Modification of the ArrayDataModel starting from C++

Similar Questions

• WMP freezes, playback and time counter freeze and after a few seconds it will start from the point where it stopped.

  Original title: WMP 11 continues to stop audio playback

  I use WMP 11 for months with no reading problems but since yesterday evening he continues to stop for about 20 seconds every five minutes or so. When she did this, WMP freezes - meter reading and time to gel and I get the hourglass - and then after 20 seconds or more, the trail starts from where it stops. What is happening on all the tracks I did not play a single. I tried 20 audio files (mp3 all) through a dozen different albums. In addition, the gap between tracks seem longer than usual. I feel that it is looking for the data and playback stops because the time it takes to find the data is longer than the amount of data he has for playback? Either way, my files are stored on an external drive, and I'm now ask to update WMP for 'monitor folders' once again.

  I also downloaded a new copy of WMP 11 but this has not fixed the problem.

  I ran Fix It from Microsoft, but it has not to report any issue so I'm stumped. Any help appreciated thanks.

  Laptop Dell Inspiron 1300
  Windows XP SP 3
  WMP 11 - updates enabled
  Active Windows updates
  MSE firewall on / updates enabled

  Registry fixers never used because they can damage the file system!

  Thank you, Anoop - I notice that it is 7 - t - it too much work for XP? I'll take a look, although I found closure and restart toured (as far as the burning problem goes). Thanks for your help.

• Video of the Autorun Start at the specified Point

  Hi, I hope someone can help me to make a change to my Actions. Basically the code below is designed so that a video starts 52 seconds (rather than at the beginning) when you press play. It works well at this time, starts where it is supposed to, but I want to change the code so that it autoplays the video from 52 seconds. Well, the problem is that when I try and set it for automatic playback, the video starts from the beginning and does not wait so that it loads in 52 seconds before it autoplays. Any input on the coding? I need just so that AutoPlay is not kick until the video is loaded, and the second point 52. Thank you in advance! Beyond appreciated!

  Import fl.video.MetadataEvent;
  Import fl.video.VideoProgressEvent;

  Fl.video import. *;

  my_FLVPlybk.addEventListener (VideoEvent.COMPLETE, rewind);
  function rewind(eventObject:VideoEvent):void {}
  my_FLVPlybk.seek (52);
  my_FLVPlybk.play ();

  }

  var fp:FLVPlayback = my_FLVPlybk;
  fp.addEventListener (VideoProgressEvent.PROGRESS, videoProgressHandler, false, 0, true);
  fp.addEventListener (MetadataEvent.METADATA_RECEIVED, metaDataHandler, false, 0, true);
  fp.autoPlay = true;

  var startSeekTime:Number = 52;
  var videoDuration:Number;
  var videoSeeked:Boolean = false;

  function metaDataHandler(event:MetadataEvent):void {}
  If (event.info.duration! = null) {}
  videoDuration = event.info.duration;
  }
  }

  function videoProgressHandler(event:VideoProgressEvent):void {}
  var fp:FLVPlayback = event.currentTarget as FLVPlayback;
  var bytesLoaded:Number = event.bytesLoaded;
  var bytesTotal:Number = event.bytesTotal;
  If (! isNaN (videoDuration)) {}

  If ((bytesLoaded/bytesTotal) > = ((startSeekTime + 4) / videoDuration) & &! videoSeeked) {}

  videoSeeked = true;
  FP. Seek (startSeekTime);
  }
  }
  }

  use:

  Import fl.video.MetadataEvent;
  Import fl.video.VideoProgressEvent;

  Fl.video import. *;

  my_FLVPlybk.addEventListener (VideoEvent.COMPLETE, rewind);
  function rewind(eventObject:VideoEvent):void {}
  my_FLVPlybk.seek (52);
  my_FLVPlybk.play ();

  }

  var fp:FLVPlayback = my_FLVPlybk;
  fp.addEventListener (VideoProgressEvent.PROGRESS, videoProgressHandler, false, 0, true);
  fp.addEventListener (MetadataEvent.METADATA_RECEIVED, metaDataHandler, false, 0, true);
  fp.autoPlay = false;

  var startSeekTime:Number = 52;
  var videoDuration:Number;
  var videoSeeked:Boolean = false;

  function metaDataHandler(event:MetadataEvent):void {}
  If (event.info.duration! = null) {}
  videoDuration = event.info.duration;
  }
  }

  function videoProgressHandler(event:VideoProgressEvent):void {}
  var fp:FLVPlayback = event.currentTarget as FLVPlayback;
  var bytesLoaded:Number = event.bytesLoaded;
  var bytesTotal:Number = event.bytesTotal;
  If (! isNaN (videoDuration)) {}

  If ((bytesLoaded/bytesTotal) > = ((startSeekTime + 4) / videoDuration) &! videoSeeked) {}

  videoSeeked = true;
  FP. Seek (startSeekTime);

  FP. Play();

  }
  }
  }

• I replaced my original Apple Watch with a watch of S2. When I install and associate the new shows, is there a way I can restore all applications, configuration information and data of the original of the new shows so I don't have to start from scratch?

  I replaced my original Apple Watch with a watch of S2. When I install and associate the new watch and my iPhone 7 more, is there any way I can restore all applications, configuration info and data between the original and the new shows, so I don't have to start from scratch?

  Try this procedure

  Cancel the twinning of your iPhone - Apple and Apple Watch Support

  Spend your Apple Watch a new iPhone - Apple Support

• Sometimes during random playback of music, next song starts from the Middle

  This has happened for about 2-3 months now. It is usually a rare event. Maybe its just me, but I feel that slowly becomes more frequent...

  In any case what happens is, while I'm listening to my iphone the shuffle, it starts the next song as usual, but sometimes this song will start from the middle. It's weird. It also happens when im jumping songs manually.

  -A.L.

  Start with the basic troubleshooting steps.

  First, try a simple Reset: hold down the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

  If this does not help, you may need to restore your iPhone.

  https://support.Apple.com/en-us/HT204184

• Cannot start from the CD in my Satellite P300-23F

  Hello

  I'm trying to fix the old laptop from my brother. It's a Toshiba satellite p300-23f. The laptop did not work well, so he bought another. I think he might have a problem with the HARD drive, but I'm not sure about this and want to try to format the HARD drive and reinstall the operating system.

  When I start from the disc HARD I have no problem, insiders of OS normally, and I can 'use' laptop. The problem is when I try to boot from the OS CD. I get this message "Media test failure, check cable". I know the CD works, because recently I have instaled the operating system with this CD on another computer. I know that the CD player (not sure if it is called like this, but I think you understand what I mean) also works very well, because I tried different CD and it worked.

  I've tried pressing F12 and boot from CD it and also tried to change the BIOS and put the CD in the first place, but it does not work.

  No idea what's going on? Is it possible to make it work?

  Stand by.
  When Windows is completely loaded, you can use the optical disk drive and it reads all CDs and DVDs?
  When you put your Windows Windows installation disc can see the contents of the disc in Windows Explorer?

  Maybe you can use the CD but not DVD. check it out please.

• NetBook - cannot start from the CD live Ubuntu 8.10

  Try to boot from Ubuntu 8.10 live CD on my Netbook NB100 to see if everything works before upgrading - starts OK but then after a few minutes I get just a screen rolling filled with dev sr0 and block numbers of the IO error.
  The CD starts OK on my Toshiba Satellite.

  Someone at - it ideas?

  Hello

  I'm not Linux expert but autour Googling, I found this discussion. Maybe it can somehow help you.

• I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  Sorry, but you can't activate an iPhone without a SIM card installed. It is simply not possible to do.

• My C50 - B Satellite does not start from the HARD drive

  Details of the machine: -.

  Model number: PSCMLA-03F07Q
  Serial number: XE343127P

  Computer does not start from hard drive. No error message, just the start Toshiba at the end of self-test screen.

  Sometimes a reinstall of the operating system seems to correct the problem, but then he would go again, now the problem is consistent.

  I reduced the possibilities to a fault of BIOS, reasons.

  System boots from USB with no problems. Installation of operating systems is done without error. SMART hard drive data indicates a perfectly healthy hard drive. Memcheck will return no error.

  The obvious solution is to reload the BIOS, just reset it doesn't help. But that is the problem.

  1.4 BIOS update that the Australian site offers is a Windows program and the computer cannot start Windows.

  Obvious answer is to use a bootable USB key with an operating system 'live' on this issue, but all of these systems are Linux and the update of the BIOS is a Windows program. So much for smart solutions.

  Downloaded Bios version 1.7 of the European site but the iso inside the rar file is empty, 25 MB in size but nothing in there according to Linux. Tried to run his program on a Win7 64 bit computer and it returns an error that it could not find the correct iso file.

  I submitted a support request by email to Toshiba, but they believe that it could take three days to get a response, so I thought I would ask here as well. Can someone tell me please to a working copy of the latest BIOS update disk for a laptop Satelite C50 - B? Note: this model does not have a CD player so iso should be compatible with USB boot.

  See you soon,.

  Andrew.

  Hello

  From my experience that I n think that BIOS update is the final solution for you. When you set the default settings of the BIOS disk HARD appears correctly in the BIOS settings?
  HARD drive is also offered and listed as boot device when you enter in the start using F12 at startup menu?

  What happens when you start using recovery image installation created recovery USB key (I hope that you have created a)?

  Offer BIOS updates are versions of WIN and can be performed by running the Windows operating system.

• Satellite C850 - start from the number of DVD - replace Win8 by Win7U

  Got a new C850-1JZ yesterday and I am trying to replace the pre-installed Win 8 with Windows 7. I created the recovery media (3 DVDs).

  The laptop makes me 'crazy' because it seems to block any attempt to start anything else than Win8 preinstalled hard disk.

  1.) Inserted Win 7 Ultimate DVD and tried to start, wouldn't boot from the disc.
  Loaded 2), Advanced menu start and I tried to boot from ODD, wouldn't boot from the disc. (The options are LAN, USB, HDD and ODD (assuming that it's optical disc))
  3.) regular Changed priority boot bios settings to boot from the BIZARRE first, then HARD drive, wouldn't boot disk.
  4.) learned he is a 'bunch of security protection' mechanism activated by default in the bios. Turned it off. The machine starts to load ODD and says "Windows is loading files" and then hangs. It is a Win7 Ultimate original MS disk from the Microsoft store, no scratches. Makes no sense. In fact, we have 2 of them, so I tried another, same result.
  5.) thought screw that, let's just put the hard drive of the other computer (T61) here then and clean again to set up another time. Replace hard drive with another hdd sata who has Win 7 ultimate installed and configured. When booting from the hard drive, it says 'No BONES' found and restarts. At the start of ODD, it starts with windows is again loading files and then freezes.

  What kind of other settings of extra protection/virus blocker/stupid am I missing here? It's confusing to me. Thank you.

  I managed to install Win7 on my U940 and everything I've done is actually described on http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm

• Cannot start from the CD HP Pavilion 15-n003sq

  Hello, I'm trying about three days why my laptop do not show me the CD option in the Boot Menu (F9).

  I need to reinstal my windows (8) and I don't really have the time to find a USB key (I don't have in any case..), so I have to do for the CD to start windows.

  I don't really understand why it doesn't, after all, it worked the first time when I instaled windows 8.

  I'm looking online for the solution, but I can not find the USB solution. This isn't a solution for me I need to install CD... What happens if I put in shape all-> them my disk partition (up to drive local C will remove a part of windows and it will colapse...) then will probably be to boot from the CD?

  Secure boot it is disabled in the BIOS (in any case, he let me to him allow for). Legacy Boot, I tried with her, turn on and off, I have not seen a chage.

  Thank you

  Radu

  Hello

  Is not important anymore. I don't know why, but it worked after all...

  I forgot the Windows CD in my laptop during the night and the next day when I open it, the laptop started direct with instalation windows - I don't know why because I did not do anything (I restardet and shut down the laptop before a lot and did not work)...

  Thanks in any case and thanks for the very quick response

  All good,

  Tavi

• Modification of the program of "Getting Started" sample to acquire data of multiple frequencies

  Dear members,

  I am very new to the LabVIEW and worked (mainly through aid of Google) to change one of the samples included with LabVIEW 2010 programs to suit my purpose.

  Essentially, the "Getting Started" program that comes with the LabVIEW 2008 works in the following way

  1. The user runs the program
  2. The user sets the frequency to whatever is needed
  3. User presses the "Trigger" button on the front that gives the values of the two boxes on the front panel
  4. Program stops automatically

  I modified in the following way

  1. I enter the "recurrence interval" and the "maximum rate" in a table to calculate the number of iterations
  2. I then pass the frequency required in the 'constant' through dissociation TI (where I was setting at the start manually the frequency)
  3. From there, the program runs exactly as before
  4. I wrapped the existing set of block diagram in a loop 'For' to repeat several times, with a different frequency every time
  5. Then, I finally write measures in a worksheet in addition to posting on the "façade".

  The problem that I face is that the frequency is not updated in the program. For example, if the last frequency used on the parser a 20 Hz, the program will be to take measures against the same 20 Hz rather than against the correct frequencies several times.

  So, in the spreadsheet I created, I get 1 kHz, 2 kHz... 10 kHz, but the values of impedance values recorded against them were indeed all taken against 20 Hz (or how often I last used by using the non-modified program).

  I suspect that the frequency is updated whenever the user presses the button "Trigger", but since I took this, for purposes of automation and replaced by a constant static in the 'real', it could cause problems. I don't know if this is definitely the problem, but even if this is the case, I can't find a way around it.

  Any help would be greatly appreciated as this provides a bottleneck in my project.

  Thank you

  Attachments:

  VI program Original

  VI for updated program

  Files zipped (for the support of dependence)

  Dear Robert,

  I am in using LabVIEW 2010 was therefore not able to run the code you have provided. However, I managed to get one of my friends write me the code that I have attached, to help anyone who has the same problem in the future.

  Thank you for your time and effort.

• Scan a multi-page document starting from the plateau of HP Officejet Pro 8600?

  Before Windows/7, which I use in 64-bit mode, we had Solution Center HP, which has supported the scanning multipage documents starting from the tray (e.g., scanning several pages of a document linked (for example, a book)) in a single PDF multipage doc.  HPSC has apparently been replaced by HP Scan, et al.  I have a new HP OfficeJet Pro 8600, and there seems to be NO WAY to SCAN SEVERAL PAGES OF A BOOK IN A SINGLE PDF DOCUMENT of several PAGES.  Help me to solve this problem or give me HP Solution Center.

  Thank you

  Jim

  No problem at all. It's understanbable. If you encounter other problems, feel free to ask.

• execution of the program missing from the bottom of my Start menu

  execution of the program disappeared from the bottom of my menu start how do new

  1. right click on the start menu
  2. click on properties
  3. click on customize
  4. click on advanced
  5. search for 'Run' and check the box
  6. click on OK

  In addition, you can press the Windows key + R to bring up the run window.

• Xp pro installation gets past the copied installation files and then restarts, rather than continue with install it starts from the beginning again.

  new installation of XP pro on a Dell Inspiron mini

  Xp pro installation went copied files Setup then restarts, rather than continue with an install it starts from the beginning again, laptop is configured to boot from the hd, but does not do that, I reset bios to default and hd settings has been reformatted, the cd for this laptop drive is usb because it has not built in 1... If I try and I remove the usb cd when reboots after copid setup files it told her there is no operating system...

  any help much appreciated...

  Hi, Leon,

  Always include computer make and model, please.  Thank you.

  Research in the Bios (reboot and press F1 or F2 depending on your system, check that all usb options are enabled (for example, USB legacy or support for USB 2.0 devices).)

  If there is a timeout parameter, set it to Max.

  Then, find the boot device priority section

  A USB flash drive, which is usually listed as USB - HDD, but may be listed as a removable device, will have a priority very low start.

  Rearrange the boot device priority so that the flash drive has a higher priority than the hard drive.

  Install Windows XP from USB key

  • Insert the USB key into the USB port on the computer.

  • Open the "I386" folder and find the file "Winnt.exe".

  Double-click on the "Winnt.exe" to launch a command prompt BACK to an installation of Windows XP.

  Type the path of the location of your "I386" folder in the DOS window. For example, if your USB is the letter "D" in your "My Computer" window, type "d:\i386" without the quotes and press the Enter"" key.

  Let the installation program copy the Windows XP installation files on your computer.

  Restart your computer to a command prompt. The Windows XP Setup will continue automatically.

  Follow the on-screen instructions to complete the installation. The program will ask you your Windows XP product key in this process.

  http://www.ehow.com/how_6912418_install-Windows-XP-USB-drive.html

  Make a bootable memory card or USB key using PEBuilder

  http://www.tech-recipes.com/Rx/2583/making_a_usb_drive_or_memory_card_bootable_using_pebuilder/