Problem importing the Module knowledge

Similar Questions

• Problem with the module "Automation" in WindowsAzure

  Top: Problems with the module used "Automation" service "WindowsAzure.

  Hello!

  I really need your help to decide my problem of "Azure Automation". My boss has set a task for the 'Automation' module allows you to make a backup of Virtual Machines.

  To understand my problem, I do the next:

  1. describe the situation of all;

  2. describe the problems that appear in this situation;

  3. my conclusions.

  In addition, I am attaching the necessary information: my PS-scripts (from Windows and the automation of azure), log (with my notes) and screenshots (images with my notes) see file .rar Add_info (annex).

  1 description any situation

  For our development projects, we have several Virtual Machines on service cloud "WindowsAzure. We need to make backups of discs with Virtual Machines each week. Earlier, for this task, I used Windows PowerShell on my computer and my PS-script (see Ann 0 - VM (backup) of the WPS_snapshot). I created a new storage 'backupstor' and containing 'snaps-drive '. When I run PS-script with my computer, I have backup of disks virtual Machin in the container "snaps-disk", without problem.

  Now I have a new task "automatically make the process of creating backup of Virtual Machines (VM snapshots). I tried to use automation module (overview). Can I change my PS script for the 'Automation' module and create folders (see Ann 1 - records (make backups of virtual machines) _Azure_Automation).

  I need to make a backup of Virtual Machine 'bosard' in the cloud 'cloudnet. "Bosard" on the disc size ~ approximately 90 000 000 000 bytes (total size of the default drive size 127 GB/136 367 309 312 bytes)

  2. description of the problems that appear in this situation

  My steps:

  1. I start files to make a backup of Virtual Machine disk (see annex 1 - files (make backups of virtual machines) _Azure_Automation))

  2. it starts successfully and generate the name of backup 1 (blob) - snapshot-bosard - osdisk_07.10.2014_07h00m39s.vhd (see image 1 - start copy backup 1 and annex 2 - log file copy process)

  3. the process of backup copy 1 (blob) will...

  Problem 1:

  4. the process of backup copy 1 (see Appendix 2 - process log file copy) automatically stops and complete to copy the part 1/3 bytes copied 28311552000only. Important: The size of my virtual machine disk ~ on 90 000 000 000 bytes.  (Maximum possible) of total capacity of the disk where the Virtual Machine is used - 136 367 309 312 (127 GB). (See picture 2 - stop backup copy 1)

  5. I have Virtual size 1 backup - 28311552000bytes, when the size of my VM - 90 000 000 000 / 136 367 309 312 bytes.

  Problem 2:

  6. after the termination of the process automatically makes copy backup 1, records (see annex 1 - files (make backups of virtual machines) _Azure_Automation) automatically start (see picture 2 - stop backup copy 1) and folders automatically create new snapshot Backup 2 - name - bosard - osdisk_07.10.2014_07h31m33s.vhd (see annex 2 - process log file copy, image 3 - stop the copy backup 1 & Begin copy backup 2 and 5 - backupStore_Azure (process)of image)

  7. I pressed "stop" and stopped the process of copy and folders (picture 4 - I stopped the process of creating backup 2 & records). And how result I had size Backup 1 and 2 = 0 bytes (see image 6 - backupStore_Azure (I order records))

  Note:

  1 problem 1: the process of backup of virtual machine does not complete and stops automatically.

  2 problem 2: the process of creating new second backup starts automatically. And as a result, we do not have the backup of virtual machine, when I use the 'Automation '.

  3. my conclusions

  I think that:

  1. my PS script for Automation (files) is not correctly. Then I need your help, how to fix this.

  2 may be the module "Automation" is not working correctly. And the module 'Automation' needs repairs and settings.

  In addition, I am attaching the necessary information (see the Add_info (annex) .rar file):

  Ann WPS_snapshot 0 - VM (backup)

  Ann 1 - records (make backups of virtual machines) _Azure_Automation

  Ann 2 - log file copy process

  image 1 - start the copy backup 1

  image 2 - stop copy backup 1

  image 3 - stop copy backup 1 & Begin copy backup 2

  4. I stopped the image create backup processes 2 & records

  image 5 - backupStore_Azure (process)

  image 6 - backupStore_Azure (I order records)

  Thank you

  Kind regards

  Mikhail

  Hello

  You can get the assisted support from the following link on this point:.

  http://azure.Microsoft.com/en-us/support/options/

• KB952287 is a problem with the module installer and will not install, error code 800706BE

  Hi, I have a laptop Dell Inspiron 1520 with Vista Home Premium. I'm having problems installing SP1 and have identified that one KB952287 that causes the problem. The update causes exactly the same problem. While installing the update, an error message appears that says "Module of Windows Installer has stopped working and needs to close", then the updater freezes and never completed the update. The update log provides the following information.
  
  Fix for Windows (KB952287-french)

  Installation date:? 03 /? 04 /? 2009 20:06

  Installation status: failed

  Error details: Code 800706BE

  Update type: Important

  Difficulty for KB952287

  More information:
  http://support.microsoft.com/?kbid=952287 .

  I've contacted Microsoft Support on this issue and they could not help but suggest to post here.

  Thanks in advance for any help.

  If you don't want to go in this direction, you should call dell and ask for a replacement recovery media.

  And maybe ask a copy directly from the operating system without any OEM software or all the changed settings. (a copy of the DVD retail)
  See you soon

  Today, it was a good day, I didn't have to use my AK.

• MODIFICATION OF THE MODULE KNOWLEDGE

  Hi gurus,

  Is it compulsory to learn how to change the ODI knowledge modules?

  or I can handle work ODI with the help of the forums if I want to change the knowledge modules?

  Thanks in advance.

  Ganga

  You can work and do almost everything with the KMs in what they are. The thing is, any time if change you it a little, you will much more to it.

  For example, if you work with version 11 or less, you should change your KMs to set single step, in this way you can run at the same time any integration. To do this, you need only to add a step in the KMs and slightly change your topology.

  Have a look here:

  http://odiexperts.com/interface-parallel-execution-a-new-solution/

  If you work with Hyperion Planning, you will have to reverse all of your applications and planning for each dimension, you will have a data store. But in the most part, the dimension between the Apps have the same configuration (only with different members), then if you change the KM a little you can loop and change the soft dynamically, making your package have much fewer interfaces, and you have a lot less work to develop.

  10 things to improve the ODI integrations with Hyperion Planning part 1 (the Application loop) | EMP DEV

  If you want something a little more advanced, you can change you KM instead of use a store of data (from the opposite), you can build dynamic store for your data inside your KM:

  10 things to improve the ODI integrations with Hyperion Planning part 8 (building planning DataStore). EMP DEV

  You can create steps to check if a partition exists in a table and create so Don't;

  create a validation inside the the tieout KM data you load (such as a sum or an account to the source or target)

  What I mean is, if you change your KMs you will have a lot of less work and much more power.

  And don't worry, most of the changes are very simple, simply use the API of the ODI (and you can find inside the ODI, all possible alternative methods, just to see each one you need to use and google for possible settings)

  and you need to try it.

  Duplicate an original KM (always duplicate the KMs, never start from scratch)

  Think about your problem and how you can solve it

  Look in the API

  And that's all. Is not difficult, I can garanthee.

  And how do you know that you need to change a KM? Very easy, whenever you need to do more than a simple interface that allows you to do something, or when you need to do something in the middle of an interface (as you want to create a partition, because a new value can come in new data).

  Hope this can help you.

• Problem in the module ReCaptcha.

  

  The problem is the following: when the contact module is empty all States are also the same. What can I do?

  Thank you

  Bug. I'll write it upward to be set for a later version.

  To avoid it you want or need to switch to the use of a police police Web or Web safe for this text and not a system font.

  In general (for any text on the web) you must use Web fonts whenever possible and only fall back to use a Web safe font or the police System when no acceptable Web font cannot be found to be acquired.

  Use a system font will result in the block of text to be converted to a picture. Each image on a website is a separate file to download from the server. A page with several blocks of text labels/text that everyone uses a system font will be so poor some net connections page load performance. A Web font has this problem, because the police is downloaded one time.

• problem: import the image sequence into adobe media encoder

  Hello

  have a problem with adobe media encoder CS6, change the display Format to 25 time frame in the preferences of media coder, I import a series of TGA (170 images) to media encoder in an image file TGA sequence, the series generated from 3D applications Max and ToonBoom, specification of TGA series 1080 50i "1920 X 1080 - high filed - 25 frames per second. When I import the sequence, encode media recognize the sequence as 1920 X 1080 - progressive - 29.97 FPS, to interpret the window images options I change the settings of the upper sequence deposited - 25 fps, and I export to quicktime mov 1920 X 1080 - class top - 25 fps uncompressed

  the problem:

  mov file is 06:20 and it is right for the 170 25 fps calendar but mov file does not contain the tga series image, image freeze in time code 05:16 (number 142 of the framework) and duplicate the 142 image to the rest of the video file

  If I do not change the pace to interpret the window options images for the tga sequence what media encoder recognizes as 29.97 FPS mov file contain all TGA images, but with a duration of 05:16 which not 25 fps

  in adobe media encoder CS5.5 I don't get this problem at all

  1. How do I solve this problem?

  2. how to force CS6 adobe media encoder to recognize the image sequence imported as rate of 25 fps?

  Windows 7 Ultimate SP1, Adobe Creative Suite Master Collection CS6

  Thank you

  Post edited by: yas1amin1mah

  "Film" is finally fixed in November 2013 video updates of creative cloud. If your version of Premiere Pro and SOUL is or more 7.1.0 everything should work as expected. But don't forget to actually perform "Film" on your source in first Pro CC or CC SOUL that, otherwise your sequence of images will continue to be interpreted as 29.97 FPS by default.

• Strange problem with the module memory series Satellite Pro 4300

  I have a laptop Toshiba satellite pro 4300 series with 64 MB onboard + 64 MB Module and I want to upgrade my memory to 320 MB. I bought two ram of 128 MB each. I removed the 64 MB module and I put a 128 MB module into the slot (A) one, but I saw that the total memory is 128 MB again.

  I removed the module again and I put the second module in the connector (A), but I saw that the total memory is 128 MB again. After that, I put the two modules in my notebook (Slot A and slot B) but I see that the total memory is 192 MB. This means that it recognizes each module as 64 MB as opposed to 128 MB. Dose anyone know why this happens?
  And what do I do about it?

  Thank you.
  [email protected]

  Hello

  Well, I put t know why this happens. It seems that the 128 MB modules are 64 MB modules. I know that it of strange but I have only this explanation. You are 100% sure that both modules of memory 128 MB?
  In my opinion, you should check the bars of memory if they have 128 MB.

  Good bye

• Problems importing the files from an SD card to iMovie

  After I have import files from an SD card to version 10.1.1 iMovie I have a problem when I eject the SD card then some of the files show just like a question mark (?) and some of the files are saved. I've never had this happen before that I can remember. I was just curious to know if maybe I do some thing wrong, or if there is a problem with iMovie.

  ! 0.11.4 OSX El Capitan.

  iMac late 2012

  Looks like you may have ejected from the SD card until all files have been copied to iMovie.  In fact I never use import to all but drag and drop files directly from the SD card mounted to an iMovie event.  This way an id that the files were transferred.

  Geoff.

• Lightroom 5.0 on Windows 7 - problem in the Module Photo caption book

  Using Lightroom 5.0 on Windows 7, I produced a 76 page book in the book Module with multiple photos on most of the pages, but two photos showed not their captions and do not even print a PDF proof print run. I had the photo captions in the metadata, but subsequently entered the legend of the relevant picture via text custom from the left panel and also directly in the legend of unsuccessfully photo printing area. I changed the size of the picture, without success, but when I did an automatic photo cell fill, legend appeared in the photo, but disappeared when the sizing has been cut back. I've exhausted all the possibilities of help at this point.

  I use Lightroom 5 because I didn't upgrade while in the middle of this great exercise. As I have a PDF version on a USB key, now that I have almost completed the task, maybe upgrade to 5.7 could solve the problem, if it's a bug in 5.0. My intention is to have an impression through Blurb.

• Problem importing the chapters 'empty' (with the titles only)

  Hi all

  in this project to import all title formats lead to topic splits. However, whenever there is a chapter in Framemaker which has no text content, Robohelp does not create separate topics and packs two title lines in a topic. They are both bound to the table of contents via bookmarks. The result in the online help are two entries of table of contents with apparently identical content (alltough is in fact still subject being referenced twice).

  I know that the empty chapters like this are bad style, but it would be no problem to receive simply correspondent subject empty because they will be never displayed by a call context.

  Is it possible to force Robohelp to apply the theme split of such rules as defined in the import settings, even if a subject resulting will be empty?

  Robert

  

  Refer to my first suggestion above...

  1. Create a paragraph whose content is:
     "This paragraph will never shown.
  2. Then apply a conditional text style in FrameMaker. Use the print of the existing online, comment styles, or create your own. It does not matter.
  3. Copy this paragraph and paste it after any place where you want to remove the problem that exists between 4.1 and 4.1.1
  4. Update your HR project
  5. Set your page layout to single Source to exclude the State applied to step 2
  6. Process your file
  7. Mark this as Correct comment to help others to find and fix this!

  Best,

  Matt

• Problems with the module supplier of personalized identification information and overview of VMware View Client working together

  I have a Horizon of VMware View client that connects me HVD Windows 7. So when I give view client Vmware Horizon my credentials, it auto logs me. I also created a custom credential provider that works on Windows 7 PC. When I install the custom in the HVD credentials provider, it works if I am already connected to HVD and I simulate CTRL + ALT + DELETE. Can I use my credential provider to "unlock" in. However, if I disconnect of HVD and try to connect using VMware Horizon View client to connect to Windows 7 of HVD, it gets stuck on the screen of the tile. I see the VMware SSO user tile but nothing happens when I click it. Then, I use my provider of customized credentials to connect. I expect to bypass my ISP credentials on the first connection and self as before.

  Anyone have any ideas?

  Thanks for your help.

  OK, I did some more troubleshooting and discovered that it was a problem with auto connection set to TRUE on my side of custom credentials provider (I pbAutoLogonWithDefault to TRUE). Since I still like it TRUE, I had originally set it to FALSE and then change for REAL once my credential provider was used.

  Thank you!

• using the module knowledge Oracle LKM to Oracle (DBLINK)

  Hello
  
  I use in an interface the LKM oracle to oracle (dblink) because my store of data source and target are oracle. I run my interface, but the operator gives me the following error:
  
  1729: 42000: java.sql.SQLException: ORA-01729: database link name EXPECTED
  
  In the descriptions, there is this implementation:
  
  create the database link
  connect to applications
  identified by < @= snpRef.getInfo ("SRC_PASS") @ >
  using the "
  
  So it seems that it does not create the database link, also if I put the AUTO_CREATE_DB_LINK Yes!
  
  Why? Can someone help me? How can I set the database link?
  
  Thank you

  Hello

  go to your physical server and put the name of DBLink on the box corresponding to the first edit window...

  This help you?

• can not see the default knowledge module

  Hi guru
  
  I don't get the module knowledge when I try to import.
  What is the problem. Help, please.
  
  Thank you

  Please go
  \oracledi\xml-reference
  Example \Oracle\11.1.1\Middleware\ORAODI\oracledi\xml-reference

  All the present KM inside xml-reference.

  Thank you

• Configure the module of firepower ASA IP address

  Hello

  today I tried to configure the IP address of the late ASA power module. But unfortunately I failed. The firewall is in the direction of the situation and also do have not any router on the LAN. So, I stop the management interface and configure the IP of firepower on the network server management. But unfortunately I can not ping the gateway IP address that is actually one of the interface of the firewall. It is the series x 5525 firewall. So this isn't a any interface dedicated to management of firepower. It would be nice to know where I made the mistake? I recharge and recovery of the module and I consider the State as always state of recovery. So my question is looking for there is a problem with the module itself?

  Module status

  SH module

  Model serial number of map mod
  ---- -------------------------------------------- ------------------ -----------
  0 ASA 5525 - X with SW, GE, 1 GE Mgmt, AC 8 data
  IPS unknown n/a
  cxsc unknown n/a
  SFR unknown n/a

  MAC mod Fw Sw Version Version Version Hw address range
  ---- --------------------------------- ------------ ------------ ---------------
  0 f  1.0                                                2.1(9)8      9.2(3)
  ips                                                         N/A          N/A
  cxsc                                                       N/A          N/A
  sfr                                                         N/A          N/A

  The Application name of the SSM status Version of the Application of SSM mod
  ---- ------------------------------ ---------------- --------------------------
  IPS unknown current Image number does not apply
  cxsc unknown No. current Image does not apply

  Data on the State of mod aircraft compatibility status
  ---- ------------------ --------------------- -------------
  0 to Sys does not apply
  IPS does not is not Applicable
  cxsc does not not Applicable
  SFR recover not Applicable

  Config firewall Interface

  #Interface IP-Address OK? Method State Protocol
  GigabitEthernet0/0 10.101.106.115 YES CONFIG upward upwards
  GigabitEthernet0/1 10.106.106.115 YES CONFIG upward upwards
  GigabitEthernet0/2 10.103.254.254 YES CONFIG upward upwards
  GigabitEthernet0/3 10.0.210.254 YES CONFIG upward upwards
  GigabitEthernet0/4 10.100.254.254 YES CONFIG upward upwards
  GigabitEthernet0/5 10.107.253.115 YES CONFIG upward upwards

  #interface GigabitEthernet0/1
  Speed 1000
  full duplex
  nameif Server
  security-level 70
  IP 10.106.106.115 255.255.0.0

  Fire power management configuration

  Host name: 1 Swiss francs
  Configuration Management Interface

  Configuration IPv4: static
  IP address: 10.106.251.253
  Network mask: 255.255.0.0
  Gateway: 10.106.106.115

  IPv6 configuration: Stateless autoconfiguration

  Configuration of DNS:
  Domain: XXX.local
  Search:
  XXX.local
  DNS server:
  10.101.251.2
  10.201.251.2

  Any help will be greatly appreciated.

  Thank you

  Sari

  Sari,

  Even if there is not a physical module services fire power management port, it uses Management0/0 port to connect to the module of SFR.  If you like on the same VLAN as your server VLAN on the SAA plug Management0/0 port on a switch that is sharing the network server VLAN and give the module SFR an IP address on the same subnet.

  Make sure that you remove the statement under interface Management0/0 nameif. Here is an example:

  interface Management0/0
  management only
  No nameif
  security-level 100
  no ip address

• problem in the import module

  I recently had Flex Builder 2.0.1 and test the functionality of the module of it. However, I am intrigued by the import in the module.
  
  When I create an application and a loading module. All of them need to import user interface controls such as mx.control.RichTextEditor. I had to import the class in each of them so that they are able to compile. But in this condition, the size of them both large enough to import user interface both controls. It seems difficult to understand why adobe do this. Does anyone have a good solution? Thank you!

  Thank you very much, Tim!

  I got the answer in the Adobe document (^_^)

  Controls the size of the module:

  The module size varies according to the components and classes that are used in the module. By default, a module includes all the code framework that rely on its components, causing modules to be great by categories that overlap with the application classes.

  To reduce the size of the modules, you can specify the module to outsource classes that are defined by the application. This includes custom classes and classes framework. The result is that the module includes only the classes that it requires, while the infrastructure code and other dependencies are included in the application.

  Outsource the framework classes, you generate a report of the linker of the application that loads the modules, using mxmlc command. Then use this report as input into the external load-trainees module compiler option.

  To create a report of the linker:
  The report of the linker: mxmlc-link-report = report.xml MyApplication.mxml

  Compile the application SWF file:mxmlc MyApplication.mxml

  Compile the module: mxmlc-load-over-reliance = MyModule.mxml report.xml