MODIFICATION OF THE MODULE KNOWLEDGE

Hi gurus,

Is it compulsory to learn how to change the ODI knowledge modules?

or I can handle work ODI with the help of the forums if I want to change the knowledge modules?

Thanks in advance.

Ganga

You can work and do almost everything with the KMs in what they are. The thing is, any time if change you it a little, you will much more to it.

For example, if you work with version 11 or less, you should change your KMs to set single step, in this way you can run at the same time any integration. To do this, you need only to add a step in the KMs and slightly change your topology.

Have a look here:

http://odiexperts.com/interface-parallel-execution-a-new-solution/

If you work with Hyperion Planning, you will have to reverse all of your applications and planning for each dimension, you will have a data store. But in the most part, the dimension between the Apps have the same configuration (only with different members), then if you change the KM a little you can loop and change the soft dynamically, making your package have much fewer interfaces, and you have a lot less work to develop.

10 things to improve the ODI integrations with Hyperion Planning part 1 (the Application loop) | EMP DEV

If you want something a little more advanced, you can change you KM instead of use a store of data (from the opposite), you can build dynamic store for your data inside your KM:

10 things to improve the ODI integrations with Hyperion Planning part 8 (building planning DataStore). EMP DEV

You can create steps to check if a partition exists in a table and create so Don't;

create a validation inside the the tieout KM data you load (such as a sum or an account to the source or target)

What I mean is, if you change your KMs you will have a lot of less work and much more power.

And don't worry, most of the changes are very simple, simply use the API of the ODI (and you can find inside the ODI, all possible alternative methods, just to see each one you need to use and google for possible settings)

and you need to try it.

Duplicate an original KM (always duplicate the KMs, never start from scratch)

Think about your problem and how you can solve it

Look in the API

And that's all. Is not difficult, I can garanthee.

And how do you know that you need to change a KM? Very easy, whenever you need to do more than a simple interface that allows you to do something, or when you need to do something in the middle of an interface (as you want to create a partition, because a new value can come in new data).

Hope this can help you.

Tags: Business Intelligence

Similar Questions

  • Modification of the Module dependency entries in the generated file to COD

    Hi all

    I am trying to build a blackberry application that uses web services. I use my own implementation of web service client because most of the mobile does not support RPC or JSR 172. So I do not use net_rim_jaxrpc blackberry module. I tried to deploy the application in 8130 (Verizon) Pearl and Curve 8320 (T-Mobile). It works very well in Pearl but he launched 'Net_rim_jaxrpc Module could not be found' error in curve 8320. I looked for versions of software to both phones. Pearl has a version 4.3 and curve has a version 4.2. I know that version 4.2 doesn't have a net_rim_jaxrpc module, then it throws the error message. I looked in the JAD file and it has an entry for net_rim_jaxrpc in "RIM-COD-Module-dependencies. My question is, since I do not use net_rim_jaxrpc API why he puts this entry in the JAD. I even tried to delete this entry from the JAD but curve 8320 always up the error message. If its configuration "RIM-COD-Module-dependencies" in another place in the COD file. If under its weight so why is - do this so that even when I'm not using the API. And how to remove this entry for dependence. I use eclipse 3.2 for development.

    Someone please help me on this.

    Thank you

    Gopi

    The problem is resolved. Problem is not with the development version. Problem is with the import statement. There was an import for 'javax.xml.rpc.Stub' statement, and I don't notice it. But when I changed the JDE 4.2 development, he began to show an error message for the unknown variable in the IDE. I changed the import to my own Stub class and everything seems to work very well.

    Thank you for everything that you guys!

    I have another question. I have a custom button and clicking on it opens the BB browser. On the development, I need the button to look like a hypertext link with the symbol of the hyperlink (a symbol of the hand). Can anyone suggest me something on this? I have to do something in the drawFocus or onFocus the custom button?

    Thank you

    Gopi

  • Problem importing the Module knowledge

    Hello
    When exporting data from a relational table to another relational table (and the primary key of the target table is populated by sequence) I need to import "* IKM SQL for SQL Append * ' for the target. But I can't find such an option in the list of options import knowledge. What can I do? When I select IKM SQL for SQL command Append it shows fatal error. Help, please.
    NB:-these are my options
    IKM Access incremental update
    IKM DB2 400 incremental update
    IKM DB2 400 incremental update (CPYF)
    IKM DB2 400 Dimension to slow variation
    Incremental update of IKM DB2 UDB
    IKM DB2 UDB Dimension to slow variation
    IKM file for Teradata (TTU)
    Incremental update for IKM Informix
    IKM JDE world command Append
    Incremental update IKM MSSQL
    IKM MSSQL Dimension to slow variation
    IKM Netezza command Append
    Incremental update of the IKM Netezza
    IKM Netezza to the file (EXTERNAL TABLE)
    Incremental update of the IKM Oracle AW
    IKM Oracle BI to SQL add
    Incremental update of the IKM Oracle
    Incremental update IKM Oracle (FUSION)
    Incremental update IKM Oracle (PL-SQL)
    IKM Oracle Multi Table Insert
    IKM Oracle Dimension to slow variation
    IKM Oracle Spatial incremental update
    Control of Oracle for Oracle IKM Append (DBLINK)
    IKM SQL command Append
    IKM SQL command Append (BSE XREF)
    IKM SQL command Append (SOA XREF)
    IKM SQL incremental update
    IKM SQL incremental update (line by line)
    IKM SQL to the file Append
    IKM SQL for Hyperion Essbase (DATA)
    IKM SQL for Hyperion Essbase (METADATA)
    IKM SQL for Hyperion Financial Management Data
    IKM SQL for Hyperion Financial Management Dimension
    IKM SQL for Hyperion Planning
    Add IKM SQL to JMS
    Add IKM SQL XML JMS format
    IKM SQL for SQL command Append
    IKM SQL for SQL incremental update
    IKM SQL for Teradata (TTU)
    Add IKM SQL for control of Teradata
    Incremental update for IKM Sybase ASE
    IKM Sybase ASE Dimension to slow variation
    Incremental update for IKM Sybase IQ
    IKM Sybase IQ Dimension to slow variation
    IKM Teradata command Append
    Incremental update for IKM Teradata
    Statement of Teradata Multi IKM
    IKM Teradata Dimension to slow variation
    IKM Teradata to the file (TTU)
    Incremental update IKM TimesTen (FUSION)
    Adding the XML IKM control

    Instead of doing all the transformations in the staging. Make a transformation in the target. Until the expression editor, you can see run on the source, staging, target. Select on target for at least one column. See if it works.

    Example: sysdate must be running on the target.
    Thank you.

  • using the module knowledge Oracle LKM to Oracle (DBLINK)

    Hello

    I use in an interface the LKM oracle to oracle (dblink) because my store of data source and target are oracle. I run my interface, but the operator gives me the following error:

    1729: 42000: java.sql.SQLException: ORA-01729: database link name EXPECTED

    In the descriptions, there is this implementation:

    create the database link
    connect to applications
    identified by < @= snpRef.getInfo ("SRC_PASS") @ >
    using the "

    So it seems that it does not create the database link, also if I put the AUTO_CREATE_DB_LINK Yes!

    Why? Can someone help me? How can I set the database link?

    Thank you

    Hello

    go to your physical server and put the name of DBLink on the box corresponding to the first edit window...

    This help you?

  • can not see the default knowledge module

    Hi guru

    I don't get the module knowledge when I try to import.
    What is the problem. Help, please.

    Thank you

    Please go
    \oracledi\xml-reference
    Example \Oracle\11.1.1\Middleware\ORAODI\oracledi\xml-reference

    All the present KM inside xml-reference.

    Thank you

  • FPGA code with the evolution of the modules

    I need to create FPGA code to a cRIO-9072 facing the development of the modules.

    My cRIO will have a number any NI 9203 (analog acquisition) and modules OR 9411 (acquisition digital) as inserted by the operator. When turning the power on, the system must identify two possible modules were inserted in each of the slots. Subsequently, he will then know what choices of code to call to acquire data from the individual modules.

    I found the article in the knowledge base for CRY that queries each module and again reports the type of module and I can use it to successfully detect modules, but what LabVIEW fails to allow me to do this is to compile my FPGA code that was designed to deal with possible modules. After compiling, I get the error: "IO found point FPGA project. You must add the I/O item in the Project Explorer window, or select a different element in the control of FPGA of IO or the constant"because the compiler requires the appropriate modules are configured in the LabVIEW project. Unfortunately, this would require two different modules to be configured for each slot at the same time as there are sections of code for the 9203 modules and sections for 9411 modules for all eight locations coexist in a vi.

    Anyone have any ideas on how to get LabVIEW to compile my FPGA code somehow?

    Many thanks in advance,

    With the current draft of LabVIEW FPGA, you cannot compile a LabVIEW FPGA VI which manages several configurations of C Series modules.

    For your application, you must create a target of your project for each of the possible configurations of module and build the corresponding FPGA VI. Then, compile each of the screws to create the necessary for each configuration FPGA bitstream. Then in your host VI, you can detect what the current configuration of the module and download the binary stream appropriate for the FPGA. Another issue to consider is that the reference to the FPGA VI/bitstream returned by the open FPGA VI reference function will be unique to each bitstream/module configuration. So in your host VI, you'll need treat each configuration of the module with a separate set of code by contacting the FPGA.

    If you consider only two different modules and an eight slot chassis, there are 9 modules possible combinations. The condition would be to the end user to place all modules of the same type together, either from the left or the right side of the chassis.

  • Installation of the Module LabVIEW 2012 SP1 FPGA with LabVIEW 2012 SP1 64 bit on Windows 7 X 64 machine.

    I installed 32-bit and 64-bit LabVIEW 2012 SP1 on Windows 7 X 64 computer. After that, I installed SP1 FPGA Module. While module FPGA completely installed in the 32-bit version and could develop projects fpga, FPGA interface has not installed the 64-bit version. Anyone had this before question?

    The document 5WMF8NQ2 knowledge base says it's doable.

    I have tried to repair the installed module, remove and then reinstall the module. Nothing helped me to get the FPGA interface on a 64-bit host VI. Any suggestions? Addition of the individual screws through the range of editing functions like a tedious process and the palette is not completely functional.

    I solved the problem. Had to repair each driver separately for LabVIEW 2012 SP1 64 bit installed on the default drive. You may need to copy paste files to the folder that it installed in function.

  • Any progress with change of page (proportions) in the module size book in Lightroom?

    I am interested in the use of the module of Lightroom book, but I need the flexibility to change the proportions of the book.

    To my knowledge, it is not possible yet.

    Any reasonable work-around of no square books?

    Custom page size is one of the most popular queries in the Adobe official feedback forum: Lightroom: ability to create customized from scratch book models/sizes. Please add your vote and opinion to make (at least slightly) more likely Adobe will implement.

  • control of fascist style of addons is a bad thing and prevents from getting the modules there are out there of dev.

    control of fascist style of addons is a bad thing and prevents from getting the modules there are out there of dev.

    This will be only stifle creativity and prevent new addons are made.

    Said heavyoak

    control of fascist style of addons is a bad thing and prevents from getting the modules there are out there of dev.

    This will be only stifle creativity and prevent new addons are made.

    How is that what does strike you?
    https://blog.Mozilla.org/addons/2015/08/21/the-future-of-developing-Firefox-Add-ons/

    «We are implementing a new extension API, called WebExtensions...» »

    The infrastructure of the current extensions will be gone and with it will have the advantage of current extensibility that Firefox had more Chrome and Opera. Kinda like the rating "fascism" for "communism".

    So at the end of next year we can be moaning about something much bigger than the current "signature" minor schism or "bump in the road."

  • How can I DISABLE the module "signature" when I want TO use an older add-on?

    I the MAGNIFICENT Add on 1 - ClickWeather and now has a message on the 'signature' module Now... I DON'T want to use a product of INFERIOR quality such as suggested in the name of the add - on.

    I would use the add-on that I already have on my Firefox, 1-ClickWeather. So, how can I disable the 'signature' on an individual add-on module? It is said to "Act with caution", but it does not show Me the details of my time. I reinstalled the add-on, but it does not yet record my position.

    Yes, I KNOW it is no longer supported, but has always worked until this past Saturday. It was abandoned several years ago but was kept alive by a single poster whose comments have disappeared. I have the add-on on my computer. I continued to update the continuous Firefox updates. Now, I want to again but there's this ridiculous thing on the module "signature" and «proceed with caution...» »

    You cannot delete the warning, but in 42 Firefox extension should always work.

    See:

     Firefox 40-42: Firefox warns about signatures but doesn't enforce them.
  • I have install the module "adblock more ' on my android furefox browser, but not block, he adds. What can I do?

    I have install the module "adblock more ' on my android furefox browser, but not block, he adds. What can I do? Please help me quickly.

    You should contact the https://adblockplus.org/forum/ extension

  • Impossible to install the modules that are hosted outside of AMO

    I can't install any add-on that is hosted outside of AMO, in Firefox for Android 40.0.3, nor in Firefox Beta for Android 41.

    What I think should happen: I have download the file as signed (it records to SD card), then open it with Firefox and Firefox should ask me if I want to install this module.

    What is really happening: an add-on is downloaded, but when I open it is file as with Firefox - nothing happens. Firefox comes to shows me a blank screen (see the screenshot).

    My friend has this problem too.

    Looks like a regression bug (because I could install add-ons hosted out of AMO without any problems in previous versions), but I'm not entirely sure.

    So my question is: should I file a bug on Bugzilla or is it possible to install the modules hosted outside of AMO to Firefox for Android and it's just me something wrong?

    My phone has Android v2.3.5.

    UPDATE: apparently, I can not install the modules of local files, but can do some some sites. My module (I have problem with) is hosted on Github, and I can't install it for whatever reason.

    Update 2: it seems that modules can be installed from Github if she is not just a file (because Github changed Content-Disposition of at least some types of raw file of 'inline' to 'attachment'), but a binary attachment to a "news release".

    Apparently, I found a work around for this problem, so that this issue does not require a response more.

  • How can I recover the modules and their data from a failed HARD drive (the lost BONE areas, but data files are readable)?

    The HARD drive that was my OS (Windows XP Pro SP3) failed and lost quite a few areas which are essential for the operating system running. Other data is still readable. A got another HARD drive and installed Windows XP SP2, Firefox and other programs. I was able to retrieve the bookmarks, security certificates, and other profile information using the information found in bandages.

    None of them addressed how do to recover the modules or their data. Specifically, there are several large, elegant scripts that took months to develop and customize.

    Articles related to migration and other do not work for me because they require the old copy of FF is functional, that is not because the OS on this HARD drive is damaged. Is it possible to recover these data, similar (or not) about how I could get the other profile info?

    Have you copied the entire folder C:\Documents and Settings\username \Application Data\Mozilla\Firefox\ on the old drive?
    If this is not the case, can you?
    If so, make a copy and save this folder just in case.

    If so, you could replace this folder on the new facility by \Profiles\ [with your profiles inside] folder and the profiles.ini file [delete all other files / folders that may also be in the folder "Firefox"] -and then replace with the same folder named from the old failed drive. Note that you will lose what you already have with the new installation / profile!
    Your profile folder contains all your personal data and customizations, including looking for plugins, themes, extensions and their data / customizations - but no plugins.
    But if the user logon name is different on the new facility that the former, any extension that uses an absolute path to the file in its prefs will be problems. Easily rectified, by changing the path to the file in the file prefs, js - keep the brake line formatting intact. The extensions created after the era of Firefox 2.0 or 3.0, due to changes in the 'rules' for creating extensions usually are not a problem, but some real old extensions that need only "minor" since that time can still use absolute paths - even though I have not seen myself since Firefox Firefox 3.6 or 4.0.

    View instead of 'Modules' I mentioned the 4 types of 'Modules' separately - Plugins are seen as 'Add-ons', but they are not installed in the profile [except those mislabelled as a "plugin", when they are installed via an XPI file], but rather in the operating system where Firefox 'find' through the registry.

    Note: Migration articles can tell you do not re - use the prefs.js file, due to an issue that I feel is easily fixed with a little inspection and editing. I think you can manage that my perception is that you have a small shovel in your tool box, if you encounter a problem you are able to do a little digging and fixing problems with the paths to files - once you have been warned.

    Overall, if you go Firefox 35 35 or even Firefox 34 to 35, I don't think you will run in all the problems that you can not handle [that I cross my fingers and "hope" that I'm not on what it is obvious].

    With regard to the recovery of the 'data' for individual extensions - there are many ways that extension developers used to store their data and pref. The original way should save in prefs.js or their own file RDF in the profile folder. While Firefox has been developed more, developers started using their own files in the profile folder. And because Mozilla has started using sqlite database files in Firefox 3.0, Mozilla extended their own use of sqlite, as have extension developers.
    Elegant uses the file stylish.sqlite to store 'styles', but something in the back of my mine tells me that 'the index' maybe not in this file with the data. But then again, I can be confusing myself a question I had with GreaseMonkey awhile back where I copied the gm_scripts folder in a new profile and with already installed GreaseMonkey but with no script. These GM scripts worked, but I could not see them or modify them - they do not appear in the user GM extension interface window in Firefox.

  • The add-on works with Firefox 33.0 on a single computer, but on a different computer, Firefox 33.0 indicates that the module is not compatible.

    I have a laptop and a desktop computer. Both are HP and both have recently been updated with the latest version of 8.1 and 33.0 Firefox Windows. On the desktop, Norton Toolbar still works fine. However, on the laptop, Norton Toolbar is disabled and the modules Web page has a message saying that Norton Toolbar is not compatible with Firefox 33.0. Why is this compatible on my desk, but not on my laptop?

    Hello, according to norton toolbar is already compatible with firefox versions, including the current version. Please run the norton utility liveupdate repeatedly & until all components are up-to-date. Additionally, make sure that the toolbar is enabled under firefox > addons > extension thereafter.

    For more information, please refer to https://community.norton.com/blogs/product-update-announcements/firefox-33-und-norton-toolbar

  • Do not see the module

    Installed the module https://addons.mozilla.org/en-US/firefox/addon/yandexmetrika/?src=search.
    It must be seen in the background of firefox (Panel). But there is no such Panel http://monosnap.com/image/Xupa5dobHNv93nkY2zHSUvXsgX0yDK

    Many of us use

    Restorer Classic theme (Customize Australis)

    Restore the tabs squared, appmenu, modules, small display bar icons and more on Australis UI (Windows/MacOSX/Linux + Fx 29 +).

Maybe you are looking for

  • IPhone does not accept the code to check for text messages

    II phone does not accept the code verification for the transfer of messages text imac

  • Want k010dx M6: HP Support Assistance

    The back of my laptop says windows 8.  I have successfully upgraded to windows 8.1, my HP support help worked very well. After a month or two, it has stopped working. Every time I try to open it, it says a problem caused the help stop working correct

  • dv6700 and SSD

    Hello! I have the laptop dv6837er and I want to upgrade with the new hard drive (SSD). I chose this one: SSD 2.5 ' 128 GB Plextor (PX-128M5Pro) Is it compatible with my laptop or not? Is that one of the SSD is compatible with my laptop? I ask because

  • Problem with wireless - Vista Network and Sharing Center does not recognize my connection!

    I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems.

  • calculation Manager Rules not open for HFM

    Hi, when I try to open the rules to GestionnaireCalc sound to get open and get message like going just look. Please can someone help. Thank you