NetBook - cannot start from the CD live Ubuntu 8.10

Similar Questions

• Cannot start from the CD: Error Code 5. __Asking driver primary IDE channel.

  I install a new copy of windows 7 on my old computer. My computer have no major problems from Advisor Windows 7 report. When the system boots on the DVD I got the error message cannot START FROM the CD: error 5 CODE. Also, I can't start XP installation. When I get to the part on which partition to install I got the message to load a driver. He asks me to load a driver for the MAIN IDE CHANNEL. I have search on Intel, Gigabyte and other internet sites but have not found a specific driver.
  My computer is:
  Processor Intel P4 1.7Ghz
  15 GB OF RAM
  GeForce 7600GS
  320 GB IDE HARD DRIVE
  Card mother Gigabyte GA-8ITX3
  Intel 820 Chipset family with 82801BA (ICH2) I/O controller.

  Help, please!

  P.S. noticed that 2Angel had a similar problem but no solution.

  Error code 5 - can't boot from DVD

  Some people have reported that from the installation of Windows 7 so that Windows XP/Vista is running can help with this error. Update your BIOS may also help.

  Here is a workaround that can also help:
  http://www.SevenForums.com/installation-setup/2591-boot-error-code-5-a-2.html#post31719

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Cannot start from the CD in my Satellite P300-23F

  Hello

  I'm trying to fix the old laptop from my brother. It's a Toshiba satellite p300-23f. The laptop did not work well, so he bought another. I think he might have a problem with the HARD drive, but I'm not sure about this and want to try to format the HARD drive and reinstall the operating system.

  When I start from the disc HARD I have no problem, insiders of OS normally, and I can 'use' laptop. The problem is when I try to boot from the OS CD. I get this message "Media test failure, check cable". I know the CD works, because recently I have instaled the operating system with this CD on another computer. I know that the CD player (not sure if it is called like this, but I think you understand what I mean) also works very well, because I tried different CD and it worked.

  I've tried pressing F12 and boot from CD it and also tried to change the BIOS and put the CD in the first place, but it does not work.

  No idea what's going on? Is it possible to make it work?

  Stand by.
  When Windows is completely loaded, you can use the optical disk drive and it reads all CDs and DVDs?
  When you put your Windows Windows installation disc can see the contents of the disc in Windows Explorer?

  Maybe you can use the CD but not DVD. check it out please.

• Re: Satellite L310 - cannot start from the HARD disk

  Hello

  My L310 just died on me yesterday. My system just can not start, not even in Safe Mode. And it keeps trying to start using my network card, not through hard drive.

  I put the BIOS default settings, but it does not help.

  And she has this tone to loud continuous beep when it tries to start using the network card. A continuous beep, even on the screen of the BIOS and in safe mode.

  I chose the hard drive manually, but he keeps trying to start through the network adapter.

  And the laptop does not meet the keyboard. Even with a keyboard external usb. When I sometimes managed to boot my system on the rare occasion, I get to the login screen and cannot button my password.

  Does anyone have similar problems?

  Let me know. Thank you!

  Looks like your HARD drive is defective. BIOS recognize it?
  You should test the disk with Drive Fitness Test. Download the CD image, burn it to a CD and boot from it:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT

  Check this box and give us feedback. Maybe the HARD drive needs to be replaced.

  On the keyboard issue it is not easy to say what are the causes of the problem, but in the worst case that he should be replaced also. :(

• URGENT! Cannot start from the HP recovery discs.

  I am facing a problem weired with the help of HP recovery disks (ordered from HP).
  HP drives are bootable, I checked on another desktop not HP. My Pavilion cannot boot from HP discs, but it starts on the other Windows 7 bootable disk. Even this drive gives me the error to the expansion of the files windows to 52%. It says failed to load the driver for the drive and asks me to select the drivers, so I inserted the disc Driver from HP, but it says nothing found.

  I tried to use HP discs after, whole HARD drive then create 100 MB system reserved partition (NTFS), 100 GB NTFS for the C drive for installation of Win; but still no luck. After selecting CD/DVD in the start menu, the continuous cursor to blink on the left corner for a few 10s of seconds and the system reboots without any messages.

  When I tried with Linux Mint 14 KDE startup disk, it installed smoothly without any mistakes and right now, I'm using Linux.

  So this is a strange problem where I can't decide what thing is defective; If my reader DVD, DVD or my Pavilion. But all work to differnet scenarios. Please suggest a solution if you know.

  Help, please!

  Thank you!

  
  ____________________________
  | Please hit Kudos, if I help you! |
  | |
  | WILL |
  |___________________________|

  Hard reset did the trick!
  Retrieved using HP discs!

• Satelite C70-B-32D - cannot start from the CD

  Hello

  I can't boot from the CD. I changed the boot in the BIOS accordingly and always order boot from the HD. The CD is very good and starts fine on other PCs.

  In order to boot from sources other than the HARD drive, you must disable secure in the BIOS startup

• Cannot start from the CD HP Pavilion 15-n003sq

  Hello, I'm trying about three days why my laptop do not show me the CD option in the Boot Menu (F9).

  I need to reinstal my windows (8) and I don't really have the time to find a USB key (I don't have in any case..), so I have to do for the CD to start windows.

  I don't really understand why it doesn't, after all, it worked the first time when I instaled windows 8.

  I'm looking online for the solution, but I can not find the USB solution. This isn't a solution for me I need to install CD... What happens if I put in shape all-> them my disk partition (up to drive local C will remove a part of windows and it will colapse...) then will probably be to boot from the CD?

  Secure boot it is disabled in the BIOS (in any case, he let me to him allow for). Legacy Boot, I tried with her, turn on and off, I have not seen a chage.

  Thank you

  Radu

  Hello

  Is not important anymore. I don't know why, but it worked after all...

  I forgot the Windows CD in my laptop during the night and the next day when I open it, the laptop started direct with instalation windows - I don't know why because I did not do anything (I restardet and shut down the laptop before a lot and did not work)...

  Thanks in any case and thanks for the very quick response

  All good,

  Tavi

• Cannot start from the installation DVD after factory reset my Windows VIsta computer.

  Original title: PC crash will not restore

  My pc crashed this morning.  I tried restart did not work.  System Restore tried told me no restore points.  Then did restore it to the factory, formatted, then said it was full but the pc still does not start.  I am trying to recharge cost of Windows Vista, but the pc can't see the cd, dvd, or usb key, so I can not install.  How can I reload windows?

  Hello

  Remove all external devices such printer, USB drives and check if you are able to boot from the DVD. If this does not help, contact the OEM (Original Equipment Manufacturer).

• cannot start from the cd with dell gx1 optiplez

  I have power old gx1 and I can't boot from the cd bios does not boot priority and I just can't understand the configuration of the jumpers any help would be greatly appreciated

  
  

• Portege M205-S810 - cannot start from the CD

  The hard drive on my Portege M205-S810 doctors went belly up recently and I replaced it for her.
  When she could not find the external CD drive provided with the machine, I bought what I thought, it was a CD/DVD external Toshiba.

  Readers of original equipment bit that I found online were ridiculously expensive.
  I found one on Ebay for $55. Should have known it was too good to be true.

  The key is that I can't start the recovery disc to load xp on the new drive.
  Is it possible to work around this problem, or am I just GROUND?
  Has anyone tried using a PCMCIA USB adapter card so that it can boot from a CD Universal USB?

  Thanks in advance for your help.

  A Novice

  Hello

  As far as I know not all external drives are bootable and you should use the compatible and supported a.

  As I m not wrong the drive USB2.0 SCD2-PA3352E and the PA3402E-1DV2, Rev.501 USB 2.0 DVD Super Multi drive are tested and works for sure!

  I think you can also use the Toshiba PX1054E-1NST Freecom drive with CardBus card, cable II.

  But I found also a very interesting topic here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19232&

  The kjo user posted a nice instruction how to boot from a drive USB diskette or drive freecom pcmcia-cd/dvd

  Check this maybe useful for you s also

• Home CD not active - WinXP virtual system - cannot start from the CD to install WinXP

  I'm new to this product, although I used vmware customer a while back on a Windows System.

  I have a P4-24 base system. G Intel chipset with new CD/DVD IDE burners/readers.

  These are both on IDE1 and nothing is on IDE2

  I have two drives SATA WD120G who are the active disks.

  ESXi 3.5 installed OK and I can create a virtual machine using the VMware Infracstructure customer.

  When I start the client machine I have CD/DVD host will start the Windows XP CD, but it fails

  to do so. I tried the option to use the client CD started the power upward, but so far I can not install the WinXP operating system

  on the virtual machine. I even unplugged of the DVD to limit the scope, but that made no difference.

  It's almost as if the virtual machine cannot find the CD/DVD drive.

  Can someone suggest a resolution?

  

  I never use physical media (do not say that it does not work) - I use the ISO. I find in situations like yours is to mount the iso for the virtual machine outside the parameters of the virtual machine - simplest method, you will see an option to connect to cd/dvd in the menu in the VI client.

  Another thing - you will need to connect a flp buslogic image to a floppy drive so that the XP VM can see the buslogic controller (so you can see the hard drive) for installation of the operating system.

  http://virtrix.blogspot.com/2007/09/vmware-installing-windows-xp-on-esx.html - this link also has a buslogic.

  If you find that you don't have enough time to interact with the menu of the loader boot - set a delay at startup in the settings of the virtual machine to 5000ms - this will give you 5 seconds.

  I hope this helps.

• Cannot start from the CD on Satellite L10

  Hi, I had several problems during the last two weeks with my Toshiba laptop. I decided to back up all my files and use the recovery disk to erase everything. I put in the disc and then changed the BIOS so that the CD/DVD drive was the first. (I hope, Toshiba L10 and "Utilities" CD series tools, is the right disc)

  It just loaded windows as normal and I can not seem to get the startup disk. If you have any advice for me please answer as soon as possible.

  Thanks in advance :) Ashley

  Hello

  You must find the Toshiba Recovery CD. On this CD, you will find the image completely with Windows and all Toshiba drivers and utilities.
  From this CD you must boot to install the new OS.

  Other CDs contain only the software, drivers and utilities you can find on the page of the Toshiba driver.

• I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  Sorry, but you can't activate an iPhone without a SIM card installed. It is simply not possible to do.

• Satellite M45: Cannot boot from the CD-ROM or HARD drive

  I get the following messages...

  WHEN BOOTING FROM HDD: "Invalid partition table".

  At the START of the CD: "No Bootable CD in ATAPI CD-ROM.
  By so, even though I have the recovery CD and the computer can not read them.

  I tried to change the order of boot without result. Created a bootable CD Bart, who works in my other computer, but not in this laptop. Are there special drivers, I need for this CD?
  I'm out on this one.

  Thank you

  Hello

  I think that your partition on the HARD disk is damaged and so you cannot boot from the HARD drive.
  In this case, the HARD drive must be formatted completely and then you could try to install the OS.

  It seems also that your drive cannot recognize the CD bootable (WinXP?) and, therefore, it of not possible to boot from the drive.
  Well, it really stupid s :_| situation really stupid!

  However, did you try to boot from another CD? For example Microsoft Windows original CD?
  If not I recommend you to do and eventually the reader will be able to read the CD.
  If this isn't the case, so I think that the reader must be checked. Possibly it also corrupted s.

• avoid starting from the trojan CD Vista

  Windows scan false captured Trojan horse. Protection and disabled system restore. Original dell drive used to start from the CD-ROM. would restore not before the infection on April 18. Now have a version where I can't pictures etc. Have windows vista old and would get in other parts of my programs. At a loss as to what to do or how to do to recover my system to his old self less the Trojan horse. Any help would be appreciated.

  Hello

  You cannot access the windows.old folder programs

  It is only to recover data from

  programs need to be reinstalled

  read this

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  remove malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You should also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.