Satellite A200 - modem reports no dial tone

Similar Questions

• Modem problem: "no dial tone".

  Hi all

  Can someone explain how to get my email from my lap top messages when away on holiday (in the United Kingdom)? At home I'm on freeserve hometime - evenings and week ends option. While he died this week, I tried to connect through aol broadband, when it obviously failed I have not connected to the telephone without broadband dsl thingy, I always get the error message 'no dial tone '. If anyone has had this problem and you solve?
  Thanks, Jackie

  Sorry, but I can´t follow you! ;(

  Want to know if you can take your vacation mail, for example in Webmail or something else.

  Or do you have the probs to get your Modem running?

• Satellite A200: Modem has an error 633: already in use or is not configured properly

  My laptop is A200-FE0.

  When I tried to make a dial-up connection, there is a window of error says:
  "Error 633: the modem (or other connecting device) is already in use or is.
  not configured correctly.

  When I test my modem by clicking the modem of the request under the Diagnostics tab in the modems tool of the
  The modem control panel, normally responds and seem to work
  correctly.

  When I test my modem using Toshiba diagnostic tools, it displays "pass" and I canhear the tone Dáil too.

  I tired to edition and reinstall the driver twice.
  But I can't make a dial-up connection and get error 633. I'm really upset about it.

  Please help me! Thank you very much!

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=27402

• Dial-up modem works for a short time, then he said "no dial tone".

  original title: Dial-up modem works for a short time, then he said "no dial tone" does not matter if the modem is to maintain or external. The same thing happens

  Living in an area where the wireless, wifi, broadband is not available, only wheel upwards. Modems worked well for a time, then more nothing. Use xp pro on a Dell computer

  Hello

  1. your phone work when modem says no dial tone?

  2. you have made no changes to the computer before the broadcast took place?

  3. What is the number of brand and model of Modem device?

  Follow the methods mentioned below:

  Method 1:

  Step 1: Run modem diagnostics .

  Note To follow these steps, use the default view of 'Category' in the control panel instead of the "Classic" view

  1. quit all programs, and then close all open windows.

  2 click Startand then click Control Panel.

  3 click on Printers and other devices. Click phone and Modem Options. Click the Modems tab.

  4 select the modem for which you want to run diagnostics on the modem. If you are unsure what modem to select, contact the manufacturer of your computer.

  5 click Properties. Click on the tab Modem Set the Maximum Port speed to 57600.

  6 click the Diagnostics tab.

  7 click Query Modem. If the modem answers and functioning, the information about the modem appears.

  Step 2: Run the Network Diagnostics.

  Network Diagnostics for Windows XP is available to help identify and fix network connection problems

  http://support.Microsoft.com/kb/914440

   

  Method 2:

  How to troubleshoot "No dial tone" issues in Windows XP

  http://support.Microsoft.com/kb/326681

   

  I hope that helps!

• Satellite Pro 6100 Modem does not - No Dial Tone

  Hello

  I'm in terrible trouble. I have a big meeting Friday and discovered that the internal modem on my Satellite Pro 6100 does not work. I downloaded the drivers of software Modem since the support site, and the installation seemed to go OK. There are no conflicts listed in the Device Manager, and when I query the modem to in the properties of the modem (from the control panel), it seems question OK too, but...

  HE DIDN'T THERE WAS NO DIAL TONE!

  I don't know that it is connected to my phone OK. Instead of a tone, I hear a loud hum, with a series of clicks. I can't hear being composed either DTMF tones, even when I disable "wait for dial tone. This behavior is the same if the modem is connected to the phone line.

  I have a big rally Friday and will need this modem to work... any help would be much appreciated...

  Thank you

  Matt.

  Hello
  that doesn't sound so good!

  The measure where I read that your ad you´ve checked your system almost all.

  Right on the thing, have you installed a firewall or other programs to check system that denied access to the modem?

  It is also ok, you should let check your laptop on a faulty Modem.

  Good bye

• Satellite A10: Modem - no dial tone error 680.

  Hello

  Seems to be a common problem search the ends of the net even if I have to find a solution.
  No dial tone error 680. Satellite A10 running Windows XP SP2.
  Interviewed modem-It's ok.
  Check wait for the tone. still not connect.
  Have tried different telephone cable, ISP, reinstall the drivers, control of the region (UK).
  Check the malware, corruption of the registry. Nothing there.
  Reinstalled from the Toshiba restore CD. Still the same problem.
  The BONES of config system permit
  Check for driver updates. None.

  Manage devices only show and COM ports if Port Modem Properties settings show that it is at COM3. have tried to change to COM4 - makes no difference.

  What is the solution?

  Hello

  This error almost always occurs because the computer cannot hear regular ringing when it picks up the phone line to dial through the modem.
  Unfortunately, there is no standard solution for this problem.
  Did you check that the modem is plugged into a phone point in the wall?

  In addition, check out this site for information:

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;326681&product=winxp
  http://support.GCI.NET/KB/kb74
  http://support.earthlink.NET/Mu/1/PSC/IMG/walkthroughs/windows_9x_nt/dialers/dun_1.3/2267.PSC.html
  http://www.Xtra.co.nz/help/0, 6156-1296801, 00.html

  Good luck

  Good bye

• Satellite L20: Modem does not get dial tone

  Hello

  My L20 specifications is not a tone whem I'm composing upward. On another pc, the connection works well, so I don't know that the line has a dial tone and the other computer is "listening".

  I also tried to uncheck the option "wait before the tone", tried to remove it from the Manager of devices, but after this all the modem still does not work. The current driver that is installed is version 7.20.00.00, because I can not install the latest version (7.25.00.00) (installation program does not end well, no specific error is given).

  Someone knows what to do?

  Open the system control panel, and then choose the phone and modem options.
  He check on the Modems tab. The modem should be placed in the list.
  If this isn't the case, then you must install the modem driver.
  Check the Modem function by pressing the 'button interrogate Modem.
  If the information window about the Modem contains a list of COMMANDS (including ATI2, ATI3, ATI4 etc.), then the modem is installed correctly. The ATI5 command ends with the number for the parameters selected regional (for example Germany = 06).

  To change the regional setting please use the Toshiba Internal Modem region Select utility.

• Satellite A30: Software Modem - no dial tone

  I reinstalled XP English on a machine bought in Spain.
  The modem has no link as all - no dial tone can be heard.
  I have installed the latest drivers, cables everything is OK. Phone line œuvres
  The modem seeks COM3 but there is no COM port in Device Manager.

  Hello

  I put t think that this issue has something to do with the COM ports. The com port is a virtual port.
  You should be sure that you have installed a modem for form Spain from Toshiba Web site driver driver.
  Secondly, please go to the modem properties, click the modem tab and disable the option to wait for the tone before dialing

• Modem not able to dial tone use portable US in Greece

  I bought the laptop from USA and I led her to the Greece, but when I try to log in I hear the dial tone, but the is not able to have the tone. I identify the location for the Greece.

  I have windows vista.
  In the laptop manual writes only: connect the built in modem only telephone lines analog ordinary not online (PBX) or digital (ISDN)

  My line is to the PSTN of OTE. Someone help me?

  Hello

  Unfortunately I have m no expert on this subject, but according to an article in Internet the PSTN Public Switched Telephone Network is an old international telephone system, that supports analog transmission via copper cable.

  I think that the modem should work.
  First, you must remove the modem driver and remove the modem region Select profile.
  Then download the driver of modem for the Greece and create and configure the new profile in the utility region modem selection.
  That I me remember this utility is located in the folder Toshiba-> network-> Modem region select.

  Good luck

• Unable to connect to the internet via a modem router - Satellite A200

  Thanks to Xardas, I was able to successfully install Windows XP Pro, but not everything is working as it should. Of immediate concern is my inability to connect to the internet (DSL) through the installation of the existing modem router that I use. How can I check that the ethernet drivers work? … My Satellite A200 does not - connect the appropriate port light does not illuminate.

  Oh yeh. I noticed that whenever I start (boot) a "Wizard" pane appears informing me that new hardware was found and that the drivers have not been installed but it doesn't tell me what the new material is! At the same time, there is a separate pane that announces that the drivers have not been installed correctly.

  Of course, I can use the computer as it is, but before letting my wife loose on this subject, I would like to get rid of anything that can give her cause to panic.

  Where are you Xardas?

  Check please the Device Manager and all the entries listed under network adapters. LAN card is listed there?

  Have you installed driver LAN?
  What A200 you exactly (A200-xxx)?

• Satellite A200 reporting screens not correctable hardware problem blue

  My model Satellite A200 PSAFCA-01H00J is blue screening and reporting of a non correctable hardware problem. I disconnected all devices, including the mouse.

  All tests of memory and the device driver may report any problems. I unplugged and reinsert the two memory chips.

  There has been no hardware or changes to software other than Windows to auto update.

  This machine runs on Vista SP1. I dug the following message: Root cause found Bugcheck 124 unknown parameters 0x0, 0x95f7c3f0, 0xb2000040, 0 x 800. MSDN Info for this can be found at
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557321.

  Anyone know where I should look for this hardware problem?

  If you remove the second module of RAM is still blue screen?

  I saw 0 x 00000124 on a similar laptop and it was a problem of CPU.

• Satellite A200 PSAE3: Windows XP Home edition do not recognize the modem and sound card

  Hi all!

  I can't understand what is the problem with my Satellite A200 (PSAE3)... I downloaded all the files on the right of the Toshiba Download Center, updated the BIOS to WXP but XP still not find any sound card or any modem. He isn't finding a device with a "?" question mark on this...

  There are so many different drives, I tried, but no one has changed the situation...
  Anyone has any advice?

  Thanks in advance,

  ciroopi

  Well, I found the solution to the problem! :)

  so, I write these verses down for anyone who might know the same problems:

  as usual, strictly follow the 'Toshiba A200 Installation sequence' found on the TOshiba driver download page.
  as he [I jumped no useful installation programs]

  I advice restart you each time you install a component, in order to have under control the whole Exchange.

  1 Windows XP Service Pack2 (RTM) - of course ;) -.
  [...]
  DirectX V9.0c 5 (SP2)
  Windows Media Player 10 V10.00.00.4036 6
  [...]
  10 Microsoft .NET Framework V1.1.4322 (SR1)
  11 Sun Java 2 Runtime Environment V1.6.0
  12 Intel ICH8M Chipset utility V8.2.0.1014
  13 Intel VGA driver 6.14.10.4833 965GM

  Note that driver VGA, the ATI we too, was also a difficulty - in fact, I don't know what it would have done - for the AUDIO sound card.
  You may have read in the installation dialog box.

  Moreover, I do not know if you must install the sun java, .NET framework and WMP version that displays the list, versions that are OLDER than the most recent, but just to be sure, download the form versions THAT NET.

  at this point, you should see "unknown PCI device" in the unknown devices in the system control panel.

  14 Realtek ALC268 Audio Driver V5.10.0.5433

  for realtek, I suggest you download the driver from the zip from the realtek download page; Once extracted from the latest version for desktop or a temp directory, I suggest to install before all the patch KB888111 you might find in the \WDM_Rxxx\MSHDQFE.

  then restart.

  for now, you should not see the "unknown PCI device" no more where it was before, but under the "system devices", like her, where you could also end the "Intel PCI Express Root Port", "Pci Bus" and so on [ja? m saying this to you because ja? m Italian aid of XP, and I don't remember the exact English names...].

  Now, install the audio drivers by using the setup.exe that you find in the \WDM_Rxxx directory.
  It should reinstall the kbfix and install the new drivers.

  Reset.

  After the reboot, nothing happens, but...

  .. see the "unknown pci device" menu - here? m not sure the name but the one with the exclamation mark in the 'system devices' - select 'Properties' and then 'driver' and 'update driver'. Let XP find the NOT on the net. tell XP to look for "Video and Audio Controller, game" [you know, the English entry that usually stands for device audio and similar] and he must find a CORRESPONDING driver, which is the "MICROSOFT UAA BUS DRIVER for HIGH DEFINITION AUDIO".
  If XP don't select this driver by itself, you should look for "\windows\system32\DRIVERS\hdaudbus.sys".

  After that, XP automatically detects ALL audio devices and install the correct drivers.
  In addition, it now the entrance to the modem, modem to install the separate driver, that we could find in down in the "list system", like her, on the Toshiba download page.

  So, hope this helps!

  See you soon,.

  Francesco

• Dial tone not detected on Modem Compaq Presario CQ61 - VM367UA product #ABA - Model CQ61-313US

  I have a modem which does not detect the dial tone. The modem, I replaced it with a new one and I still get the same message. I also reinstalled the driver, nothing helps. Do you know what anyone else I could try to solve the problem?

  The rest of the machine works fine. (Wireless / network Jack / etc)

  Thanks for any help you can provide.

  -TimJ

  If you had replaced the modem and reinstalled him his drivers, then you should check if the telephone cable and its connection.

• On the Satellite A200-1BJ wireless LAN

  Hello

  I need your kind help in this issue, think I'm dealing with my laptop. The driver disappeared and I can't. I tried to download from toshiba support, but it did not work also.

  OS: Vista home
  Model: Satellite A200-1BJ

  Also, whenever I try to use my modem it does not work and I get the message 'no dial tone' although the phone line works.

  pls advise me on these issues

  THX
  Khalid

  Hello

  what driver you downloaded? For Intel or Atheros? It would be really interesting because if you have installed the wrong driver, it s possible that it doesn´t work. So if you try the two pilots, one of them SHOULD work.

  With regard to your Modem:

  Go to control panel and then open the phone and Modem Options, and then choose the "Modems" tab, choose the modem you´re to help. Then, a window should appear where you must choose the tab "Modem". There is a "Control dial" setting where you must uncheck the box "in waiting for the dial tone before dialing."

  After that, the modem should work.

  Welcome them

• Satellite A200 - USB Ports stopped working

  Hallo, I am DESPERATE for help, please.

  I have a Toshiba laptop Satellite A200 series with 32-bit Windows.

  My USB ports give me major problems.

  I use a USB Internet Modem on multiple computers and it works fine on all computers, including Toshiba.

  A month earlier, Internet USB would suddenly and constantly disconnect itself from the Internet, when I use it in the USB one. When I use USB port two, he recorded no more. The port does not have the device.

  Two USB ports work well when used by other USB products.

  I had always used Internet USB into the USB port, with a cooling for my laptop fan, USB 2 port. Now, when I insert the cooling fan, USB Internet disconnects and will not register, at least I have remove fan, remove and reinsert the USB Internet.

  I did the following:

  1. start an anti-virus
  2 uninstall, re-install and update all the drivers for the USB, chipset famlies, Internet Modem ports, EVERYTHING.
  3. I checked with my Internet provider, the problem lies in my PC, not them.

  I don't know what to do, I'm tired.

  Help, please!

  Now, when I insert the cooling fan, USB Internet disconnects and will not register, at least I have remove fan, remove and reinsert the USB Internet.

  I think that it is a problem of USB power.

  The USB 2.0 port provides 500mA, and in some cases more than USB ports can be connected to the same power supply to the motherboard.
  In case the USB device connected (in your case fan) would need more than 500 ma, it could be that other USB devices do not work correctly.
  I recommend you go to Device Manager and select the properties of USB controller.

  The last "Power Management" tab contains the option to turn off the device to save power.
  This option should NOT be checked. It should be disabled.

  Check it out.