finally the problem.  This solution does not work for code TestStand or paths of LabVIEW code... why?  If I replace "[x] [x] Code\ \Project Q:\Project\Project"with"[, \Project[x] Code\ ' in the .rqtf project file and then open the project, it will say file not found.  The file may have been moved or deleted.  But all the documents that are configured to have relative paths work fine.

  Can someone tell me how to get access roads-related work for LabVIEW and TestStand code in Gateway requirements?  Thank you.

  Hooovahh-

  It is currently a lack of functionality for our types of TestStand and LabVIEW OR gateway 1.1 requirements. This is something that will probably fix us in the next version or Gateway requirements.

  Thank you for that bring to our attention.

• Urgent: how to create a shortcut with a relative path?

  I put a set of files and folders nested on a server on a network location.  (Use of office machines Vista; I don't know that the server is running.  The files are a text file and two Office 2007 files).  Users will copy this set-up files on their computer (there is a program of VBA macro in a Word document, they need).  They need tomorrow (Friday) and the shortcut path gives me fits!

  The hierarchy looks like:

  MainDir
  File.txt
  SubDir1
  Shortcut to the Word file
  SubDir2
  Word file
  Excel file

  I don't think even the paths associated with the shortcut until I looked a little deeper.  Because I put all the files and folders together on my computer, when I did a drag - move in the folder on the server, the target properties and start in the shortcut always pointed at my computer!  So now, I'm afraid that a user copy this on their machine will have a shortcut that points to ~ my ~ computer, instead of the file on their computer.

  I deleted the shortcut located on the server and creates a new one from the Word file in the directory on the server.  Better - I think - but it still points to the location of the server.  And it is even more likely that, when the user opens the shortcut, it will try to open the file on the server, vice the file on their computer.

  How can I create a shortcut to this Word file that will pick up the relative path from around where to reside?  I can just click > properties and change the target and start in paths?  Or do I need a VBScript or VBA?

  I have to get this done fast!  A kick - in the right direction is greatly appreciated.

  Ed

  Hi Ed,

  It is not possible to create a shortcut with a relative path.

  You can try the following allows to bypass and check if it helps:

  Create a shortcut to cmd.exe running the start command to open the current directory. Then set the MDC in the

  The shortcut properties.

  a. make a new shortcut to: cmd.exe /c start.

  b. now right-click on it and get the properties of the shortcut (shortcut tab).

  c. the shortened full path must have been set to this:

  %windir%\system32\CMD.exe /c start.

  d. set the directory of "start in" (i.e. DLG) to be a relative path:

  (Example for a shortcut on the desktop)

  ...\SendTo

  e. click on "change icon...". "and set" look for icons in this file: "to: %SystemRoot%\system32\SHELL32.dll and press ENTER.

  Standard folder icon will probably be in the lower right.

  f. now you can copy this file and simply change the "start in:" to make new related shortcuts directory.

  NOTE: The above steps are just an example, so try this at your own risk. And check if it works.

  You can also read the following article and check:

  Folder redirection fails when you specify the mapped network drive or the Environment Variable

  http://support.Microsoft.com/kb/321805

  You can check out the following link and also post your request in the Technet forum for further assistance:

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

  Hope this information is useful.

• Creating a shortcut with relative paths

  I'm trying to set up a folder so that I can copy a group of files from USB drives, and I want to place a shortcut to open the Powerpoint Viewer into a subfolder of this folder to copy.   When I put in place a regular shortcut, it creates the full path: 'C:\Users\xx\Documents\Thumb Drive Files\With CAD Drawings\Product présentation Files\pptview.exe training', and when they are copied on a USB key, it will not work because it seeks the path 'C:', rather than the relative path in the folder, \With CAD Drawings\Product Training Presentation Files\pptview .exe.  I don't remember how to set this up with relative paths.

  You can't go with shortcut, you use a batch file on the root of the drive that has an order of relative path for the first command in it.

• Relative path does not work in Captivate 9

  Hello

  
  

  I use the relative path (docs/document.pdf) to open documents of reference such as the PDF files in a new window in my captivate projects and they always worked until I upgraded to 9 Captivate. The path doesn't work anymore and opens a web browser window by default instead. Not sure if I'm missing something. The "docs" folder to call the PDF document found in the published folders (see image below). I appreciate all the advice.

  

  Well, it's been 4 days and I did not receive a response. I contacted support and they gave me the following instructions, in the case if you are interested:

  In order to link the document, select the action "Open url or file" and in the path, just put the name of the document [0.pdf]. Make sure that the document is in the published folder. So the lesson learned, keep documents directly in the published folder, all the subfolders [docs/document.pdf].

• Relative paths for assets with several users of Muse

  I have created a shared folder in Dropbox that allows different people with responsibility for editing my site, each with a licensed copy of Muse, to access the files of Muse. All the assets required for the sitting next site or in a subdirectory under the main file of the Muse.

  But because the literal path for the dropbox folder (or any other shared folder, I guess) contains his username, and because the link point to the shared folder can be arranged differently on their machine (some people mount dropbox in 'Documents', others also), the literal path to the file to Muse is distinguished by the user.  I guess this is true even on the same computer with different users.

  As a result of these literal paths differ, at the opening of the Muse site, even when all assets required by the site are in the same folder or subfolder as master of muse, each user is asked to re-edit the link active whenever they open it after someone else has and can of the moment of their side.

  There is no way to have Muse look relative paths instead of the railways literal to avoid this?

  Unfortunately, it is not possible to watch right now the relative paths instead of literal. It's a good request well and I'll take it to the top with the development team!

  Muse auto-liens all assets after the first warning of dialogue, however, correct? And out of curiosity, how this multi-user workflow going for you?

• How do you use relative paths in ColdFusion?

  I'm having a problem that I can not wrap my head around. I have 4 sites all reside under C:\ColdFusion9\wwwroot\websites\. Unfortunately, when I use relative paths, he always navigates to wwwroot instead of from this record Web sites. I want to make sure I can use relative paths which are always calculated in the folder root of Web sites instead of the ColdFusion wwwroot folder.

  I had a temporary difficulty just to create a mapping in the CF Administartor. Although, this became a problem because I had to change it whenever I worked on another Web site. In addition, it would work properly if I used a relative as path (/ documents). Instead, it only works if I did a relative as path (. / documents).

  Can someone help me solve this problem? I spent so much time to try things it's not even funny.

  I'm using the CF9 Developer Edition with Dreamweaver CS4.

  CF built-in web server only supports a virtual server for each instance of CF, so you should change it whenever you want to work on a separate site, or create a separate instance of CF using the Instance Manager in CF administrator You won't have a Instance Manager available, given that you have chosen the 'standalone' CF during installation version. If you have reinstalled CF to use the JRun multiserver option, you can install multiple instances of CF and each would have a port separated (8300, 8301, etc.). However, consuming also considerably more resources on your computer.

  The best solution for this is usually to install an external web server, IIS or Apache and use it with your single instance see IIS is a component of Windows, so the version of IIS, you can use is limited by the version of Windows you are using. If you do not have Windows XP, you will be able to use IIS to run several virtual servers. Apache won't work regardless of your OS, but can be a little more difficult to set up.

  Dave Watts, CTO, Fig Leaf Software