Modem port COM 3 is already in use

Similar Questions

• Satellite A200: Modem has an error 633: already in use or is not configured properly

  My laptop is A200-FE0.

  When I tried to make a dial-up connection, there is a window of error says:
  "Error 633: the modem (or other connecting device) is already in use or is.
  not configured correctly.

  When I test my modem by clicking the modem of the request under the Diagnostics tab in the modems tool of the
  The modem control panel, normally responds and seem to work
  correctly.

  When I test my modem using Toshiba diagnostic tools, it displays "pass" and I canhear the tone Dáil too.

  I tired to edition and reinstall the driver twice.
  But I can't make a dial-up connection and get error 633. I'm really upset about it.

  Please help me! Thank you very much!

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=27402

• Close the SMS port if it is already in use.

  Hello

  I try to open the port by SMS

  MessageConnection messageConnection = (MessageConnection) Connector.open (connection_name);

  It throws an IOException saying "cannot open: SMS Port already in use.

  Is it possible to close this connection?

  Thanks in advance

  Concerning

  Coralie.

  No, if you did not create yourself.
  You should check for that, although every time I met this error I used port myself (still active instance or not properly closed port)

• Error 633: the modem (or other connecting device) is already in use or is not configured correctly. Any solution?

  I have Microsoft Vista Home Premium edition. I use the data card (broadband +, model - HUAWEI EC1262) to connect to the internet.
  I get error 633 whenever I try to use the data card to connect to the internet on my laptop. He says that "the modem (or other connecting device) is already in use or is not configured properly" and preventing me from accessing Internet.

  I tried with a different brand of card data, but still getting same error. Map data even works on another laptop with Win7.

  I did all the options like:
  1 uninstall and reinstall modem drivers
  2. release the COM port and the new port assigng

  We always get but same error. Any solution for this problem would make.

  Have you tried system restore? If you can restore the system to the date where it worked fine maybe it will work.

  System Restore frequently asked questions.

• Problem: Error 633: the modem (or other connecting device) is already in use or is not configured correctly.

  While I am connected to internet using Reliance Netconnect Huawei 1260, the connection disconnects after 10 to 15 minutes. Shows as connected Netconnect but does not work. I try to disconnect the connection, but it gives an error.

  Reconnect to always remove the modem and then re - login again.

  Please provede me a permanent solution to this. I use Windows 7 Enterprise

  Hello

  1. If it works well before?

  2. what version of Modem drivers do you use? Do you have any other device connected to the computer?

  First of all, I suggest you to check if the modem is compatible with Windows 7.

  Check out the link:

  Windows 7 Compatibility Center:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  I would also recommend to connect the modem to a different computer and check if it detects there. If it does not work on another computer also, then the problem is with the modem and I would ask you to contact the manufacturer of the modem for any further assistance.

  Error 633 indicates that the port is already in use or is not configured for remote access dial out. You may need to check if the VPN and the connection connection try to use the same port that is causing the problem. You may need to check the settings of the modem and change the port for your needs.

  To work around this problem, use one of the following methods:

  Method 1:

  Reserves explicitly the TCP port that is used for the VPN connection. To do this, follow these steps:

  a. click Start, click run, type regedit.exe in the Open box and then click OK.

  b. in the registry editor, find and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters

  (c) in the Edit menu, point tonewand then click multi-string value.

  d. rename the multi-string value as 'ReservedPorts' and then double-clickReservedPorts.

  e. in the value data box, type1723-1723, and then click OK.

  f. exit the registry editor.

  Registry warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

  .

  Method 2:

  Use the netstat command to find the program that is using port 1723. Then, end the process for this program. To do this, follow these steps:

  a. click Start, click run, type cmd.exe in the Open box and then click OK.

  b. at the command prompt, type the following command and press ENTER:

  NETSTAT - aon

  c. in the result which appears, identify the process ID for the program, if any, who is using the TCP port 1723.

  d. at the command prompt, type the following command and press ENTER:taskkill/pid PID/f

  Note: The taskkill command terminates the process that corresponds to the ID of the process. The/F option is used forcefully to complete the process.

  e. at the command prompt, typeexitand press ENTER to quit the command prompt.

  Restart your computer. This may cause the program that uses the TCP 1723 port to use a different port.

  I hope that helps!

• TECRA S1 Modem Port in use

  Hello

  I have a Tecra S1 with WIFI and built into the Toshiba Bluetooth module.

  I can't use my modem after you install the bluetooth module. The bluetooth module works very well, and I can communicate with bluetooth devices. It seems to use "virtual" com ports to communicate with bluetooth devices. He created virtual comm 255 com com ports 5 (I think).

  But, the modem no longer works. When I go into the properties page for the modem (which reported no problem) I can't question the modem - it says that the com port (com 3) is in use by another application - even if I re - assign the modem to a different port, I get the same error message. I am running XP Pro SP 2.

  I'd like to be able to solve this problem. I had this problem for about 6 months. Apart from that, my laptop works really well and I'm really happy with it.

  Has anyone else seen this problem and fixed it? I would be very happy for any help. I hope I don't have to re - install everything that, as my laptop is a development computer (ram of 1 GB!) with Visual Studio 2003 is installed, SQL server, Dreamweaver etc... It will take a week for all installed again!

  But I have a new (empty) 80 GB hard drive, so I could build a fresh install of XP Pro on the new drive for a test... Any help VERY welcome!

  Concerning

  Mark Wills
  UK

  Hi Mark

  In my opinion the first step you should try is to remove the modem from Device Manager, then restart the device. After that, the modem must be recognized again and installed correctly. Also remove your dial-up connection and set it up again.

  It's great that you have another HARD disk. You can do some experiments and try to find out what may be the problem.

• Error modem already in use or is not configured properly

  Original title: try to use the modem internet cleartalk on laptop

  Downloaded there screen says.  but when I try to connect it gives me an error that it is already in use or is not configured correctly. It is of ClearTalk EVDO Mobile Broadband

  Hello

  1. If it works well before?

  2. what version of Modem drivers do you use?

  3. What is the model number of your computer modem?

  4. do you have other devices connected to the computer?

  The error you receive is typical of drivers who don't are incorrect or not installed. You run the system with UAC turned?

  I recommend you to connect the modem to another computer that is running Windows Vista and check if it detects there. If it does not work on another computer also, then the problem is with the modem and I would ask you to contact the manufacturer of the modem for any further assistance.

  You can also try the following methods and check if it helps.

  Method 1:
  To resolve this problem, remove the modem, and then restart the computer. When the computer restarts, Windows detects the modem and attempts to install the driver appropriate for that. To do this, follow these steps:
  a. log in the computer as an administrator or as a member of the Administrators group.
  b. click Start and then click Control Panel.
  c. double-click phone and Modem Options.
  d. click the Modems tab.
  e. in the following modems are installed list, click the modem that you want to delete and then click Delete .
  f. click Yes in response to the ""are you sure you want to remove the modem selected from your system? " " message.
  g. restart the computer.
  h. the found new hardware wizard starts. Follow the instructions in the wizard to reinstall the modem.

  Method 2:
  You can re-install the modem driver on the manufacturer's Web site and check.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Reference:--

  Solve the problems associated with the modem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-modem-problems

• net.rim.device.api.io.IOPortAlreadyBoundException: SMS port already in use.

  It's strange, the code works fine on j2me, but it does not work on Blackberry. I'm testing with Blackberry 9000 V4.6 emulator. He throws net.rim.device.api.io.IOPortAlreadyBoundException: SMS port already in use. when I try to open a connection.

  The line below throws the exception:

  MC MessageConnection = (MessageConnection) Connector.open (connection);

  It seems that the port is already open, but I don't know that I finally closed the connection by exiting the application.

  The link below gives me a great help:

  http://supportforums.BlackBerry.com/T5/Java-development/SMS-MessageConnection/m-p/63975#M7177

• Port already in use exception...

  Hello

  Being a beginner in blackberry I have some problems while developing Java applications for blackberry. I am developing CLDC application that receives SMS on perticular port in a background thread. But when I sent sms to my application using this perticular port, I got "Port already in use exception." What could be the problem. ?

  Code shown below...

  Builder includes:

  try {}
  incomingConnection = (DatagramConnection)Connector.open("sms://:7878");
             
  } catch (Exception e) {}
  Dialog.Alert ("problem with port" + e);

  Thread contains:

  While (true) {}
  try {}
  Datagram sms = incomingConnection.newDatagram (incomingConnection.getMaximumLength ());
  incomingConnection.receive (sms);
  payload of Byte [] = sms.getData ();
  } catch (Exception e) {}

  }

  Thank you

  Pritesh

  Hi pritesh_bb,

  Well understood, the error itself would mean that another application has already got hold of this port, and as explained it is first come first served. As such, you will be able to return to the port, unless you uninstall the other application. Would it be possible for you to change the port number? Perhaps 9189 or similar?

  Concerning

• SMS port already in use... MessageConnection using connector.open

  I created an application that listens for incoming txt messages and it works very well on all devices except the 8330... works of ideal app on all phones on sms listening but on the 8330 I get the problem where the exception says "port already in use"... my application is currently in beta and a user reported he was continues smart guard... as soon as he took the chip guard the app works perfectly... so im guessing as smart guard uses sms messages to intitate itself is what is the origin of the port problem... is there anyway around this? my code is below...

  public void open()
      {
          this.controller.write("Attempting to open message connection (Message tracker)");
          try {
              this.msgconnection=(MessageConnection)Connector.open("sms://:0");
          } catch (IOException e) {
              this.controller.writeToConsole("Error opening message Connection (MessageTracker) "+e.getMessage());
          }
          try {
              if(this.msgconnection!=null)
              {
              this.msgconnection.setMessageListener(this);
              }
          } catch (Exception e) {
              this.controller.writeToConsole("Error adding messagelistner (MessageTracker) "+e.getMessage());
          }
      }
  

  MessageConnection is pretty useless, since only one application can attach to the SMS port at a time.

  My advice is to switch to use the method of datagram.

  See this article:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...

• want to connect Apple TV but HDMI port is already in use.  Y at - it a triangle connector I can buy or?

  want to connect Apple TV but HDMI port is already in use.  Y at - it a triangle connector I can buy or?

  Sorry but no.

  Apple TV requires an HDMI cable and a HDMI port.

• Satellite A30 Com3 (modem port) does not

  My port Com3, such as used by Toshiba softmodem, is nowhere to be seen, is not listed in device drivers and cannot be recognized by hyperterminal. There is an entry in the hidden device drivers where it was yellow triangular. I disabled it, but he wouldn't reactivate. There are entries in the registry for it. I've updated the BIOS.

  If I try the softmodem I get message 633 port already in use or not properly configured. My suspicion is that the port was blown by power surge on the phone line. Anyway I can test it before sliding off the coast on a service partner? Thank you

  Hello

  Check the documents of Microsoft:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;324760
  http://support.Microsoft.com/default.aspx?scid=http://support.Microsoft.com:80/support/kb/articles/q191/4/44.asp&NoWebContent=1

  Maybe you will find useful information here.

  Good bye

• No port COM - A30

  Due to an overheating problem, I reinstalled Windows XP. The Device manager now showes no port COM and the toshiba software modem give an error message when I try to use it. Please help;

  Hello

  Usually after the form of the installation of the recovery CD should all work properly.
  But if you have installed the Windows from the CD from Microsoft if you need to install Toshiba stuff (drivers, tools) in the right order.
  It is very important that you will install the Chipset utility, cardbus driver initially.
  Check:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

• "Impossible to copy the requested resource is already in use" error message when you try to move the file to the thumb drive.

  I'm going to try really hard to do this makes sense, but I don't know much about computers.  Bear with me.

  Brother gave me a computer.  A graphics Nvidia GeForce 9800 inside.  Because it restored the system settings, the drivers are missing.  Can not connect this computer to the internet.

  So, I went to the nvidia site and downloaded the necessary drivers on my OTHER computer, which is what I'm now on the right.  The download ends, and when I try to move the (drivers) file in the USB, I get this delicious "cannot copy xxxx that the requested resource is already in use".  It is not in use.  I can't even use it on this computer as its pilots for a graphics card that is not yet part of this computer.

  What should I do to make sure I put the file with the drivers on a USB key, on the port to the other computer.

  (by the way, this also occurs with a few random mp3s of the mine.  10 of the 12 tracks on a CD, for example, does copy on the USB no problem, but then two of them to come up with the error message, for no apparent reason.  Don't know if it's relevant)

  Try another USB key. That one is may be damaged or failing. In the meantime, to burn the drivers on a CD - R disc (not CD - RW) to take the target machine. MS - MVP - Elephant Boy computers - don't panic!

• Ports (COM & LPT) does not not code 10

  Hello, im trying to COM with my PC and the mobile phone using J2ME and J2SE, but when I ask for the COM windos anything happen I check the Device Manager and the Ports (COM & LPT) wasn't there, so use the Action menu select Add legacy hardware.
  
  After installation I get the exclamation "Warning" Code 34 and the following comment "Windows cannot determine the settings for this device.
  So I use this tutorial "http://lifewithdotnet.blogspot.com/2012/02/how-to-add-physical-serial-port.html" for the configuration manually.
  Now I have another exclamation Point "Warning" Code 10 of the commentary 'this device cannot start' I have tried to disable then enable the component nothing happen.
  Looking for an update of the component said that its already been updated.
  How can I fix this error?
  PS actually the USB ports work! If I connect a printer USB Flash drive, IPOD, even my work cell fine sound when im trying to get an answer for java that the list of ports is delivered empty, I tried the java SE & ME in the other laptop and it works so I don't think its java.
  I use a Dell M5040 with AMD processor C - 60 Service Pack 1 of Windows 7 Starter.
  I/O 03F8 - 03FF used by: Bus PCI which is not job icon
  IRQ 0 x 00000004 (04) used by: ACPI x 86 computer that isn't job icon.
   

  Hi Charlie,

  In order to change the hardware parameters, you should contact your hardware vendor. Microsoft will not be able to help you change the hardware settings.