Modification of VSM monitor source query?

Similar Questions

• Monitor source from the time not zero

  Hi guys,.

  I have not used the Premiere Pro in a while and I'm a bit of a beginner.

  I imported a whole lot of clips, MOV and MP4. Whenever I open a MOV file in the monitor Source window, the departure time is something random (like 11 hours). I'm put together a short documentary for a friend, and he wants me to cut the clips based on time, so of course that's not ideal because I can't go to a specific timecode. I tried to drag a clip at a time without success.

  The only thing I can think is that the clips were shot in a sequence (or something), and therefore it is the metadata reading incorrectly. This was shot with a camera of Blackmagic.

  Is this a PR bug or have anything to do with the way the project has been implemented? I am at a loss.

  Any advice?

  Hey Cogito,

  Please, try the following steps:

  • Right-click on your clip (in the project).
  • Choose Edit > timecode.
  • And manually reset the timecode from scratch, or you can set it to a value.

  

  

  Thank you

  Ilyes Singh

• Watching a film layer on customer monitor Source?

  Hi guys,.

  I am using a Blackmagic Ultrastudio Express via Thunderbolt with the latest creation. While I didn't quite show stopping issues using it with my client monitor when you view a cut on the timeline, is there a way I can show on the client monitor source footage?

  I know that I could create a sequence of temp, but I'd like to skip this step.

  Is this a missing feature? I should have make a request?

  Thank you very much!

  Michael

  UPDATE: I called Adobe support and after reading that they trashed my user/first config prefs, worked.

• You can activate the monitor source upside down?

  We shoot a lot to the gimbal. Upright, you have images upside down. Our eyes and brain are crazy. Is it possible to pass the images in the monitor source of upside down to normal?

  Use the master Clip (vertical flip and horizontal flip).

  Adobe Premiere Pro help. Master Clip effects

• View of ExternalMonitor of the 'monitor Source' to "The program monitor" switch?

  It worked well in CS6, but I went to first CC and my external monitor is displayed the contents of the 'monitor Source' of first only, not "the program monitor. When the monitor of the timeline or program is selected, the extrenal monitor is black. But slecting monitor Source plays very well on the moitor extrenal (via SDI connection)

  How to switch to display the signal from the program monitor my external monitor rather than the Source monitor?

  Configuration of the Tech: using Blackmagic ultrastudio mini monitor to send the SDI signal. Installing the latest driver for the Blackmagic ultrastudio, approved for Adobe CC everything works perfectly in first CS6, it is a question within the first CC.

  Thank you!

  Change the fields option in the settings of the sequence to 'No fields (progressive scan)' fixed.

  Thank you!!!

• MRM - 'monitor source address is not configured "?

  Greetings,

  I try to use MRM, but the "manager" doesn't seem to know its source, despite the research address as it does.

  I tried several source interfaces.

  Mrm - ip TEST Manager

  Serial0/0.1 225.0.0.1 Workgroup Manager

  senders 1

  2 receptors

  -----------------------------------------

  R3 #sh ip mrm manager TEST

  Manager:test/1.0.0.1 is not running

  Beacon interval/holdtime / ttl:60/86400/32

  Group: 225.0.0.1, UDP port test-package/status-report: 16384 / 65535

  Test mailers:

  5.5.5.5

  Receivers of tests:

  1.1.1.1

  -----------------------------------------

  R3 #mrm TEST start

  Source monitor address is not configured

  -----------------------------------------

  ???!!!! Another interface (loopback)

  -----------------------------------------

  R3 #sh ip mrm manager TEST

  Manager:test/3.3.3.3 is not running

  Beacon interval/holdtime / ttl:5/86400/32

  Group: 239.0.0.1, UDP port test-package/status-report: 50000 / 50001

  Test mailers:

  5.5.5.5

  Receivers of tests:

  1.1.1.1

  R3 #mrm TEST start

  Source monitor address is not configured

  -----------------------------------------

  I tried this on various 3640 s running enterprise 12.3 and a 12.2 (32) running of 2500. All have the same result.

  You missed this command, I think.

  "R1(config-mrm-manager) # 2 sender-list of recipients 1.

  While the Cisco IOS CLI parser accepts the command entered without the pair of keywords-argument access-list-list of senders, this pair of keyword-argument is not optional. For a test MRM work, you must specify the sources that the Test receiver should monitor using the sender-list of keyword argument and access list.

  This should solve the problem.

  HTH-Cheers,

  Swaroop

  ========================================

  ]

  R1 #sh ip mrm in

  R1 #sh ip interface of mrm

  State of the address of the interface Mode

  FastEthernet0/0 10.1.1.1 - receiver to Test upward

  R1 #mrm TEST1?

  start the start IP MRM test

  stop the test to stop IP MRM

  R1 #mrm TEST1 beginning

  R1 #mrm TEST1 beginning

  R1 #.

  R1 #.

  R1 #sh

  00:06:23: test of IP MRM 'TEST1' begins...

  % Of type 'show?' for a list of subcommands

  R1 #.

  R1 #.

  R1 #.

  R1 #sh ip Manager mrm

  Manager:Test1/10.1.2.1 is running, expiration: 1d00h

  Beacon interval/holdtime / ttl:60/86400/32

  Group: 239.1.1.1, UDP port test-package/status-report: 16384 / 65535

  Test mailers:

  10.1.1.2 n - Ack

  Receivers of tests:

  10.1.2.2 n - Ack

  R1 #sh ip Manager mrm

  Manager:Test1/10.1.2.1 is running, expiration: 1d00h

  Beacon interval/holdtime / ttl:60/86400/32

  Group: 239.1.1.1, UDP port test-package/status-report: 16384 / 65535

  Test mailers:

  10.1.1.2 n - Ack

  Receivers of tests:

  10.1.2.2 n - Ack

  R1 #.

  !

  Manager of mrm IP TEST1

  Manager group 239.1.1.1 FastEthernet1/0

  senders 1

  receivers 2-list 1

  !

  access-list 1 permit 10.1.1.2

  access-list 2 allow 10.1.2.2

  !

  !

  R1 #sh cdp nei

  Ability code: R - router, T - bridge Trans, B - road Source bridge

  S - switch, H - host, I - IGMP, r - Repeater

  Device ID Local Intrfce Holdtme Port platform capability ID

  R2 Fas 0/0 135 R 3620 Fas 0/0

  R3 Fas 1/0 172 R 3620 Fas 0/0

  R1 #.

  R1 #.

  R1 #sh ip int brie

  Interface IP-Address OK? Method status Prot

  Commissioner of official languages

  10.1.1.1 FastEthernet0/0 YES manual up up

  10.1.2.1 FastEthernet1/0 YES manual up up

  Loopback0 1.1.1.1 YES manual up up

  R1 #.

  ----------------------------

• cannot drag the video image on the monitor source on timeline

  I worked a few years with Premiere Pro (now CC) and this never happened to me before.

  I can not move the source to the timeline monitor video. What is going on? The sound can be moved, but there is a hand with a 'no sign' of the video? How can I fix this without start again?

  You source patch the track?

  

• Monitors/Source program that displays a single vertical black bar on image

  I use first Pro CC, with all the latest updates etc.  I just started a new project, and I have a rather strange problem with the window the program monitor.  Essentially, when you view the final image, the last item in the order given, about 1/8 of the image on the right side in the program monitor window is obscured by a vertical black stripe.

  If for example, I put three clips in a sequence all on the same video track, but do not join them together (I purposely leave a space).  If I find the last frame of the first two clips, there is no problem, it is never the last frame of the sequence.

  If I find a clip in the Source monitor, the same black bar appears on the last frame of the clip seen in the same way as the program window.

  I'm baffled by this one.  I can't think any setting I have accidentally enabled which could even hint to this behavior.

  Final result is not compromised, by the way, watch just a clips as I work.

  The ideas people?

  Steve

  This is a new feature introduced in the last update.

  When the playback head past the last image of media on the Timeline, and after that, there is no cutting

  a black box appears along the right edge of the last frame of a clip or sequence.

  The end of support indicator is always on and appears for multimedia clips in the program monitor,

  The source monitor and the video area of the project Panel.

• Monitor source and the stopped program monitor display anything

  Hey there,

  I am a user of CS6 Production Premium and serious difficulties here: I'm working on a large 1080 p AVC-Intra50 project for a client who is scheduled next Monday. I am close to completion, but a couple of days, the arrested source video display monitor. It would still show a that I loaded into a clip, but as soon as I have read, the source monitor just went black. The clip played well and you can listen to. Not as big problem, I thought and simply used the program for playback monitor. But yesterday, it's the same thing with the instructor of the program as well. But not only: even the stills have now disappeared. Both monitors remain dark permanently, even if playback and the sound still work. So I'm curious and I tried different materials and different projects: JPEG, AVCHD, DNxHD files, even, nothing shows up on two monitors, regardless of the resolution. Yet, everything works fine on my laptop.

  Then I completely uninstalled all of the Creative Suite, used the Clean Script several times, including reboots, deleted all the files of the remaining user and windows directories and updated all my hardware to the latest drivers. Nothing. Both monitors remain black and useless. Not changed anything to my configuration of Adobe, nor my hardware or software configuration while this error occurred. I searched the web for hours and I'm completely at the end of my mind. Any suggestions?

  My system:

  Windows 7 x 64

  Intel Core i7 2600 k

  8 GB RAM

  ATi 6870

  BTW: I had to reinstall Windows. Which corrects the problem. Seems to be a weird problem of Adobe vs Windows deep inside the system.

• My monitor does not match my monitor source. HELP Please!

  .

  How can I get my reference monitor to match with my source monitor?

  Thanks for the help guys!

  It seems that you have chosen the wrong sequence preset.

  CTRL-click on any clip in your project Panel and choose > new sequence of the Clip.

  Who will establish the parameters of the order appropriate for you.

• Data source query problem

  Anyone know how to access an xml using this type of query:

  query: "" /something: here/list/Articles ""

  and the xml code is like this:

  If I replace ' something: here "to anything and do the same thing in the xml file, everything works.

  I have tryied encoding ': ' % 3 but nothing happens.

  any advice? Sorry if my description sucks

  a bit of luck again?

• Program and monitors Source glitch

  Someone had this problem when they are arrested at the same time source and menu of the program is messed up, but sometimes very well.

  

  Hi Jeremy,.

  It comes across in forums.

  Just change the rendering on "Mercury Playback Engine software" only engine file/project settings/general.

  Check more about this post: Heads up on first with El Capitan

  Kind regards

  Navdeep Pandey

• all the buttons work only not on the monitor source except the space bar

  I just downloaded a trial of adobe first cc 2015 but unable to do all the regular stuff in my source window. all buttons are unresponsive except the space bar (it will play the file). I can also drag the video in the timeline, but still unable to make other edits using the buttons... any ideas anyone?

  Try this:

  Restart your computer, hold down the shift + alt key while opening the first up to the Welcome screen.

• Code monitoring source timecode

  Is there a way to monitor the time code of an element used in the timeline, without using the timecode effect?

  What do you mean by monitor? Do appear in the video? Not that I know of...

• Beginner problem - monitor Source plays audio but no video

  Hope someone can help me with this. I use CS4 for a little over a year with few problems.  The last time that I used something messed up because now any video can I import into body, when I play the video in audio playback Souurce monitor but the screen stays black and when I play the video in the monitor of the program, it's like looking through a colorful film.  I have another computer next to me with the agency that plays the same files very well.  I checked all the settings I can think to pair with the functional computer and can not see any differences.

  Any suggestion would be appreciated.

  Here is the problem machine.

  

  This is what looks like the right machine - then there is nothing wrong with the video file:

  

  Welcome to the forum.

  That-screenshots looks like a video driver issue. It probably wasn't something you did, at least not directly. A lot of things that can make an outdated video driver are in the background, like a simple OS, or hot - fix update. It allows to these, and usually good as they should. However, PrPro if interface with the video driver, more than most of the programs, and if everything is not 100%, problems can occur. Other programs do not have this close an interface and never have any problems or complain.

  Take a look at this THREAD, because there are a lot of similar questions in the different links.

  I would go first to the mfgr of the video card. Web site and download and install the latest driver. Be sure to read the installation instructions, such as those that can change from pilot to pilot. Usually, it is just a simple executable file, but in some cases, the user must do some things first - just check this version.

  Good luck

  Hunt