Windows 8 USB Bootable Disk

Similar Questions

• How to create a Windows XP USB Bootable Disk with file .iso Windows?

  I have a notebook without DVD ROM. I have to restart my notebook with usb drive. I don't know how to make my empty usb drive bootable. I already have an .iso windows image file?

  See: make Bootable to Windows XP CD install updated with SP3

• Already have a bootable Windows 10 USB, can I use it with Bootcamp?

  Already have a Windows 10 USB bootable. I converted to an ISO using an Apple Guide file. Bootcamp says:

  In addition, on Bootcamp it shows Windows 7 or later version instead of Windows 8 or later.

  1. Please make sure that your USB Installer is not an installer 32-bit/64-bit mixed. If it is greater than 4 GB, it's a mixed Installer.

  2. Please download an ISO 64-bit of the https://www.microsoft.com/en-us/software-download/home for your desired version of Windows. You may need your product key for Windows 7.

  For Windows 10, MD5sum values

  OpenSSL md5 Win10_1511_English_x64.iso

  MD5 (Win10_1511_English_x64. ISO) = a0d4271b7537732a060909fd39d54829

  OpenSSL md5 Win10_English_x64.iso

  MD5 (Win10_English_x64. ISO) = 23e397a21a9e01f141c64b7e1260314a

• How to create a bootable Windows Vista USB drive? I can't install Windows Vista with a disk because my dvd drive does not work.

  I have install vista and I want to convey in the USB key... because my dvd drive does not work... Please tell me what I need to do

  Please send your reply to my email id, or post it here...

  Hello

  Vista is not designed to be installed like this.

  But others led to ways to do so.

  This may interest you on this subject:

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  Google will help you in this matter.

   

  See you soon.

• How to format my USB after making it bootable with Windows 7 USB/DVD Download Tool

  I used the Windows 7 USB/DVD download tool to make my bootable usb key. But now I can't format it. When I open my computer and connect my USB it is shown as a cd. Also when I go into disk management it is shown that two disks hard each of them Go 99,76 and a CD-ROM that has 1123,13 GB RAW. I've tried a few programs for formatting, but they say that it is protected against copying. Is it possible that I can use as a normal USB again?
  Thank you very muck for your help.

  Hi mifocc,

  ·         What is the brand and model of the USB?

  Check if there is no slide switch on the side that provides protection against Scripture. This spectacle of a lock closed and open on each side.

  I suggest you follow these steps.

  (1) Insert the USB key into the USB port.

  2) click Start, type devmgmt.msc in the search text box and press ENTER.

  (3) find hard drives and expand it.

  (4) find the USB flash drive you want to format, and then double-click it. He opens the Properties dialog box.

  5) click on the policies tab.

  (6) the default option optimize for quick removal of the selected options, put it to optimize for performance, and then press OK.

  (7) now, open computer. Right click on the USB Flash drive and select format. The Format dialog box will now appear.

  (8) in the file system field, select NTFS.

  9) Press Start and wait while the process will be completed.

  You can also connect the USB on a different computer and try formatting.

• Can I create a recovery bootable USB through disk utility?

  My HARD drive is dying, I can't access my Macintosh HD partition anymore and I can't reinstall OS because I SMART errors. Before the format and reinstall the attempt to load slow my computer, random errors, etc. So I definitely think that the HARD drive is near death. My plan is to replace my HDD for a Virgin SSD, I perform this task several times on computers of the victory but for MAC, I wonder how I will load the new OS. Can I make a bootable USB with the recovery partition, but on a USB key tools? Unofrtunately I have more available Mac to create the USB bootable through itunes.

  My computer is the MacBook Pro (13-inch mid 2010), I have also all original packaging somewhere, if there is a CD that I can use, I certainly can get too.

  Any advice?

  Thank you!

  Apple have this to do a USB installation...

  Create an installer for OS X - Apple support bootable

  Another option is to use the diskmakerx.com application

  You must have the OS installer downloaded to make these methods of work is probably not practice on your failed drive.

  Both of these options are to run a 'normal' operating system too. The recovery partition is not 'normal '.

  Another option is to use the Internet recovery mode if your Mac supports...

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  On macOS recovery - Apple Support

  Use wired ethernet for best results, since it will download a bootable OS & then download the installer of the OS also.

  I suspect you have the update of the firmware installed to add this feature if it has been updated over the last 3 years

  You may be able to generate a score of alternative recovery to another disk (such as a USB key) If you want to just "compensation of base OS.

  OS X: on Recovery Disk Wizard - Apple Support

  A last solution would be to clone your drive failing on an external drive (or use the new SSD in a proper case). That can be done in the modes of recovery via disk utility. Basically, you use a feature to "restore" to clone one volume to another. (I don't see clear instructions for the moment so ask if you want to pursue this option).

• Drivers of Windows XP SATA USB bootable does not configure z500

  Hi all

  I have a lenovo z500 and windows 10 on it. I tried to install the second OS - Windows XP, but not much success. When I plugin a USB Bootable XP laptop recognizes it. When I restart the computer laptop and put in place the first boot to the USB device and save the changes with restarting computer F10 and I expect to read first of all of the USB, but it's, it's like it's completely skip the USB and Windows 10 to start as usual. Do you have advice on this? I tried all the different ports and 3 flash drives, I tried Windows 7 and 8, they work, but it does not work for XP.

  Any help wil greatly appreciated.

  krasioboy wrote:

  Hi all

  I have a lenovo z500 and windows 10 on it. I tried to install the second OS - Windows XP, but not much success. When I plugin a USB Bootable XP laptop recognizes it. When I restart the computer laptop and put in place the first boot to the USB device and save the changes with restarting computer F10 and I expect to read first of all of the USB, but it's, it's like it's completely skip the USB and Windows 10 to start as usual. Do you have advice on this? I tried all the different ports and 3 flash drives, I tried Windows 7 and 8, they work, but it does not work for XP.

  Any help wil greatly appreciated.

  You may not be able to start the XP Installer since the machine is new. Go around it and achieve your plan running XP, you can run it by using a virtual machine like VirtualBox. See this video on how to do in this regard.

• Start of the external (USB) HARD disk Windows

  Dear apple supports,

  I have install Windows 10 external HARD disk and connect with my Mac by USB. When I select the system startup on boot disk is windows 10. I got a message "you cannot change the diskette on the selected disk. The bless tool was unable to put the current startup disk. »

  How can I start windows from disk external HARD on my Mac (MacBook Pro (retina, 13-inch, early 2015), OS X EL Capitan v10.11.1)

  There are two ways to install Windows on your MacBook Pro. You can use the Boot Camp Assistant, located here details: http://www.apple.com/support/bootcamp/ or you can use a virtual machine, Parallels, Fusion or VirtualBox. Details are found on their respective sites.

• Windows 7 USB Flash drive - if I click on Scan and difficulty after you insert the disk, it erases my files

  Original title: Windows 7 USB/Flash drive problems

  In Windows 7, if I plug in my USB drive, the message box appears titled ' do you want to scan and difficulty of removable disk (e :))?»  If I click on Scan and Fix, he deletes my files (or so I thought).  I hope that the files are still there and I have simply can't see because the drive is FAT32 and not NTFS (it says that most of the drive is NOT of free space, so I assume that the files are still there).  What should I do to see / access files?

  Note: A reader, I never selected "Scan and repair"... so I can still see/access files.
  On the other drive, however, the first time I plugged it on Windows 7, I clicked Scan and Fix and it erased all the files on this drive (I guess).  This of course got me very angry.

  Hi MichaelGramm,

  It seems that the file format has been corrupted. You might consider formatting the drive in NTFS file system and check if this solves the problem. For Windows 7, the best choice for hard disks is NTFS.

  Note: Make sure that you back up the data before formatting the disk.

  See these articles for more information on formatting disks and flash player:

  Create and format a hard disk partition

  http://Windows.Microsoft.com/en-us/Windows7/create-and-format-a-hard-disk-partition

   

  Formatting disks and drives: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

   

  Caution:

  Formatting erases all existing files on a flash drive. If you format a flash disk that has files on it, the files will be deleted.

  Hope this information helps.

• How to make a USB bootable windows 7 or windows xp or any other

  How to make a USB bootable windows 7 or windows xp or any other

  tajamulfayaz

  The link below is a tool that will use a Windows ISO file and make a USB bootable for you.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

• Files do not automatically load on USB bootable windows 7.

  Original title: Windows 7 usb problem.

  I prepare the USB bootable windows 7 when I pluged in the usb (press any key to continue) do not come and the files load automatically?

  Hello

  Have you changed the boot order to be able to boot from USB?

  • When ready to install Windows 7 from USB key:
    • Connect the USB.
    • Restart the computer and continue to touch the F button (see screenshot below) Manager to open the screen Menu starting for the brand and the model of your motherboard or your computer until it does.
      • 
    • Select the USB stick to boot from.
    • Start the installation of Windows 7.

  And that's how you did your USB key?

  You download the correct ISO file and make your own drive and use the product key located on the COA sticker. Download the correct ISO file and make your own drive and use the product key located on the COA sticker.

  http://www.w7forums.com/threads/official-Windows-7-SP1-ISO-image-downloads.12325/page-2#post-124821

  Using the method of USB in conjunction with the Windows 7 download preceding:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  "How to get and use the Windows 7 USB/DVD Download Tool"

  http://www.SevenForums.com/tutorials/31541-Windows-7-USB-DVD-download-tool.html

  See you soon.

• I need to make a usb bootable for windows 8.

  Bootsect.exe

  I can't download the bootsect.exe from the store.  Only get the file iso32 integer or an image file or download... Manager what is the problem?  I need to make a usb bootable for windows 8.  I am running windows 7 32 bit.  What's wrong with the instructions for download

  Go to the Microsoft Store website, sign in with your bank account, select Download Options and select Windows 7 64 bit and proceed to download.

  1. connect to your Microsoft Store account to view your purchase history

  2. search for your purchase of Windows 7.

  3. next to Windows 7, there is a drop-down list "additional download options.

  4. in the drop-down menu, select "32-bit ISO."

  5. right click on the link and then save the bootsect.exe file to the location where you installed the Windows 7 USB/DVD Download Tool (for example C:\Users\username\AppData\Local\Apps\Windows 7 USB DVD Download Tool).

  6. once the file has been saved, return to the Windows 7 USB/DVD Download tool to create your bootable USB device.

  or

  (1) download and install the Windows 7 USB/DVD Download Tool program, as described on the Microsoft Store website.

  (2) download a 32-bit version of bootsect.exe work. Here is a link to the 32 bit bootsect.exe:
  http://www.SevenForums.com/attachments/installation-setup/47060d1263222191-32-bit-Bootsect-bootsect7600x86.zip
  From: http://www.sevenforums.com/installation-setup/54443-32-bit-bootsect.html

  (3) once downloaded, copy the BootSect.exe file in the same folder that contains the file Windows7-USB-DVD-Download - Tool.exe installed. This file in Windows Vista's default installation directory is C:\Users\USERNAME\AppData\Local\Apps\Windows 7 USB DVD Download Tool\ (you need to look in XP)

  (4) application of the Windows 7 USB/DVD download tool as indicated on the web site of Microsoft Store. The end result will give you a boot USB flash drive that contains everything you need to install the 64 bit version of Windows 7.

• I m ussing Windows 7 x 64 and I got the error of bootsect making USB bootable Windows 7 x 64

  Hi, I had a problem of decisions and windows 7 x 64 bootable usb, I use Windows 7 USB/DVD tool and I use Windows 7 x 64, but when I use the software I have the rare and the bootsect error is that I use Windows 7 x 64.

  I have download the bootsect.exe file and the problem is solved, but which does not happened before.

  I appreciate the help in this question I have.

  Sorry for my English

  Hi Erick,.

  You can read these articles and check if this helps you to learn more.

  How do I create a bootable usb drive with an iso image of Windows 7?: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/how-do-i-create-a-bootable-usb-drive-with-an-iso/50b34677-8584-47da-a05d-59c182eeb7a2?msgId=f05e8eb1-2af0-4e16-9e7a-70557b046dee

  How can I make a bootable Windows 7 flash drive usb? : http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/how-do-i-make-a-bootable-windows-7-usb-flash-drive/24f499cc-7735-44d8-a8fa-324c13077977

  Bootsec errors when configuring a bootable usb key: http://social.technet.microsoft.com/Forums/en-US/W8ITProPreRel/thread/eaef2ea4-306f-4c8e-adf0-ac285e341b9b/

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• I created the USB bootable windows 7, but its not start...

  Help me please you very soon,

  I'm waiting for all and very valuable answers...

  You wrote before you set the BIOS to boot from the DVD & USB before the hard drive.  That's why he doesn't want - it should just start from them.  As you say that it begins just Windows, then it does not detect the existence of the bootable USB key.

  These are the controls, I think you should do:

  [Do not use cables of USB extension for these tests as they can distort the results.  Connect the USB key directly into the PC].

  1 check the boot settings, that you saved in your BIOS - check you have to boot from USB as the first element in the list.

  2 while under Windows, check in Control Panel, Manager of devices for possible errors in all USB devices [but error checking in all devices while you're there].  Connect the USB bootable for this audit.

  3 look at the contents of memory in Windows explorer.  You will need to set it to show hidden files & show system files [alt, t then folder options, display], I'm not sure.  The unit should have something like this [the list is for my Home Premium x 64 then there might be some variations; mine is a total of 3.3 GB]:

  files
  Autorun.inf
  Bootmgr
  Bootmgr.EFI
  Setup.exe

  records
  boot
  EFI
  sources
  support
  upgrade

  4. do you have bootable USB sticks [any DVD] that you can use to test whether the system or the Win7 USB installation that is causing the problem?

  5 look in the manual of your PC for the key you need to get to the menu "start options".  Andre says above, it is often F12 but not always – only the manual of your PC or the PC manufacturers site can tell you.  Put the USB then restart and, as soon as appears the logo of the manufacturer of the computer, press this button.  It will show you a menu short that lists devices that the system can boot from.  If your USB drive is not on the list then the system does not recognize that there is a bootable USB device.

• USB bootable Windows 8 Pro key

  Hi I upgraded to Windows 7 Windows 8 Pro.

  But after everything, I noticed there was a lot of files and programs that I wanted to get rid of so I decided to install a copy clean od Windows 8 Pro and format my hard drive. How to create a USB bootable Windows 8 Pro copy?
  Thank you

  See here:

  Create your own:

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  then:

  http://techingiteasy.WordPress.com/2012/11/07/part-2-How-to-upgrade-using-the-Windows-8-Upgrade-Assistant/