Monitoring of the access of remote logon to my switch 3750

Similar Questions

• Monitoring of the Access Point

  Dear all,

  I have WCS and WLC with 90 LWAP Access Points. I joined the WCS and WLC and I am able to see all the LWAP in the GUI of WCS.

  The requirement is, when ever some LWAPs are down, I want to get an alert somehow to report it. Now, without knowing how to do it, I just saw the total quantity and if some LWAP is off, I find it difficult to find one that is broken.

  Can you please suggest me the appropriate method to get the solution

  RBK

  Hello rbk,.

  for simplicity, you can try to change the name of the access point to their specific locations. draw the map of the ap. Once they are in offline mode you will immediately see that ap is declining and where they are, first of all by the names of ap, then by their current location.

  It's better to do before setting the each AP. but still feasible if the AP is already set. you will have more work, however.

  have your floor plan ready with the exact locations of the AP. Note the mac address you set the AP once the ap registers with the controller, you can match with the floor plan and change the name of the access through its exact location point. example Bldg1-GF-AP01-lobby, Bldg1-GF-AP02-Hall, Bldg1-1F-AP01-reception... etc...

  import map in the WCS and assign the accordngly to the ap.

  You'll know exactly which ap is turned off and where exactly.

  hope this helps!

• Is there a way to trace the person with remote access to my pc

  I need to prove I know what I'm talking about when I said to this person sabatoged my pc and he denies it, because I want to repay him what I spent to do repair.

  Hello

  What is the operating system installed on the computer?

  How to determine whether a computer is running a 32-bit version or the 64 bit version of the Windows operating system: http://support.microsoft.com/kb/827218

  You will not be able to get this information from the event viewer, and it is not possible to track this information.

  As a precaution, you try to uncheck the options for Remote Assistance policy to disable the connection.

  Follow these steps:

  a. Click Start, go to control panel and select System.

  b. in the system, select advanced in the left pane system settings.

  c. in system properties, uncheck the options in remote assistance and Remote Desktop.

  You can also check and remove any third-party remote access program is running on the system.

  If you think that any activity of viruses on your computer, see this article.

  How can I remove a computer virus? : http://windows.microsoft.com/en-us/windows7/how-do-i-remove-a-computer-virus

  Note:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must activate it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps.

• The Routing and remote access could not start, error 214500037 (0x80004005)

  My windows server 2003 r2, failed to start the Routing and remote access services. And in the event an observer log, it has error code
  Event ID: 7024, with service specific error 2147500037 (0x80004005)
  I tried to reset tcp/ip and replace ias.mdb and dnary.mdb by a new, but it did not work.

  Thank you

  Hi budhihartono,

  Since you are facing problems with windows server 2003 r2, it would be better suited in the Technet Windows forum. Please post your question in the following TechNet Windows server forum to improve assistance:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• SE error message: the local policy of this system does not log in an interactive way, trying to access a remote desktop connection.

  Original title: the local policy of this system does ot allows you to open an interactive session

  I get this error message when you try to access a remote desktop connection.  The local policy of this system does ot allows you to open an interactive session

  Hi CamilleHolt,

  1. were you able to use the before remote desktop connection?

  You can try the following steps and check if it helps.

  a. Click Start, point to settings and then click Control Panel.

  b. double-click System and select the remote settings and then click the Remote tab.

  c. click Select users, and then add the name of the user account

  d. click Add and then click OK.

  Note: Adding users to the remote desktop group requires that you are connected via an administrator account.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer.

• How to access Windows 8 PC on the Internet with remote desktop connection?

  Hello

  Can someone tell me how to access Windows 8 PC on the Internet with remote desktop connection?

  I'm good with the software and I have used many Microsoft software since the 1980s. So I like Microsoft products, but since they have outsourced their tech support, you can't support quality even if you pay for it. I followed all the instructions in the Windows 8 will help about DRC setting screens, but I can't connect unless I'm on the same home network. Here are the details:

  I have a desktop PC with Windows 8 Pro and I have authorized the DRC. I tried two settings in system properties:

  1. Allow connections to this computer remotely.
  2. That allow the connection of computers running Office remotely with authentication NLA.

  I also turned on both private and Public Windows Firewall settings > allow an App or feature through Windows Firewall.

  I have installation then DRC to my laptop with Windows 8 (standard edition, not the Pro version). I have a DRC using the full name of the computer and other DRC using the static IP address for my ISP Desktop connection.

  I use the user account administrator Windows for connections of DRC of the laptop.

  I cannot get this to work on the Internet from a location outside my house with another ISP connection. The only way it works if I'm uncomfortable with the laptop using the same network home.

  I called Dell tech support and it is always useless and just a more aggravating waste of an hour to talk to their support of technique outsourced in India (who barely even understand English) and then they hang up the phone as it was supposed to be disconnected. I also called Microsoft support and lost more than an hour to speak to their outsourced tech support in the Philippines (and as support of the India, they hang up or 'disconnect' when they cannot answer your question and they go account learn you more about Windows while they do). U.S. tech companies use AMERICANS more for their technical support so their customers can get people who actually care about doing a good job and can actually understand English?

  So if someone who knows using Windows 8 for DRC on the Internet has some tips, then it would be greatly appreciated.

  Thank you!!

  P.S. If anyone is offended by my comments about the ugly, incompetent, stupid providing "technical support" in India or the Philippines - Nevermind! You go ahead and waste hours of your time talking to some Morón in these countries, who barely understands English and then 'disconnects' the call when they know that you realize that they are clueless and have all the answers.

  Take a look at no - IP.com or dyndns.com, and then use your host.domain:3389 of no.-ip/dynDNS or run RelaVNc SErver that is running on port 5900 by default.  Server options allow you to change the port as well if necessary.

• Linux or Windows cmd iDRAC access tool and change the settings of the bios/iDRAC remotely.

  Hello

  Is it possible to change the settings of the bios/iDRAC remotely via the tool command line Linux or windows for iDRAC8 based server?

  If so could you please provide the download location?

  w*w.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=6RWMR

  You can install on a Windows machine and use the command "racadm" command line.

• Click on the button "display remote content" content remote does not show. If I go back to e-mail even later "display remote content" is not on the page.

  The "issue" essentially lines the problem.
  No distance shows content when the user clicks on the button "view remote content. Once it has been clicked on a specific email, if I go back to the same email, the button "display remote content" is not on the e-mail page and no remote content shows again in the body of the email.
  I use an updated version (24.4.0) of Thunderbird.

  The problem is often caused by anti programs anti-virus and other security software blocking Thunderbird to get the remote images. The GET for images using a web port usually and some security software not see Thunderbird as a browser and block access.

• Unable to see the Collections in remote desktop Services in Server Manager

  It doesn't seem to be a category for Windows Server for some reason, so I apologize if this is in the wrong category:

  We recently had an administrator leave our of the it group, and he was the one who had set up our fund services / remote server.  Recently, we wanted to deploy another remote application and found that we were not able to see the "Collections" option in the server in remote desktop services manager.  The only option listed is "servers".  However to reactivate the account administrator and the server like him gave us all permissions to see the option of Collections and to deploy another remote application.

  My question would be, this is a policy of setting Group / somewhere that is limiting the other users of the full access to Office services in Server Manager remotely.  I looked everywhere on the server (and google) to see if I could find where this setting is vain.  Any suggestions/help would be greatly appreciated.

  Thank you!
  Heda

  Hello

  Server forums are in an another Microsoft Community to it.

  This community is mainly for users.

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Help! Aspire 5735 laptop with broken screen does not recognize external monitor after the factory restore

  I have an ACER Aspire 5735, running horrible Vista that never worked from the beginning, always locked up, media player never worked, on, on, and after about a year my dog took in the power cord and threw out of the table and the broken screen. I used it with an external monitor for a while, but it was even worse after that and after that he take to get fixed yet has proceeded to run super slow, always locked up, refused to stop or start upward normally, and so he sat in a closet for about 3 years.

  I took it out a week ago to see if I could at least use it for my kids to friends to play on, but that she still had so many questions, I decided to do a factory restore. And of course the recovery disks that I did when I got it do not work and are not yet recognized by the computer. So I went online and has used a method that I found there by rebooting and hitting the keys ALT F10 until I was at the factory reset option. It worked GREAT! Except once the computer has restarted and opened up to windows deleted monitor and I can't do anything with the computer because apparently it does not recognize that it is hooked to an external monitor on the restore to factory settings! Help!

  She does not recognize the monitor as it has been restarted and was even the windows start the display of the icon, but as soon as it loads the screen becomes black with just the graphics "monitor is on but not connected to what either" floating around.

  Is it possible to access something in the BACK or other so he could recognize the external monitor?  What is finally toast?

  Connect the external monitor to the laptop.

  Hold down the FN key and press the F4 key. Check if you get a display on the external monitor.

• What are the solutions for remote use unauthorized computer via a virtual private network?

  Dell Dimension E310.  Windows XP. Professional.   "Media Center". 5 years old.  Stand alone computer.  Unsolicited 'demand' come across the screen for remote access.  Wallpaper, next to the clock, someone downloading of graphics file "Accelerator" without authorization.   Called internet provider.  They claim that they do not deal with the configuration of the virtual private network. Tech said there is more than one device connected to my computer!
  I went to "Computer management" and delete all except myself as a user and the administrator.  Obviously, too late as a person UNKNOWN has defined itself as "NT Authority\Authenticated Users".  Locked computer: would not recognize my password.
  Formatted drive / reinstalled windows.  Able to use the computer for "allocation of 7 days; my computer then froze again.  AT and T Tech indicates that UNKNOWN use of my computer and no recourse.  Are there solutions to the unauthorized use?

  Hello

  I suggest you post your question Forums Technet for assistance on this issue.

  Windows XP Service Pack 3 (SP3)

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• What is the difference between the activation of remote desktop and adding a 'connection in network connections.

  What is the difference between the activation of remote desktop and adding a 'connection in network connections.

  Hi ChadCrowell,

  Remote Desktop connection allows remote control of your Windows XP Professional computer from another computer running Windows XP Professional or an earlier version of Windows.

  Reference: How to use the Windows XP Professional Remote Desktop feature?

  By creating an incoming connection, a computer can act as a remote access server is running Windows XP Professional, Windows 2000 Professional

  Reference: To make an incoming network connection

  Hope the helps of information.

• Can you assign the time of windows logon minutes rather than hours?

  Can you assign the time of windows logon minutes rather than hours?

  If you are referring to the TIME parameter net user, which is limited to increments of one hour.

  If you want to control (and the ability to force logoff as well), you will need to use a third party software.  Access Boss a 15 minute granularity.  I'm sure like many other applications, probably some of free.

  If you only want to restrict Internet access (rather than access to the computer itself), your router may be able to restrict access with granularity to minutes.  "Parental control" software, such as NetNanny, also restrict Internet access, although that usually not at the minute.

• turn off the "allow for remote assistance" setting prevents someone view my computer remotely?

  original title: Hi, I wonder, if someone has access to my ip address and I want to prevent them from view remotely or even control my activities, turn off the "allow for remote assistance" setting prevent from coming into my computer?

  Hi Dom.A

  
  Yes, if you have given access or invited a person to have access remotely from your computer, then definitely disabled this option helps you. Refer to the following links for assistance on the question and check.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-remote-assistance-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happens-when-I-enable-Windows-remote-assistance

   

  I hope this helps.

• Access to remote files blackBerry Z10

  I don't have a problem with the XP pc, can access it remotely. my Vista pc is problematic, most of the time it shows "offline" and even when 'online' I can't always access shared folders.

  Connected with link PCs, the two pc is matched, both have active WiFi.

  Today, pilots would not charge when I plugged the USB Vista, the Z10 restarted with no luck.

  Link uninstalled and re-installed, loading drivers and has worked perfectly, disconnected Z10, Lo an behold, remained connected to WiFi.

  Wonder for how long.