Your browser is not supported for this program. This program is expected to be launched above IE4 version!

Similar Questions

• WMA files. The license could not be downloaded because your browser is not supported

  "The license cannot be downloaded, because your browser is not supported for download a license, you must install Microsoft Internet Explorer 7 or later.           To install the latest version of Internet Explorer, see the Windows Update page. »

  This message comes to the top, but only for some of my wma files. There are thousands. my computer is new and up-to-date.
  The thing is that some of these files are music that I created myself, so what was there a license put on it? It's mine I admit.
  so now, I lost these files forever?
  I can't convert them to mp3 because of the license, I can not play them as wma because of the license files. WTF?
  How can I play?
  How to get a license get put on MY music anyway?

  Hello

  1. have you already set Internet Explorer as default browser?

  2. when and where exactly you get this error message?

  3. what happens when you try to update Windows Media Player?

  4. what version of Windows Media Player do you use?

  Method 1.

  Set Internet Explorer as your web browser default and check if it helps.

  Change the web browser by default

  http://Windows.Microsoft.com/en-GB/Windows7/change-your-default-Web-browser

  Method 2.

  You can reset Windows Media DRM by following this link & check if the problem persists:

  You may be unable to read content protected after your computer hardware changes

  Method 3.

  How to convert protected WMA to MP3 writing

  1 - Open your favorite CD burning software and insert the files protected by rights, you want to convert. Depending on the software, you can open the files in the pane to burn or drag and drop one in the pane. You can also rearrange the files in the pane if necessary.

  You must obtain the rights for all files that you are trying to convert. If the software cannot find the rights on your computer, it asks you to download them from Internet. In some cases, they could already be free, but in others, you will have to pay fees. Remember that the software will not burn anything until it makes contact with the digital rights on your computer.

  2 - Insert your choice (CD - R or CD - RW) disc in the CD drive. Wait for the software to recognize the CD and press the "Burn" button or the command to start the transfer of your songs. Conclusion of all other applications, including browsers, software of management of e-mail and games beforehand, as they can adversely affect the quality of the combustion process.

  When the process is complete, the software has usually ejects the disc by default. If it is not, manually eject the disc when you are prompted by the software it is finished.

  3. put the disk in the computer and open him ripping software. Go to the 'Options' menu under the 'Ripper' tab to specify the type of format (such as MP3), the file quality you want (for example, 'medium', 'right' or 'best') and the folder where songs should be torn and saved. Press the 'Rip' and have once again, no other programs open while this process is running.

  Your new MP3 files will be free of rights, you will be able to burn them to disc or use on any media player or device.

  4 - If you have opted for burning to a CD - RW, you can delete it now by opening your file Explorer, right click on the drive letter and select 'delete '.

  Refer to this article.

  Windows Media Player DRM: frequently asked questions: http://windows.microsoft.com/en-us/windows7/Windows-Media-Player-DRM-frequently-asked-questions

  I hope this helps.

• Migrate license error - "your browser is not supported. You must download the latest version.

  I have a new Win 7 laptop. I had for years the music will not play on this new PC. When I try to play songs, a browser window opens with "Migrate license error" - HELP!

  The error message said: "your browser is not supported (my default is Chrome), you must download the latest version." I have already installed IE8, but the error message open my browser Google Chrome (which is my default).
  What should I do now?
  http://drmlicense.one.microsoft.com/pdrm/en/welcome.asp?challenge=AAEAAae921MBo9jSzCrdXMDyGax0xwUbIRN7jv*bK5b7UOIChqJrkyvIwnD9Eq*c5euFqSbgT36qmcBSnoUFeSbAP0UjKqC0PkCVOe7PAUQCAaZYP2rBdivN2pVaHd6Z3F8d9R*roxkAIIVAivTw5mHCvFYxXD3P1UATGeXbFWM2Wc*TdnBwjKV00y*1J11hDrGl4qo4EXBNuDDkUXKGOnt*rSb3oxG5fANwLmi1c5Riwpzawp1k0Hp!bGMT0AoGtndREW! FwNnR & DRMVer = 1. & embedded = false

  Try this:

  1. reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle.

  2. right-click on the following link & select SAVE TARGET under... to download/save the file on your desktop: http://www.slipstick.com/doit/chromehtml.reg [1]

  2. double-click the file that you saved in # 2 above & accept invites him to MERGE with the registry data.

  3. reset Internet Explorer according to the instructions on this page: http://support.microsoft.com/kb/923737

  • For best results, check the option Remove personal settings .

  4. restart & test.

  ==================================================
  [1] source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

• "Your browser does not support iframes, please use a different browser.

  I take an online course and this message appears when it is time for me to take my comments to the chapter.

  While I'm able to pass the test, I can not press 'continue', so I can't submit my test results.

  At the bottom of the control box it says "your browser does not support iframes, please use a different browser."

  My OS is updated, I upgraded to Adobe Flash and Reader, but I have no idea how to solve this problem.  I really need to be able to present my test results and unfortunately I lost several hours trying to figure this out.

  Safari supports iFrames.  The problem is the web site.  Contact them for support.  Or download a browser like Opera or Dolphin kick in one of those web site

• "Your browser is not supported by Oracle BI Presentation Services"

  Hello
  
  I installed obiee11.1.1.5 on windows 7 and I'm using the latest version of Firefox 12.0. When I try to open analytical through firefox12.0 I get warning as "your browser is not supported by Oracle BI Presentation Services" and it opens in Internet Explorer but graphics do not appear. Can someone tell me the solution for this?
  
  Published by: Uma on April 26, 2012 05:24

  Hey Uma,

  you have administrator privileges? If not try to run the FF with the administrator id - right click on the file exe and say "Run as Administrator" and then type "subject: config" without the quotes in the FF homepage, then you should be good and go forward with the rest of the steps.

  Thank you
  RM

• Your browser does not support frames

  When I try to open the site internal ip (such as 10.44.2.10), I get an error: 'your browser does not support frames. I use Firefox beta 8. Firefox 7 opens this site without any problems, that is to say too.

  You get this message with this page?
  
  http://www.draac.com/framestest.html

• You try to create VHDX or another format not supported for this version of the server

  Hello

  I have a problem with vWorkSpace do not load VM and I really hope that someone here might be able to add comments. We run vWorkSpace v8.5 on a box of windows server 2012 and v6.1 Hyper-V on Windows Server 2008.

  After running then changing the main image, I've updated the image of our cloud. Once the update of the virtual machine would not load, giving the below error

  End of the action (create) (failed to create. CreateVM: Unable to create the virtual machine of provided information. : CreateVhdxDisk: try to create VHDX or other format not supported for this version of the server. Path to the virtual disk: .avhd - call stacks - to Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP)
  at HypervLocalExecutor.HvCreateVM (string strUser, strPwd, VmCreateData createData, String strDomainNameIP, VmResult String & result)
  to CHyperVClone.doClone (basic_string<>\,std::allocator > * nsHostName, basic_string<>\,std::allocator > * nsUsername, basic_string<>\,std::allocator > * nsPasswd, VmDefData * vmData, basic_string<>\,std::allocator > * strDomainIPaddress, NewVmInfo * newVmInfo)-> Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVhdxDisk (String parentDiskPath, String diskPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateDiskForVM (vmMgmntObj, String vmPath, VmCreateData ManagementObject & vmData, String & vhdPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVirtualMachine (VmCreateData vmData, String domainNameIP)
  at Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP))...
  5 March 2015 15:54:15 - 1392:8580511090155201372 - caught error: Stack Trace and stack Exception below:
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVhdxDisk (String parentDiskPath, String diskPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateDiskForVM (vmMgmntObj, String vmPath, VmCreateData ManagementObject & vmData, String & vhdPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVirtualMachine (VmCreateData vmData, String domainNameIP)
  at Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP)

  We believe that it is somehow to do with Hyper-V under Windows 2008 and vWorkSpace running on Windows 2012 - the VHDX format is not supported by the version of Hyper-V server. A glance online confirms this. So my question is, how update the master image changed the format VHD vWorkSpace wants to use and is there a way to assign vWorkSpace don't know this format?

  I have widely in search of a solution to this line and not found anything it either, nor there seems a clear way in the vWorkSpace console to change that.

  Thank you

  Hello

  I suspect that you have created a snapshot on your model.  It is not supported, if you delete the snapshot so that the .avhd is merged to the vhd/vhdx and update the model in vWorkspace again.  If this does not work, you will need to delete the model of vWorkspace and then re-import.

  Concerning

  Paul

• Try to activate the Windows Narrator and get your license is not valid for this computer

  I try to activate the Windows Narrator for my son who is visually impaired and all he repeats to me "warns your license is not valid for this computer" I can't find anything that tells me what license is not valid.

  Download and run this tool of validation. If all goes well he will identify what is "not valid", or at least eliminate some possibilities:

  Validate Windows and Office using WGA Diagnostic tool -http://go.microsoft.com/fwlink/?linkid=52012

  Please download and run the tool diagnoses of Genuine:

  • http://go.microsoft.com/fwlink/?linkid=52012.
  • Save to your hard drive (the specifications vary according to the browser)
  • When downloaded, run it (double-click on it)
  • When the utility has finished its run, click on the "Copy" button

  Paste the report into your message here

  If you read this tip and it helps you, please click on the "useful Vote"button to "reward" myself with 'points'! '. Thank you

  Please click propose as answer to let others know the solution that worked for you

  Link to: Silverlight Applets mapping 2003 Menu for applications of office 2010 Ribbon

  Link to: research of 2007 addin commands PS: MS WHERE IS THE 2010 VERSION! HintHint!

  Link to: Menu Flash Applets mapping 2003 2007 Ribbon for all office applications

• DMA between host and target FPGA is not supported for this remote system.

  I try to cover with my FPGA (on the cRIO-9002) of the RTO.  I have install upward of anOpen good VI reference without error, but as soon I try to access thefifo I error-63001 and the attached message wrote:

  Error-63001 occurredat reference FPGA VI opened in the target - multi rate - variables - fileIO_old.vi

  Possible reasons:

  NOR-RIO FPGACommunications framework: (Hex 0xFFFF09E7) DMA from the host to the FPGA targetis not supported for this remote system. Another method for controller of e/s or climatiqueLes associated with the FPGA target.

  What other I/O optionsdo I need to move the data asynchronously to the RTO for the FPGA. I have triedcreating memory, but it seems that I can't write to the memory of the RTOSside.

  We have also a 9012sitting around will using this cRIO rather solve this problem.

  I'm very very greenwhen it comes to LabView, so I apologize if this is an easy question.

  As stated in the readme of the driver NOR-RIO, DMA is not taken in charge from the host to the FPGA on the cRIO-900 x series. The cRIO-901 x supports DMA transfers between host and FPGA and FPGA to host all the cRIO-900 x series controllers only support transfers the FPGA host DMA. As a result, LabVIEW returns an error if you try to transfer using DMA controller for cRIO-900 x.

  The 9012 looks like the ideal solution, you are very lucky to have additional hardware laying around

• the size of your hard drive is not supported for this process. Please use a hard drive at least GB in size

  Whenever I try to use my restore disks of backup with the image of the system when I bought my Dell 8300 desktop computer I get this error message (your hard drive is not taken in charge for this process. Please use a hard drive at least GB in size.

  My computer crashed went to blue screen that wouldn't everything now I hear 4 beeps, finally I managed to do start on. I already ran the long diagnoses everything was fine.

  Here's my problem. I changed the Sata AHCI RAID mode I could create a partition then my Windows 7 downloaded CD Windows 7... my CD of drivers dell drivers, but now I'm unable to use my system restore CD to restore like I always do when I have a problem. When I changed the sata mode to AHIC on load it says (lack of operating system)

  I'm not very technical, so if someone can show me step by step on what I should do or give me a call [Admin Note: personal information removed] I would appreciate it a lot. I've added a few pictures as well

  

  

  Large. I am pleased that my DBAN guide has helped you.

  Now that you are on the factory settings, I advise Dell DataSafe Local Backup uninstall and upgrade to the latest version of Dell backup and restoration which has many bugs/improvements, including the ability to restore to another hard drive which is useful in case the hard disk fails in the future or you decide to upgrade later to an SSD. The XPS 8300 running perfectly with a SSD, I have mine put in place with one. Then you can create a Rescue Disk (external hard drive Bootable) or Backup factory (Bootable USB Flash Drive) that will be promoted the recovery compared to the facts media with Dell DataSafe Local Backup. See here for more details:

  http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery/

  Note This is not a UEFI BIOS (he missed just out on the passage to the UEFI) but may start from an external hard drive.

• Why do I see "your browser is not supported" on many sites with firefox 15?

  Some sites, like trello.com and many others still said that I seem to use the old browser, or that my browser is not taken in charge and ask me to download Firefox 4 or more.
  Is just irresponsible web developers, who put this sign for any browser except those in a list, and which then forget to update the list? Or is it a problem with FF itself?
  There is no simple workaround solution without using UserAgent change plugins?

  Hello Chertik89, maybe the firefox useragent (information that the browser sends to websites to identify) got crushed or damaged - please refer to the following article on how to reset: https://support.mozilla.org/en-US/kb/websites-say-firefox-outdated-or-incompatible#w_other-causes

• When I try to download music from Amazon tells your browser is not supported

  Your browser don't is not supported message continues to come when I try to access the library on amazon even if I have the latest update of safari

  Try Firefox or Chrome.

• Computer laptop AUTO Detection - your product is not supported by this site

  I reinstalled Windows 7 successfully and decided to see if there were updates of Toshiba. The above message has been received. It's never happened before.
  I have aToshiba Satellite L350-277. PSLD4E-00E004MD
  WIndows 7 Edition Home Premium.

  I tried AUTO Detect, I tried to enter the information manually. I enter the family then details series but when I try to enter the ModelNo, L350-227, it is not there to choose. I know I'm correct (UK) web site. It seems that all of a sudden my laptop does not exist. When I reinstalled Windows, I got my connection Wireless running and connected automatically to Toshiba laptop, I got the serial number which is the same as what is on the underside of the laptop.
  Anyone got any ideas?

  >... but when I try to enter the ModelNo, L350-227, he's not there to choose.
  If you access section carefully, you will see that there is no option for the name of the template, just for the model and the model number for your laptop is PSLD4E.
  This model is specific for certain configuration of model and material. So when you choose this model number, you will get the list of all the important factors, tools and utilities for your laptop model.

  Generally speaking, all with tracks of updates simply and automatically. If you use the factory settings and the Toshiba recovery image it contains small tool called TEMPRO. This control of the tool if some updates are available and you will be informed if a new version is available.

  If you use clean install of the OS, you can download and install TEMPRO more.

• Was working and now get this message: this module requires java to work, but your browser doesn't support java not. How can I fix it?

  I'm trying to access a web application (webmin) and I get the following error message:

  This module requires java to work, but your browser does not support java

  It was working before. Chrome works fine, but I prefer firefox. One of my clients is having the same problem but others using firefox isn't the problem.

  I understand that you are under Linux.

  I had this same problem and fixed it by adding the package icedtea6-plugin on Ubuntu. IcedTea6-plugin is a plugin for web browser to run Java applets.

• Your tv does not support the protection of the content of this program. Replace the cable HDMI TV com

  "Your tv does not support the protection of the content of this program. Replace the hdmi to the TV with component cables cable will allow you to view the program.

  I get this message when you try to watch HBO from Directv. DirecTV said it is because my tv does not support HDCP (I have KDL-46SL140), but it actually does. Anyone else having this problem?

  Hi Tom,

  Welcome to the community of Sony!

  This TV is compatible with HDCP you mentioned. Try the steps mentioned on the page below to resolve this issue:

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C387911

  Please indicate the solution as accepted, if you find this information useful.

  Thank you for your message.