Monitor W2072a

Similar Questions

• Computer monitor HP W2072a

  Computer monitor HP W2072a el cheapo made in China.  Bought 28/03/14, he South wen with moss green color and vertical lines of broad a few days ago.  Tried on another computer, same thing.  Called the store where I bought (without package) and of course they referred me to HP to give me a phone number.  I tried to market 3 days and always get a busy signal.

  Any suggestions?

  After several days of occupation of HP signal help I threw the piece of junk in the trash and will never buy another HP product.

• monitor HP w2072a out of range problem

  Hey, reader, I am using a hp w2072a monitor and it hooked to my ps3 to a hdmi to dvi cable, but when the 1080 p resolution on the w2072a it says out of range change affecting 1600 x 900 at 60 Hz and tried to change it but could not find in the main menu of the monitor please help thanks

  Hello

  To change the resolution to the ps3, not in the menu of the monitor.

  C.

• HP W2072a: moniter

  Hi guys.

  I have the type of hp W2072a monitor and when I turn on my PC I get message like this

  {no signal DVI. VGA no signal}

  Please help me I want to support

  and I tried to remove the RAM and battery and clean all the dust in the motherboard

  I also tried to replace the cable from the monitor and VGA cable but the message still appears for me

  Concerning

  Hi @Sirius_R136a1,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community! I understand you that you need help with your HP monitor that gives a message "no signal DVI, no VGA no signal. I'll be happy to help you.

  A remarkable work was done in trying these troubleshooting steps before posting your question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills and levels of technical knowledge.

  Please perform a reset hardware first monitor steps to do:

  • Unplug the power cord from the monitor and the computer cable.
  • Please press and hold the power button on the computer for about 20 seconds to carry out the static electrical charges.
  • Reconnect the power cord and check if the monitor displays the same message without DVI no signal no VGA signal without connection to the computer.

  If it is the monitor displays the same message, then there may be nothing wrong with the monitor. If you tried another monitor with this computer and it did not work you must get the repaired computer. You can check this link for assistance: http://support.hp.com/us-en/document/bph05236

  If it's an HP computer you can contact HP telephone support on http://hp.com/contacthp and follow the on-screen instructions to reach phone are supported. If it's an old HP computer maybe not options available service and you may need to contact a technician on site to get the computer fixed.

  I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well. I'm always here for you help. Please reach out at any time.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• HP Pavilion P 7-1414: HP monitor

  I upgraded my desktop computer of Windows 8 to 10.  Everything seems to work except my monitor when I turn away for a second, when I turn around, the page is not there, where I left it on, it's a grey color, but when I move my mouse it turns back on. Then I have to sign in and the page I left is there. As for example if I wanted to copy a recipe on the net, and I'm the copy by hand, I have to move the mouse every little second. I don't have a screen saver. And that's what he is like, if you had a screen saver that he'd jump him.

  HP W2072a monitor

  Hi there @Stumped6
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff. I understand that after upgrade to Windows 10 whites out display after a short time, as a screensaver. I'm happy to help you with this.

  Have you tried to install the video driver in compatibility mode?

  By chance did you touch the display as screen saver settings?

  It may be something in the sleep and Hibernate power options. Find out what follows that runs several possible causes and also suggests the HP Support Assistant, if there is a driver problem in the game. Give it a try.

  HP computers - sleep and Hibernate issues (Windows, 10, 8)

  Just in case it's something to do with the screen saver setting, see the following topics. It may be useful to set a screen saver with a duration of 15 minutes to see if there is no change.

  How to customize the screen saver in Windows 10 - thewindowsclub.com

  Let me know if this helps at all, or if there is an error message you see everything by trying things in these pages.

• external monitor for HP Omni 10

  What can I use as an external monitor to the HP Omni 10? I have a HP W7072a, going to work?

  Wow, that was fast! (and useful... I'm surprised that Google has been distraught on "HP W2072a.")

  This screen has a "native resolution" of 1600 x 900 pixels, which is the correct report (16 x 9) to display videos and movies. However, it can display only a part of the Office of the Omni at anytime and it will take more scrolling to view the contents of the window & a few pop-ups information may not be displayed correctly. To get an idea of what it will look like, use the control panel displays temporarily set at 1600 x 900 Omni display and see if you find acceptable for your usual activities. This is an important consideration, because an image unique to an external display, it will fix a mouse & possibly a keyboard to your Omni to control what is happening on the screen. If you can 'live with' 1600 x 900 pixels on the screen of the Omni during the projection of a "duplicate" of this to your W2072a from HP, you can avoid the complication of keyboard and mouse. Assuming you are willing to change the display resolution of the Omni if necessary, you will need a 'micro-HDMI Cable VGA adapter' for your Omni to connect to this display. I did not see one of those on the HP shopping site, but here is a link to several:

  Amazon.com: adapter HDMI / vga

  (They mainly differ in the length of the cable, and if they are the only two video and audio or video, you will need to decide which type will work best for your situation. Check the comments to find the models rated & no problem...)

  I hope this is enough information to help you on your way... You can usually find some Member of the forum available to answer additional questions, and we will certainly appreciate having to report it at the time where the connection works to your satisfaction. You can then mark this "resolved" discussion while the other forum visitors can easily find and enjoy your experience.

  Good luck!

   

   

• How to switch between the 2 monitors?

  This is probably a stupid question, but... I managed to install a monitor HP W2072a for my Toshiba laptop (Windows 7).  I see the same content on both monitors.  I would like to see material different on the separate HP monitor.  How to configure the 2nd screen to see different content? Thank you.

  Hello

  Please follow the instructions below:

  http://support.Microsoft.com/kb/976064

  Good luck.

• W2072a: W2072a power adapter

  I have 2 - W2072a (20') of monitors. Initially, only had a problem with the AC adapter. I tried other adapters and they were all very 'bar '. Once I get the light to come one, it stays on, I did not move the monitor. So I have to kepp it jiggling so that the light stays on. Well, I had to get the other monitor today and started doing the same thing, when I tried to plug it back in. It's a pain in the buttocks of he, until I get them finally turn on. Y at - it tips on how to get the best contact? It seems that the rope must be almost "loose" to work.

  Hello @DaveErving,

  I understand that you are having problems with your HP power cords W2072a LED Backlit LCD Monitor having to be loosely connected to work. The problem you describe seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.

  I want to thank you for display on the HP Forums. Have a great day!

• Need help to find an adapter for a third-party monitor

  Hi all! I find myself in need of a little guidance, and I hope that someone out there will have a quick n easy for me...

  I have a Mid-2011 27 'iMac. which has two ports Thunderbolt It is taken with a Wacom tablet that I use constantly, and the other is made by an external hard drive to a solid state, which has a built-in cable to Thunderbolt (no way to hang it on a different port). I also have a 27 "HP monitor that is currently connected via an HDMI USB adapter.

  The problem is that the HP monitor is actual "jiggy" - the USB does not seem fast enough to deal with requests for the monitor. It is almost unusable. I know I should run it via a HDMI adapter Thunderbolt, but as I have already mentioned the two my Thunderbolt ports are already in use.

  Someone at - it ideas? I need sort of three to two ports Thunderbolt hooks, but I can't seem to find anything for less than $300 that would work. (I am illiterate when it comes to the different cables, adapters, ports, etc., so I hope someone can point me in the right direction by using short words... Most of the products that I travel through list specifications that me Chicane).

  The monitor has two HDMIs and a VGA port, and my iMac has a Firewire 800 port, if that helps at all...

  2011 iMac have only 1 Thunderbolt port and there is no such thing as a Mid-2011, you must have an iMac of year later, if it has 2 ports Thunderbolt. All the 27 "iMacs, from 2012 to 2015 the current have 2 ports Thunderbolt.

• MBP: monitor detected but no image except by VGA

  I have a MBP of Mid 2012 running latest El Capitan.

  When I connect to an external monitor, it is detected correctly in views (exact name, resolution, etc.), but the monitor doesn't detect any image from the portable computer. I tried the DVI - D and DisplayPort with various cables and monitors with the same result, but a picture appears if I connect to VGA. It started in the past week.

  The built-in display does not work normally.

  Looks like a hardware failure in the computer DisplayPort connector laptop, as the pins are worn or something?

  Any other ideas?

  Hi johngirvin,

  Thank you for using communities Support from Apple. Sorry to hear that you had these display problems with your MacBook Pro. Looks like you've been on the right track trying to solve this problem. If you continue to have problems, you can find the additional steps described in the following article useful, up to and including contacting Apple Support if necessary:
  

  Get help with graphical problems on the external displays connected to your Mac - Apple Support

  Concerning

• Activity monitor close unexpectedly when running in the background on the left

  Recently upgraded to Mac OS Sierra and Activity Monitor to close unexpectedly when running back plan left (do not smoke and open the activity monitor window) to a blank desktop when you use an application in another office. Clean install I tried but the activity monitor would still be down at random times when left running in the background to another empty office. Someone at - there experience this problem? For most browsing on the web using Safari on another desktop computer when Activity Monitor quit unexpectedly.

  Activity monitor also using a lot of energy since the upgrade?

  Any help would be appreciated. Thank you.

  Model: MacBook Pro (retina, 13 inches, early 2015)

  OS: macOS Sierra: 10.12 (installed via the upgrade, own installed after this problem).

  Do not forget that you are using the activity monitor version which was installed when you upgraded to Sierra. Activity monitor located in the your Mac utilities folder.

  If you have moved a previous version to a different location, it will not work.

  If you are using the correct version, post crash report. Error reports lies in the application of the Console under System reports or reports from usersand end in the suffix .crash. If you choose to do so, omit or hide any information that you consider personal.

• monitors external macOS Sierra + MacBook Pro 15 "+ 3 = gel

  This facility has worked with El Capitan (2 Thunderbolts-> DisplayPort + HDMI 1 = 3 monitors).

  Update of macOS Sierra - as soon as I connect a 3rd monitor (any order) - it freezes the whole system. Two monitors works very well

  If I boot with three monitors connected, the screen goes black and I have to power down manually.

  My system: MacBook Pro (retina, 15 inches, end of 2013)

  Same problem reported by other users on SuperUser.com.

  Someone else had a similar problem? Everyone is running the same configuration without problem? All known resolution?

  There has been a lot of complaints of not being able to use the resolution full screen on 3 monitors of party, who has worked in El Capitan.  I've seen all the problems such as you report.

  However, I guess the graphics driver passed under changes in the Sierra, and it is possible, that this is yet another side effect.

  You may very well be a bug, so that developers know that there is still another problem with the graphics driver Sierra

  BugReporter (account free ADC (Apple Developer Connection) required for BugReporter)

  <http://bugreporter.apple.com>

  Anyone can get a free ADC account at:

• How to document the application to another monitor

  I have a setup of 3 monitor for work. I need to have my video capture software, Media Express, on the primary and secondary monitor. On my 3rd monitor, I wish I had Final Cut for editing.

  Does anyone have a solution for this?

  In setting system preferences displays, displays as an extended desktop, and then drag one poster rather than another. For more information, scroll down to the last section on how to "implement some screens for implementing mirrored and extended desktop":

  Connect multiple monitors to your Mac

  https://support.Apple.com/kb/PH19039

• 4 k monitor on macbook pro

  I have a MBP 15.4 (retina) and need to find a 4 k monitor that will work with my MBP...

  Hi Labecote,

  Thank you for using communities Support from Apple! For more information on the use of 4K displays with your Mac, including system requirements and specific models that are known to work, you can find the following article useful:
  

  With the help of 4K and Ultra HD TVs with your Mac - Apple Support screens

  See you soon!

• Strange shadows on the Sierra of the Mac OS on an external monitor

  After upgrading to Mac OS Sierra, I noticed that there are these strange shadows. It of almost like the gradient of a shadow is not fluid and smooth:

  Screenshots:

  https://www.dropbox.com/s/dj6g3x68c9ggwez/screenshot%202016-09-24%2008.34.42.PNG? DL = 0

  https://www.dropbox.com/s/2ql2prnhn2k27rz/screenshot%202016-09-24%2008.35.43.PNG? DL = 0

  Is this normal, or is there a problem? Recommend a fix?

  I'm on Mac mini (mid-2011) and a screen LCD Dell UltraSharp U2913WM 29 inches.

  ... However, if the screenshots are picking up, it seems less like a problem of monitor and more like an incompatibility of graphics cards with MacOS Sierra?

  This seems to be quite normal. The windows are translucent, and what I see, this is the result of the image behind the window.

  It was the same thing in El Capitan (and, I suppose, Yosemite, as well).

  You can go to system preferences - > accessibility-> display and select "reduce transparency" if it bothers you.