Modem problem: "no dial tone".

Similar Questions

• Satellite A200 - modem reports no dial tone

  My internal modem reports no dial tone, but the line does not operate normally.
  In the control panel it says modem is not functioning normally.
  It worked last week and now suddenly stopped.

  Murray

  Have you tried to disable the option "wait for the tone modem"?

  Also try reinstalling the driver for the modem.

  Or maybe the modem fails due to a lightning strike or something.

• Dial-up modem works for a short time, then he said "no dial tone".

  original title: Dial-up modem works for a short time, then he said "no dial tone" does not matter if the modem is to maintain or external. The same thing happens

  Living in an area where the wireless, wifi, broadband is not available, only wheel upwards. Modems worked well for a time, then more nothing. Use xp pro on a Dell computer

  Hello

  1. your phone work when modem says no dial tone?

  2. you have made no changes to the computer before the broadcast took place?

  3. What is the number of brand and model of Modem device?

  Follow the methods mentioned below:

  Method 1:

  Step 1: Run modem diagnostics .

  Note To follow these steps, use the default view of 'Category' in the control panel instead of the "Classic" view

  1. quit all programs, and then close all open windows.

  2 click Startand then click Control Panel.

  3 click on Printers and other devices. Click phone and Modem Options. Click the Modems tab.

  4 select the modem for which you want to run diagnostics on the modem. If you are unsure what modem to select, contact the manufacturer of your computer.

  5 click Properties. Click on the tab Modem Set the Maximum Port speed to 57600.

  6 click the Diagnostics tab.

  7 click Query Modem. If the modem answers and functioning, the information about the modem appears.

  Step 2: Run the Network Diagnostics.

  Network Diagnostics for Windows XP is available to help identify and fix network connection problems

  http://support.Microsoft.com/kb/914440

   

  Method 2:

  How to troubleshoot "No dial tone" issues in Windows XP

  http://support.Microsoft.com/kb/326681

   

  I hope that helps!

• Satellite A10: Modem - no dial tone error 680.

  Hello

  Seems to be a common problem search the ends of the net even if I have to find a solution.
  No dial tone error 680. Satellite A10 running Windows XP SP2.
  Interviewed modem-It's ok.
  Check wait for the tone. still not connect.
  Have tried different telephone cable, ISP, reinstall the drivers, control of the region (UK).
  Check the malware, corruption of the registry. Nothing there.
  Reinstalled from the Toshiba restore CD. Still the same problem.
  The BONES of config system permit
  Check for driver updates. None.

  Manage devices only show and COM ports if Port Modem Properties settings show that it is at COM3. have tried to change to COM4 - makes no difference.

  What is the solution?

  Hello

  This error almost always occurs because the computer cannot hear regular ringing when it picks up the phone line to dial through the modem.
  Unfortunately, there is no standard solution for this problem.
  Did you check that the modem is plugged into a phone point in the wall?

  In addition, check out this site for information:

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;326681&product=winxp
  http://support.GCI.NET/KB/kb74
  http://support.earthlink.NET/Mu/1/PSC/IMG/walkthroughs/windows_9x_nt/dialers/dun_1.3/2267.PSC.html
  http://www.Xtra.co.nz/help/0, 6156-1296801, 00.html

  Good luck

  Good bye

• Dial tone not detected on Modem Compaq Presario CQ61 - VM367UA product #ABA - Model CQ61-313US

  I have a modem which does not detect the dial tone. The modem, I replaced it with a new one and I still get the same message. I also reinstalled the driver, nothing helps. Do you know what anyone else I could try to solve the problem?

  The rest of the machine works fine. (Wireless / network Jack / etc)

  Thanks for any help you can provide.

  -TimJ

  If you had replaced the modem and reinstalled him his drivers, then you should check if the telephone cable and its connection.

• Modem not able to dial tone use portable US in Greece

  I bought the laptop from USA and I led her to the Greece, but when I try to log in I hear the dial tone, but the is not able to have the tone. I identify the location for the Greece.

  I have windows vista.
  In the laptop manual writes only: connect the built in modem only telephone lines analog ordinary not online (PBX) or digital (ISDN)

  My line is to the PSTN of OTE. Someone help me?

  Hello

  Unfortunately I have m no expert on this subject, but according to an article in Internet the PSTN Public Switched Telephone Network is an old international telephone system, that supports analog transmission via copper cable.

  I think that the modem should work.
  First, you must remove the modem driver and remove the modem region Select profile.
  Then download the driver of modem for the Greece and create and configure the new profile in the utility region modem selection.
  That I me remember this utility is located in the folder Toshiba-> network-> Modem region select.

  Good luck

• Satellite Pro 6100 Modem does not - No Dial Tone

  Hello

  I'm in terrible trouble. I have a big meeting Friday and discovered that the internal modem on my Satellite Pro 6100 does not work. I downloaded the drivers of software Modem since the support site, and the installation seemed to go OK. There are no conflicts listed in the Device Manager, and when I query the modem to in the properties of the modem (from the control panel), it seems question OK too, but...

  HE DIDN'T THERE WAS NO DIAL TONE!

  I don't know that it is connected to my phone OK. Instead of a tone, I hear a loud hum, with a series of clicks. I can't hear being composed either DTMF tones, even when I disable "wait for dial tone. This behavior is the same if the modem is connected to the phone line.

  I have a big rally Friday and will need this modem to work... any help would be much appreciated...

  Thank you

  Matt.

  Hello
  that doesn't sound so good!

  The measure where I read that your ad you´ve checked your system almost all.

  Right on the thing, have you installed a firewall or other programs to check system that denied access to the modem?

  It is also ok, you should let check your laptop on a faulty Modem.

  Good bye

• Satellite L20: Modem does not get dial tone

  Hello

  My L20 specifications is not a tone whem I'm composing upward. On another pc, the connection works well, so I don't know that the line has a dial tone and the other computer is "listening".

  I also tried to uncheck the option "wait before the tone", tried to remove it from the Manager of devices, but after this all the modem still does not work. The current driver that is installed is version 7.20.00.00, because I can not install the latest version (7.25.00.00) (installation program does not end well, no specific error is given).

  Someone knows what to do?

  Open the system control panel, and then choose the phone and modem options.
  He check on the Modems tab. The modem should be placed in the list.
  If this isn't the case, then you must install the modem driver.
  Check the Modem function by pressing the 'button interrogate Modem.
  If the information window about the Modem contains a list of COMMANDS (including ATI2, ATI3, ATI4 etc.), then the modem is installed correctly. The ATI5 command ends with the number for the parameters selected regional (for example Germany = 06).

  To change the regional setting please use the Toshiba Internal Modem region Select utility.

• Satellite A30: Software Modem - no dial tone

  I reinstalled XP English on a machine bought in Spain.
  The modem has no link as all - no dial tone can be heard.
  I have installed the latest drivers, cables everything is OK. Phone line œuvres
  The modem seeks COM3 but there is no COM port in Device Manager.

  Hello

  I put t think that this issue has something to do with the COM ports. The com port is a virtual port.
  You should be sure that you have installed a modem for form Spain from Toshiba Web site driver driver.
  Secondly, please go to the modem properties, click the modem tab and disable the option to wait for the tone before dialing

• Satellite P20-304 P43: [b] internal modem problem! [/ b]

  Hi guys,.

  When I click on my connection I see this message: "Error 633...". etc ". I click redial but Error 633is still there and I can not be connected to the web. I checked in my device manager and on the general tab, I read: "this device is working properly." but sometimes (when I face the Error 633) when I click the query modem and it does not show me any Info for my modem...» What could I do?

  Hi George,.

  I suggest you to install the modem again with a small manual! I had found this one here I have the forum!

  1. check if the modem is entered in the Device Manager
  2. check if the modem is configured and that it works?
  The Control Panel must be open and go to the phone
  options of modems and. It should be your modem!
  If it is not shown to you, then you must install the
  modem driver.
  3. double-click on modem and go to the Diagnostics. The
  modem query button queries the commandments with
  check the return signal. This will give you some additional information
  the modem works properly.
  4. then set up a standard dial-up connection to your
  provider of
  5. go in the properties of the modem (Device Manager) and the
  Check the brand in the "wait for dial tone before dialing" has NO
  been resolved!

  Bye Bob

• Tecra A6: no dial tone with Replicator port when the phone line is plugin

  Hello

  I have a Tecra A6 and the Advanced Port Replicator 3 Plus. Everything works except that I can't get a dial tone (for fax) when I plug the phone line into the duplicator. However, if I plug the same line to the Jack on the Tecra, I get a dial tone.

  I suspect that the com port is not configured correctly. Toshiba software modem is set to 3 Com (which should be of the Tecra). Should this com port I choose for the Port Replicator?

  Hello

  Thanks for the info. I also think that the laptop was not properly connected to the port replicator. It is important that the laptop is connected correctly to the port replicator.
  Further, you should check if you have a new version of the Extention3 of Mobile of TOSHIBA (TME3) installed on the laptop.

• Faxing documents, but LAN charger works fax fails with an error "no dial tone".

  I have a HP Photosmart C7280 on my local Wi - Fi network.

  On the local network, I can print from my Mac (OS X Lion mountain) without problem.

  I can scan on the LAN from my Mac without problem.

  I can send and receive faxes on the printer itself without problem.

  But when I try to fax a document from my Mac on the local network by 'printing' for HP Fax I get an error 'no dial tone '. I know that the document is to achieve the C7280 because the phone number that I'm trying to fax to appears on the front panel. I know that there is no problem with the phone line because I can go to the machine and send and receive faxes. If the error 'no dial tone' is meaningless to me.

  Any ideas?

  I should mention that the phone number appears on the front panel as 1W8005551234 (I substitute a fake phone number, of course). I get the 1 prefix of composition in the dialog box print, as well as the phone number to ten digits in the number field. I guess that the printer driver is inserting the W as a code of 'pause', although no break is really necessary.

  Abandoned by my friend yesterday, and his printer had gone off the deep end. Printing gave only blank pages, although it sounded as if the printhead has been dithering away normally. Tried to copy something, with the same result. Has been through the usual list of troubleshooting and eventually got to cyclical food printer, which restored things to normal.

  So was the "no dial tone" error just an early symptom of a bigger problem pre-existing, or doesn't have the W in the connection string in my attempt at beginning of something through the Insider LAN fax corruption, or have the problem of fax and printing and copy problem unrelated to later?

  Who knows?

  Anyway, once the print worked again once I tried something fax on the local network of the Mac for the HP Faxback number, this time put the 1 in the phone number field of the dialog box print, rather than in the prefix field of numbering, and everything worked.

  If life is good.

• Whenever I try to send a fax, I get error "no dial tone was detected. The telephone line is busy or not connected to the computer. »

  Whenever I try to send a fax, I get: "no dial tone was detected. The telephone line is busy or not connected to the computer. "Any ideas?

  You can't send a FAX via a connection to broadband. Fax is essentially specialized phones and requires that a service composition is used at BOTH ends.

  You can buy an analogue Fax/modem (USB types work well enough) or use a service to convert fax email...

• Setting dial-up Modem problem

  I installed a 56 K PCI Faxmodem and am on dial-up, it says com12 that my dial-up service says it must be a com 3 How can I change it?

  Hello

  Unless you use a communication software that was provided by the service to access remotely and has been designed to work specifically with COM3 it shjould not matter.

  The number of COM is selected by the operating system according to availability, it could be that COM3 is already active. Boot into the BIOS and check if COM3 is affected.

  Jack, MVP - networking.

• Satellite L300 - 1 year PSLBGE - device Modem problem

  Hey

  I try me set up my dial-up access, so I can use internet at home...
  It is said that any modem devices are
  but in the previous copy of windows that I had... everything was fine.
  would u please help me solve this problem?

  Portable computer system unit Toshiba satellite L300 1 year
  Model No.: PSLBGE-002004AR
  OS: Windows XP
  Note: I went on the site of toshiba drivers and I downloaded 3 files of modems here to try to update the modem driver
  but nothing helps and the problem persists
  Thanks for reading
  Your
  ~ Nour

  I guess that you have activated the Device Manager and there is no yellow exclamation point isn't good?
  Figure modem in the list?
  It should be!

  How have you tried to configure the dial-up access?
  You should do this;
  Go to the category modems Options - Control Panel - hardware and sound - and.
  In the local info window, select an area code; for example, 0.
  Then click the Modems tab, click Add.
  If a User Account Control warning window appears, click on continue, and then click Next.
  Now Windows Vista should attempt to detect the modem.
  When the modem installation is complete, click Finish.

  Then the new modem installed should appear. Click OK to close the Options of Modem and telephony.
  Now, your modem is installed correctly, and you must now create a modem connection.