Monitor and alarm VM disk by not % GB space

Similar Questions

• Tecra 8000: monitor and the HARD disk does not work - does not start

  I have a laptop Toshiba Tecra 8000 given to me the year last by my uncle. I live in England, but it is and bought the PC in Italy. I do not know if this causes complications, but I thought it may be useful.

  Since I got it it occasionally did not display any image of all system startup, so if I have given some time and restarted it would start working again. Happening of bagan more frequently and now I can't make it work. I have conections and found that everything was in place. Then he doesn't seem to be turning on, however when I replaced the front LED cable seems to be turning on and although I couldn't hear much the CPU was luminous heat. I opened the drive and it gave once more, succeeded him and he still wouldn't start. I had purchased and replaced the screws on the heatsink around this area but I did not handle it with many other things.

  So now, I have a monitor that does not work and a gard drive that won't start... Any ideas?

  Thank you!

  Hello

  Could be either the card mother, CPU or ram. The processor when it goes bad or is not locked in place (have had this before, install the CPU but forgot to turn the lock, so he cannot move) the computer will act as its startup, don't give any error and stay on a black screen. Verify that the processor is locked in place. Then remove the ram and try a stick of RAM that runs on another computer. If you try the RAM and the processor do not always start, then chances are your motherboard is dead and must be replaced. Hope this helps and that solve you the problem.

• I forgot my password for windows 7 for my laptop and a reset disk has not been created. How can I recover the password or create a new one? and I have a dell desktop inspiron one 19

  I forgot my password for windows 7 for my laptop and a reset disk has not been created. How can I recover the password or create a new one? and I have a dell inspiron one 19 desktop... your help will be very appreciated thanks in advance!

  Here are the usual methods to solve this problem:

  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Logging in as a different admin account and then reset the password for your existing account (works only if create you an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (works only if you have activated the account administrator and know its password).
  • Insert your flash drive USB with the password key file (only works if you have created such a keyfile).
  • Check your paper files (works only if you threw down the password somewhere)

  If none of these standard precautions work for you, then the remedy will be painful. Post again if this is the case.

• on the backup, I saved D recovery and it stopped due to 'not enough space. / have I saved in the wrong place?

  I backed up my computer and it went to recovery D but it has stopped backup because of the "not enough space" How can I handle this?  I'm new on this.

  I backed up my computer and it went to recovery D but it has stopped backup because of the "not enough space" How can I handle this?  I'm new on this.

  dodieZONAKIS DDS,

  Your question [on backup, I saved the D collection and he stopped due to 'not enough space.] [/ have I saved in the wrong place?] (<-- that="" is="" a="" link="" you="" may="" click="" on="" to="" get="" back="" to="" your="" original="" question)="" has="" been="" marked="" as="" answered,="" only="" you="" did="" not="" mark="" it="" as="" such="">Rob.C a.]

  I feel compelled to ask whether and how you solved your problem?

  The marked answer * not * have one you used and for the benefit of those who might ask the same question in the future it is better the original poster mark their own answers, in my opinion.

  If you feel that your issue has been marked as answered by mistake (the answer does not match your need or your fix) then please, deselect as soon as POSSIBLE. I am including instructions on how:

  You can go to the answer and click on the following to stand out as a response.

  

  If you are able, please go back to your original question and that everyone knows how you solved your problem, if you have and mark the answers correctly. This initiative will help to close the question properly or help us to help you if you still need help.

  Thank you!

• I forgot my password for windows 7 for my office and a reset disk has not been created. How can I recover the password and the log on my computer? Help, please!

  I looked at the number on google. He brought to the top of this forum. I tried the solution that looked like it would work for me. I opened it in Mode safe mode with networking as suggested and got no where. A reset disk did not at all. Is there another way I can reset the password? Thing I can do?

  Hello

  I suggest you visit the link below and check if this can help:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  You can also check:

  http://support.Microsoft.com/kb/189126

• U3014 monitors and Radeon HD 8570 will not display 2560 x 1600

  Monitors and video cards say they take in charge of 2560 x 1600. But there is no other choice for this resolution in the catalyst control center or the display settings. Windows 7 Enterprise 64-bit
  Graphics card: Radeon HD 8570 (should support 2560 x 1600 on two screens).
  2 ports DVI and Display Port display-> DVI (via an adapter).

  Fix.

  If my memory is good, the screen only comes with a dual link DVI and a miniDisplayPort to DisplayPort cable, but you can use the miniDisplayport on display and displayport on your GFX card connector and try again.

• Satellite P300 - 190 PSPC2C - water spill and the HARD disk does not appear on the Setup

  Hello

  Spilled water on the keyboard. Laptop has stopped working.
  Dried, but did not recognize the HDD start up and HDD does not Set - up.
  Moved the HARD drive to another location of the HARD drive on the laptop and it appears at startup and boot OK.
  Is there an easy way to find and repair the defective HARD drive slot?

  Thanks for any help.

  PK

  Hello

  The HARD drive slot is not repairable. It s a HARD disk controller and I guess the HARD disk controller is dead.
  The HARD disk controller is part of the motherboard and if you want to repair it, so the entire motherboard must be replaced.

  New motherboard would cost a small fortune he of not good about market 350Euros
  That's why I put t think it is s to replace the mobo only to get the HARD drive in the first location of work

  This is my personal opinion...

• Satellite C650 - error reading disk and the recovery disk does not work

  Hello

  I have a toshiba Satellite C650, who has recently developed with a disc read error. I want to access the command prompt to try some possible solutions I've read on the internet.

  I made a Windows 7 recovery disk using my other acer laptop which has also installed Windows 7 64-bit. When I use the recovery disk and it loaded the files etc it evokes just a black screen and the cursor.

  Does anyone have any ideas as to why this is happening?
  I tried to start my computer acer laptop from the recovery disk and it worked fine.

  As is - this does anyone have suggestions as to why I get the message "disk read error - press ctrl, alt and delete to restart?

  Any help would be appreciated, thanks.

  On this virtual path, it is not easy to offer the exact diagnosis, but of course, there must be a problem with the HARD drive. Can you get a second one for test purposes and exchange it. Just to be sure if the HDD is troublemaker.

  But there is something else:
  > I made a Windows 7 recovery disk using my other computer acer laptop...
  Sorry, but I don t understand this. Can you please explain what you did exactly?

• How to install xp after installation disc and erased hard disk is not available?

  My windows xp system was not working, I erased the hard drive! Now I have a computer that does not work!

  To develop what Daavee wrote, please explain, step by step, exactly what you were doing in your attempt to "recovery" of the computer and include a description of the "recovery disk" - that is, made the "recovery disk" you have used come with the computer or do you have it created when you bought the computer first?

  In addition, please explain what happened when you run the recovery disc - in other words, have you seen all messages concerning the formatting of the disc; on the Windows installation: or error messages (please, report them to the better you remember).

  "When you say the computer" will not work "-what happens when you turn it on (after removing all CD/DVD drive)?  Report the full text of the error message.

• My hard drive, burned and my recovery disks do not work how I put Windows XP on my computer?

  My hard drive went bad... I had no time to save, but I had made the recovery discs that don't work... I need to know how to reinstall the XP operating system on my computer now? Thank you

  If you have a PC OEM (HP, Dell, Emachines, etc.), then the responsibility of reinstalling Windows is with the manufacturer of your computer.  Contact them and find out if you can get an installation disc.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.
    <>http://support.Microsoft.com/kb/326246 >

  HTH,
  JW

• Service Pack3 attempts to install on my C drive but my main drive is the D drive and I get the response "not enough space on drive C to install this update"

  I had to recover my computer and when I reinstalled Windows I chose D drive and normal drive (C) now is the HP recovery disk.  The update

  do not give me a choice to have the download go to the D drive.

  You receive error messages if there is insufficient free space on the system drive to install Windows XP SP3
  http://support.Microsoft.com/kb/956894

  How to recover disk space on a computer running Windows XP with a hard disk of 4 GB or less
  http://support.Microsoft.com/kb/956324

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  [[Less likely...]]

  Error message when you try to install Windows XP SP3: "you don't have enough disk space on % lecteur_systeme % to archive the uninstall files.
  http://support.microsoft.com/kb/949375 ]]

  =============================

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually before connecting any external drive to your computer: http://support.microsoft.com/kb/971029

  VERY IMPORTANT! =>  No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid!) when Windows is reinstalled. You MUST uninstall the trial AND THEN download/run the appropriate removal tool before installing updates, Windows Service Packs or IE upgrades AND BEFORE installing your new antivirus application (for example, Microsoft Security Essentials - free).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

• HP S3120N. I replaced the motherboard and the power, now the recovery disks do not work.

  I'm not so happy owner of a HP Pavilion S3120N. I am running windows vista home edition. The motherboard went out so I replaced it with a Zotac GeForce 8200 - ITX Wifi series. Now the computer says it is noa a hp solution valid, and the recovery disks do not work. is there a way to fix this without buying a new operating system?

  Yes, return the Zotac motherboard and get an OEM HP/Compaq M2NC51-AR / HematiteXL-GL8E motherboard. I know that's not the answer you want to hear, but the recovery discs are locked to a specific set of HP/Compaq machines with specific HP OEM motherboards. Apart from this, you will need to buy a new OS.

  Frank

• Monitor project and timeline window titles do not appear in the new project?

  The sequence program monitor and timeline sequence 01 does not appear on the opening of the new project, eventhough checked in the Windows space.

  All existing projects are showing the correct disposal and can be used, but I can not activate a new project except import clips into the project window.

  Any help would be appreciated.

  Operating system is 64 bit i7 and program CS5.5.2 Premiere Pro.

  Is to say, the space is there but no info that is to say, lines, titles etc. of chronology to insert clips or display in the monitor?

  Post edited by: Bob ten photographer

  Simply create the timeline (sequence) of one of your clips. In this way, it's a perfect match.

• Suspension of monitor and hard drive has stopped working

  I had to reinstall my copy of XP after that I accidentally deleted the Isass.exe file, and do so to found the scroll to be less than adequate and time allocation for the monitor and the hard disk to stand down has stopped working. I can't put the computer in standby mode. If I use the screen saver, it lights up at the set time, but when the time is reached in which the monitor is supposed to withdraw, the screensaver disappears and the full screen returns. After that, the screen saver is no longer turns on until it is reset. In addition, the condition "save under" on the power selector is not save configurations.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• sparsebundle disk image not mounting

  I've recently upgraded to Mac OS Sierra and now I can not mount an image of disk sparsebundle.

  I enter the password, and then nothing happens.

  I tried the same image on a Mac running Leopard and it opens fine.

  I tried a few other sparsebundle some and other encrypted disk images not. Some are open very well, but others do not.

  So, it doesn't seem to be a problem of sparsebundle encrypted disk image.

  Any suggestions?

  After investigation a little more the problem is Sophos AV

  Turn it off and the disk mount fine images.

  I hope this helps.