Monitoring of hits / traffic for Flex program

Similar Questions

• CS5, no Audio output of the Source monitor, but output OK for the program monitor

  Hi all

  Any thoughts on why audio output would be audible during playback in a timeline/program monitor, but the same clip doesn't produce audio output when loading in the source monitor? In the body of CS5.

  I checked the preference settings and everything seems to be fine there.  We have just added a set of external speakers to this workstation and those are the audio devices in the program monitor.  When a clip is read in the Source monitor, speakers produce a nice low hum, but the sound of the clip is missing.  The buzz that crosses leads me to believe the audio hardware is mapped and set correctly, but maybe not?

  Thanks for your thoughts?

  LIndsay

  My apologies for the lack of detail... I know better than that.  Luckily I thought about it the problem.

  The clip is Ikegami MXF.  The problem was that the first audio channel didn't have any audio recorded to it.  I changed the properties audio clip and disabled channel 1. Voila! The clip was loaded in the source monitor and the sound became audible.

  I found the inspiration for the fix in this thread: http://forums.adobe.com/message/4324033#4324033

  Thanks for the research!

  Lindsay

• Monitor internet traffic for each user in windows 7

  In a stand alone system (a customer) with multiple user accounts, how can I monitor / limit internet traffic data?

  Please enter a software

  Hi Nima,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you want to monitor internet traffic data.

  I suggest you to refer to the suggestions of Shekhar S replied on 12 January 2011 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Networking/Monitor-Internet-traffic-on-Windows-7/25dbc14f-8190-46b6-b1fe-3b8f0cd550cd

  Hope this information helps. Please let us know the results. We will be happy to help you further.

• Asked to "monitor all network traffic" Fusion 7.1-8.1 Windows plain vanilla VM - I didn't ask for it, how to disable it?

  Hi all

  I created a computer virtual Windows 8.1 on October 1, 2013 with the current, at that time version of VMWare Fusion (not Pro, who has the tab network preferences and the check box associated to whether to display it's fast) on my Mac.

  Since then, I upgraded the version of OS X to Yosemite and the version of VMWare Fusion to 7.1.1.

  At one time, months or years, I started having the prompt below:

  

  A virtual machine tries to monitor all network traffic, which requires administrator access. Type your password for this purpose.

  I don't want to allow this, I never asked for this virtual machine to use the "Promiscuous" mode, I don't want to do, and I can't find anyway to turn this off!

  I always leave the command prompt and everything works fine.  Discussions only I can find this in the forums are all related to people using ESX to vSphere, neither of which I have no knowledge where all used.

  I had an another VM Windows 8.1 on another Mac during the same time, which has crossed all the same updates, and it never shows this prompt.

  Please help make this stupid, quickly go and stop this virtual machine to try to use the "Promiscuous" mode!

  Thank you - Harold

  You have the Hyper-V role installed in the virtual machine?

• Prefetch is just a feature for Windows programs, or work for 3rd party too?

  My understanding of Prefetch is that it monitors the use of programs and try to anticipate when they could be used and so loaded them in memory, ready to go.

  It is just a feature for Windows programs, or work for 3rd party too?

  For example, I use OpenOffice and the first time I open it, it takes several seconds to open. If I close and open the program via a session then always opens almost instantly (about two or three seconds) so it must be in RAM somewhere. Yet every day the initial aperture is slow.

  Is - not what Prefetch is supposed to address?

  Hi Mooly,

  You can read the following article and check:

  What is the prefetch folder?

  If you are concerned about the start time, you can consult the following link:

  Optimize Windows Vista for better performance

  Hope this information is useful.

• ASA Site to not tunnel no transmission of traffic for some subnets after awhile

  Hello

  We have a question really strange tunnel from site to site on several ASAs.

  We organize VPN tunnels between a small site and three largest.

  The den has an ASA 5505, the other three principles are ASA 5510.

  One of the tunnels working for months without problems.

  Each tunnel has several class C network.

  example Site:

  -192.168.50.0/24 (named A1)

  -192.168.51.0/24 (called A2)

  Site b:

  -192.168.60.0/24 (named B1)

  -192.168.61.0/24 (called B2)

  On two faulty tunnels, all is well at the beginning. After a few days (1-14) some networks to cease to work. So I can ping both A1 and A2 B1 network networks, but only from A2 B2 network. Pings from A1 to B2 doesn't expire. The ASA site showed tx = 0 traffic for <=>A1, B2, but progressive count rx traffic. ASA b it shows rx = 0 to B2<=>A1 and tx counties upward.

  This happens unexpected after different periods. Sometimes he hits ASA on site B, where tx = 0, it is sometimes ASA on A site.

  I tried to fix it as a result of orders:

  ISAKMP crypto claire his
  clear crypto ipsec his
  clear xlate

  but nothing has worked. The only solution for now is to restart the ASA where tx County indicates 0. After restarting, everything goes well for a while.

  On one of the affected sites, we have a failover configuration - ASA. A failover of the active device also solves the problem. But if you change your prior back restart the old principal question will return immediately.

  I think that there is no configuration because:

  -All tunnels are configured in the same way, and one of them is running for moths without any problem

  -Tunnels work for all combinations of subnet after a reboot

  -The problem occurs after different and long periods of time. So I think that the period between failures is long to be caused by tunnel a.s.o. timeouts.

  All ASA are running 9.1. (5) 21.

  I updated the firmware of several releases these past few months and had the same problem with any version I tested.

  So I hope that someone else has also had this problem and found a solution.

  Christian Hey!

  Hopefully, solve or find the root cause?

  Thank you

• Turn on DEP for all programs or Just essiential

  OK, I have windows 8 and my processor supports hardware (Data Execution Prevention) adj. I sorta understand the concept of DEP however not enough to know whether it should be enabled for all programs or all necessary programs or since my processor hardware DEP can I disable DEP Windows?
  All the information to help me understand better and an answer would be thank you much.

  Hi Peter,.

  Data Execution Prevention (DEP) is a security feature that can help prevent damage to your computer from viruses and other security threats. Harmful programs can try to attack Windows by attempting to run (also known as execute) authorized the code from the locations of memory system reserved for Windows and other programs. These types of attacks can affect your programs and files.

  DEP can help protect your computer by analyzing your programs to make sure that they use the system safely memory. If DEP notices a program on your computer using memory incorrectly, it closes the program and notifies you.

  It is not recommended to disable the DEP. DEP automatically monitors essential services and Windows programs. You can increase your protection by having DEP monitor all programs.

  First, see if a version compatible DEP for the program is available by visiting the website of the software publisher. If the Publisher has not released an updated, compatible version DEP for the program, you can turn off DEP for the program that was closed. You will be able to use the program, but it might be vulnerable to an attack that could spread to your other programs and files.

  If you choose to turn off DEP for a program, it's a good idea to check frequently for an updated version of the program and, after you update, to turn on DEP again.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• How can I disable "Fingerprint Software" for only for the programs?

  Hello

  somehow, the 'Fingerprint Software' require the user to slide a finger at any time it open programs that require the user to insert "user and password."
  How can I disable it permanently just for the program, not to open a session?

  Thank you.

  Hello

  In the TrueSuite Access Manager, you can configure some settings.
  In the administrator settings, you will find two tabs; General and advanced.
  On the Advanced tab, simply uncheck the option called: change logon Windows fingerprint logon password.

  I think that should do the job.

• Your browser is not supported for this program. This program is expected to be launched above IE4 version!

  The provider's Web site will not reflect orders/quotes...
  We get this message
  "Your browser is not supported for this program.
  This program is expected to be launched above IE4 version! »

  URL of affected sites

  http://

  To work around this problem, you can also try using the User Agent Switcher add-on to give the impression that you are using IE on the site.

  You can contact the site owner to inform them of their poor support for Firefox.

  Alternatively, you can report a broken help site.

• I can't build a Setup program for my program

  I'm building an installer for my program, but I keep to says that I must tell the system where are installers.

  I've attached a screenshot of what tells me to find, but told me not to find something specific. I made sure all drivers are up to date, but I can't yet build a Setup program.

  
  

• Is "Introduction to data acquisition" by R. King a good reference for learning programming of data acquisition?

  Is "Introduction to data acquisition" by R. King a good reference for learning programming of data acquisition? Or can anyone recommend a better text.

  Why don't you start hera.

• my c drive shows low disk space, so I searched for the program that holds more memory on drive c. I got to know that this pagefile.sys has 3 GB in the c drive

  Hi, my c drive shows low disk space, so I searched for the program that holds more memory on the c drive. I came to know that pagefile.sys has 3 GB in the c drive, kindly guide me to move the pagefile.sys to another drive.

  Hi jafrin.michel,

  Thanks for posting in the Microsoft community.

  Before you start the troubleshooting steps, I need the information required.

  What version of the windows operating system do you use?

  Method 1:

  If you are using windows 7, I suggest to perform a disk cleanup and verify.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 2:

  If you want to move the pagefile.sys to another drive, follow the steps and check out them.

  Follow these steps to move the pagefile.sys to C: drive on D: drive (if you have the drive D :).

  1, write click on my computer and select Properties.

  2, click on the Advanced tab.

  3, click settings under performance menu.

  4, click on the Advanced tab and click on change.

  5, select letter (C :) and "BOLD" No pagefile then click on Set. )

  6, if you want to configure pagefile.sys in, select drive D: drive letter D: and "BOLD" in the custom size or the size of the system managed , then click on Set. It displays a pop-up message click OK.

  7, again click apply and OK OK.

  8, the system you will be asked to reboot, click on Yes.

  9, after rebooting the system, you can see the pagefile.sys will be moved to D:

• I'm looking for a program that you alow to draw me and trace products and prototypes

  I'm looking for a program that you alow to draw me and trace products and prototypes

  Hello

  Looks like you need a CAD program. Have you checked with someone else, like engineers, who
  that job category? There may be some that are specifically designed to assist with your needs. Of
  course AutoCad, a commercial product, is used by many professionals.

  There are also many available freeware programs.

  BING or Google - freeware CAD programs

  FreeCAD - many freeware programs
  http://www.FreeCAD.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Optional update listed for a program that is not installed

  OS: Windows 7 Home Premium 64-bit - current (clean install on the new machine)

  AV: Blink Personal - current (eEye Digital Security) doubt that there is a problem

  Whenever I receive a notice on an update for Windows 7, there is always an optional update for Windows Live Essentials - except that I have not installed Windows Live Essentials.

  How can I fix it so update does not include an unnecessary update?

  Never seen an update listed for a program not installed before on 7 window

  No action taken - do not know how to stop it - the download screen allows no options ignore or hide an optional update that I see.

  Hello

  Windows Live Essentials is a collection of free programs include Windows Live Photo Gallery, Windows Live Movie Maker, Windows Live Mail
  and Windows Live Messenger.

  You can check this link for more information:
  http://www.Microsoft.com/Windows/Windows-7/features/Windows-Live-Essentials.aspx

  You can hide this update in Windows Update.

  1. open Windows Update.
  2. in Windows Update, select the Windows Live Essentials.
  3. right click and select "Hide update".
  4 leave the action when prompted by User Account Control.

  You can also check this link:
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Iexplore.exe application 0x079B0068 error - I need to turn off DEP for certain programs and services, but I don't know which. I can't open some favorite sites. Micorsoft advice is not to turn off Dep for all programs and services.

  Iexplore.exe application error 0 x 0790068 - I am told that I have to turn off DEP for certain programs and services, which?  I am unable to open some favorite sites from one about Microsoft Update 1 month ago.
  Simplify the answer please, I'm so confused and frustrated and have spent hours to get to this point that I am destroyed so solve my problem!

  Hello

  Do run this as a top list of verification at the bottom.

  EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
  http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspx

  The problem might actually be an add-on or another program to the origin of the problem and you should check that
  1st.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
  machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  not better?

  Close IE and try again IE or IE with no Addons

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
  Prevx running except a low occasional (not much), updated cookie, and then run it as a scanner.

  I would add prevx so.

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  -------------------------------------------------------------------

  Do yourself a big favor and work through 1 above.

  How control DEP but I don't recommend turning it off and certainly not to let power off.

  How to enable DEP on or off for a program under Vista
  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  How to enable or disable DEP in Vista
  http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.