Module ODI knowledge - the evil task order

Similar Questions

• ODI-1228: SrcSet0 (load) task fails on the target of ORACLE EBS_ connection

  Hello
  
  I'm integrating bulk data from one database to another DB, when I run the data in another DB all the success, but I am unable to see the result in another DB.so I checked in the operation tab I can see some belligerents message here.
  
  
  warnning:
  
  ODI-1228: SrcSet0 (load) task fails on the connection target ORACLE EBS_Customers.
  Caused by: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
  
  
  someone please you suggest on this.
  
  
  Kind regards
  Anil

  Hello

  There is really little detail, but if you work on eBS I suspect you're pointing the synonymous or something similar.

  Go to step "Create table of work." What do you see? Get the name and try will refuse this table exists

  Let us know

• on the use of the global task

  Hello

  I've been using labview 7 for a long time and I haven't used task. Recently, I've introduced to CVI and I have created all the need for tasks at the launch of the application and reuse tasks before the end of the application. Last week, I received a copy of labview 2013 and I am porting the old code labview for 2013. However, I ran into a problem. Different compiled C code, this code vi must be run each time when necessary, if I create the task on the fly in the vi, it is quite heavy. I would like to create the global tasks so it could be used anywhere, anytime. The example contained in the regulations says that I could create these tasks in MAX. So my question is to use the task only did I specify the name of the task (created in MAX) as the IO channel to use?

  Furthermore, if I create a global task, do I have to delete the task at the end of the application? If I delete the task, global task disappears from the MAX or not?

  Finally, I wonder if it is possible for more than one vi using the same task in different times? For example, I created a global task for the analog output. I run two vi, A and B. A, he use the task to an analogue voltage output while B is something else. After that was done, B uses the same task for another exit. They come in conflict somewhat? What happens if both A and B call the same task at the same time?

  dragondriver wrote:
  

  ...

  Thanks for the clarification. So it doesn't work if I create two tasks the two links on the same channel and I call these two tasks at the same time, right?

  Time to dig the DAQmx help file and check in the DAQmx state transition table.

  Any number of tasks can be created (any reasonable number).

  If all this stuff is sane the task can be verified (if he calls nonexistent DAQmx hardware raises an error and the task cannot be verified)

  If all resources are available (clocks, roads, channels) can be "reserved" (committed) if something else has booked all the resources the task cannot be initiated and DAQmx generates an error.

  In order to have multiple tasks that use the same chanel is perfectly fine, BUT only one can be in one State other than "Verified" use control Task.vi to explicitly states the task of transition.

• Outbreak of the AO tasks with digital triggering

  I'm triggering an analog using a digital triggering (PFI0) task on a NOR-6343 (USB), but don't see the behavior desired of my VI (see screenshot).

  * When I shoot digital triggering (digitalTrigger = False), the AO signals appear planned (except that... they do not fire).

  * When I turn on the trigger (digitalTrigger = True), however, there is no signal on the channels of the AO.

  * I tried two different sources: PFI0 and the clock internal (set both rising edge). For the PFI0 channel, I connected a function with a wave generator square 5 v (the PFI0 had a slow rise... time "I think I could solve this problem by adding a small circuit of buffering). However, I expect it should work correctly using the internal clock as a trigger.

  What's wrong with my code / setup?

  A few follow-up questions:

  * This will trigger the installation program not start indicator AO once? Or the trigger will cause the task to start whenever the finished AO signal and the trigger goes high? (I wish that it behaves like the latter)
  * Just to check: the response rate of the AO task to the digital trigger should be of the order of 1 MHz?

  Hello kllurie,

  What do you use the trigger for? The way you have the task to put in place now, it will run continuously until you press the STOP button and ignore any input trigger. If you want to be able to have the task to complete and start over with a digital triggering, you make the task two finishes and Retriggerable. You can configure the task to be finished by replacing the constant continuous samples on the Timing.vi with finished samples and giving him a number of samples to be taken before stopping. Then you can do the task Retriggerable using the property trigger DAQmx node and choosing Start > more > Retriggerable sometime before the Start.vi.

  As to what it should be used as your relaxation, you'll want something with a fast rise time (so that it is detected as a numerical advantage) and is not as fast as the sample clock. If you use the sample as your trigger clock, there would be essentially no difference between your redeclenchables task and a continuous. It would end the collection of samples and then immediately redeclenchee.

  Let me know if that answers your questions!

• Error message: the selected task "{0}" no longer exists. to view the current task, click Refresh

  When I go to start Task Scheduler, I get this message "the selected task"{0}"no longer exists. to see the current tasks, click Refresh"so I go ahead and click on refresh and get the same error message. How can I solve this problem? Any help and any help would be greatly appreciated. Thank you!

  I spent a few minutes and tracked down the problem and a solution. This is a result of work files that exist in the tasks folders that do not have access to (probably) in the registry. Here's how I worked through the issue - will take time, but it has cleared up the problem completely for me:

  1. Open the Task Scheduler, and then click OK when you are prompted with the error. It may seem that you receive again and again the same error, but it is really because of the number of tasks that are broken. Make a note of the number of times that you are prompted by the error of the selected task '{0} '. This is the number of work files that are out of sync with the registry.
  2. Start with the first folder under Windows tasks (Task Scheduler (Local) \Task Scheduler Library\Microsoft\Windows), and then select each file in turn until you receive the error of the selected task '{0} '. This folder contains files that are not synchronized with the Task Scheduler.
  3. Open Windows Explorer and navigate to the folder of tasks (% SystemFolder%\Tasks\Microsoft\Windows) and look for the folder that corresponds to the folder in which you received the error.
  4. For some tasks, you will be able to determine which files need to be removed by comparing the list in the Task Scheduler with the list of files in the Explorer. Some tasks will be only one file in the Explorer, or, in one case, I had 2 and the first was absent. Once Task Scheduler encounters this error is no longer display the tasks so he does the work to get the two in sync a little harder. Once you have determined which files exist in the folder of files but do not exist in the folder of the Task Scheduler, remove these files.
  5. IMPORTANT - close and re-open the Task Scheduler. Once the error, Task Scheduler no longer displays the missions you have to close and restart in order to continue your effort of synchronization.
  6. Continue to select folders in the Task Scheduler under Windows taskbar until you encounter the error once again and repeat the process of determining which file exists on the file system, but not in the Task Scheduler.

  I had 6 files that were at odds with what was shown in the Task Scheduler. Once I deleted all the incriminated files, task scheduler has pulled up without problem.

  Good luck.

• Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete.

  Original title: CD corrupts and burn it

  When I go to burn a cd with the music on this topic in windows media player, it starts very well. When it gets to 70-80% it stops and a window opens with this message.

  "Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. »

  There is nothing burn but these files. I made sure there was nothing waiting to be burned. I closed all the other windows. I lowered the speed at which it burns. Nothing works I've looked up online. WMP is updated too.

  I can burn files very well. Photos and documents, I have a problem with. It cannot therefore the CD burner (not completely, anyway). I can listen to the songs on the CD where it suddenly stops.

  If anyone has had this problem, a solution would be greatly appreciated.

  Thank you

  Hi Cory,.

  This problem can also occur when your computer correctly detects the disc as a non-recordable device. Make sure that the registry key is set correctly for DVD player.

  CD - R or CD - RW drive is not recognized as a recordable device (valid also for Windows 7 steps)

  http://support.Microsoft.com/kb/316529/en-us

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756/en-us

  How to back up and restore the registry in Windows

  I hope this helps.

• ODI-1226: Error_log_procedure step fails after 1 attempt. ODI-1232: the execution of the procedure error_log_procedure failed. ODI-1246: the logical schema has not been defined for error_log_procedure.

  I created a procedure running during the mapping fails but I am facing this error

  ODI-1226: Error_log_procedure step fails after 1 attempt.

  ODI-1232: the execution of the procedure error_log_procedure failed.

  ODI-1246: the logical schema has not been defined for error_log_procedure.

  at oracle.odi.runtime.agent.execution.AbstractSessionTask.getCollectDwgConnectConnection(AbstractSessionTask.java:754)

  at oracle.odi.runtime.agent.execution.AbstractSessionTask.getCollectDwgConnectConnection(AbstractSessionTask.java:730)

  at oracle.odi.runtime.agent.execution.SessionTask.getExecutor(SessionTask.java:239)

  at oracle.odi.runtime.agent.execution.SessionTask.processTask(SessionTask.java:152)

  at oracle.odi.runtime.agent.execution.SessionTask.doExecuteTask(SessionTask.java:111)

  at oracle.odi.runtime.agent.execution.AbstractSessionTask.execute(AbstractSessionTask.java:864)

  to oracle.odi.runtime.agent.execution.SessionExecutor$ SerialTrain.runTasks (SessionExecutor.java:2024)

  at oracle.odi.runtime.agent.execution.SessionExecutor.executeSession(SessionExecutor.java:562)

  to oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor$ 1.doAction(TaskExecutorAgentRequestProcessor.java:718)

  to oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor$ 1.doAction(TaskExecutorAgentRequestProcessor.java:611)

  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:203)

  at oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor.doProcessStartAgentTask(TaskExecutorAgentRequestProcessor.java:800)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 1400 (StartSessRequestProcessor.java:74)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:702)

  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:180)

  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:108)

  to java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:471)

  at oracle.odi.runtime.agent.execution.job.OdiJob.call(OdiJob.java:73)

  at oracle.odi.runtime.agent.execution.job.OdiJob.call(OdiJob.java:73)

  at java.util.concurrent.FutureTask.run(FutureTask.java:262)

  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:615)

  at java.lang.Thread.run(Thread.java:724)

  Navigate to the ODI object with the name error_log_procedure , which I assume is an ODI procedure. On the target tab (and if this source) make sure that you have specified a logical schema in the appropriate drop-down box

• Questions of 12 ODI (after the migration of 11.1.1.7)

  I had a lot of problems after upgrading 11.1.1.7 to 12.1.3 ODI.

  Principal of it is:

  (1) is unable to load the metadata in planning, using IKM SQL for Hyperion Planning and _MEMORY_ENGINE_STAGING of the SUNOPSIS staging area

  ODI-1590: the execution of the script failed.

  Caused by: org.apache.bsf.BSFException: exception of Jython:

  Traceback (most recent call changed):

  File "< string >", line 16, < module >

  at org.hsqldb.jdbc.Util.sqlException (unknown Source)

  at org.hsqldb.jdbc.JDBCStatement.fetchResult (unknown Source)

  at org.hsqldb.jdbc.JDBCStatement.executeQuery (unknown Source)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:606)

  java.sql.SQLException: java.sql.SQLException: user has no privilege or object not found: MERGE_SUBQUERY. Alias: default

  Why use MERGE_SUBQUERY? How to disable?

  (2) cannot run the package for loading of metadata - it crashes and nothig

  

  But this package scenario generates and works very well!

  If I run the package in simulation mode error

  java.lang.RuntimeException: java.util.ConcurrentModificationException

  to com.sunopsis.graphical.dialog.SnpsDialogExecution$ 1.doAction(SnpsDialogExecution.java:892)

  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:203)

  at oracle.odi.core.persistence.dwgobject.TransactionalDwgObjectTemplate.execute(TransactionalDwgObjectTemplate.java:64)

  at com.sunopsis.graphical.dialog.SnpsDialogExecution.doPackageExecuter(SnpsDialogExecution.java:842)

  at oracle.odi.ui.action.SnpsPopupActionExecuteHandler.actionPerformed(SnpsPopupActionExecuteHandler.java:154)

  at oracle.odi.ui.SnpsFcpActionAdapter.handleEvent(SnpsFcpActionAdapter.java:395)

  to oracle.ide.controller.IdeAction$ ControllerDelegatingController.handleEvent (IdeAction.java:1482)

  at oracle.ide.controller.IdeAction.performAction(IdeAction.java:663)

  at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:1153)

  at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:618)

  at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:2018)

  in javax.swing.AbstractButton$ Handler.actionPerformed (AbstractButton.java:2341)

  at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:402)

  at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:259)

  at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:252)

  at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:290)

  at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:289)

  at java.awt.Component.processMouseEvent(Component.java:6516)

  at javax.swing.JComponent.processMouseEvent(JComponent.java:3320)

  at java.awt.Component.processEvent(Component.java:6281)

  at java.awt.Container.processEvent(Container.java:2229)

  at java.awt.Component.dispatchEventImpl(Component.java:4872)

  at java.awt.Container.dispatchEventImpl(Container.java:2287)

  at java.awt.Component.dispatchEvent(Component.java:4698)

  at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4832)

  at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4492)

  at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4422)

  at java.awt.Container.dispatchEventImpl(Container.java:2273)

  at java.awt.Window.dispatchEventImpl(Window.java:2719)

  at java.awt.Component.dispatchEvent(Component.java:4698)

  at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:735)

  at $200 (EventQueue.java:103) java.awt.EventQueue.access

  in java.awt.EventQueue$ 3.run(EventQueue.java:694)

  in java.awt.EventQueue$ 3.run(EventQueue.java:692)

  at java.security.AccessController.doPrivileged (Native Method)

  in java.security.ProtectionDomain$ 1.doIntersectionPrivilege(ProtectionDomain.java:76)

  in java.security.ProtectionDomain$ 1.doIntersectionPrivilege(ProtectionDomain.java:87)

  in java.awt.EventQueue$ 4.run(EventQueue.java:708)

  in java.awt.EventQueue$ 4.run(EventQueue.java:706)

  at java.security.AccessController.doPrivileged (Native Method)

  in java.security.ProtectionDomain$ 1.doIntersectionPrivilege(ProtectionDomain.java:76)

  at java.awt.EventQueue.dispatchEvent(EventQueue.java:705)

  at oracle.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)

  at oracle.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)

  at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:242)

  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:161)

  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:146)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:138)

  at java.awt.EventDispatchThread.run(EventDispatchThread.java:91)

  Caused by: java.util.ConcurrentModificationException

  to java.util.HashMap$ HashIterator.nextEntry (HashMap.java:922)

  to java.util.HashMap$ KeyIterator.next (HashMap.java:956)

  at com.sunopsis.dwg.codeinterpretor.SnpGenerator.finishSession(SnpGenerator.java:1316)

  at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenPackageSessionInternal(SnpGeneratorSQLCIT.java:3580)

  at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenPackageSessionSimu(SnpGeneratorSQLCIT.java:3514)

  to com.sunopsis.graphical.dialog.SnpsDialogExecution$ 1.doAction(SnpsDialogExecution.java:859)

  ... more than 49

  Does anyone know these issues do anything?

  Best regards

  Before you run just have a look on these

  http://devepm.com/2014/07/18/really-using-ODI-12C-for-data-integration-with-Oracle-Hyperion-planningessbase/

  https://blogs.Oracle.com/dataintegration/entry/using_odi_12c_for_data

  https://www.change.org/p/Oracle-announce-support-for-the-ODI-KMS-for-Hyperion-Planning-and-Hyperion-financial-management-in-ODI-12C-by-December-31-2014

• query to find the dependent task, attached to the task on a response in OIM 11 g

  can someone help me to do a sql query to find the dependent task, attached to the task on a response in OIM 11 g
  
  Published by: user13331347 on Sep 3, 2012 14:09

  Use under query to find the dependent task in OIM 11 g: -.

  Select pkg.pkg_name, mil.mil_name, rsc.rsc_data, rsc.sta_key, sta.sta_status, sta.sta_bucket, mil2.mil_name
  pkg pkg, tos tos, mil mil, mil mil2, rsc rsc, sta sta, rgm the rgm
  where pkg.pkg_key = tos.pkg_key
  and tos.tos_key = mil.tos_key
  and mil.mil_key = rsc.mil_key
  and rsc.sta_key = sta.sta_key
  and rgm.rsc_key = rsc.rsc_key
  and rgm.mil_key = mil2.mil_key
  order of pkg.pkg_name, mil.mil_name, rsc.rsc_data, sta.sta_status, mil2.mil_name

• How to change data objects and update the corresponding task and task forms?

  Hi all
  
  I modified this thread because I found that I had many questions to ask.
  
  1.
  I'm quite new to OBPM and would like to know how to change data - for clarity objects add a new attribute "Dependents of the Client" "Customer care" - and therefore update the task that uses the 'customer information' what makes via data binding - I get an error message here - or via the data about the data Task-The chosen tab it does not appear to be linked to my approach in some sort.
  
  2.
  Will be the task form that I generated earlier in < 1 > update automatically? Is it possible to update manually if the task has been clearly customized?
  
  3.
  What are the objects of project data? They do not store values in my process. They are for the arguments only - like reusable process?
  
  Thanks in advance,
  
  Kind regards
  
  Yanis

  Hi Yanius,

  (1) assume that you start from scratch. First, you declare your data object structure. To do this, you must go to the BPM project Naviagtor, right-click on 'Catalogue of trades' and create a new Module. Then you can right click on the module you created and select the new object of trade. Add all the attributes you need. It is the same to declare a class in Java. Second, you must declare a variable of the type process you have created: select the process, go to the Structure display (if you don't go and activate it in menu view Jdev-> Structure). Right click on the Process data object and create your variable. It's like setting a variable in Java. In short, answering your question, make the path opposite: find in your process of type "Customer Details", then go to your catalog Business, right click and change the definition to add what you need.

  (2) the human task will not update automatically (annoying). If you change the object itself, so you don't need to change your mappings because actually there the same object you are through the task as in / out argument. There are two things here: the human task and form associated with it (where probably change you the subject i.e. customer details). Go to the form (.jspx) - click on the tab links (by default, you are in the Design). In the links page, there is a link on top: "Page Définition File" (something like proj/pageDef/...xml). Open the XML file and go to the source. There you can add manually now all the attributes you need and that were not available before (i.e. dependent Client). It's a little complicated, but at least you don't have to recreate it. particularly useful if you have already implemented and subsequently form, you need to add more things (business is very good to say otherwise, "I would like to see something else in the form" ;)

  (3) project data objects are visible by all processes that you have in the project rather than the object of process data that are visible only to the method where you set the variable to. This means that you declare an object of data of the project once and then it will be available to all processes. Keep in mind that each process has a copy of it. In other words, it is not like a global variable that everyone sees. If edit you in a single process, other processes will not see the new value.

  I hope that I have answered your questions.
  See you soon,.
  Felipe

• CS5-&gt; CS6 upgrade hangs, block the windows Task Manager, does nothing else

  Got the CS6 Design Standard update, hoping to upgrade from CS5 Design Premium. Could it be the problem? I don't have all the added bonus and this stuff is ridiculously expensive.

  In any case, I put the disc, nothing happens. I run the set - up.exe, the disc spins, then nothing continues to happen. I watched it for up to 5 minutes and nothing.

  Set - up.exe isn't in Applications, but it's in the process in windows Task Manager. However, there is no real activity at all. When I try to end the process, WTM crashes. I have to every hard reboot or eject the disc in order to recover.

  What gives? I can post PDApp.log if need be, but I don't know how much help it will be.

  W7 Pro 64-bit

  So it turns out that it was the reader. I installed an internal DVD SATA drive and it ran the update without fault. Just in case someone else stumbles across this post with a similar problem, make sure that you do not install the update of an external USB DVD drive, specifically a Samsung SE-S084. It won't work.

  Thanks for the help guys!

  J

• How could get the categories of items and Module-specific to the company?

  Could we make it point to organization and specific Module categories? At present, the same structure of flex 'Categories of elements' is used by management of orders (already implemented) and now the purchase of / iProcurement (executed). To make category and module-specific to the company, we need to attach a value based on a custom SQL?
  
  In the implementation of the OM, we used flex structure "Article catégories" for items of products finished. Thus, a finished good CEMBAG has CEMENT category. BAG attached to it. Cement bulk's CEMENT. In BULK which are related to it. In this phase, we create spare parts using the same category structure (I was wondering, if we should change it). But now, when we will implement an element, we see all categories, for finished products and spare parts in all of all businesses. So, we see Working CAPITAL. BALL.., ELECTRIC. AMMETER... OM alongwith categories. We cannot change the default category value for the management of orders or inventory (already implemented), but it looks like that we would have to change the default category for purchases of separate categories. Also need to separate the research as the reason Codes. Tell code for a reception various gives all reason codes, those created for the management of orders and purchases.

  You must make sure that the categories assigned to the entire old category also appear in the new category.

• Why the simple task of transferring photos that should be done drag and drop such a hassle from my phone to the computer

  Why the simple task of transferring photos that should be done drag and drop from my phone to computer such a chore... It is a success or a failure... open iphotos sometimes sometimes it doesn't.

  < published by host >

  Drag and drop is not supported from iPhone to computer.

  Sync with iTunes or iCloud > keep your photos safely stored and updated on all your devices - Apple Support

• How to display multiple windows next to each other on top of the other in the bottom task bar

  When I open a new Firefox window, he stacked it on top of all others in the taskbar at the bottom. I wish they were next to each other. He used to do this. Now, I have to hover over the element ONLY Firefox in the bottom task bar and read the list to find the one I want to go to. It is a waste of time and tedious.

  How can I change this?

  I think that this is governed by your general taskbar setting. Please see the screenshot joint. To get this dialog box, right-click an empty area of the taskbar, and then choose Properties.

• modules missing from the Tools menu option

  Modules/link option is missing in Thunderbird 24.6 menus - where is it and how to install or remove modules?

  The FAQ tells us to go into tools > Modules > etc.

  Not possible if it is not there.

  Ooops!

  Thanks, Airmail, my brain seems to not work as well today.